Skip to Content

111 Results Found

  • Article
  • Open Access
31 Citations
4,730 Views
19 Pages

Effects of Postprocess Hot Isostatic Pressing Treatments on the Mechanical Performance of EBM Fabricated TI-6Al-2Sn-4Zr-2Mo

  • Miguel Lopez,
  • Christina Pickett,
  • Edel Arrieta,
  • Lawrence E. Murr and ,
  • Ryan B. Wicker,
  • Magnus Ahlfors,
  • Donald Godfrey and
  • Francisco Medina
  • + 3 authors+ 0 author

7 June 2020

An essentially fully acicular alpha-prime martensite within an equiaxed grain structure was produced in an Electron Beam Melting (EBM)-fabricated Ti-6Al-2Sn-4Zr-2Mo (Ti6242) alloy using two different Arcam EBM machines: An A2X system employing tungst...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
17 Citations
5,029 Views
15 Pages

31 May 2023

Inconel 718 is a nickel-based superalloy with excellent creep properties and good tensile and fatigue strength. In the field of additive manufacturing, it is a versatile and widely used alloy due to its good processability in the powder bed fusion wi...

(This article belongs to the Special Issue Design and Post Processing for Metal Additive Manufacturing)
  • Article
  • Open Access
11 Citations
3,622 Views
21 Pages

27 May 2023

Laser-based additive manufacturing is a great manufacturing technology for producing parts of any geometry. To also increase the strength and reliability of parts produced via powder bed fusion with laser beam (PBF-LB), hot isostatic pressing (HIP) i...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
19 Citations
3,162 Views
8 Pages

25 June 2021

The HIP post-processing step is required for developing next generation of advanced powder metallurgy titanium alloys for orthopedic and dental applications. The influence of the hot isostatic pressing (HIP) post-processing step on structural and pha...

(This article belongs to the Special Issue Titanium Alloys and Titanium-Based Matrix Composites)
  • Article
  • Open Access
152 Citations
8,936 Views
17 Pages

Selective Laser Melting of Ti-6Al-4V: The Impact of Post-processing on the Tensile, Fatigue and Biological Properties for Medical Implant Applications

  • Parastoo Jamshidi,
  • Miren Aristizabal,
  • Weihuan Kong,
  • Victor Villapun and ,
  • Sophie C. Cox,
  • Liam M. Grover and
  • Moataz M. Attallah
  • + 2 authors+ 0 author

22 June 2020

One of the main challenges in additive manufacturing (AM) of medical implants for the treatment of bone tissue defects is to optimise the mechanical and biological performance. The use of post-processing can be a necessity to improve the physical pro...

(This article belongs to the Special Issue New Materials and Understandings in Selective Laser Melting (SLM))
  • Article
  • Open Access
110 Citations
7,797 Views
13 Pages

12 June 2018

The selective laser melting (SLM) process was used to fabricate an Alloy718 specimen. The microstructure and creep properties were characterized in both the as-built and post-processed SLM materials. Post-processing involved several heat treatments a...

(This article belongs to the Special Issue Selective Laser Sintering (SLS) of Materials)
  • Article
  • Open Access
31 Citations
6,263 Views
15 Pages

Performance Characterization of Laser Powder Bed Fusion Fabricated Inconel 718 Treated with Experimental Hot Isostatic Processing Cycles

  • Jaime Varela,
  • Jorge Merino,
  • Christina Pickett,
  • Ahmad Abu-Issa and ,
  • Edel Arrieta,
  • Lawrence E. Murr,
  • Ryan B. Wicker,
  • Magnus Ahlfors,
  • Donald Godfrey and
  • Francisco Medina
  • + 5 authors+ 0 author

Inconel 718 alloy fabricated by selective laser melting (SLM) (or laser powder-bed fusion (LPBF)) has been post-process heat-treated by stress-relief anneal at 1065 °C; stress-relief anneal (1065 °C) + solution treatment (at 720 °C) + agi...

  • Review
  • Open Access
76 Citations
10,272 Views
25 Pages

Post-Production Finishing Processes Utilized in 3D Printing Technologies

  • Antreas Kantaros,
  • Theodore Ganetsos,
  • Florian Ion Tiberiu Petrescu,
  • Liviu Marian Ungureanu and
  • Iulian Sorin Munteanu

15 March 2024

Additive manufacturing (AM) has revolutionized production across industries, yet challenges persist in achieving optimal part quality. This paper studies the enhancement of post-processing techniques to elevate the overall quality of AM-produced comp...

