Skip to Content

574 Results Found

  • Article
  • Open Access
3 Citations
2,705 Views
18 Pages

20 April 2023

Firstly, the properties and the microstructure evolution of the solid-solution process of Mg-5 wt.%Sn were studied. From the motion analysis of resistivity and microhardness during solution treatment, the reasonable solution technology of Mg-5 wt.%Sn...

  • Article
  • Open Access
33 Citations
4,929 Views
13 Pages

Effect of the Solid Solution and Aging Treatment on the Mechanical Properties and Microstructure of a Novel Al-Mg-Si Alloy

  • Yan Chen,
  • Wu Wei,
  • Yu Zhao,
  • Wei Shi and ,
  • Xiaorong Zhou,
  • Li Rong,
  • Shengping Wen,
  • Xiaolan Wu,
  • Kunyuan Gao and
  • Zuoren Nie
  • + 6 authors+ 1 author

4 November 2023

A novel Al-Mg-Si aluminum alloy with the addition of the micro-alloying element Er and Zr that was promptly quenched after extrusion has been studied. The solid solution and aging treatment of the novel alloy are studied by observing the microstructu...

(This article belongs to the Special Issue Metallic Materials: Structure Transition, Processing, Characterization and Applications)
  • Article
  • Open Access
3 Citations
4,343 Views
9 Pages

The formation phenomena of silver carbonate (Ag2CO3)–silver iodide (AgI) solid solutions were investigated by X-ray diffraction, thermogravimetry-differential thermal analysis, and electrical conductivity measurement. Results revealed that AgI and Ag...

(This article belongs to the Section Innovations in Materials Science and Materials Processing)
  • Article
  • Open Access
10 Citations
3,460 Views
23 Pages

Disclosing the Biocide Activity of α-Ag2−2xCuxWO4 (0 ≤ x ≤ 0.16) Solid Solutions

  • Paula Fabiana dos Santos Pereira,
  • Camila Cristina De Foggi,
  • Amanda Fernandes Gouveia,
  • Ivo Mateus Pinatti and ,
  • Luís Antônio Cabral,
  • Eva Guillamon,
  • Iván Sorribes,
  • Miguel A. San-Miguel,
  • Carlos Eduardo Vergani and
  • Juan Andrés
  • + 10 authors+ 5 authors

13 September 2022

In this work, α-Ag2−2xCuxWO4 (0 ≤ x ≤ 0.16) solid solutions with enhanced antibacterial (against methicillin-resistant Staphylococcus aureus) and antifungal (against Candida albicans) activities are reported. A plethora of technique...

(This article belongs to the Collection Feature Papers in Materials Science)
  • Article
  • Open Access
1 Citations
724 Views
15 Pages

Evolutions in Microstructure and Properties of Cu-Ni-Si-Mg-Mn Multi-Element High-Solute Alloy During a Short-Time Solid Solution Treatment, Aging, and Cold-Rolling

  • Yuhang Zhang,
  • Xiaolong Feng,
  • Qingke Zhang,
  • Xiang Lu and ,
  • Cheng Xu,
  • Xinli Zhang,
  • Feng Liu and
  • Zhenlun Song
  • + 3 authors+ 0 author

8 April 2026

To obtain ultrahigh strength Cu alloy strip for board-to-board connectors, a CuNiSiMgMn multi-element high-solute alloy was designed, and high-temperature short-time solid solution was utilized to optimize the properties of this alloy. The evolution...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
6 Citations
1,870 Views
12 Pages

Effects of Ni Content and Heat Treatment on the Properties, Microstructures, and Precipitates of Cu-0.2 wt% Be-x wt% Ni Alloys

  • Yuhan Meng,
  • Bowen Zhang,
  • Jinyun Wang,
  • Zhenyu Hong and ,
  • Hongliang Zhao,
  • Na Yan and
  • Liang Hu
  • + 2 authors+ 0 author

8 February 2024

Cu-Be alloys exhibit excellent comprehensive performance in electrics, thermotics, and mechanics, and hence, they attract much attention. Among them, low-Be copper alloys are more environmentally friendly and promising. This study explores the effect...

