Skip to Content

58 Results Found

  • Article
  • Open Access
1 Citations
7,177 Views
29 Pages

30 December 2019

A new idea for a contra-rotary ramjet engine is presented. To define the theoretical limits of the non-typical, contra-rotary ramjet engine configuration, its analytical model was developed. The results obtained from that model and the analytical res...

  • Article
  • Open Access
2,118 Views
22 Pages

Design of a Ramjet-Assisted Shell with Front Intake

  • Kishore Manoharan,
  • Yogeshkumar Velari and
  • P. A. Ramakrishna

27 February 2026

Artillery shells are usually large-caliber projectiles fired by artillery guns. Present long-range artillery shells use techniques such as the base bleed system to reduce the drag coefficient of the shell, but could only increase the range of the she...

(This article belongs to the Section Astronautics & Space Science)
  • Article
  • Open Access
20 Citations
7,057 Views
11 Pages

This work analyzes and presents theoretical performance of a marine water-breathing ramjet propulsor. A conceptual scheme of the motor is shown, the equation of thrust is presented, and the dependence on cruise velocity and depth are discussed. Diffe...

(This article belongs to the Special Issue Selected Papers from the Sixth International Symposium on Marine Propulsors)
  • Article
  • Open Access
11 Citations
17,036 Views
22 Pages

25 September 2018

This report assesses the performance characteristics of a ramjet compression system in the application of a hypersonic vehicle. The vehicle is required to be self-powered and perform a complete flight profile using a combination of turbojet, ramjet a...

  • Article
  • Open Access
3 Citations
3,237 Views
14 Pages

23 November 2023

Open-sea testing of a two-phase marine ramjet vehicle has been conducted. This experimental phase was accomplished following comprehensive theoretical research. The concept of two-phase marine ramjet propulsion consists of a submerged propulsor acqui...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
2 Citations
991 Views
24 Pages

30 October 2025

Differing from traditional isobaric combustion, a pulse detonation-based ramjet (PD-Ramjet) was proposed in this study to enhance the efficiency of traditional ramjets. By using a two-dimensional numerical simulation method, the filling process and d...

(This article belongs to the Section Aeronautics)
  • Feature Paper
  • Article
  • Open Access
3 Citations
6,687 Views
15 Pages

14 September 2020

An innovative variant of a multiphase marine ramjet is investigated analytically and experimentally. Pressure liquefied gas (LG) is injected, boiling under superheat conditions in the water stream within the propulsion unit, and serving as an on-boar...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
25 Citations
20,054 Views
24 Pages

6 April 2018

For the past several decades, research dealing with hypersonic flight regimes has been restricted mainly to military applications. Hypersonic transportation could be a possible and affordable solution to travel in the medium term and there is renewed...

(This article belongs to the Special Issue Gas Turbine Engine - towards the Future of Power)
  • Article
  • Open Access
6 Citations
4,090 Views
16 Pages

The Characteristics of Gliding Arc Plasma and Its Activating Effect for Ramjet Combustion

  • Jiulun Sun,
  • Di Jin,
  • Shengfang Huang,
  • Kai Zhang and ,
  • Weiqi Chen and
  • Xinyao Cheng
  • + 1 author+ 0 author

9 June 2022

In order to improve the combustion performance of a ramjet under low temperature and pressure, a gliding arc plasma actuator was designed based on a typical evaporation flameholder. The discharge characteristics, as well as the activating effect of s...

  • Article
  • Open Access
4 Citations
2,084 Views
17 Pages

Combustion Performance and Deposit Characteristics of Boron–Aluminum Composite Fuel in a Powder-Fueled Ramjet: A Ground Test Study

  • Zuodong Liang,
  • Ming Jiang,
  • Ronggang Wei,
  • Hongyan Li and ,
  • Shaoqing Hu,
  • Kai Ma,
  • Guiyang Xu,
  • Wenjie Wang and
  • Yanjing Yang
  • + 4 authors+ 0 author

28 March 2025

Powder-fueled ramjets show great potential due to their unique advantages. How to further improve ramjet performance through methods such as fuel improvement is also an important focus. In this paper, a 14 km, Ma 3.0, ground test of a powder-fueled r...

