Skip to Content

1,325 Results Found

  • Article
  • Open Access
6 Citations
6,005 Views
15 Pages

Sol–Gel Treatments to Flame Retard PA11/Flax Composites

  • Fabienne Samyn,
  • Maxence Vandewalle,
  • Séverine Bellayer and
  • Sophie Duquesne

7 October 2019

This work investigates the efficiency of sol–gel treatments to flame retard flax fabric/PA11 composites. Different sol–gel treatments applied to the flax fabrics were prepared using TEOS in combination with phosphorus and/or nitrogen cont...

  • Article
  • Open Access
19 Citations
12,535 Views
9 Pages

6 January 2014

Functionalized silica sols were obtained by the hydrolytic condensation of (γ-methacryloxypropyl)trimethoxysilane (MPMS), (γ-glycidyloxypropyl)trimethoxysilane (GPMS) and tetraethoxysilane (TEOS). Three different sols were obtained: MPS (derived...

(This article belongs to the Special Issue Polymer Colloids)
  • Article
  • Open Access
5 Citations
2,972 Views
17 Pages

Sol–Gel-Derived Silica/Alumina Particles for Enhancing the Mechanical Properties of Acrylate Composite Materials

  • Khaled Altwair,
  • Vladisav Tadić,
  • Miloš Petrović,
  • Andrija Savić and ,
  • Vesna Radojević,
  • Radmila Jančić Heinemann and
  • Marija M. Vuksanović
  • + 2 authors+ 0 author

24 July 2025

Silica/alumina composite particles were synthesized via the sol–gel method to promote fine dispersion and homogenous mixing. Aluminum chloride hydroxide served as the alumina precursor, while amorphous silica, obtained from rice husk, was direc...

(This article belongs to the Special Issue Advances in Composite Gels (3rd Edition))
  • Article
  • Open Access
12 Citations
3,275 Views
16 Pages

Enhanced Mechanical and Thermal Properties of Modified Oil Palm Fiber-Reinforced Polypropylene Composite via Multi-Objective Optimization of In Situ Silica Sol-Gel Synthesis

  • Nasrullah Mat Rozi,
  • Hamidah Abdul Hamid,
  • Md. Sohrab Hossain,
  • Nor Afifah Khalil and ,
  • Ahmad Naim Ahmad Yahaya,
  • Ahmad Noor Syimir Fizal,
  • Mohd Yusoff Haris,
  • Norkhairi Ahmad and
  • Muzafar Zulkifli
  • + 4 authors+ 0 author

29 September 2021

A multi-objective optimization of in situ sol-gel process was conducted in preparing oil palm fiber-reinforced polypropylene (OPF-PP) composite for an enhancement of mechanical and thermal properties. Tetraethyl orthosilicate (TEOS) and butylamine we...

(This article belongs to the Special Issue Natural Fibres and their Composites II)
  • Article
  • Open Access
12 Citations
4,734 Views
11 Pages

PZT Composite Film Preparation and Characterization Using a Method of Sol-Gel and Electrohydrodynamic Jet Printing

  • Yan Cui,
  • Hao Yu,
  • Zeshan Abbas,
  • Zixiang Wang and ,
  • Lunxiang Wang and
  • Dazhi Wang
  • + 1 author+ 0 author

24 April 2023

Lead zircon titanate (PZT) composite films were advantageously prepared by a novel hybrid method of sol-gel and electrohydrodynamic jet (E-jet) printing. PZT thin films with thicknesses of 362 nm, 725 nm and 1092 nm were prepared on Ti/Pt bottom elec...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
1,685 Views
12 Pages

28 June 2025

Phased-array ultrasonic transducers using sol–gel composites face challenges in terms of polarization uniformity when using conventional corona poling. Pb(Zr, Ti)O3 (PZT)/PZT composites with a thickness of 25 µm were fabricated on 3 mm th...

