The continuous growth of energy-efficient electronic devices and compact systems has motivated researchers to develop TFTs based on p-type semiconductors. This review examines the developments in p-type thin-film transistors (TFTs) processed using so...
This review focuses on the synthesis of p-type metal-oxide (p-type MOX) semiconductor thin films, such as CuO, NiO, Co3O4, and Cr2O3, used for chemical-sensing applications. P-type MOX thin films exhibit several advantages over n-type MOX, including...
This review reports the properties of p-type semiconductors with nanostructured features employed as photocathodes in photoelectrochemical cells (PECs). Light absorption is crucial for the activation of the reduction processes occurring at the p-type...
P-type ZnO transparent semiconductor thin films were prepared on glass substrates by the sol-gel spin-coating process with N doping and Ga–N co-doping. Comparative studies of the microstructural features, optical properties, and electrical char...
A series of quinoidal oligothiophenes terminated with carbonyl groups (nTDs, n = 2–4) are studied as p-type organic semiconductors for the active materials in organic field-effect transistors (OFETs) both by the theoretical and experimental app...
Considering the increasing global demand for energy and the harmful ecological impact of conventional energy sources, it is obvious that development of clean and renewable energy is a necessity. Since the Sun is our only external energy source, harne...
Two-dimensional materials have wide ranging applications in electronic devices and catalysts owing to their unique properties. Boron-based compounds, which exhibit a polymorphic nature, are an attractive choice for developing boron-based two-dimensio...
A p-type Cu3Ta7O19 semiconductor was synthesized using a CuCl flux-based approach and investigated for its crystalline structure and photoelectrochemical properties. The semiconductor was found to be metastable, i.e., thermodynamically unstable, and...
While p-type transparent conducting materials (TCMs) are crucial for many optoelectronic applications, their performance is still not satisfactory. This has impeded the development of many devices such as photovoltaics, sensors, and transparent elect...
With the ongoing development of electronic devices, there is an increasing demand for new semiconductors beyond traditional silicon. A key element in electronic circuits, complementary metal-oxide semiconductor (CMOS), utilizes both n-type and p-type...
Photocatalytic technology holds significant promise for sustainable development and environmental protection due to its ability to utilize renewable energy sources and degrade pollutants efficiently. In this study, BiOI nanosheets (NSs) were synthesi...
In this work, we show the performance improvement of p-type thin-film transistors (TFTs) with Ge
A new benzotrithiophene-based small molecule, namely 2,5,8-Tris[5-(2,2-dicyanovinyl)-2-thienyl]-benzo[1,2-b:3,4-b′:6,5-b″]-trithiophene (DCVT-BTT), was successfully synthesized and subsequently characterized. This compound was found to pr...
In the present contribution, three methods for the preparation of nanoscaledSrTi1-xFexO3-δ sensor films for hydrocarbon sensing were investigated. Besides screen-printed thick films based on sol-precipitated nanopowders, two novel synthesis methods,e...
Gallium arsenide photoconductive semiconductor switches (GaAs PCSSs) have attracted much attention in pulsed power systems and high-power microwave sources. The quality of ohmic contact has a significant impact on their switching performance. In this...
Nowadays, metal oxide semiconductors (MOS)-reduced graphene oxide (rGO) nanocomposites have attracted significant research attention for gas sensing applications. Herein, a novel composite material is synthesized by combining two p-type semiconductor...
In the present study, the effects of nitrogen incorporation on the transition of a p-type copper oxide semiconductor are investigated. The properties of sputtered copper oxide and nitrogen-incorporated copper oxide are evaluated and compared at vario...
Gas sensors based on CaFe2O4 nanopowders, which are p–type metal oxide semiconductor (MOX), have been fabricated and assessed for ethanol gas monitoring under visible light activation at room temperature. Regardless of their inferior sensitivit...
According to numerous previous reports, a Z-scheme with two photon absorbers is the most promising strategy to achieve artificial photosynthesis, but in addition to two efficient catalysts—one for oxygen evolution, the other for CO2 reduction&m...
Poly (3,4-ethylenedioxythiophene polystyrene sulfonate) (PEDOT:PSS) is a solution-processable hole transport layer known for its high work function and excellent hole mobility. The incorporation of graphene serves as an effective strategy to augment...
The demonstration of the complementary integrated circuit using printing processes is indispensable for realizing electronic devices using organic thin film transistors. Although complementary integrated circuits have advantages such as low power con...
Silicon german ium (SiGe) has attracted significant attention for applications in the source/drain (S/D) regions of p-type metal-oxide-semiconductor field-effect transistors (p-MOSFETs). However, in SiGe, as the Ge concentration increases, high-densi...
P-type delafossite CuGaO2 is a wide-bandgap semiconductor for optoelectronic applications, and its lattice parameters are very similar to those of n-type semiconductor wurtzite ZnO. Accordingly, the investigation of crystalline heterostructures of Cu...
Both CuI and CuI:Zn semiconductor thin films, along with MSM-structured UV photodetectors, were prepared on flexible mica substrates at low temperature (150 °C) by a wet chemical method. The two CuI-based films exhibited a polycrystalline phase w...
Organic polymer semiconductor materials are conveniently tuned to energy levels because of their good chemically modifiable properties, thus enhancing their carrier transport capabilities. Here, we have designed and prepared a polymer with a donor-ac...