(This article belongs to the Special Issue Synthesis, Characterization, and Application of Highly Energetic Materials)
  • Article
  • Open Access
3 Citations
2,293 Views
18 Pages

Research on Ablation Device Suitable for Thermal Protection System of Solid Rocket Ramjet

  • Jiming Cheng,
  • Hang Yan,
  • Xiping Feng,
  • Guoqiang Zhu and ,
  • Jie Liu and
  • Xintong Qi
  • + 1 author+ 0 author

27 August 2025

In solid rocket propulsion systems, overload effects induced by aircraft maneuvers can lead to gas accumulation in the afterburning chamber, resulting in severe localized ablation of thermal insulation layers and significantly compromising overall op...

(This article belongs to the Section Astronautics & Space Science)
  • Article
  • Open Access
19 Citations
5,928 Views
11 Pages

This research focuses on theoretically and experimentally evaluating the performance of a metallized hybrid-propellant, water-breathing ramjet. The aluminum and/or magnesium particles added to a polymeric (polyester) fuel grain are hydro-reactive, us...

(This article belongs to the Section Physical Oceanography)
  • Article
  • Open Access
189 Views
24 Pages

15 October 2026

The solid-rocket ramjet is a promising and critical propulsion component for propulsion systems in hypersonic vehicles. However, the gas-flow regulation system of the solid-rocket ramjet exhibits strong nonlinearity, time-varying parameters and abrup...

(This article belongs to the Section Astronautics & Space Science)
  • Article
  • Open Access
14 Citations
8,160 Views
18 Pages

29 December 2022

The performances of a dual-combustion ramjet (DCR) and a scramjet were compared via computational fluid dynamics numerical simulation to provide theoretical guidance for engine selection for a hypersonic vehicle. Kerosene, C12H23, with an equivalence...

  • Article
  • Open Access
443 Views
32 Pages

Efficient particle combustion is crucial for improving the overall performance of solid rocket ramjets. However, particle combustion is jointly constrained by multiple environmental factors, such as oxidizer supply, gas–solid transport, and res...

(This article belongs to the Section Astronautics & Space Science)
  • Article
  • Open Access
8 Citations
4,482 Views
32 Pages

29 June 2019

This paper presents a numerical investigation of ignition and combustion stabilization of a novel design of a solid-fuel ramjet (SFRJ) motor with and without swirl flow. The proposed design includes two solid fuels, retaining the simple design of the...

  • Article
  • Open Access
12 Citations
4,075 Views
29 Pages

10 May 2019

In this paper, the effect of sudden expansion ratio of solid fuel ramjet (SFRJ) combustor is numerically investigated with swirl flow. A computational fluid dynamics (CFD) code is written in FORTRAN to simulate the combustion and flow patterns in the...

  • Article
  • Open Access
1 Citations
1,353 Views
20 Pages

28 October 2025

The ablation resistance of silicone-based thermal protection materials in high-temperature, oxygen-rich environments remains insufficiently understood, yet it is critical for the design of thermal management systems in Solid Fuel Ramjets (SFRJs). To...

(This article belongs to the Section Astronautics & Space Science)
  • Article
  • Open Access
12 Citations
2,603 Views
17 Pages

A Highly Spatiotemporal Resolved Pyrometry for Combustion Temperature Measurement of Single Microparticles Applied in Powder-Fueled Ramjets

  • Zhangtao Wang,
  • Xunjie Lin,
  • Xuefeng Huang,
  • Houye Huang and ,
  • Minqi Zhang,
  • Qinnan Yu,
  • Chao Cui and
  • Shengji Li
  • + 3 authors+ 0 author

30 January 2025

It is vital to measure combustion temperature to define combustion models accurately. For single fuel particles in powder-fueled ramjets, their size distribution ranges from submicron to submillimeter, and their burn time is short to millisecond orde...