(This article belongs to the Special Issue Acoustic Transducers and Their Applications, 2nd Edition)
  • Article
  • Open Access
17 Citations
4,924 Views
15 Pages

Al2O3 + Graphene Low-Friction Composite Coatings Prepared By Sol–Gel Method

  • Bożena Pietrzyk,
  • Sebastian Miszczak,
  • Ye Sun and
  • Marcin Szymański

4 September 2020

In this work, Al2O3 + graphene coatings were prepared using the sol–gel method. The aim of the study was preliminary determination of the influence of size and amount of graphene nanoplatelets on morphology, chemical structure, and basic tribol...

(This article belongs to the Special Issue Functional Ceramic Coatings)
  • Article
  • Open Access
20 Citations
4,401 Views
12 Pages

Loading Effect of Sol-Gel Derived Barium Hexaferrite on Magnetic Polymer Composites

  • Thanida Charoensuk,
  • Wannisa Thongsamrit,
  • Chesta Ruttanapun,
  • Pongsakorn Jantaratana and
  • Chitnarong Sirisathitkul

24 February 2021

Solution–processing methods were investigated as viable alternatives to produce the polymer-bonded barium hexaferrite (BaM). BaM powders were first synthesized by using the sol-gel auto-combustion method. While the ignition period in two synthesis ba...

(This article belongs to the Special Issue Wet Chemical Synthesis of Functional Nanomaterials)
  • Article
  • Open Access
20 Citations
6,651 Views
17 Pages

Biocompatible Silica-Polyethylene Glycol-Based Composites for Immobilization of Microbial Cells by Sol-Gel Synthesis

  • Daria G. Lavrova,
  • Anton N. Zvonarev,
  • Valery A. Alferov,
  • Tat’yana G. Khonina and ,
  • Elena V. Shadrina,
  • Sergey V. Alferov and
  • Olga N. Ponamoreva
  • + 2 authors+ 0 author

15 January 2023

Biocatalysts based on the methylotrophic yeast Ogataea polymorpha VKM Y-2559 immobilized in polymer-based nanocomposites for the treatment of methanol-containing wastewater were developed. The organosilica composites with different matrix-to-filler r...

(This article belongs to the Special Issue Synthesis and Applications of Polymer-Based Nanocomposites)
  • Article
  • Open Access
2 Citations
955 Views
20 Pages

Epoxy Composites Reinforced with Sol–Gel Synthesized Alumina–Silica, Alumina, and Natural Silica Fillers: Comparative Mechanical Performance

  • Milica Marković,
  • Marija M. Vuksanović,
  • Miloš Petrović,
  • Željko Radovanović and ,
  • Radmila Jančić Heinemann and
  • Vera Obradović
  • + 1 author+ 0 author

8 May 2026

Epoxy resins are widely used thermosetting polymers, but their limited toughness and flexural resilience restrict broader applications. In this study, diglycidyl ether of bisphenol A (DGEBA) epoxy was reinforced with 5 wt.% ceramic fillers of differe...

(This article belongs to the Topic Polymer and Biopolymer Nanocomposites for Emerging Medical, Industrial, and Environmental Applications)
  • Article
  • Open Access
7 Citations
3,104 Views
14 Pages

4 August 2023

Colloidal bonds are realized by sol–gel technology. The binder system of the refractory castable belongs to the Al2O3–SiO2 binary diagram. Mullite is the most thermally stable mineral in this system. This work was motivated by an attempt...

(This article belongs to the Special Issue Advanced Ceramics Composites and Its Applications)
  • Article
  • Open Access
15 Citations
4,830 Views
13 Pages

21 January 2024

Low-temperature co-fired ceramic (LTCC) substrate materials are widely applied in electronic components due to their excellent microwave dielectric properties. However, the absence of LTCC materials with a lower dielectric constant and higher mechani...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Article
  • Open Access
2 Citations
4,592 Views
13 Pages

We have newly developed coaxial and confocal optical-resolution photoacoustic microscopy based on sol-gel composite materials. This transducer contains a concave-shaped piezoelectric layer with a focus depth of 5 mm and a hole with a diameter of 3 mm...