(This article belongs to the Section Metals and Alloys)
  • Feature Paper
  • Article
  • Open Access
1 Citations
3,629 Views
17 Pages

On Temperature Dependence of Microstructure, Deformation Mechanisms and Tensile Properties in Austenitic Cr-Mn Steel with Ultrahigh Interstitial Content C + N = 1.9 Mass.%

  • Elena Astafurova,
  • Sergey Astafurov,
  • Galina Maier,
  • Irina Tumbusova and ,
  • Eugene Melnikov,
  • Valentina Moskvina,
  • Marina Panchenko,
  • Kseniya Reunova and
  • Nina Galchenko
  • + 4 authors+ 0 author

13 June 2020

The microstructure, deformation mechanisms, tensile properties and fracture micromechanisms of ultrahigh-interstitial austenitic Fe-22Cr-26Mn-1.3V-0.7C-1.2N (mass.%) steel were investigated in wide temperature interval. After conventional homogenizat...

(This article belongs to the Special Issue Creep and Deformation of Metals and Alloys at Elevated Temperatures)
  • Article
  • Open Access
5 Citations
1,828 Views
23 Pages

Microstructure and Properties of Laser-Remelted Al-Cu-Mn Alloy

  • Jibo Hou,
  • Huiru Li,
  • Qingnan Dong and
  • Zhanyong Zhao

21 June 2025

This article studies the effects of a laser remelting treatment on the microstructure and properties of Al-Cu-Mn alloy surfaces, as well as the effects of a heat treatment process on the microstructure and mechanical properties of the matrix zone and...

(This article belongs to the Special Issue Recent Developments in Laser Additive Manufacturing of Metallic Materials)
  • Article
  • Open Access
15 Citations
3,580 Views
11 Pages

Influence of Forging and Heat Treatment on the Microstructure and Mechanical Properties of a Heavily Alloyed Ingot-Metallurgy Nickel-Based Superalloy

  • Valery Imayev,
  • Shamil Mukhtarov,
  • Kamilla Mukhtarova,
  • Artem Ganeev and ,
  • Ruslan Shakhov,
  • Nikolay Parkhimovich and
  • Aleksander Logunov
  • + 2 authors+ 0 author

30 November 2020

The newly designed ingot-metallurgy nickel-based superalloy SDZhS-15 intended for disc applications at operating temperatures up to 800–850 °C was subjected to homogenization annealing and canned forging at subsolvus temperatures, followed...

(This article belongs to the Special Issue Creep and Deformation of Metals and Alloys at Elevated Temperatures)
  • Article
  • Open Access
3 Citations
1,655 Views
13 Pages

Effects of Cold Deformation and Heat Treatments on the Microstructure and Properties of Fe-15Cr-25Ni Superalloy Cold-Drawn Bars

  • Yunfei Zhang,
  • Zhen Zhang,
  • Zhiyan Sun,
  • Yingli Zhao and ,
  • Yi Cui and
  • Zhongwu Zhang
  • + 1 author+ 0 author

4 December 2024

The combination of cold deformation and solution aging is an important technological route for the bar processing of superalloy fasteners. The microstructure evolution and mechanical properties are intimately related to the process parameters. In thi...

(This article belongs to the Special Issue Mechanical Properties and Applications for Nanostructured Alloys)
  • Article
  • Open Access
5 Citations
3,943 Views
12 Pages

3 May 2020

Serration phenomena, in which stress fluctuates in a saw-tooth shape, occur when a uniaxial test is performed on an aluminum alloy containing a solid solution of solute atoms. The appearance of the serrations is affected by the strain rate and temper...