(This article belongs to the Special Issue Advanced Processes Creating New Technologies in Tomorrow’s Industry (II))
  • Article
  • Open Access
1 Citations
571 Views
18 Pages

Effects of Low-Temperature Hot Isostatic Pressing on Tensile Properties of 316L, AlSi10Mg and GRCop42 Alloys Produced by PBF-LB

  • Daniele Cortis,
  • Cristina Giancarli,
  • Claudio Testani,
  • Giuseppe Barbieri and
  • Donato Orlandi

9 June 2026

Powder Bed Fusion–Laser Based (PBF-LB) represents the most-used metal Additive Manufacturing technology thanks to its capability of producing high-complexity geometries. The need for industries to define a qualification framework of additive co...

(This article belongs to the Topic Microstructure and Properties in Metals and Alloys, 4th Edition)
  • Article
  • Open Access
20 Citations
5,562 Views
18 Pages

29 May 2021

Mechanical properties of powder bed fusion processed unalloyed copper are reported majorly in the as-fabricated condition, and the effect of post-processes, common to additive manufacturing, is not well documented. In this study, mechanical propertie...

(This article belongs to the Special Issue Additive Manufacturing of Alloys Using Electron Beam Powder Bed Fusion)
  • Article
  • Open Access
38 Citations
5,854 Views
28 Pages

The Low-Cycle Fatigue Behavior, Failure Mechanism and Prediction of SLM Ti-6Al-4V Alloy with Different Heat Treatment Methods

  • Jiangjing Xi,
  • Yun Hu,
  • Hui Xing,
  • Yuanfei Han and ,
  • Haiying Zhang,
  • Jun Jiang and
  • Kamran Nikbin
  • + 2 authors+ 0 author

21 October 2021

Selective laser melting (SLM) is a promising additive manufacturing (AM) process for high-strength or high-manufacturing-cost metals such as Ti-6Al-4V widely applied in aeronautical industry components with high material waste or complex geometry. Ho...

(This article belongs to the Topic Structure and Properties Modification in Additive Manufacturing)
  • Article
  • Open Access
34 Citations
5,196 Views
18 Pages

Designing for Shape Memory in Additive Manufacturing of Cu–Al–Ni Shape Memory Alloy Processed by Laser Powder Bed Fusion

  • Mikel Pérez-Cerrato,
  • Itziar Fraile,
  • José Fernando Gómez-Cortés,
  • Ernesto Urionabarrenetxea and ,
  • Isabel Ruiz-Larrea,
  • Iban González,
  • María Luisa Nó,
  • Nerea Burgos and
  • Jose M. San Juan
  • + 4 authors+ 0 author

9 September 2022

Shape memory alloys (SMAs) are functional materials that are being applied in practically all industries, from aerospace to biomedical sectors, and at present the scientific and technologic communities are looking to gain the advantages offered by th...

(This article belongs to the Special Issue Design, Characterization and Novel Applications of Shape Memory Alloys)
  • Feature Paper
  • Article
  • Open Access
74 Citations
8,234 Views
13 Pages

Microstructural Evolution of Post-Processed Hastelloy X Alloy Fabricated by Laser Powder Bed Fusion

  • Giulio Marchese,
  • Emilio Bassini,
  • Alberta Aversa,
  • Mariangela Lombardi and ,
  • Daniele Ugues,
  • Paolo Fino and
  • Sara Biamino
  • + 2 authors+ 0 author

5 February 2019

Hastelloy X (HX) is a Ni-based superalloy which is employed to produce gas turbine and gas-cooled reactor sectors due to its outstanding oxidation resistance and high tensile strength at high temperatures. This alloy can be processed by laser powder...

(This article belongs to the Special Issue High Temperature Alloys and Intermetallic Materials)
  • Article
  • Open Access
10 Citations
4,838 Views
21 Pages

Effect of Post-Processing Treatment on Fatigue Performance of Ti6Al4V Alloy Manufactured by Laser Powder Bed Fusion

  • Ane Miren Mancisidor,
  • María Belén García-Blanco,
  • Iban Quintana,
  • Pedro José Arrazola and ,
  • Elixabete Espinosa,
  • Mikel Cuesta,
  • Joseba Albizuri and
  • Fermin Garciandia
  • + 3 authors+ 0 author

Fatigue properties of parts are of particular concern for safety-critical structures. It is well-known that discontinuities in shape or non-uniformities in materials are frequently a potential nucleus of fatigue failure. This is especially crucial fo...