(This article belongs to the Special Issue Advances in Nano-Enhanced Thermal Functional Materials)
  • Article
  • Open Access
1,245 Views
17 Pages

Photogrammetry-Based Analysis of Local Regression Rate in Solid Fuel Ramjets

  • Suhan Ko,
  • Hasang Jeon,
  • Sungjune Kim,
  • Iksoo Park and ,
  • Jungpyo Lee and
  • Heejang Moon
  • + 1 author+ 0 author

Solid fuel ramjets (SFRJs) are air-breathing propulsion systems with a high specific impulse, but their sudden expansion combustors often exhibit axially nonuniform fuel regression because of the distinct recirculation, reattachment, and downstream t...

(This article belongs to the Section Astronautics & Space Science)
  • Article
  • Open Access
5 Citations
2,946 Views
12 Pages

High-speed submerged marine vehicles, such as torpedoes, traveling at velocities of an order of 100 m/s and above, require powerful propulsion to overcome the tremendous hydrodynamic drag. This paper aims to investigate a marine hybrid-propellant wat...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
9 Citations
4,129 Views
16 Pages

Analysis and Suppression of Thrust Trap for Turbo-Ramjet Mode Transition with the Integrated Optimal Control Method

  • Feng Guo,
  • Ming Liu,
  • Guozhong He,
  • Junhui Zhou and ,
  • Jianfeng Zhu and
  • Yancheng You
  • + 1 author+ 0 author

An aircraft/engine integrated optimal control method is proposed for turbine-based combined cycle (TBCC) engines based on the Gauss pseudospectral method. The optimal flight trajectory and TBCC control law are obtained for a TBCC-powered aircraft, an...

  • Article
  • Open Access
13 Citations
13,440 Views
32 Pages

14 June 2018

This paper proposes a compression system for a scramjet, to be used as part of a combined cycle engine on a hypersonic transport vehicle that can achieve sustained flight at 8 Mach 8. Initially research into scramjet compression system and shock wave...

  • Article
  • Open Access
1,792 Views
27 Pages

Effect of Solid-to-Gas Ratio on Powder Fuel Mixing in a Cavity-Based Supersonic Combustion Chamber with Induced Shock: A Numerical Study

  • Zuodong Liang,
  • Ming Jiang,
  • Shaoqing Hu,
  • Kai Ma and ,
  • Guiyang Xu,
  • Wenjie Wang,
  • Yuezu Miao and
  • Hongyan Li
  • + 3 authors+ 0 author

19 January 2025

The development of powder-fueled ramjets is challenged by the mechanisms of flow mixing for the combustion of powder fuel in supersonic airflows. This paper describes a series of numerical simulations on the injection process of boron powder fuel in...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
7 Citations
3,384 Views
19 Pages

10 January 2024

The use of film cooling technology is one of the most effective ways to minimize the damage to wall materials caused by the high-temperature environment in a ramjet. Optimization of the design to achieve the highest film cooling efficiency on the hot...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
5 Citations
2,813 Views
17 Pages

Experimental Studies on Thermal Oxidation and Laser Ignition Properties of Al-Mg-Li Powders

  • Yingying Lu,
  • Kai Ma,
  • Changchao Guo,
  • Ming Jiang and ,
  • Chengfeng Wu,
  • Shipeng Li and
  • Shaoqing Hu
  • + 2 authors+ 0 author

28 October 2023

Powder ramjets are a kind of vehicle propulsion system with high specific impulse and efficiency. They provide significant benefits in terms of extended propulsion and thrust adjustment. The pursuit of a highly reactive fuel appropriate for powder ra...

(This article belongs to the Section Metals and Alloys)
  • Technical Note
  • Open Access
8 Citations
10,800 Views
10 Pages

A new ignition system, based on a CH4/O2 torch has been developed by the Chemical Propulsion Laboratory of the University of Brasilia. Designed to ignite a hybrid rocket, this device has been improved to be used in testing of solid and liquid ramjet...