(This article belongs to the Special Issue Ultrasound Imaging in Medicine 2019)
  • Article
  • Open Access
10 Citations
4,543 Views
12 Pages

20 July 2019

In this study, methyltrimethoxysilane (MTMOS), methyltriethoxysilane (MTEOS), tetraethoxysilane (TEOS), and titanium(IV) isopropoxide (TTIP) were used as precursor sols to prepare wood-inorganic composites (WICs) by a sol-gel process, and subsequentl...

(This article belongs to the Special Issue Advances in Wood Composites)
  • Article
  • Open Access
60 Citations
6,693 Views
16 Pages

Controlled Synthesis and Microstructural Properties of Sol-Gel TiO2 Nanoparticles for Photocatalytic Cement Composites

  • Elena Cerro-Prada,
  • Sara García-Salgado,
  • M. Ángeles Quijano and
  • Fernando Varela

25 December 2018

Titania nanoparticles are intensely studied for photodegradation applications. Control of nanoscale morphology and microstructural properties of these materials is critical for photocatalytic performance. Uniform anatase-type TiO2 nanoparticles were...

(This article belongs to the Special Issue Sol-Gel Preparation of Nanomaterials)
  • Article
  • Open Access
9 Citations
3,614 Views
10 Pages

17 February 2020

Novel Fe-based soft magnetic composites (SMCs) with hybrid phosphate-alumina layers were prepared by both sol–gel and ball-milling methods. The effects of the fabrication methods and the addition of Al2O3 particles on the microstructure and the...

  • Article
  • Open Access
29 Citations
3,900 Views
14 Pages

Highly Sensitive and Selective Sol-Gel Spin-Coated Composite TiO2–PANI Thin Films for EGFET-pH Sensor

  • Nur Syahirah Kamarozaman,
  • Nurbaya Zainal,
  • Aimi Bazilah Rosli,
  • Muhammad Alhadi Zulkefle and ,
  • Nik Raikhan Nik Him,
  • Wan Fazlida Hanim Abdullah,
  • Sukreen Hana Herman and
  • Zurita Zulkifli
  • + 3 authors+ 0 author

26 October 2022

A highly selective and sensitive EGFET-pH sensor based on composite TiO2–PANI had been developed in this work. A sol-gel titanium dioxide (TiO2) and the composite of TiO2 with semiconducting polyaniline (PANI) were deposited using a simple spin...

(This article belongs to the Special Issue Women’s Special Issue Series: Gels)
  • Article
  • Open Access
6 Citations
2,984 Views
14 Pages

10 March 2022

The sol-gel process was used to create a new type of polypyrrole-Stannous(II)tungstate nanocomposite by poly(N-methyl pyrrole (PNMPy) sol in Stannous(II)tungstate gel, produced separately using sodium silicotungstic acid and Tn(II)chloride. Tin(II)tu...

  • Feature Paper
  • Article
  • Open Access
49 Citations
9,851 Views
15 Pages

Coating of Titanium Substrates with ZrO2 and ZrO2-SiO2 Composites by Sol-Gel Synthesis for Biomedical Applications: Structural Characterization, Mechanical and Corrosive Behavior

  • Michelina Catauro,
  • Federico Barrino,
  • Massimiliano Bononi,
  • Elena Colombini and ,
  • Roberto Giovanardi,
  • Paolo Veronesi and
  • Elisabetta Tranquillo
  • + 2 authors+ 0 author

19 March 2019

The use of metallic materials as implants presents some major drawbacks, such as their harmful effects on the living organism, especially those induced by corrosion. To overcome this problem, the implant surface of titanium implants can be improved u...

(This article belongs to the Special Issue Thin Films and Coatings by Sol-Gel Chemistry: Synthesis, Characterization and Applications)
  • Article
  • Open Access
4 Citations
3,219 Views
15 Pages

Cobalt Ferrite Particles Produced by Sol-Gel Autocombustion and Embedded in Polysilane: An Innovative Route to Magnetically-Induced Fluorescence Composites

  • Petrisor Samoila,
  • Corneliu Cojocaru,
  • Mihaela Simionescu,
  • Gabriela Sacarescu and ,
  • Gheorghe Roman,
  • Andra-Cristina Enache and
  • Liviu Sacarescu
  • + 2 authors+ 0 author

27 September 2022

Fluorescence detection is currently one of the commonly used techniques worldwide. Through this work, the preparation and optical properties of an interesting composite material are discussed. It is shown that encapsulating cobalt spinel ferrite (CoF...