  • Article
  • Open Access
1 Citations
1,434 Views
24 Pages

Effect of Post-Printing Methods on the Microstructure and Mechanical Properties of Ti6Al4V Titanium Alloy Samples Fabricated Using Laser Powder Bed Fusion

  • Krzysztof Żaba,
  • Stanislav Rusz,
  • Alicja Haslik-Sopata,
  • Łukasz Kuczek and ,
  • Ilona Różycka,
  • Maciej Balcerzak and
  • Tomasz Trzepieciński
  • + 2 authors+ 0 author

19 January 2026

Laser powder bead fusion (LPBF) allows for the fabrication of highly accurate components from metal powders, which is difficult to achieve using traditional methods. LPBF-produced components can be characterized by their porosity and unfavorable micr...

(This article belongs to the Special Issue Welding, Joining, and Additive Manufacturing of Metals and Alloys (Third Edition))
  • Article
  • Open Access
241 Citations
24,573 Views
23 Pages

Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments

  • Ahmad Mostafa,
  • Ignacio Picazo Rubio,
  • Vladimir Brailovski,
  • Mohammad Jahazi and
  • Mamoun Medraj

30 May 2017

3D printing results in anisotropy in the microstructure and mechanical properties. The focus of this study is to investigate the structure, texture and phase evolution of the as-printed and heat treated IN718 superalloy. Cylindrical specimens, printe...

  • Article
  • Open Access
11 Citations
4,612 Views
15 Pages

The Effect of Hot Isostatic Pressing on Surface Integrity, Microstructure and Strength of Hybrid Metal Injection Moulding, and Laser-Based Powder Bed Fusion Stainless-Steel Components

  • Aldi Mehmeti,
  • Donal Lynch,
  • Pavel Penchev,
  • Rafael Martinez Ramos and ,
  • Denis Vincent,
  • Johannes Maurath,
  • David Ian Wimpenny,
  • Khamis Essa and
  • Stefan Dimov
  • + 4 authors+ 0 author

15 August 2021

Hybrid manufacture of components by combining capabilities of replication and additive manufacturing processes offer a flexible and sustainable route for producing cost-effectively small batches of metal parts. At present, there are open issues relat...

(This article belongs to the Topic Additive Manufacturing)
  • Article
  • Open Access
502 Views
13 Pages

4 September 2026

Laser powder bed fusion (LPBF) enables fabrication of complex bimetallic structures, such as combustion chambers, that require a thermally conductive internal liner supported by a high-strength structural jacket. Inconel 625 (IN625) served as the sub...

  • Review
  • Open Access
31 Citations
10,752 Views
45 Pages

18 February 2025

Cooling Rate (CR) definitively influences the microstructure of metallic parts manufactured through various processes. Factors including cooling medium, surface area, thermal conductivity, and temperature control can influence both predicted and unfo...

(This article belongs to the Special Issue Innovations in the Design, Simulation, and Manufacturing of Production Systems)
  • Article
  • Open Access
490 Views
14 Pages

Effect of Solution Treatment on Microstructure and Corrosion Resistance Performance of HIPed Net-Shaped Duplex Stainless Steel SAF2507

  • Bingwei Wang,
  • Jiahao Liu,
  • Zhanfang Wu,
  • Pengjie Zhang and ,
  • Lida Che and
  • Dianchun Ju
  • + 1 author+ 0 author

10 June 2026

This study systematically investigates the effect of solution treatment on the microstructure and corrosion resistance of duplex stainless steel SAF2507 fabricated by direct hot isostatic pressing (HIP). The HIP specimens were solution treated at 108...