(This article belongs to the Special Issue Advances in Hybrid Rocket Technology and Related Analysis Methodologies)
  • Review
  • Open Access
20 Citations
5,319 Views
12 Pages

Assessing the Sustainability of Liquid Hydrogen for Future Hypersonic Aerospace Flight

  • Abdalrahman Khaled Mohammad,
  • Charles Sumeray,
  • Maximilian Richmond,
  • Justin Hinshelwood and
  • Aritra Ghosh

6 December 2022

This study explored the applications of liquid hydrogen (LH2) in aerospace projects, followed by an investigation into the efficiency of ramjets, scramjets, and turbojets for hypersonic flight and the impact of grey, blue, and green hydrogen as an al...

(This article belongs to the Special Issue Hypersonics: Emerging Research)
  • Article
  • Open Access
16 Citations
4,801 Views
18 Pages

Polyethylene Pyrolysis Products: Their Detonability in Air and Applicability to Solid-Fuel Detonation Ramjets

  • Sergey M. Frolov,
  • Igor O. Shamshin,
  • Maxim V. Kazachenko,
  • Viktor S. Aksenov and ,
  • Igor V. Bilera,
  • Vladislav S. Ivanov and
  • Valerii I. Zvegintsev
  • + 2 authors+ 0 author

4 February 2021

The detonability of polyethylene pyrolysis products (pyrogas) in mixtures with air is determined for the first time in a standard pulsed detonation tube based on the measured values of deflagration-to-detonation transition run-up time. The pyrogas is...

(This article belongs to the Section K: State-of-the-Art Energy Related Technologies)
  • Article
  • Open Access
7 Citations
3,829 Views
20 Pages

Rheology and Stability of Hydrocarbon-Based Gelled Fuels for Airbreathing Applications

  • Simone Dell’Acqua,
  • Francesco Morando,
  • Stefania Carlotti and
  • Filippo Maggi

13 January 2025

Gelled fuels are rheologically complex, non-Newtonian fluids. They combine the benefits of both liquid and solid states, reducing risks of leakage, spilling, and sloshing during storage while maintaining the ability to be sprayed inside a combustion...

(This article belongs to the Special Issue Revolutionizing Aerospace Mobility: Green Hydrogen As the Sustainable Fuel of the Future)
  • Article
  • Open Access
1 Citations
1,564 Views
20 Pages

Quasi-One-Dimensional Reacting-Flow Modeling for Rocket-Based Combined Cycle Engines

  • Jung Jin Park,
  • Sang Gon Lee,
  • Sang Won Lim and
  • Sang Hun Kang

A rapid quasi-one-dimensional (quasi-1D) reacting-flow analysis code was developed for the preliminary assessment of rocket-based combined cycle engines over a broad flight envelope. The internal flow was modeled as steady and quasi-1D in a variable-...

(This article belongs to the Special Issue High Speed Aircraft and Engine Design)
  • Article
  • Open Access
2 Citations
691 Views
34 Pages

The transient mechanism of dual-boundary dynamic opening in the inlet during stage transition of an integral solid rocket ramjet (ISRR) remains insufficiently understood. To address this issue, a combined approach involving numerical simulations and...

(This article belongs to the Special Issue Combustion and Flow in Propulsion Systems)
  • Article
  • Open Access
1,373 Views
21 Pages

25 December 2025

A complex operating environment poses significant challenges to the design of ramjet combustion chambers as high-enthalpy wind tunnels and their associated high-temperature, high-pressure combustion chambers continue to advance. This study developed...