(This article belongs to the Special Issue Sol-Gel Derived Nanostructured Materials with Innovative Characteristics and Diversified Applications)
  • Article
  • Open Access
23 Citations
4,530 Views
13 Pages

1 August 2023

In this study, we utilized MgO as an insulating buffer layer to enhance the thermal stability and soft magnetic properties of Fe-Ni soft magnetic composites (SMCs) and investigated the effect of high-temperature heat treatment on those soft magnetic...

(This article belongs to the Section Entropic Alloys and Meta-Metals)
  • Article
  • Open Access
13 Citations
6,226 Views
17 Pages

21 January 2020

In this study, coatings of different oxides (TiO2, Al2O3, ZrO2) and hydroxyapatite (HAp) as well as sandwich composite hydroxyapatite with an oxides sublayer (oxide+HAp) were deposited on Ti6Al7Nb alloy using the sol–gel dip-coating method. The...

(This article belongs to the Special Issue Biomaterials Synthesized via Sol–Gel Methods)
  • Article
  • Open Access
29 Citations
5,199 Views
14 Pages

21 April 2023

FeSiCr soft magnetic composites (SMCs) were fabricated by the sol-gel method, and an Al2O3/resin composite layer was employed as the insulation coating. By the decomposition of boehmite (AlOOH) gel into Al2O3 in the temperature range of 606–707...

(This article belongs to the Special Issue Advances in Metal-Containing Magnetic Materials)
  • Article
  • Open Access
15 Citations
5,043 Views
12 Pages

6 April 2018

In this study, methyltrimethoxysilane (MTMOS) was used as a reagent to prepare SiO2-based wood-inorganic composites (WICSiO2) via the sol-gel process, and subsequently, the extended creep behaviors of WICSiO2 with weight percent gains (WPGs) of 10%,...

(This article belongs to the Special Issue Modification of Natural Fibres to Improve Biocomposites Performances)
  • Article
  • Open Access
81 Citations
6,228 Views
12 Pages

23 July 2020

In this paper, a wood-SiO2 composite material was prepared via in-situ polymerization using vacuum/pressure impregnation technology using commercial scale nano silica sol and Chinese Fir (Cunninghamia lanceolate (Lamb.) Hook.). Scanning electron micr...

(This article belongs to the Special Issue Advances in Wood Composites III)
  • Communication
  • Open Access
5 Citations
2,501 Views
8 Pages

Peculiarities of γ-Al2O3 Crystallization on the Surface of h-BN Particles

  • Sergey N. Grigoriev,
  • Elena A. Trusova,
  • Asya M. Afzal,
  • Thet Naing Soe and ,
  • Alexandra Yu. Kurmysheva,
  • Ekaterina Kuznetsova,
  • Anton Smirnov and
  • Nestor Washington Solís Pinargote
  • + 3 authors+ 0 author

15 November 2022

The main goal of the present work was to synthesize a composite consisting of h-BN particles coated with a γ-Al2O3 nanolayer. A method was proposed for applying nanocrystalline γ-Al2O3 to h-BN particles using a sol–gel technique, wh...

(This article belongs to the Special Issue Advanced Ceramics and Composites: Design, Structure, Processing, Properties, and Applications)
  • Article
  • Open Access
17 Citations
3,625 Views
20 Pages

Ceria Particles as Efficient Dopant in the Electrodeposition of Zn-Co-CeO2 Composite Coatings with Enhanced Corrosion Resistance: The Effect of Current Density and Particle Concentration

  • Marija Riđošić,
  • Mihael Bučko,
  • Asier Salicio-Paz,
  • Eva García-Lecina and ,
  • Ljiljana S. Živković and
  • Jelena B. Bajat
  • + 1 author+ 0 author

29 July 2021

Novel Zn-Co-CeO2 protective composite coatings were deposited successfully from chloride plating solutions. Two different types of ceria sources were used and compared: commercial ceria powder and home-made ceria sol. Electrodeposition was performed...