  • Article
  • Open Access
52 Citations
5,610 Views
17 Pages

Tailoring Microstructure and Mechanical Properties of Additively-Manufactured Ti6Al4V Using Post Processing

  • Yaron Itay Ganor,
  • Eitan Tiferet,
  • Sven C. Vogel,
  • Donald W. Brown and ,
  • Michael Chonin,
  • Asaf Pesach,
  • Amir Hajaj,
  • Andrey Garkun,
  • Shmuel Samuha and
  • Ori Yeheskel
  • + 6 authors+ 1 author

31 January 2021

Additively-manufactured Ti-6Al-4V (Ti64) exhibits high strength but in some cases inferior elongation to those of conventionally manufactured materials. Post-processing of additively manufactured Ti64 components is investigated to modify the mechanic...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
3 Citations
2,367 Views
14 Pages

11 November 2024

Crack-free Stellite-6 alloy was fabricated using the laser powder bed fusion technique equipped with a heating module as the first attempt. Single tracks were printed with a build plate heated to 400 °C to identify the processing window. Based on...

  • Article
  • Open Access
49 Citations
7,185 Views
16 Pages

Comparison of Three 3D Segmentation Software Tools for Hip Surgical Planning

  • Marco Mandolini,
  • Agnese Brunzini,
  • Giulia Facco,
  • Alida Mazzoli and ,
  • Archimede Forcellese and
  • Antonio Gigante
  • + 1 author+ 0 author

13 July 2022

In hip arthroplasty, preoperative planning is fundamental to reaching a successful surgery. Nowadays, several software tools for computed tomography (CT) image processing are available. However, research studies comparing segmentation tools for hip s...

(This article belongs to the Special Issue 3D Sensing and Imaging for Biomedical Investigations)
  • Proceeding Paper
  • Open Access
780 Views
24 Pages

Additive manufacturing (AM) of metallic lattice structures, particularly those made of Ti-6Al-4V, has significant potential for biomedical applications due to their lightweight nature and favorable mechanical properties. However, laser powder bed fus...

(This article belongs to the Proceedings of The 4th International Conference on Applied Research and Engineering)
  • Article
  • Open Access
18 Citations
7,051 Views
14 Pages

body2vec: 3D Point Cloud Reconstruction for Precise Anthropometry with Handheld Devices

  • Magda Alexandra Trujillo-Jiménez,
  • Pablo Navarro,
  • Bruno Pazos,
  • Leonardo Morales and ,
  • Virginia Ramallo,
  • Carolina Paschetta,
  • Soledad De Azevedo,
  • Anahí Ruderman,
  • Orlando Pérez and
  • Rolando Gonzalez-José
  • + 6 authors+ 1 author

11 September 2020

Current point cloud extraction methods based on photogrammetry generate large amounts of spurious detections that hamper useful 3D mesh reconstructions or, even worse, the possibility of adequate measurements. Moreover, noise removal methods for poin...

(This article belongs to the Section Image and Video Processing)
  • Article
  • Open Access
1,063 Views
25 Pages

Experimental Investigation of Material Characteristics That Can Affect Fatigue Behavior of Ti6Al4V Alloys Produced by Additive Manufacturing SLM and EBM Processes

  • Francesco Sordetti,
  • Niki Picco,
  • Marco Pelegatti,
  • Riccardo Toninato and ,
  • Marco Petruzzi,
  • Federico Milan,
  • Emanuele Avoledo,
  • Alessandro Tognan,
  • Elia Marin and
  • Alex Lanzutti
  • + 9 authors+ 4 authors

22 April 2026

Ti alloys are widely used in aerospace and biomedical fields due to their high mechanical properties under severe loading. Interest in additively manufactured Ti6Al4V has increased, but further research is needed to fully characterize their propertie...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Metallic Materials Under Heat Treatment)
  • Feature Paper
  • Review
  • Open Access
4 Citations
2,633 Views
23 Pages

Advances in 3D Printing: Microfabrication Techniques and Forming Applications

  • Di Pan,
  • Fanghui Jia,
  • Muyuan Zhou,
  • Hao Liu and ,
  • Jingru Yan,
  • Lisong Zhu,
  • Ming Yang and
  • Zhengyi Jiang
  • + 3 authors+ 0 author

15 August 2025

Stainless steel is essential in high-performance industries due to its strength, corrosion resistance, and biocompatibility. However, conventional manufacturing methods limit material efficiency, design complexity, and customization. Additive manufac...

(This article belongs to the Special Issue Innovations in 3D Printing Technologies: From Microfabrication to Functional Applications)
  • Review
  • Open Access
49 Citations
6,425 Views
56 Pages

17 June 2025

The rapid progress in additive manufacturing (AM) has unlocked significant possibilities for producing 316/316L stainless steel components, particularly in industries requiring high precision, enhanced mechanical properties, and intricate geometries....