(This article belongs to the Special Issue Research on Performance Improvement of Advanced Alloys (2nd Edition))
  • Article
  • Open Access
1 Citations
1,335 Views
27 Pages

This study investigates the impact of the expansion ratio on combustion oscillation phenomena and their driving mechanisms in a solid-fuel ramjet (SFRJ) through experimental and numerical simulations. By analyzing flow characteristics, combustion osc...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
18 Citations
5,684 Views
22 Pages

Large Eddy Simulation of Combustion for High-Speed Airbreathing Engines

  • Christer Fureby,
  • Guillaume Sahut,
  • Alessandro Ercole and
  • Thommie Nilsson

1 December 2022

Large Eddy Simulation (LES) has rapidly developed into a powerful computational methodology for fluid dynamic studies, between Reynolds-Averaged Navier–Stokes (RANS) and Direct Numerical Simulation (DNS) in both accuracy and cost. High-speed co...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
1 Citations
2,741 Views
18 Pages

Mitigating Forced Shock-Wave Oscillation with Two-Dimensional Wavy Surface

  • Cheng Yao,
  • Yuxue Pu,
  • Zhongming Wang and
  • Yongxin Gao

26 November 2022

Oscillating flow is one challenge for wide-Mach-number-range flight with supersonic/hype-rsonic vehicles. Aiming to mitigate the large-amplitude forced shock-wave oscillation, a 2D wavy surface has been implemented onto the flat-bottomed wall of the...

  • Article
  • Open Access
7 Citations
5,552 Views
25 Pages

Fundamentals of Innovative Aircraft Heat Exchanger Integration for Hydrogen–Electric Propulsion

  • Bernhard Gerl,
  • Matthias Ronovsky-Bodisch,
  • Niccoló Ferrari and
  • Martin Berens

The potential of utilizing the rejected heat of a fuel cell system to improve the aircraft propulsive efficiency is discussed for various flight conditions. The thermodynamic background of the process and the connection of power consumption in the fa...

(This article belongs to the Special Issue 14th EASN International Conference on Innovation in Aviation & Space towards Sustainability Today & Tomorrow)
  • Review
  • Open Access
6 Citations
7,066 Views
34 Pages

10 December 2022

Compression by shock waves is a specific way of compressing gases. It has been practically applied for many years in supersonic flying objects. The idea of using this method in rotary engines is extremely appealing because one disk can replace severa...

  • Article
  • Open Access
2 Citations
2,793 Views
21 Pages

21 December 2022

Experiments were conducted in this study to reveal the flow characteristics of a variable cross-section S-shaped isolator, when applying the steady-state back pressure at the isolator outlet. The self-excited oscillation characteristics of the shock...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
1,040 Views
24 Pages

Multi-Channel Gliding Arc Plasma Cracking of RP-3 Kerosene Spray

  • Shengfang Huang,
  • Yun Wu,
  • Shunhua Yang,
  • Di Jin and
  • Yinghong Li

20 December 2025

To address the issues of narrow ignition limits and low combustion efficiency in ramjet combustors under low-temperature and low-pressure conditions, caused by low reactivity of liquid fuel and slow chemical reaction rates, a multi-channel gliding ar...

(This article belongs to the Section I2: Energy and Combustion Science)
  • Article
  • Open Access
1 Citations
2,490 Views
18 Pages

Experimental Investigation on Flow Characteristics and Ignition Performance of Plasma-Actuated Flame Holder

  • Min Jia,
  • Yinxiang Zang,
  • Wei Cui,
  • Dong Lin and ,
  • Zhibo Zhang and
  • Huimin Song
  • + 1 author+ 0 author

14 September 2022

Improving the performance of flame holders has been a key focus of research on ramjet combustors. The plasma actuator has the potential to improve the ignition performance by manipulating the flow field of the flame holder. In this study, a plasma-ac...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
9 Citations
5,910 Views
26 Pages

Numerical Modeling of Chemical Kinetics, Spray Dynamics, and Turbulent Combustion towards Sustainable Aviation

  • Arvid Åkerblom,
  • Martin Passad,
  • Alessandro Ercole,
  • Niklas Zettervall and ,
  • Elna J. K. Nilsson and
  • Christer Fureby
  • + 1 author+ 0 author

28 December 2023

With growing interest in sustainable civil supersonic and hypersonic aviation, there is a need to model the combustion of alternative, sustainable jet fuels. This work presents numerical simulations of several related phenomena, including laminar fla...