(This article belongs to the Special Issue Dislocation Mechanics of Metal Plasticity and Fracturing)
  • Article
  • Open Access
14 Citations
3,736 Views
13 Pages

(Ti,Sn) Solid Solution Based Gas Sensors for New Monitoring of Hydraulic Oil Degradation

  • Ambra Fioravanti,
  • Pietro Marani,
  • Giorgio Paolo Massarotti,
  • Stefano Lettieri and ,
  • Sara Morandi and
  • Maria Cristina Carotta
  • + 1 author+ 0 author

28 January 2021

The proper operation of a fluid power system in terms of efficiency and reliability is directly related to the fluid state; therefore, the monitoring of fluid ageing in real time is fundamental to prevent machine failures. For this aim, an innovative...

(This article belongs to the Special Issue TiO2-Based Nanostructures, Composites and Hybrid Photocatalysts)
  • Article
  • Open Access
10 Citations
3,735 Views
13 Pages

Effects of Mg Content on the Microstructural and Mechanical Properties of Al-4Cu-xMg-0.3Ag Alloys

  • Talal T. Alshammari,
  • Hamad F. Alharbi,
  • Mahmoud S. Soliman and
  • Muhammad F. Ijaz

2 October 2020

The aim of the present research is to manipulate the amenability between composition-microstructure-property relationships in two kinds of Al-4Cu-xMg-0.3Ag alloys (where x = 0.4 and 1.4) having different Cu/Mg ratios (~9.54 and ~2.87). The effect of...

(This article belongs to the Special Issue Advance in Alloy Materials)
  • Article
  • Open Access
6 Citations
3,953 Views
21 Pages

Optimisation of Heat Treatment Process for Damping Properties of Mg-13Gd-4Y-2Zn-0.5Zr Magnesium Alloy Using Box–Behnken Design Method

  • Jun Zhang,
  • Ziming Kou,
  • Yaqin Yang,
  • Baocheng Li and ,
  • Xiaowen Li,
  • Ming Yi and
  • Zhongjian Han
  • + 2 authors+ 0 author

1 February 2019

High damping magnesium alloys have poor mechanical properties, so it is necessary to investigate the damping properties of high-strength wrought magnesium alloys to effectively reduce vibration and noise in mechanical engineering. The aim of this wor...

  • Article
  • Open Access
2 Citations
1,136 Views
14 Pages

Investigation on Tensile Behavior of Solid Solution-Strengthened Ni-Co-Cr-Based Superalloy During Long-Term Aging

  • Wanqi Hou,
  • Xianjun Guan,
  • Jiaqi Wang,
  • Jinrong Wu and ,
  • Lanzhang Zhou and
  • Zheng Jia
  • + 1 author+ 0 author

30 June 2025

This study investigated how long-term aging (750 °C and 950 °C) affects the microstructure and room-temperature tensile properties of the Ni-Co-Cr superalloy GH3617. Characterization (SEM, EDS, EBSD) showed that initial aging (750 °C, 500...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
7 Citations
2,385 Views
17 Pages

Kinetic Study of Oxidation of Ag-Sn-Zn Solid Solution Powders via Hot Mechanochemical Processing

  • Danny Guzmán,
  • Augusto Figueroa,
  • Alvaro Soliz,
  • Alexis Guzmán and ,
  • Claudio Aguilar,
  • Felipe M. Galleguillos-Madrid,
  • Carlos Portillo and
  • Syed Ismat Shah
  • + 3 authors+ 0 author

19 October 2024

Ag-based electrical contact materials are essential in low-voltage devices such as relays, switches, circuit breakers, and contactors. Historically, Ag-CdO composites have been preferred due to their superior electrical and thermal conductivities, re...

(This article belongs to the Special Issue Study on Advanced Metal Matrix Composites (2nd Edition))
  • Article
  • Open Access
1 Citations
2,317 Views
10 Pages

Phase Formation and Properties of Multicomponent Solid Solutions Based on Ba(Ti, Zr)O3 and AgNbO3 for Environmentally Friendly High-Efficiency Energy Storage

  • Dmitry V. Volkov,
  • Ekaterina V. Glazunova,
  • Lydia A. Shilkina,
  • Aleksandr V. Nazarenko and ,
  • Aleksey A. Pavelko,
  • Vyacheslav A. Bobylev,
  • Larisa A. Reznichenko and
  • Ilya A. Verbenko
  • + 3 authors+ 0 author

26 August 2023

This paper investigates the processes of phase formation of solid solutions of (1 − x)BaTi0.85Zr0.15O3 − xAgNbO3 where x = 0, 0.03, 0.06, 0.09. The optimal temperatures of synthesis and sintering are determined. From the results of X-ray...