(This article belongs to the Section Macromolecular Chemistry)
  • Article
  • Open Access
30 Citations
8,046 Views
10 Pages

13 March 2019

Polyimide (PI) composite films with thicknesses of approximately 100 µm were prepared via a sol–gel reaction of 3-aminopropyltrimethoxysilane (APTMS) with poly(amic acid) (PAA) composite solutions using a thermal imidization process. PAA...

(This article belongs to the Special Issue Advanced Engineering Plastics)
  • Article
  • Open Access
485 Views
25 Pages

14 June 2026

To address the inherent drawbacks of micro-arc oxidation (MAO), this study employed MAO combined with sol–gel processing to fabricate ZrO2/Al2O3-CeO2 composite coatings on ZrH1.8 surfaces, aiming to solve the hydrogen evolution problem of zirco...

(This article belongs to the Section Composite Coatings)
  • Article
  • Open Access
1 Citations
2,057 Views
10 Pages

Novel Antireflection Coatings Obtained by Low-Temperature Annealing in the Presence of Tetrabutylammonium Bromide and Gold Nanoparticles

  • Alena A. Lokteva,
  • Anastasiia A. Kotelnikova,
  • Roman S. Kovylin,
  • Alexey N. Konev and
  • Alexandr V. Piskunov

31 October 2022

In this work, nanoporous antireflective coatings on silicate glass were obtained from silicon dioxide sol compositions by the sol-gel method in the presence of quaternary ammonium salt (tetrabutylammonium bromide) at different annealing temperatures...

  • Article
  • Open Access
12 Citations
5,334 Views
11 Pages

A Study on the Interfacial Compatibility, Microstructure and Physico-Chemical Properties of Polyimide/Organically Modified Silica Nanocomposite Membrane

  • Md A. Wahab,
  • Mohammad R. Karim,
  • Muhammad O. Aijaz,
  • Bidita Salahuddin and ,
  • Shazed Aziz and
  • Abu A. I. Sina
  • + 1 author+ 0 author

18 April 2021

Polyimide-silica (PI-Silica) composites are of tremendous research interest as high-performance materials because of their excellent thermal and mechanical properties and chemical resistance to organic solvents. Particularly, the sol-gel method of fa...

(This article belongs to the Special Issue Polymer Composites for Structural Applications)
  • Article
  • Open Access
21 Citations
4,993 Views
16 Pages

19 December 2018

A Fe3+-doped SiO2/TiO2 composite film (Fe3+-doped STCF) was prepared on a wood surface via a sol–gel method to improve its photocatalytic activity and hydrophobicity. The structure of the composite film was analyzed by Fourier Transform infrare...

(This article belongs to the Special Issue Self-Cleaning Surfaces)
  • Communication
  • Open Access
9 Citations
2,466 Views
10 Pages

Study of the Possibility of Using Sol–Gel Technology to Obtain Magnetic Nanoparticles Based on Transition Metal Ferrites

  • Nina Shabelskaya,
  • Sergey Sulima,
  • Elena Sulima,
  • Oleg Medennikov and ,
  • Marina Kulikova,
  • Tatyana Kolesnikova and
  • Svetlana Sushkova
  • + 2 authors+ 0 author

14 March 2023

The article presents results for the magnetic nanoparticles sol–gel method synthesis of cobalt (II) ferrite and organic–inorganic composite materials based on it. The obtained materials were characterized using X-ray phase analysis, scann...