(This article belongs to the Special Issue Sustainable Civil Supersonic and Hypersonic Aircraft: Main Challenges and Latest Developments)
  • Article
  • Open Access
4 Citations
2,738 Views
17 Pages

The energy release process of the Mg-based hydroreactive fuels directly affects the performance of water ramjet engines, and the burning rate is one of the key parameters of the Mg-based hydroreactive fuels. However, there is not enough in-depth unde...

(This article belongs to the Special Issue Combustion of Solid Propellants)
  • Article
  • Open Access
2 Citations
2,872 Views
18 Pages

Thermodynamic Analysis of the Second Fluid Brayton Cycle for Scramjet Engine

  • Jiamao Luo,
  • Xin Qi,
  • Si Jiao,
  • Yunlei Xiao and ,
  • Shengfang Huang and
  • Shunhua Yang
  • + 1 author+ 0 author

28 November 2024

The burning chamber wall of the ramjet engine is facing an extremely thermal environment during normal conditions. Thermal protection measures must be taken on the wall surface of the combustion chamber. At the same time, the aircraft faces high-powe...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
1,278 Views
18 Pages

26 August 2025

The integration of three-dimensional inward-turning inlets with airframes has broad application prospects. This paper develops an integrated design method for the inlet forebody with a controllable incident shock wave shape, aiming at the three-dimen...

(This article belongs to the Special Issue High Speed Aircraft and Engine Design)
  • Article
  • Open Access
1 Citations
968 Views
11 Pages

19 March 2026

To accurately control the hot workability of 7050 aluminum alloy and determine the optimal process window, systematic hot compression experiments were carried out on the Gleeble-3500 thermal simulation test machine under the multi-group process condi...

(This article belongs to the Special Issue Advanced High Entropy Alloy Materials and Films: Properties and Applications)
  • Article
  • Open Access
889 Views
17 Pages

Optimization of Parameters of Block-Shaped Support Tooth Structure Using Orthogonal Experimental Design in Laser Powder Bed Fusion

  • Zhongli Li,
  • Guosheng Fei,
  • Daijian Wu,
  • Xiaoci Chen and ,
  • Yingyan Yu,
  • Zuofa Liu,
  • Jiansheng Zhang and
  • Jie Zhou
  • + 3 authors+ 0 author

8 April 2026

To address the challenges associated with laser powder bed fusion (LPBF) of overhanging structures—namely warping deformation, powder adhesion, and inadequate forming accuracy—this study investigates the optimization of the support–...

(This article belongs to the Special Issue Next-Generation Metal Additive Manufacturing: Intelligent Microstructure Design, Mechanical Reliability, and Advanced Material Systems for Industrial Applications)
  • Article
  • Open Access
4 Citations
2,858 Views
23 Pages

12 January 2023

In order to explore plasma-assisted turbulent mixing in aerospace engines, the dielectric barrier discharge plasma actuation for the turbulent mixing of fuel droplets and oxidant air in a ramjet combustor was studied using computational fluid dynamic...

(This article belongs to the Special Issue Thermal Fluid Dynamics and Control in Aerospace)
  • Article
  • Open Access
4 Citations
2,891 Views
13 Pages

3 November 2022

As hypersonic vehicles are highly integrated, a multifidelity simulation method based on a commercial solver is developed to reduce simulation time for such vehicles and their propulsion systems. This method is characterized by high-level fidelity nu...

(This article belongs to the Special Issue Advances in Hypersonic Aircraft Propulsion Technology)
  • Article
  • Open Access
4 Citations
3,201 Views
20 Pages

18 January 2024

A special feature of airbreathing hypersonic aircraft is the complex coupling between aerodynamic and propulsive performances. This study presents a rapid analysis methodology for the integration of these two critical aspects in the conceptual design...

(This article belongs to the Special Issue Advanced Aircraft Technology)

of 2