(This article belongs to the Special Issue Advances in Ferroelectric, Construction, Luminescent Ceramics and Crystals)
  • Article
  • Open Access
7 Citations
2,946 Views
14 Pages

Ab Initio Modeling of CuGa1−xInxS2, CuGaS2(1−x)Se2x and Ag1−xCuxGaS2 Chalcopyrite Solid Solutions for Photovoltaic Applications

  • Jurij Grechenkov,
  • Aleksejs Gopejenko,
  • Dmitry Bocharov,
  • Inta Isakoviča and ,
  • Anatoli I. Popov,
  • Mikhail G. Brik and
  • Sergei Piskunov
  • + 2 authors+ 0 author

20 June 2023

Chalcopyrites are ternary semiconductor compounds with successful applications in photovoltaics. Certain chalcopyrites are well researched, yet others remain understudied despite showing promise. In this study, we use ab initio methods to study CuGaS...

(This article belongs to the Section A2: Solar Energy and Photovoltaic Systems)
  • Article
  • Open Access
7 Citations
2,785 Views
8 Pages

9 December 2018

An alternating magnetic field (AMF)/Ag multi-alloying combined process was applied to the solidification of Cu–14Fe alloy to study its effects on the microstructure and properties of the resulting samples. The applied AMF and Ag multi-alloying...

  • Article
  • Open Access
13 Citations
3,849 Views
15 Pages

17 December 2019

Excessive growth of intermetallic compounds (IMCs) during service affects the reliability of solder joints, so how to suppress the growth of IMC thickness at the interface in solder joints becomes a widespread concern. In this work, the interfacial r...

  • Article
  • Open Access
10 Citations
2,536 Views
15 Pages

21 July 2024

Bi-doped Sn–Ag–Cu (SAC) microelectronic solder is gaining attention for its utility as a material for solder joints that connect substrates to printed circuit boards (PCB) in future advanced packages, as Bi-doped SAC is reported to have a...

  • Communication
  • Open Access
3 Citations
2,538 Views
11 Pages

24 August 2023

Crack-free Cu alloy coating has been fabricated on Al alloy substrate with the existence of a Ag buffer layer. The Cu alloy coating had 12 at.% Al and 45 at.% Ag, which contributed to the formation of Cu solid solution and the eutectic phase (transfo...

  • Article
  • Open Access
1 Citations
2,219 Views
12 Pages

16 May 2023

In order to study the strengthening effect of Mg–X (X = Zn, Ag) alloys, solid solution structures of Mg54, Mg53X1 and Mg52X2 (X = Zn, Ag) with atomic contents of 1.8 at.% and 3.7 at.% were established, respectively. The structural stability, te...

(This article belongs to the Special Issue Advanced Crystalline Materials, Mechanical Properties and Innovative Production Systems)
  • Article
  • Open Access
1 Citations
2,252 Views
11 Pages

Aging Treatment Induces the Preferential Crystallographic Orientation of αs in the Near-α Titanium Alloy Ti60

  • Bin Liu,
  • Chenglu Liu,
  • Xuewen Li,
  • Hao Wu and ,
  • Kesong Miao,
  • He Wu and
  • Rengeng Li
  • + 2 authors+ 0 author

20 May 2024

In this article, we subjected the Ti60 alloy to solid-solution treatment at 1020 °C and aging treatment at 600 °C, respectively, achieving a bimodal microstructure. The microstructures obtained after aging treatment showed no significant diff...

