Skip to Content

125 Results Found

  • Review
  • Open Access
17 Citations
7,248 Views
22 Pages

Research Status and Prospect of Laser Scribing Process and Equipment for Chemical Milling Parts in Aviation and Aerospace

  • Jian Wang,
  • Qiang Liu,
  • Pengpeng Sun,
  • Chenxin Zang and ,
  • Liuquan Wang,
  • Zhiwei Ning,
  • Ming Li and
  • Hui Wang
  • + 3 authors+ 0 author

18 February 2022

Laser scribing in chemical milling is an important process which can effectively improve the precision and efficiency of chemical milling, and is of great significance to improve the thrust–weight ratio and manufacturing efficiency of aviation...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
2,060 Views
13 Pages

11 August 2025

With the increasing complexity and integration density of System-in-Package (SiP) technologies, the demand for selective electromagnetic interference (EMI) shielding is growing. Conventional sputtering processes, while effective for conformal EMI shi...

(This article belongs to the Special Issue Emerging Packaging and Interconnection Technology, Second Edition)
  • Proceeding Paper
  • Open Access
1,296 Views
8 Pages

Optimization of Accuracy and Repeatability in Laser Micro-Processing Using Experimental Design

  • Todor Gavrilov,
  • Todor T. Todorov,
  • Yavor Sofronov,
  • Hristiana Nikolova and
  • Angel Todorov

This study focuses on optimizing the laser micromachining process to achieve precise geometric features. The main objective is to develop a systematic approach for analyzing the process parameters that influence the repeatability of laser material re...

(This article belongs to the Proceedings of The 14th International Scientific Conference TechSys 2025—Engineering, Technologies and Systems)
  • Article
  • Open Access
13 Citations
7,416 Views
8 Pages

Experimental Investigation of Stainless Steel SAE304 Laser Engraving Cutting Conditions

  • Evangelos Nikolidakis,
  • Ioannis Choreftakis and
  • Aristomenis Antoniadis

3 September 2018

Laser machining processes are a new entrant and a rapidly evolving type of non-conventional machining process which allows the machining of complex geometries with high precision, surface quality and productivity in a wide range of materials. Thus, t...

(This article belongs to the Special Issue Precision Machining)
  • Article
  • Open Access
2 Citations
3,721 Views
12 Pages

16 October 2020

The fundamental characteristics of nanoparticle (NP) deposition of the fluoropolymer CYTOP using a femtosecond (fs) laser were investigated. In previous studies, we have demonstrated the microfluidic fabrication of CYTOP, which enables clear microsco...

(This article belongs to the Special Issue Biomimetic Laser Processing Part II)
  • Article
  • Open Access
8 Citations
3,166 Views
20 Pages

A Systematic Study on the Processing Strategy in Femtosecond Laser Scribing via a Two-Temperature Model

  • Rujia Wang,
  • Yufeng Wang,
  • Yong Yang,
  • Shuowen Zhang and ,
  • Yunfeng Liu,
  • Jianhua Yao and
  • Wenwu Zhang
  • + 2 authors+ 0 author

27 October 2023

Balancing quality and productivity, especially deciding on the optimal matching strategy for multiple process parameters, is challenging in ultrashort laser processing. In this paper, an economical and new processing strategy was studied based on the...

  • Article
  • Open Access
6 Citations
3,421 Views
12 Pages

Experimental Study on Surface Polishing of SLM-316L Stainless Steel via Laser Treatment and Mechanical Grinding

  • Wei Fang,
  • Qiuling Wen,
  • Jiaxin Hu,
  • Feng Jiang and ,
  • Zhongwei Hu,
  • Xian Wu,
  • Jinlin Yang and
  • Xiaoguang Wang
  • + 3 authors+ 0 author

The 316L stainless steel material boasts exceptional corrosion resistance and plasticity, among other benefits, and finds extensive application in automotive components, molds, aerospace parts, biomedical equipment, and more. This work focuses on the...