(This article belongs to the Special Issue Gels: Synthesis, Characterization and Applications in High Performance Chemistry (2nd Edition))
  • Article
  • Open Access
25 Citations
5,971 Views
14 Pages

Mixed Matrix Poly(Vinyl Alcohol)-Copper Nanofibrous Anti-Microbial Air-Microfilters

  • Elise des Ligneris,
  • Ludovic F. Dumée,
  • Riyadh Al-Attabi,
  • Erwan Castanet and ,
  • Jürg Schütz and
  • Lingxue Kong
  • + 1 author+ 0 author

Membranes decorated with biocide materials have shown great potential for air sanitization but can suffer from biocide agent leaching by dissolution in water. In order to tackle the diffusion of biocide metal ions from the fiber matrix, composite nan...

(This article belongs to the Section Membrane Processing and Engineering)
  • Article
  • Open Access
47 Citations
9,819 Views
18 Pages

Peculiarities of Synthesis and Properties of Lignin–Silica Nanocomposites Prepared by Sol-Gel Method

  • Tetyana M. Budnyak,
  • Selda Aminzadeh,
  • Ievgen V. Pylypchuk,
  • Anastasia V. Riazanova and ,
  • Valentin A. Tertykh,
  • Mikael E. Lindström and
  • Olena Sevastyanova
  • + 2 authors+ 0 author

18 November 2018

The development of advanced hybrid materials based on polymers from biorenewable sources and mineral nanoparticles is currently of high importance. In this paper, we applied softwood kraft lignins for the synthesis of lignin/SiO2 nanostructured compo...

(This article belongs to the Special Issue Synthesis, Characterization, and Applications of Polymer Nanocomposites)
  • Review
  • Open Access
956 Views
42 Pages

Silica Aerogel Composites—Synthesis, Characterization and Applications

  • Sayeed Rushd,
  • Md Arifuzzaman,
  • Mohammod Hafizur Rahman,
  • Md Enamul Hoque and
  • Aminur Rahman

11 September 2026

Silica aerogels are among the most extraordinary porous materials produced through sol–gel chemistry, distinguished by ultralow density, exceptionally high porosity, large specific surface area, and extremely low thermal conductivity. Despite t...

  • Article
  • Open Access
17 Citations
4,364 Views
19 Pages

Hydrogen Production through Glycerol Photoreforming on TiO2/Mesoporous Carbon: Influence of the Synthetic Method

  • Juan Carlos Escamilla,
  • Jesús Hidalgo-Carrillo,
  • Juan Martín-Gómez,
  • Rafael C. Estévez-Toledano and ,
  • Vicente Montes,
  • Daniel Cosano,
  • Francisco J. Urbano and
  • Alberto Marinas
  • + 3 authors+ 0 author

28 August 2020

This article explores the effect of the synthetic method of titanium dioxide (TiO2)/C composites (physical mixture and the water-assisted/unassisted sol-gel method) on their photocatalytic activity for hydrogen production through glycerol photoreform...

(This article belongs to the Special Issue Heterogeneous Catalysts for Energy and Environmental Applications)
  • Article
  • Open Access
12 Citations
1,931 Views
18 Pages

Tailored Thermoresponsive Polyurethane Hydrogels: Structure–Property Relationships for Injectable Biomedical Applications

  • Miriam Di Martino,
  • Lucia Sessa,
  • Federica Romano,
  • Stefano Piotto and
  • Simona Concilio

29 August 2025

Thermoresponsive hydrogels that undergo reversible sol-gel transitions near physiological temperatures are highly attractive for biomedical applications, such as injectable drug delivery and embolization therapies. In this study, a library of polyure...

(This article belongs to the Special Issue Smart and Bio-Medical Polymers: 3rd Edition)
  • Article
  • Open Access
23 Citations
4,292 Views
17 Pages

SiO2 Modification of Silicon Carbide Membrane via an Interfacial In Situ Sol–Gel Process for Improved Filtration Performance

  • Shuangjie Shi,
  • Kejie Jian,
  • Minfeng Fang,
  • Jian Guo and ,
  • Pinhua Rao and
  • Guanghui Li
  • + 1 author+ 0 author

24 August 2023

Silicon carbide (SiC) membrane has emerged as a promising class of inorganic ceramic membranes with many advantageous attributes and has been used for a variety of industrial microfiltration (MF) processes. The state-of-the-art industrial manufacturi...