(This article belongs to the Special Issue Light Alloys and Composites)
  • Article
  • Open Access
7 Citations
2,294 Views
13 Pages

3 August 2023

A weldable Al–Mg–Zn–Sc alloy was produced using vacuum induction melting and an argon-protected casting method to achieve high strength and ductility, and the effects of heat treatment on the microstructure evolution and mechanical...

  • Article
  • Open Access
7 Citations
2,473 Views
13 Pages

Unveiling the Photocatalytic Potential of BiAgOS Solid Solution for Hydrogen Evolution Reaction

  • Oumaima Ben Abdelhadi,
  • Majid El Kassaoui,
  • Hajar Moatassim,
  • Ahmed Kotbi and ,
  • Mohamed Balli,
  • Omar Mounkachi and
  • Mustapha Jouiad
  • + 2 authors+ 0 author

22 November 2024

The growing emphasis on green energy has spurred momentum in research and development within the field of photocatalytic materials, particularly for green hydrogen production. Among the most abundant oxides on Earth, oxychalcogenides stand out for th...

(This article belongs to the Special Issue Advanced Nanomaterials for Photocatalysis)
  • Article
  • Open Access
12 Citations
3,547 Views
20 Pages

Influence of Various Heat Treatments on Microstructures and Mechanical Properties of GH4099 Superalloy Produced by Laser Powder Bed Fusion

  • Jiahao Liu,
  • Yonghui Wang,
  • Wenqian Guo,
  • Linshan Wang and ,
  • Shaoming Zhang and
  • Qiang Hu
  • + 1 author+ 0 author

27 February 2024

The microstructures and mechanical properties of a γ′-strengthened nickel-based superalloy, GH4099, produced by laser powder bed fusion, at room temperature and 900 °C are investigated, followed by three various heat treatments. The a...

(This article belongs to the Special Issue Additive Manufacturing and Microstructure Characteristics of Metallic Material)
  • Article
  • Open Access
2 Citations
1,578 Views
15 Pages

Effects of Solid–Solution Temperature on Microstructures and Mechanical Properties of 2200 MPa Grade Secondary Hardening Steel

  • Cheng Yang,
  • Yong Li,
  • Shun Han,
  • Xuedong Pang and ,
  • Ruming Geng,
  • Xinyang Li and
  • Chunxu Wang
  • + 2 authors+ 0 author

6 May 2025

With the increasing demands for mechanical properties of ultra–high–strength steels (UHSSs), enhancing their strength and obtaining an excellent strength–toughness matching have received widespread attention. In this paper, the infl...

  • Feature Paper
  • Article
  • Open Access
24 Citations
6,769 Views
12 Pages

Microhardness and In Vitro Corrosion of Heat-Treated Mg–Y–Ag Biodegradable Alloy

  • Marián Vlček,
  • František Lukáč,
  • Hana Kudrnová,
  • Bohumil Smola and ,
  • Ivana Stulíková,
  • Monika Luczak,
  • Gábor Szakács,
  • Norbert Hort and
  • Regine Willumeit-Römer
  • + 4 authors+ 0 author

11 January 2017

Magnesium alloys are promising candidates for biodegradable medical implants which reduce the necessity of second surgery to remove the implants. Yttrium in solid solution is an attractive alloying element because it improves mechanical properties an...

(This article belongs to the Special Issue Degradable Biomaterials Based on Magnesium Alloys)
  • Article
  • Open Access
1,875 Views
13 Pages

Impact of Heat Treatment on the Mechanical Properties and Fracture Morphology of Ti555211 Alloy

  • Yushe Gao,
  • Xiangyi Xue,
  • Yuxuan Du,
  • Xianghong Liu and ,
  • Huixian Gao,
  • Jianguo Wang and
  • Junfeng Xu
  • + 2 authors+ 0 author

12 July 2024

Heat treatment is important for optimizing the strength performance and improving the toughness of titanium alloys. In this study, we investigated the impact of three heat treatment methods (β-annealing, double annealing, and solid-solution and...