(This article belongs to the Topic Surface Engineering and Micro Additive Manufacturing)
  • Article
  • Open Access
950 Views
18 Pages

Removing Vandalic Graffiti from PVA- and Alkyd-Based Paints by Means of Nd:YAG Laser at 1064 nm

  • Daniel Jiménez-Desmond,
  • Laura Andrés-Herguedas,
  • Pablo Barreiro and
  • José Santiago Pozo-Antonio

26 August 2026

Contemporary mural paintings contribute a significant part of urban cultural heritage, yet their conservation remains challenging due to the complex materials used and the aggressive conditions of the urban environment. Among the main deterioration f...

(This article belongs to the Special Issue Lasers in the Conservation of Artworks)
  • Article
  • Open Access
27 Citations
11,240 Views
16 Pages

8 January 2019

Lithium-Ion Batteries (LIB) are growing in popularity for many applications. Much research has been focusing on battery performance improvement. However, few studies have overcome the disadvantages of the conventional LIB manufacturing processes. Las...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
8 Citations
4,431 Views
14 Pages

On-the-Fly Short-Pulse R2R Laser Patterning Processes for the Manufacturing of Fully Printed Semitransparent Organic Photovoltaics

  • Christos Kapnopoulos,
  • Alexandros Zachariadis,
  • Evangelos Mekeridis,
  • Spyros Kassavetis and ,
  • Christoforos Gravalidis,
  • Argiris Laskarakis and
  • Stergios Logothetidis
  • + 2 authors+ 0 author

18 November 2022

Ultrafast laser patterning is an essential technology for the low-cost and large area production of flexible Organic Electronic (OE) devices, such as Organic Photovoltaics (OPVs). In order to unleash the potential of ultrafast laser processing to per...

(This article belongs to the Special Issue Advances in Laser Processing)
  • Review
  • Open Access
3 Citations
5,327 Views
18 Pages

9 November 2021

This review describes new engineering solutions for Ti:Sapphire lasers obtained at Laseroptek during the development of laser devices for dermatology and aesthetic medicine. The first device, PALLAS, produces 311 nm radiation by the third harmonic ge...

(This article belongs to the Special Issue Ti:Sapphire Lasers and Their Applications)
  • Article
  • Open Access
1 Citations
907 Views
23 Pages

Application of Laser and Cryogenic Surface Treatment for the Evolution of Surface Morphology in Additively Manufactured Ti-6Al-4V Alloy Samples

  • Dorota Laskowska,
  • Monika Szada-Borzyszkowska,
  • Błażej Bałasz,
  • Wiesław Szada-Borzyszkowski and
  • Izabela Bukała

25 November 2025

This study investigates the effects of laser and cryogenic (dry ice) surface treatments on enhancing surface characteristics of Ti-6Al-4V titanium alloy components produced using the Selective Laser Melting (SLM) technique. Components produced via ad...

(This article belongs to the Special Issue Evaluation of the Surface Topography, Abrasive Processing, and Precision Machining Technology and Applications)
  • Article
  • Open Access
5 Citations
2,780 Views
17 Pages

The Surface Modification of Papers Using Laser Processing towards Applications

  • Mariusz Dudek,
  • Elżbieta Sąsiadek-Andrzejczak,
  • Malwina Jaszczak-Kuligowska,
  • Bożena Rokita and
  • Marek Kozicki

14 October 2023

This work presents the results of paper laser processing. It begins with the selection and examination of the processing parameters, then an examination of the properties of the modified papers and examples of applications of the developed modificati...

  • Article
  • Open Access
2,240 Views
12 Pages

Highly Selective Laser Ablation for Thin-Film Electronics: Overcoming Variations Due to Minute Optical Path Length Differences in Plastic Substrates

  • Ahmed Fawzy,
  • Henri Fledderus,
  • Jie Shen,
  • Wiel H. Manders and ,
  • Emile Verstegen and
  • Hylke B. Akkerman
  • + 1 author+ 0 author

Roll-to-roll production of thin organic and large-area electronic (TOLAE) devices often involves a two-step process per functional layer: a continuous, un-pattered deposition of the film and subsequent structuring process, such as laser ablation. Thi...