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
39 Citations
6,475 Views
22 Pages

Comparative Analysis of Mechanical Properties: Conventional vs. Additive Manufacturing for Stainless Steel 316L

  • Constantin Alex Sumanariu,
  • Cătălin Gheorghe Amza,
  • Florin Baciu,
  • Mihai Ion Vasile and
  • Adrian Ionut Nicoara

29 September 2024

This research investigates the tensile strength and microstructural properties of stainless steel 316L, comparing samples fabricated using additive manufacturing (AM) to those produced via conventional manufacturing techniques such as forging and cas...

(This article belongs to the Special Issue Additive Manufacturing and Nondestructive Testing of Metals)
  • Article
  • Open Access
10 Citations
3,019 Views
21 Pages

TiAl Alloy Fabricated Using Election Beam Selective Melting: Process, Microstructure, and Tensile Performance

  • Yu Zhang,
  • Yan Li,
  • Meihui Song,
  • Yanchun Li and ,
  • Shulin Gong and
  • Bin Zhang
  • + 1 author+ 0 author

20 April 2024

TiAl alloy is one of the most attractive candidates for a new generation of high-temperature structural materials and has broad application prospects in the aerospace field. As a typical intermetallic material, TiAl is inevitably difficult to process...

(This article belongs to the Special Issue Advances in 3D Printing Technologies of Metals—2nd Edition)
  • Feature Paper
  • Article
  • Open Access
25 Citations
8,667 Views
23 Pages

The microstructure, static, and fatigue mechanical properties of laser powder bed fused (LPBF) Ti-6Al-4V components subjected to three different post-processing treatments (PTs) are compared. The first treatment includes stress relief (SR) and beta-p...

(This article belongs to the Special Issue Metal Additive Manufacturing and Its Post Processing Techniques)
  • Article
  • Open Access
19 Citations
4,190 Views
28 Pages

18 July 2023

Postprocessing is essential for improving titanium aluminide (TiAl) microstructure and part quality after using the laser powder bed fusion (L-PBF) method. It has been reported that Ti-48Al-2Cr-2Nb (%at) processed by L-PBF has internal defects and lo...

(This article belongs to the Section Metals and Alloys)
  • Review
  • Open Access
11 Citations
3,293 Views
40 Pages

Crystallographic Texture and Phase Transformation in Titanium Alloys Fabricated via Powder Bed Fusion Processes: A Comprehensive Review

  • Rajesh Kannan Arasappan,
  • Hafiz Muhammad Rehan Tariq,
  • Ha-Seong Baek,
  • Minki Kim and
  • Tea-Sung Jun

26 December 2025

Additive manufacturing (AM) of titanium alloys enables the production of complex, high-performance components, but the steep thermal gradients and rapid solidification involved make it challenging to control crystallographic texture and phase evoluti...

(This article belongs to the Section Crystallography and Applications of Metallic Materials)
  • Article
  • Open Access
39 Citations
7,367 Views
18 Pages

Comprehensive and Comparative Heat Treatment of Additively Manufactured Inconel 625 Alloy and Corresponding Microstructures and Mechanical Properties

  • Victoria Luna,
  • Leslie Trujillo,
  • Ariel Gamon,
  • Edel Arrieta and ,
  • Lawrence E. Murr,
  • Ryan B. Wicker,
  • Colton Katsarelis,
  • Paul R. Gradl and
  • Francisco Medina
  • + 4 authors+ 0 author

This study examines and compares the microstructures, Vickers microindentation hardness, and mechanical properties for additively manufactured (AM) samples built by a variety of AM processes: wire arc AM (WAAM), electron beam powder bed fusion (EB-PB...

(This article belongs to the Special Issue Metal Additive Manufacturing and Its Post Processing Techniques)
  • Article
  • Open Access
17 Citations
6,553 Views
19 Pages

Design Optimization of Hot Isostatic Pressing Capsules

  • Samaneh Sobhani,
  • Marc Albert,
  • David Gandy,
  • Ali Tabei and
  • Zhaoyan Fan

Power metallurgy hot isostatic pressing (PM-HIP) is a manufacturing technique capable of producing net shape or near-net shape components with complicated geometries from materials that are difficult to melt and cast, mechanically deform or weld. How...