(This article belongs to the Special Issue Advances in Mechanical Properties and Structure of Metal and Metal Composites)
  • Article
  • Open Access
1 Citations
3,072 Views
12 Pages

23 April 2021

An experimental investigation was carried out to study the effects of solid solution treatment and aging treatment on the microstructures and mechanical properties of an Al-13Si-5Cu-2Ni alloy. The results show that the size of eutectic silicon decrea...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
  • Best Paper Award
17 Citations
5,979 Views
19 Pages

A Quasi-Intramolecular Solid-Phase Redox Reaction of Ammonia Ligands and Perchlorate Anion in Diamminesilver(I) Perchlorate

  • Lara Alexandre Fogaça,
  • Laura Bereczki,
  • Vladimir M. Petruševski,
  • Berta Barta-Holló and ,
  • Fernanda Paiva Franguelli,
  • Miklós Mohai,
  • Kende Attila Béres,
  • Istvan E Sajó,
  • Imre Miklós Szilágyi and
  • Laszlo Kotai
  • + 5 authors+ 0 author

The reaction of ammoniacal AgNO3 solution (or aq. solution of [Ag(NH3)2]NO3) with aq. NaClO4 resulted in [Ag(NH3)2]ClO4 (compound 1). Detailed spectroscopic (correlation analysis, IR, Raman, and UV) analyses were performed on [Ag(NH3)2]ClO4. The temp...

(This article belongs to the Special Issue Redox-Active Ligand Complexes)
  • Article
  • Open Access
40 Citations
15,818 Views
18 Pages

Amperometric Sensor for Detection of Chloride Ions

  • Libuse Trnkova,
  • Vojtech Adam,
  • Jaromir Hubalek,
  • Petr Babula and
  • Rene Kizek

15 September 2008

Chloride ion sensing is important in many fields such as clinical diagnosis, environmental monitoring and industrial applications. We have measured chloride ions at a carbon paste electrode (CPE) and at a CPE modified with solid AgNO3, a solution of...

  • Article
  • Open Access
4 Citations
2,336 Views
18 Pages

Effect of Atomic Ordering on Phase Stability and Elastic Properties of Pd-Ag Alloys

  • Xiaoli Chen,
  • Guangxiong Luo,
  • Yuxuan Cao and
  • Chaoping Liang

5 September 2024

Palladium (Pd) and its alloys, renowned for their good corrosion resistance, catalytic efficiency, and hydrogen affinity, find extensive use in various industrial applications. However, the susceptibility of pure Pd to hydrogen embrittlement necessit...

  • Article
  • Open Access
5 Citations
1,813 Views
13 Pages

Ampoule Synthesis of Na-Doped Complex Bromide Cs2AgBiBr6 with Double Perovskite Structure

  • Nigina K. Nosirova,
  • Rustam K. Kamilov,
  • Maqsudjon M. Ibrohimov,
  • Leonid S. Lepnev and ,
  • Mikhail O. Astafurov,
  • Alexander V. Knotko and
  • Anastasia V. Grigorieva
  • + 2 authors+ 0 author

7 March 2025

Compounds of the general composition A2BIBIIIX6 with a double perovskite (elpasolite) structure are currently considered as an alternative to lead halide perovskites APbX3 in electronics and photovoltaics due to their greater compositional flexibilit...

(This article belongs to the Special Issue Advanced Materials for Optical and Luminescence Applications)
  • Article
  • Open Access
10 Citations
4,464 Views
10 Pages

19 April 2018

The effects of T6 treatment (solid-solution and artificially aging at 200 °C) on the microstructure and corrosion properties of an Mg–4Sn–4Zn–2Al (TZA442) alloy were systematically investigated. The alloy exhibits a double-peak age-hardening behavior...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
4 Citations
1,298 Views
20 Pages

Effect of Hot Isostatic Pressure on the Microstructure Evolution of Ti-22Al-25Nb Alloy Formed by Selective Laser Melting

  • Jingjun He,
  • Haiou Yang,
  • Linhao Huang,
  • Jingyu Man and ,
  • Yuhan Wu and
  • Xin Lin
  • + 1 author+ 0 author