  • Article
  • Open Access
16 Citations
4,873 Views
12 Pages

Properties of Jet-Plated Ni Coating on Ti Alloy (Ti6Al4V) with Laser Cleaning Pretreatment

  • Xiao Wang,
  • Mingyang Xu,
  • Zhanwen Wang,
  • Lida Shen and ,
  • Mingbo Qiu,
  • Zongjun Tian,
  • Muhammad Naveed Ahsan and
  • Changjiang Wang
  • + 3 authors+ 0 author

20 February 2019

The surface mechanical properties of the Selective Laser Melting (SLM) formed Ti6Al4V samples were improved by adopting a novel laser cleaning pretreatment process combined with a jet electrodeposition process. This paper aimed to investigate the eff...

  • Article
  • Open Access
263 Views
28 Pages

Diamond tools hold a pivotal position in ultra-precision and micro-machining within the high-tech manufacturing sector, owing to their remarkable cutting performance. However, the manufacturing precision of these tools is often affected by their inhe...

  • Review
  • Open Access
42 Citations
17,800 Views
42 Pages

Characterization of Laser Cleaning of Artworks

  • Jan Marczak,
  • Andrzej Koss,
  • Piotr Targowski,
  • Michalina Góra and ,
  • Marek Strzelec,
  • Antoni Sarzyński,
  • Wojciech Skrzeczanowski,
  • Roman Ostrowski and
  • Antoni Rycyk
  • + 4 authors+ 0 author

23 October 2008

The main tasks of conservators of artworks and monuments are the estimation and analysis of damages (present condition), object conservation (cleaning process), and the protection of an object against further degradation. One of the physical methods...

(This article belongs to the Section Chemical Sensors)
  • Article
  • Open Access
680 Views
16 Pages

29 April 2026

The laser-induced lift-off of functional surface layers is a key process in micro- and nano-fabrication; however, optimization criteria for maximizing the lifted-off area remain insufficiently defined. In analogy to the well-established theory of eff...

(This article belongs to the Special Issue New Trends in Laser Processing for Advanced Manufacturing)
  • Article
  • Open Access
202 Views
14 Pages

Process Repeatability in Jig-Assisted UV Nanosecond Laser Ablation of Micro-Wires

  • Mohammad Lotfalian,
  • Graziano Chila and
  • Sivakumar Narayanswamy

This study investigates the process control and improvement in the repeatability of UV nanosecond laser ablation of polyamide-coated platinum micro-wires while preserving post-ablation mechanical integrity. For this purpose, a jig was developed to co...

  • Article
  • Open Access
18 Citations
4,788 Views
13 Pages

1 March 2021

The Laser-based Powder Bed Fusion (L-PBF) process uses a laser beam to selectively melt powder particles deposited in a layer-wise fashion to manufacture components derived from Computer-Aided Design (CAD) information. During laser processing, materi...

  • Article
  • Open Access
17 Citations
5,481 Views
16 Pages

Image Segmentation Approaches for Weld Pool Monitoring during Robotic Arc Welding

  • Zhenzhou Wang,
  • Cunshan Zhang,
  • Zhen Pan,
  • Zihao Wang and ,
  • Lina Liu,
  • Xiaomei Qi,
  • Shuai Mao and
  • Jinfeng Pan
  • + 3 authors+ 0 author

1 December 2018

There is a strong correlation between the geometry of the weld pool surface and the degree of penetration in arc welding. To measure the geometry of the weld pool surface robustly, many structured light laser line based monitoring systems have been p...

(This article belongs to the Special Issue Intelligent Imaging and Analysis)
  • Article
  • Open Access
12 Citations
2,584 Views
25 Pages

11 February 2025

Carbon fiber resin matrix composites (CFRP) are widely recognized for their exceptional properties such as high temperature resistance and high strength, making them indispensable in aerospace, automotive, and medical applications. Despite their grow...