(This article belongs to the Topic Numerical and Experimental Advances in Innovative Manufacturing Processes)
  • Article
  • Open Access
72 Citations
12,288 Views
21 Pages

25 December 2018

Alloy 718 finds application in gas turbine engine components, such as turbine disks, compressor blades and so forth, due to its excellent mechanical and corrosion properties at elevated temperatures. Electron beam melting (EBM) is a recent addition t...

(This article belongs to the Special Issue Progress in Metals Additive Manufacturing: From New Design to New Materials and Post Processing)
  • Article
  • Open Access
6 Citations
5,148 Views
32 Pages

16 August 2021

The effect of friction on nonlinear dynamics and vibration of total knee arthroplasties is yet to be investigated and understood. This research work aims at studying the influence of friction on nonlinear dynamics, friction-induced vibration, and dam...

(This article belongs to the Special Issue Friction and Impact-Induced Vibration)
  • Article
  • Open Access
9 Citations
4,412 Views
21 Pages

Development of a Methodology for Low-Cost 3D Underwater Motion Capture: Application to the Biomechanics of Horse Swimming

  • Chloé Giraudet,
  • Claire Moiroud,
  • Audrey Beaumont,
  • Pauline Gaulmin and ,
  • Chloé Hatrisse,
  • Emeline Azevedo,
  • Jean-Marie Denoix,
  • Khalil Ben Mansour,
  • Pauline Martin and
  • Frédéric Marin
  • + 7 authors+ 2 authors

30 October 2023

Hydrotherapy has been utilized in horse rehabilitation programs for over four decades. However, a comprehensive description of the swimming cycle of horses is still lacking. One of the challenges in studying this motion is 3D underwater motion captur...

(This article belongs to the Special Issue Sensors and Wearable Technologies in Sport Biomechanics)
  • Article
  • Open Access
42 Citations
6,918 Views
12 Pages

Hot Isostatic Pressing for Fatigue Critical Additively Manufactured Ti-6Al-4V

  • Terrence P. Moran,
  • Patricio E. Carrion,
  • Seungjong Lee,
  • Nima Shamsaei and ,
  • Nam Phan and
  • Derek H. Warner
  • + 1 author+ 0 author

10 March 2022

The efficacy of hot isostatic pressing (HIP) for enhancing fatigue performance is investigated for additively manufactured (AM) Ti-6Al-4V. The limitations of HIP are probed by varying the initial material state via the selection of AM system, powder...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
5 Citations
3,246 Views
10 Pages

A hip fracture is a major adverse event for older individuals that has extremely high rates of mortality and morbidity, specifically functional decline. Thus, effective post–hip fracture rehabilitation is crucial to enable patients to regain fu...

(This article belongs to the Section Health-Related Quality of Life and Well-Being)
  • Article
  • Open Access
11 Citations
6,237 Views
16 Pages

Introduction: With an increasingly ageing population, there is a growing impact of fragility hip fracture on the healthcare system and on society as a whole. Oral and injectable analgesics are often insufficient whilst traction and regional blocks do...

(This article belongs to the Special Issue All-Time Paradigm Shift of Anesthesia Management and Pain Medicine)
  • Article
  • Open Access
228 Views
32 Pages

For robotic ultrasound targeting developmental dysplasia of the hip (DDH), reconstructed infant body-surface meshes should preserve the target surface while excluding bed, support, and background geometry. This study proposes a structured vision&ndas...

(This article belongs to the Special Issue Ultrasound-Guided Platform for Biomedical Applications)
  • Article
  • Open Access
11 Citations
5,143 Views
17 Pages

Microstructure Refinement of Bulk Inconel 718 Parts During Fabrication with EB-PBF Using Scanning Strategies: Transition from Bidirectional-Raster to Stochastic Point-Based Melting

  • Shadman Tahsin Nabil,
  • Cristian Banuelos,
  • Michael E. Madigan,
  • Sammy Tin and ,
  • Jacob I. Rodriguez,
  • Lawrence E. Murr,
  • Ryan B. Wicker and
  • Francisco Medina
  • + 3 authors+ 0 author

Inconel 718 is a widely popular aerospace superalloy known for its high-temperature performance and resistance to oxidation, creep, and corrosion. Traditional manufacturing methods, like casting and powder metallurgy, face challenges with intricate s...