14 June 2025

The density of SLMed (Selective Laser Melting) Ti-22Al-25Nb alloy was improved through hot isostatic pressing (HIP) treatment, and the influence of HIP and solution aging on the microstructure of Ti-22Al-25Nb alloy in the as-deposited state was exami...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
16 Citations
4,260 Views
18 Pages

31 August 2019

We carried out a directed crystallization of a melt of the following composition (in mol. %): Fe 31.79, Cu 15.94, Ni 1.70, S 50.20, Sn 0.05, As 0.04, Pt, Pd, Rh, Ru, Ag, Au, Se, Te, Bi, and Sb by 0.03. The obtained cylindrical sample consisted of mon...

(This article belongs to the Special Issue Mineralogy of Noble Metals and “Invisible” Speciations of These Elements in Natural Systems)
  • Article
  • Open Access
333 Views
18 Pages

31 August 2026

In this study, an “oxide layer” was formed on the surface of Cu-0.97Cr-0.11Zr alloy sheets by introducing oxygen via a non-vacuum solid solution treatment, followed by vacuum solid solution and aging treatments to obtain a layered composi...

(This article belongs to the Special Issue Microstructural Characterization and Performance Optimization of Copper-Based Metallic Materials and Alloys)
  • Article
  • Open Access
12 Citations
6,410 Views
11 Pages

Noble Metal-Free Ceria-Zirconia Solid Solutions Templated by Tobacco Materials for Catalytic Oxidation of CO

  • Donglai Zhu,
  • Deliang Duan,
  • Yi Han,
  • Jiao He and ,
  • Yi He,
  • Yongjuan Chen,
  • Wei Zhang,
  • Zhiyin Yan,
  • Jiaqiang Wang and
  • Fagui Yuan
  • + 5 authors+ 0 author

9 September 2016

A series of ceria-zirconia solid solutions were synthesized using tobacco leaves, stems and stem-silks as biotemplates. A combination of physicochemical techniques such as powder X-ray diffraction (XRD), N2 adsorption/desorption measurement, scanning...

(This article belongs to the Special Issue Ceria-based Catalysts)
  • Article
  • Open Access
9 Citations
2,306 Views
14 Pages

29 September 2024

The effects of solid-solution and ageing treatments on the microstructure and mechanical properties of a GH4169 alloy made by wire arc additive manufacturing, micro-casting, and forging were researched. The microstructure, along with the size and typ...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
5 Citations
2,827 Views
11 Pages

21 March 2024

Al-Cu-Fe-Ce quasicrystalline-reinforced 6061 aluminum matrix composites were prepared through hot press sintering and treated with a solid solution and aging treatments. The influence of the solid solution and aging treatments on the microstructure a...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
2 Citations
2,401 Views
12 Pages

Characterization of CuAg Alloys with Low Ag Concentrations

  • Lorenzo Mosesso,
  • Salvatore Macis,
  • Annalisa D’Arco,
  • Augusto Marcelli and ,
  • Andrea Notargiacomo,
  • Marialilia Pea,
  • Bruno Spataro,
  • Vincenzo Stagno and
  • Stefano Lupi
  • + 4 authors+ 0 author

16 April 2024

Copper-based alloys designed to combine high electronic and thermal conductivities with high mechanical strength find a wide range of applications in different fields. Among the principal representatives, strongly diluted CuAg alloys are of particula...

  • Article
  • Open Access
21 Citations
5,808 Views
19 Pages

The State of Trace Elements (In, Cu, Ag) in Sphalerite Studied by X-Ray Absorption Spectroscopy of Synthetic Minerals

  • Nikolay D. Trofimov,
  • Alexander L. Trigub,
  • Boris R. Tagirov,
  • Olga N. Filimonova and ,
  • Polina V. Evstigneeva,
  • Dmitriy A. Chareev,
  • Kristina O. Kvashnina and
  • Maximilian S. Nickolsky
  • + 3 authors+ 0 author

20 July 2020

The oxidation state and local atomic environment of admixtures of In, Cu, and Ag in synthetic sphalerite crystals were determined by X-ray absorption spectroscopy (XAS). The sphalerite crystals doped with In, Cu, Ag, In–Cu, and In–Ag were...