(This article belongs to the Special Issue Advances in Plasma and Laser Engineering (Second Edition))
  • Feature Paper
  • Article
  • Open Access
7 Citations
5,489 Views
11 Pages

Understanding of the Mechanism for Laser Ablation-Assisted Patterning of Graphene/ITO Double Layers: Role of Effective Thermal Energy Transfer

  • Hyung Seok Ryu,
  • Hong-Seok Kim,
  • Daeyoon Kim,
  • Sang Jun Lee and ,
  • Wonjoon Choi,
  • Sang Jik Kwon,
  • Jae-Hee Han and
  • Eou-Sik Cho
  • + 3 authors+ 0 author

29 August 2020

Demand for the fabrication of high-performance, transparent electronic devices with improved electronic and mechanical properties is significantly increasing for various applications. In this context, it is essential to develop highly transparent and...

(This article belongs to the Special Issue Advanced Techniques for Ultrafast Laser Nano/Micro Patterning)
  • Article
  • Open Access
5 Citations
4,645 Views
9 Pages

Repair of Fused Silica Damage Using Selective Femtosecond Laser-Induced Etching

  • Zhenhua Fang,
  • Jing Chen,
  • Xiaolong Jiang,
  • Chuanchao Zhang and ,
  • Lijuan Zhang,
  • Jingxuan Wang,
  • Xiaoyu Luan,
  • Haijun Wang,
  • Qiankun Wu and
  • Wei Liao
  • + 5 authors+ 0 author

13 February 2023

Timely repair of fused silica damage ensures the stable operation of high-power laser systems. In the traditional repair process, the material nearby the damaged area is gradually ablated with CO2 or femtosecond laser. Subsequently, homogenization an...

(This article belongs to the Topic Laser-Induced Damage Properties of Optical Materials)
  • Article
  • Open Access
9 Citations
3,256 Views
11 Pages

23 September 2022

While dismantling nuclear power plants, the reactor vessel internal is cut underwater using mechanical and thermal cutting. In laser thermal cutting, assist gas must be used to remove melted metal; consequently, a large number of radioactive aerosols...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
30 Citations
7,370 Views
12 Pages

6 September 2017

Lithium-ion batteries are widely used for many applications such as portable electronic devices and Electric Vehicles, because they have lighter weight, higher energy density, higher power density, and a higher energy-to-weight ratio than other types...

(This article belongs to the Special Issue Electrode Materials for Lithium-ion Batteries/Super-capacitors)
  • Article
  • Open Access
1 Citations
1,700 Views
19 Pages

Platinum wires, known for their excellent electrical conductivity and durability, are widely used in high-precision industries, such as aerospace and automotive. These wires are typically coated with polyamide for protection; however, specific manufa...

  • Article
  • Open Access
3 Citations
2,672 Views
12 Pages

Evaluation of the Laser Cleaning Efficacy of Q235 Steel Using Laser-Induced Breakdown Spectroscopy

  • Syed Zaheer Ud Din,
  • Chenglin Shi,
  • Qinduan Zhang,
  • Yubin Wei and
  • Wenhao Zhang

25 December 2022

Laser cleaning is a good alternative to ablate and remove contaminants from different samples. To meet the practical demand, we present the elemental analysis of Q235 steel samples, using laser-induced breakdown spectroscopy (LIBS) to enhance the las...

  • Article
  • Open Access
5 Citations
2,107 Views
17 Pages

20 July 2025

The aim was to investigate the impact of laser parameters on the surface morphology of ablated graphene and elucidate the interaction mechanism between carbon materials and femtosecond lasers. A pulsed laser with a wavelength of 1030 nm is employed t...

  • Case Report
  • Open Access
9 Citations
6,719 Views
16 Pages

Combination of Digital and Conventional Workflows in the CAD/CAM-Fabrication of an Implant-Supported Overdenture

  • Michael Benno Schmidt,
  • Angelika Rauch,
  • Marcus Schwarzer,
  • Bernd Lethaus and
  • Sebastian Hahnel

20 August 2020

Completely digital workflows for the fabrication of implant-supported removable restorations are not yet common in clinical dental practice. The aim of the current case report is to illustrate a reliable and comfortable workflow that reasonably merge...