(This article belongs to the Special Issue Surface Modification and Performance Enhancement for Membranes)
  • Article
  • Open Access
6 Citations
2,696 Views
13 Pages

Electro-Spun P(VDF-HFP)/Silica Composite Gel Electrolytes for High-Performance Lithium-Ion Batteries

  • Wen Huang,
  • Caiyuan Liu,
  • Xin Fang,
  • Hui Peng and ,
  • Yonggang Yang and
  • Yi Li
  • + 1 author+ 0 author

18 October 2024

This work presents a facile way to fabricate a polymer/ceramics composite gel electrolyte to improve the overall properties of lithium-ion batteries. Lithium salt-grafted silica was synthesized and mixed with P(VDF-HFP) to produce a nanofiber film by...

(This article belongs to the Special Issue Advanced Polymers and Composites for Multifunctional Applications)
  • Review
  • Open Access
28 Citations
5,518 Views
23 Pages

Factors Affecting Silica/Cellulose Nanocomposite Prepared via the Sol–Gel Technique: A Review

  • Musawenkosi G. Shange,
  • Nduduzo L. Khumalo,
  • Samson M. Mohomane and
  • Tshwafo E. Motaung

23 April 2024

Cellulose/silica nanocomposites, synthesised through the sol–gel technique, have garnered significant attention for their unique properties and diverse applications. The distinctive characteristics of these nanocomposites are influenced by a ra...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Article
  • Open Access
5 Citations
2,761 Views
11 Pages

Optical Isomerization and Photo-Patternable Properties of GeO2/Ormosils Organic-Inorganic Composite Films Doped with Azobenzene

  • Xuehua Zhang,
  • Qian Wang,
  • Shun Liu,
  • Wei Zhang and ,
  • Fangren Hu and
  • Yongjin Wang
  • + 1 author+ 0 author

GeO2/organically modified silane (ormosils) organic-inorganic composite films containing azobenzene were prepared by combining sol-gel technology and spin coating method. Optical waveguide properties including the refractive index and thickness of th...

(This article belongs to the Section Functional Polymer Coatings and Films)
  • Article
  • Open Access
12 Citations
3,040 Views
11 Pages

Carbon Modification of K1.6Fe1.6Ti6.4O16 Nanoparticles to Optimize the Dielectric Properties of PTFE-Based Composites

  • Alexey Tsyganov,
  • Maria Vikulova,
  • Denis Artyukhov,
  • Alexey Bainyashev and ,
  • Vladimir Goffman,
  • Alexander Gorokhovsky and
  • Nikolay Gorshkov
  • + 2 authors+ 0 author

25 September 2022

In this work, polymer matrix composites with the compositions PTFE/KFTO(H) and PTFE/KFTO(H)@CB and with filler volume fractions of 2.5, 5.0, 7.5, 15, and 30% (without and with carbon modification at a content of 2.5 wt.% regarding ceramic material) w...

(This article belongs to the Special Issue Polymer Matrix Composites for Electronic Components)
  • Article
  • Open Access
6 Citations
2,140 Views
17 Pages

Improving Photocatalytic Hydrogen Production with Sol–Gel Prepared NiTiO₃/TiO₂ Composite

  • Alberto Bacilio Quispe Cohaila,
  • Elisban Juani Sacari Sacari,
  • Wilson Orlando Lanchipa Ramos,
  • Hugo Benito Canahua Loza and ,
  • Rocío María Tamayo Calderón,
  • Jesús Plácido Medina Salas,
  • Francisco Gamarra Gómez,
  • Ramalinga Viswanathan Mangalaraja and
  • Saravanan Rajendran
  • + 4 authors+ 0 author

21 November 2024

This study presents a comprehensive investigation into the synthesis, characterization, and photocatalytic performance of NiTiO3/TiO2 nanocomposites for solar hydrogen production. Through a carefully optimized sol–gel method, we synthesized a h...