(This article belongs to the Section Crystallography and Physical Chemistry of Minerals & Nanominerals)
  • Article
  • Open Access
2 Citations
3,240 Views
16 Pages

Three new heteroleptic Ag(I) complexes, labeled as [AgL(POP)]BF4 (1–3), were successfully synthesized and comprehensively characterized. Here, L represents 2,9-bis((E)-4-methoxystyryl)-1,10-phenanthroline (L1), 2,9-bis((E)-4-methylthiostyryl) -...

(This article belongs to the Special Issue Synthesis and Application of Luminescent Materials)
  • Article
  • Open Access
11 Citations
3,753 Views
14 Pages

28 August 2024

Inconel 625 deposited metal was prepared by gas metal arc welding. The solid solution treatment temperature was set at 1140 °C for 4 h using the DSC test method, followed by secondary aging at 750 °C/4 h and 650 °C/24 h. The specimens in...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
12 Citations
3,762 Views
19 Pages

Formation of Noble Metal Phases (Pt, Pd, Rh, Ru, Ir, Au, Ag) in the Process of Fractional Crystallization of the CuFeS2 Melt

  • Elena Fedorovna Sinyakova,
  • Inga Grigorievna Vasilyeva,
  • Aleksandr Sergeevich Oreshonkov,
  • Sergey Vladimirovich Goryainov and
  • Nikolay Semenovich Karmanov

7 September 2022

The quasi-equilibrium directional crystallization of the melt composition (at. %): Cu 24.998, Fe 25.001, S 49.983, with Ag 0.002, Pd 0.003, Ru 0.004, Rh 0.006, and Au, Pt, Ir (each as 0.001) was carried out. The crystallized cylindrical ingot consist...

(This article belongs to the Special Issue Precious Metals vs. Base Metals: Nature and Experiment)
  • Article
  • Open Access
1,188 Views
25 Pages

In dynamic equilibria, benzylsilicon pyridine-2-olate (BnSi(pyO)3, L) and benzaldehyde react with addition of the Si(pyO) moieties to the PhHC=O carbonyl group and formation of compounds BnSi(–O–C(H,Ph)–N(2-pyridone))x(pyO)3−x...

(This article belongs to the Special Issue Synthesis, Characterization and Application of Novel Coordination and Organometallic Complexes)
  • Article
  • Open Access
32 Citations
5,552 Views
16 Pages

Enhancing Mechanical Properties of the Spark Plasma Sintered Inconel 718 Alloy by Controlling the Nano-Scale Precipitations

  • Shuaijiang Yan,
  • Yun Wang,
  • Qingxiang Wang,
  • Chengsong Zhang and ,
  • Dazhi Chen and
  • Guodong Cui
  • + 1 author+ 0 author

13 October 2019

The present study aimed to optimize the phase constituents and mechanical properties of the spark plasma sintered (SPS) Inconel 718 (IN718) alloy. A series of heat treatment routes were designed based on the phase relations in IN718 and performed for...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
16 Citations
3,489 Views
13 Pages

Simultaneous Improvement of Strength, Ductility and Damping Capacity of Single β-Phase Mg–Li–Al–Zn Alloys

  • Xinhe Yang,
  • Yang Jin,
  • Ruizhi Wu,
  • Jiahao Wang and ,
  • Dan Wang,
  • Xiaochun Ma,
  • Legan Hou,
  • Vladimir Serebryany,
  • Iya I. Tashlykova-Bushkevich and
  • Sergey Ya. Betsofen
  • + 5 authors+ 0 author

12 January 2023

Body-centered cubic (BCC) Mg–Li alloy can be effectively strengthened by with the addition of Al and Zn. However, adding excessive amounts result in reduced mechanical properties and damping capacity of the alloy during subsequent heat treatmen...

(This article belongs to the Special Issue Preparation and Processing Technology of Advanced Magnesium Alloys)

of 12