(This article belongs to the Special Issue Dental Implants and Materials)
  • Article
  • Open Access
18 Citations
5,830 Views
12 Pages

High Repetition Rate UV versus VIS Picosecond Laser Fabrication of 3D Microfluidic Channels Embedded in Photosensitive Glass

  • Florin Jipa,
  • Stefana Iosub,
  • Bogdan Calin,
  • Emanuel Axente and ,
  • Felix Sima and
  • Koji Sugioka
  • + 1 author+ 0 author

Glass is an alternative solution to polymer for the fabrication of three-dimensional (3D) microfluidic biochips. Femtosecond (fs) lasers are nowadays the most promising tools for transparent glass processing. Specifically, the multiphoton process ind...

(This article belongs to the Special Issue Laser-Based Nano Fabrication and Nano Lithography)
  • Article
  • Open Access
563 Views
20 Pages

Study on the Polishing Mechanism of Composite Magnetic Field-Controlled Internal Flow Channels in Additive Manufacturing

  • Hao Li,
  • Rui Wang,
  • Jinxu Zhang,
  • Suhuan Guo and ,
  • Guosheng Su,
  • Jin Du,
  • Binxun Li,
  • Peirong Zhang,
  • Yan Xia and
  • Yujing Sun
  • + 5 authors+ 0 author

3 June 2026

Surface defects in additively manufactured internal channels limit their practical applications. Conventional post-processing methods suffer from limited accessibility and a tendency toward over-polishing, whereas magnetic abrasive finishing (MAF) of...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
3 Citations
2,407 Views
13 Pages

9 April 2024

The milling process parameters of laser-clad molded parts have an essential influence on improving the surface quality of the coating. Generally speaking, optimizing a single property often leads to a reduction in another property. In this paper, we...

  • Article
  • Open Access
670 Views
24 Pages

17 July 2026

Silicon carbide (SiC) has high thermal conductivity and thermal stability; however, its high hardness and brittleness make the fabrication of three-dimensional (3D) SiC microstructures—particularly those intended for thermal management of power...

(This article belongs to the Special Issue Laser Micro/Nano-Fabrication, 2nd Edition)
  • Article
  • Open Access
4 Citations
3,452 Views
23 Pages

Interdisciplinary Methods for Zoonotic Tissue Acellularization for Natural Heart Valve Substitute of Biomimetic Materials

  • Roman Major,
  • Magdalena Kopernik,
  • Roman Ostrowski,
  • Piotr Wilczek and ,
  • Amanda Bartkowiak,
  • Karolina Szawiraacz,
  • Grzegorz Lis,
  • Janusz Lekki,
  • Maciej Gawlikowski and
  • Łukasz Major
  • + 5 authors+ 0 author

1 April 2022

The goal of this work was to create a bioactive tissue-based scaffold using multi-disciplinary engineering materials and tissue engineering techniques. Materials & methods: Physical techniques such as direct laser interference lithography and pro...

  • Article
  • Open Access
3 Citations
3,237 Views
12 Pages

Effective Detergency Determination for Single Polymeric Fibers Using Confocal Microscopy

  • Qian Hu,
  • Jindan Wu,
  • Zhiqiang Qin,
  • Xuanxiang Wei and ,
  • Chenchen Jiang,
  • Minghua Wu,
  • Deyou Yu and
  • Jiping Wang
  • + 3 authors+ 0 author

5 August 2023

Detergency determination for single polymeric fibers is of significant importance to screening effective detergents for laundry, but remains challenging. Herein, we demonstrate a novel and effective method to quantify the detergency for single polyme...

(This article belongs to the Special Issue Advanced Analytical Methods for Applied Polymeric Science)
  • Article
  • Open Access
2 Citations
3,341 Views
16 Pages

Development of 17-4 PH Stainless Steel for Low-Power Selective Laser Sintering

  • Yu-Deh Chao,
  • Shu-Cheng Liu,
  • Fu-Lin Chen,
  • Mayur Jiyalal Prajapati and ,
  • Ajeet Kumar,
  • Jung-Ting Tsai and
  • Jeng-Ywan Jeng
  • + 2 authors+ 0 author

19 January 2025

Selective laser sintering (SLS) is one of the prominent methods of polymer additive manufacturing (AM). A low-power laser source is used to directly melt and sinter polymer material into the desired shape. This study focuses on the utilization of the...