(This article belongs to the Special Issue Advanced Materials and Technologies for Hydrogen Evolution)
  • Article
  • Open Access
20 Citations
5,216 Views
19 Pages

Lead-Free BNT–BT0.08/CoFe2O4 Core–Shell Nanostructures with Potential Multifunctional Applications

  • Marin Cernea,
  • Roxana Radu,
  • Harvey Amorín,
  • Simona Gabriela Greculeasa and ,
  • Bogdan Stefan Vasile,
  • Vasile Adrian Surdu,
  • Paul Ganea,
  • Roxana Trusca,
  • Marwa Hattab and
  • Carmen Galassi
  • + 5 authors+ 0 author

Herein we report on novel multiferroic core–shell nanostructures of cobalt ferrite (CoFe2O4)–bismuth, sodium titanate doped with barium titanate (BNT–BT0.08), prepared by a two–step wet chemical procedure, using the sol–...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
9 Citations
3,001 Views
14 Pages

23 November 2023

The TiO2-SiO2-Al2O3 composite coatings were fabricated on the surfaces of Q235 carbon steel via the sol-gel method to improve its corrosion resistance. The effects of the sintering temperature and the layer number on the corrosion performances were e...

  • Article
  • Open Access
24 Citations
7,894 Views
13 Pages

2 June 2017

Abstract: Metal organic framework (MOF) of MIL-101(Cr)-Silica (SiO2) composites with highly mesoporous and uniform dispersions were synthesized by a microwave-assisted hydrothermal method followed by the sol-gel technique. Water vapor adsorption expe...

  • Article
  • Open Access
16 Citations
3,793 Views
26 Pages

Obtaining and Properties of a Photocatalytic Composite Material of the “SiO2–TiO2” System Based on Various Types of Silica Raw Materials

  • Valeria Strokova,
  • Ekaterina Gubareva,
  • Yulia Ogurtsova,
  • Roman Fediuk and ,
  • Piqi Zhao,
  • Nikolai Vatin and
  • Yuriy Vasilev
  • + 2 authors+ 0 author

29 March 2021

Compositions and technology for obtaining a photocatalytic composite material (PCM) by deposition of titanium dioxide particles synthesized by the sol–gel method on a silica support of various types (microsilica, gaize and diatomite) have been develo...

  • Article
  • Open Access
4 Citations
2,247 Views
10 Pages

Preparation and Properties of Ce0.8Sm0.16Y0.03Gd0.01O1.9-BaIn0.3Ti0.7O2.85 Composite Electrolyte

  • Yajun Wang,
  • Changan Tian,
  • Minzheng Zhu,
  • Jie Yang and ,
  • Xiaoling Qu,
  • Cao Chen,
  • Cao Wang and
  • Yang Liu
  • + 3 authors+ 0 author

15 August 2022

Samarium, gadolinium, and yttrium co-doped ceria (Ce0.8Sm0.16Y0.03Gd0.01O1.9, CSYG) and BaIn0.3Ti0.7O2.85 (BIT07) powders were prepared by sol-gel and solid-state reaction methods, respectively. CSYG-BIT07 composite materials were obtained by mechani...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Article
  • Open Access
2 Citations
702 Views
18 Pages

The Influence of Indium Component on the Preparation of a-IGZO Metal-Semiconductor-Metal Ultraviolet Photodetector by Sol–Gel Method

  • Xianrong Liu,
  • Yong Li,
  • Shun Li,
  • Jie Peng and ,
  • Ji Li,
  • Hao Qin,
  • Mingzhe Hu,
  • Tianjun Dai,
  • Yanbin Huang and
  • Zhangyu Zhou
  • + 9 authors+ 4 authors

18 April 2026

In this study, the indium (In) composition in amorphous indium gallium zinc oxide (a-IGZO) thin films was systematically varied from 33% to 84% using a sol–gel process. Subsequently, aluminum/IGZO/aluminum (Al/IGZO/Al) metal–semiconductor...

(This article belongs to the Special Issue Metasurfaces and Low-Dimensional Materials for Photonic and Optoelectronic Applications)

of 27