(This article belongs to the Special Issue High-Performance Metal Additive Manufacturing)
  • Article
  • Open Access
19 Citations
5,761 Views
15 Pages

Mechanical and Fatigue Properties of Ti-6Al-4V Alloy Fabricated Using Binder Jetting Process and Subjected to Hot Isostatic Pressing

  • Jesús Manuel Alegre,
  • Andrés Díaz,
  • Ruben García,
  • Luis Borja Peral and ,
  • Miriam Lorenzo-Bañuelos and
  • Isidoro Iván Cuesta
  • + 1 author+ 0 author

2 August 2024

Binder jetting 3D printing is an additive manufacturing technique based on the creation of a part through the selective bonding of powder with an adhesive, followed by a sintering process at high temperature to densify the material and produce parts...

(This article belongs to the Special Issue Additive Manufacturing and Microstructure Characteristics of Metallic Material)
  • Review
  • Open Access
16 Citations
4,548 Views
45 Pages

Processing and Development of Porous Titanium for Biomedical Applications: A Comprehensive Review

  • Mayank Kumar Yadav,
  • Akshay Yarlapati,
  • Yarlapati Naga Aditya,
  • Praveenkumar Kesavan and ,
  • Vaibhav Pandey,
  • Chandra Shekhar Perugu,
  • Amit Nain,
  • Kaushik Chatterjee,
  • Satyam Suwas and
  • Konda Gokuldoss Prashanth
  • + 6 authors+ 1 author

Titanium (Ti) and its alloys are widely used in orthopedic applications, including total hip and knee replacements, bone plates, and dental implants, because of their superior biocompatibility, bioactivity, corrosion resistance, and mechanical robust...

  • Article
  • Open Access
1 Citations
1,903 Views
16 Pages

24 February 2025

The low productivity and high cost of additive manufacturing techniques, such as powder bed fusion (PBF), limits its wide application in industry. A combined approach of hot isostatic pressing (HIP) and PBF was an effective means to solve this limita...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
325 Views
16 Pages

Influence of Directed Energy Deposition Build Orientation on the Final Mechanical Properties of Large Ti-6Al-4V Components

  • Luca Marsilio,
  • Lorenzo Pollicini,
  • Federico Mazzucato,
  • Mohammad Taghian and ,
  • Abdollah Saboori and
  • Anna Valente
  • + 1 author+ 0 author

28 September 2026

Directed Energy Deposition (DED) is an additive manufacturing technology rapidly consolidating for the fabrication and repair of complex aerospace Ti-6Al-4V components, ensuring high deposition rates and large build volumes. However, in high build-ra...

(This article belongs to the Special Issue Additive Manufacturing of Metals and Alloys: Microstructure and Mechanical Properties—Second Edition)
  • Article
  • Open Access
68 Citations
9,437 Views
9 Pages

Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

  • Wolfgang Schneller,
  • Martin Leitner,
  • Sebastian Springer,
  • Florian Grün and
  • Michael Taschauer

This study shows the effect of hot isostatic pressing (HIP) on the porosity and the microstructure, as well as the corresponding fatigue strength of selectively-laser-melted (SLM) AlSi10Mg structures. To eliminate the influence of the as-built surfac...

(This article belongs to the Special Issue Selective Laser Melting: Materials and Applications)
  • Article
  • Open Access
7 Citations
2,135 Views
16 Pages

Comparison of the Microstructural, Mechanical and Corrosion Resistance Properties of Ti6Al4V Samples Manufactured by LENS and Subjected to Various Heat Treatments

  • Anna Antolak-Dudka,
  • Tomasz Czujko,
  • Tomasz Durejko,
  • Wojciech J. Stępniowski and ,
  • Michał Ziętala and
  • Justyna Łukasiewicz
  • + 1 author+ 0 author

1 March 2024

In this paper, the influences of two post-heat treatments on the structural, mechanical and corrosion resistance properties of additively manufactured Ti6Al4V alloys were discussed in detail. The materials were produced using the laser engineering ne...

(This article belongs to the Special Issue Mechanical Performance and Microstructural Characterization of Light Alloys (2nd Edition))
  • Article
  • Open Access
3 Citations
4,374 Views
18 Pages

The paper is the result of research intended to develop a process route for the manufacturing of powder metallurgical (PM) gears for application in transmissions units for heavy duty powertrain applications. The main problem of PM for such applicatio...

of 3