(This article belongs to the Special Issue New Insight of Powder Metallurgy: Microstructure, Durability and Mechanical Properties—2nd Edition)
  • Review
  • Open Access
39 Citations
17,697 Views
15 Pages

Laser Cutting Technologies and Corresponding Pollution Control Strategy

  • Yingyong He,
  • Honghu Xie,
  • Yongjun Ge,
  • Yishan Lin and ,
  • Zhitong Yao,
  • Binhui Wang,
  • Meiqing Jin,
  • Jie Liu,
  • Xinyang Chen and
  • Yuhang Sun
  • + 5 authors+ 0 author

11 April 2022

In conjunction with the increasing demand for material cutting, such as the decommissioning and dismantling of nuclear facilities, advanced cutting technologies need be developed to increase precision and cost-effectiveness. As compared with other cu...

(This article belongs to the Special Issue Advances in Solid Waste Treatment and Design)
  • Article
  • Open Access
21 Citations
3,793 Views
17 Pages

Experimental Research on Water Droplet Erosion Resistance Characteristics of Turbine Blade Substrate and Strengthened Layers Materials

  • Juan Di,
  • Shunsen Wang,
  • Xiaojiang Yan,
  • Xihang Jiang and ,
  • Jinyi Lian,
  • Zheyuan Zhang and
  • Yonghui Xie
  • + 2 authors+ 0 author

25 September 2020

In this paper, the water droplet erosion (WDE) performance of typical martensitic precipitation substrate 0Cr17Ni4Cu4Nb in steam turbine final stage, laser solid solution strengthened sample, laser cladding sample and brazed stellite alloy samples ha...

(This article belongs to the Section Corrosion)
  • Article
  • Open Access
2 Citations
894 Views
23 Pages

4 February 2026

Filled-polymer coatings enable functional surfaces for selective metallisation, wetting control and local conductivity, but pulsed-laser texturing is often limited by process non-uniformity caused by scan kinematics and plume shielding. Here, we deve...

(This article belongs to the Special Issue Theory and Applications of Engineering Materials in Advanced Engineering)
  • Article
  • Open Access
5 Citations
3,664 Views
17 Pages

3 March 2021

In this work we present the concept of electroplated conductive elastomers and ablative multi-layer and multi-material laser-assisted manufacturing to enable a largely automated, computer-aided manufacturing process of stretchable electronics and sen...

(This article belongs to the Special Issue nano FIS 2020—Integrated Functional nano Systems)
  • Article
  • Open Access
2 Citations
5,410 Views
16 Pages

Chemical and Laser Cleaning of Corrosion Encrustations on Historical Stained Glass: A Comparative Study

  • Evan Maina Maingi,
  • María P. Alonso,
  • Luis A. Angurel,
  • German F. de la Fuente and ,
  • Stéphan Dubernet,
  • Rémy Chapoulie,
  • Oriane Mellouët and
  • Elodie Vally
  • + 3 authors+ 0 author

14 February 2023

The aim of this research work was to conduct a comparative study on the effectiveness of the application of chemical cleaning versus laser cleaning in the removal of surface congruent dissolution products from a potash-lime–silica historical st...

(This article belongs to the Special Issue Cleaning Strategies for Cultural Heritage)
  • Article
  • Open Access
55 Citations
5,491 Views
25 Pages

Experimental Investigations and Pareto Optimization of Fiber Laser Cutting Process of Ti6Al4V

  • Jay Vora,
  • Rakesh Chaudhari,
  • Chintan Patel,
  • Danil Yurievich Pimenov and ,
  • Vivek K. Patel,
  • Khaled Giasin and
  • Shubham Sharma
  • + 2 authors+ 0 author

15 September 2021

In the current study, laser cutting of Ti6Al4V was accomplished using Taguchi’s L9 orthogonal array (OA). Laser power, cutting speed, and gas pressure were selected as input process parameters, whereas surface roughness (SR), kerf width, dross height...

(This article belongs to the Special Issue Optimization and Analysis of Metal Cutting Processes)
  • Article
  • Open Access
4 Citations
2,424 Views
20 Pages

4 January 2023

Determining an optimal combination of laser process parameters can significantly improve the efficiency and quality of 40Cr13 steel surface processing. In this study, two machine learning models (ELMSS and ELMPS) were proposed to predict the processi...

(This article belongs to the Special Issue Advanced Laser Microfabrication)
  • Abstract
  • Open Access
1,586 Views
1 Page

Conventional machining and shaping processes for polymers and elastomers such as injection molding exhibit significant disadvantages, as specific tools have to be manufactured, the method of machining is highly dependent on the material properties, a...

(This article belongs to the Proceedings of 4th International Conference nanoFIS 2020 - Functional Integrated nanoSystems)
  • Article
  • Open Access
3 Citations
2,686 Views
11 Pages

Selective Laser Melting of Maraging Steel Using Synchronized Three-Spot Scanning Strategies

  • Chung-Wei Cheng,
  • Wei-You Jhang Jian and
  • Bhargav Prasad Reddy Makala

11 April 2021

The selective laser melting (SLM) process, a kind of metal additive manufacturing method, can produce parts with complex geometries that cannot be easily manufactured using material removal processes. With increasing industrial applications, there ar...

  • Article
  • Open Access
26 Citations
4,120 Views
19 Pages

Application of a Robust Decision-Making Rule for Comprehensive Assessment of Laser Cutting Conditions and Performance

  • Miloš Madić,
  • Goran Petrović,
  • Dušan Petković,
  • Jurgita Antucheviciene and
  • Dragan Marinković

18 February 2022

Laser cutting parameters synergistically affect, although in different quantitative and qualitative manners, multiple process performances, such as the resulting cut quality characteristics, material removal rate, cutting time, and costs, and the det...

(This article belongs to the Special Issue Cutting Tools: Materials, Development and Performance)
  • Article
  • Open Access
5 Citations
1,522 Views
18 Pages

Influence of AWJ Process Parameters on Erosion Groove Formation in Additively Manufactured Stainless Steel

  • Radoslav Vandžura,
  • Vladimír Simkulet,
  • František Botko,
  • Matúš Geľatko and
  • Michal Hatala

17 June 2024

The presented manuscript focuses on the influence of process parameters of abrasive water jet technology on the creation of non-transient erosive grooves. The processed stainless steel SS 316L is additively manufactured using the selective laser melt...

  • Article
  • Open Access
9 Citations
3,157 Views
19 Pages

FEM Simulation of AlSi10Mg Artifact for Additive Manufacturing Process Calibration with Industrial-Computed Tomography Validation

  • Cesare Patuelli,
  • Enrico Cestino,
  • Giacomo Frulla,
  • Federico Valente and ,
  • Guido Servetti,
  • Fabio Esposito and
  • Luca Barbero
  • + 2 authors+ 0 author

30 June 2023

Dimensional accuracy of selective laser melting (SLM) parts is one of manufacturers’ major concerns. The additive manufacturing (AM) process is characterized by high-temperature gradients, consolidation, and thermal expansion, which induce resi...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
29 Citations
4,856 Views
19 Pages

Hyperspectral Imagery for Assessing Laser-Induced Thermal State Change in Liver

  • Martina De Landro,
  • Ignacio Espíritu García-Molina,
  • Manuel Barberio,
  • Eric Felli and ,
  • Vincent Agnus,
  • Margherita Pizzicannella,
  • Michele Diana,
  • Emanuele Zappa and
  • Paola Saccomandi
  • + 4 authors+ 0 author

18 January 2021

This work presents the potential of hyperspectral imaging (HSI) to monitor the thermal outcome of laser ablation therapy used for minimally invasive tumor removal. Our main goal is the establishment of indicators of the thermal damage of living tissu...

(This article belongs to the Special Issue Trends and Prospects in Medical Hyperspectral Imagery)

of 3