In this study, a resistive humidity sensor for moisture detection at room temperature is presented. The thin film proposed as a critical sensing element is based on a quaternary hybrid nanocomposite CNHox//SnO2/ZnO/PVP (oxidated carbon nanohorns–tin...
This paper presents the relative humidity (RH) sensing response of a resistive sensor employing sensing layers based on a ternary nanocomposite comprising graphene oxide-oxidized carbon nanohorns-polyvinylpyrrolidone (GO-CNHox–PVP), at 1/1/1, 1/2/1,...
Solar light-driven hydrogen by photocatalytic water splitting over a semiconductor photoelectrode has been considered a promising green energy carrier. P-type semiconducting copper oxides (Cu2O and CuO) have attracted remarkable attention as an effic...
As a promising third-generation semiconductor,
Electrochemical deposition of silicon at room temperature is problematic due to the intrinsically low conductivity of the deposits. This study reports the photoelectrochemical (PEC) deposition of silicon (Si) and silicon–carbon (Si–C) lay...
The thermoelectric (TE) performance of iron silicide (β-FeSi2) can be enhanced by introducing metal dopants. However, such doping often leads to the emergence of secondary phases, which negatively affect the Seebeck coefficient and overall TE efficie...
Organic–inorganic ternary nanohybrids consisting of oxidized-single walled carbon nanohorns-SnO2-polyvinylpyrrolidone (ox-SWCNH/SnO2/PVP) with stoichiometry 1/1/1 and 2/1/1 and ox-SWCNH/ZnO/PVP = 5/2/1 and 5/3/2 (all mass ratios) were synthesiz...
This work reports on the role of structure and composition on the determination of the performances of p-type SnOx TFTs with a bottom gate configuration deposited by rf magnetron sputtering at room temperature, followed by a post-annealed step up to...
This study involved direct doping of In2O3 into silicon carbide (SiC) powder, resulting in 8.0 at% In-doped SiC powder. Subsequently, heating at 500 °C was performed to form a target, followed by the utilization of electron beam (e-beam) technolo...
The p-type semiconductors Cu
This study aimed to synthesize copper oxide (CuO) thin films using an eco-friendly green synthetic approach. A sol-gel spin coating technique was employed for the synthesis of the CuO thin film using Allium cepa as a reducing agent. The fabricated Cu...
In this work, we present conductometric gas sensors based on p-type calcium iron oxide (CaFe2O4) nanoparticles. CaFe2O4 is a metal oxide (MOx) with a bandgap around 1.9 eV making it a suitable candidate for visible light-activated gas sensors. Our ga...
Thin films of copper oxide (CuxO), titanium oxide (TiOx), and several mixtures of copper and titanium oxides ((CuTi)Ox) were deposited using magnetron sputtering. X-ray diffraction analysis of the as-deposited TiOx thin film revealed the presence of...
Cu3N with a cubic crystal structure is obtained in this paper by the sputtering of Cu under N2 followed by annealing under NH3: H2 at 400 °C, after which it was doped with iodine at room temperature resulting into p-type Cu3N with hole densities...
We report the design, synthesis, and physicochemical properties of an array of phenanthro[2,1-b:7,8-b’]dithiophene (PDT-2) derivatives by introducing five types of alkyl (CnH2n+1; n = 8, 10, 12, 13, and 14) or two types of decylthienyl groups a...
To investigate organic field-effect transistor (OFET) properties, a new thienoacene-type molecule, 4,14-dihexyldinaphtho[2,3-d:2’,3’-d’]anthra[1,2-b:5,6-b’]dithiophene (C6-DNADT), consisting of π-conjugated nine aromatic ri...
Gas sensors are an important part of smart homes in the era of the Internet of Things. In this work, we studied Ti-doped P-type WO3 thin films for liquefied petroleum gas (LPG) sensors. Ti-doped tungsten oxide films were deposited on glass substrates...
Nanocrystalline cobalt oxide Co3O4 has been prepared by precipitation and subsequent thermal decomposition of a carbonate precursor, and has been characterized in detail using XRD, transmission electron microscopy, and FTIR spectroscopy. The sensory...
Cobalt-doped iron disulfide (FeS2) thin films were synthesized via chemical bath deposition (CBD) followed by annealing at 450 °C, yielding phase-pure pyrite structures with multifunctional properties. A deposition temperature of 95 °C is cri...
In this paper, we present a one-step low-temperature solution combustion synthesis (SCS) of CuS nanoparticulated functional films processed via a simple blade-coating technique. This SCS route uses thiourea as a fuel and sulfur source, combined with...
This study demonstrated the epitaxial growth of single-phase (111) CoO and (111) Co3O4 thin films on a-plane sapphire substrates using an atmospheric pressure mist chemical vapor deposition (mist-CVD) process. The phase structure of the grown cobalt...
Photoelectrocatalytic hydrogen production is crucial to reducing greenhouse gas emissions for carbon neutrality and meeting energy demands. Pivotal advances in photoelectrochemical (PEC) water splitting have been achieved by increasing solar light ab...
Metal oxides are excellent candidates for the detection of various gases; however, the issues such as the limited operating temperature and selectivity are the most important ones requiring the comprehensive understanding of gas adsorption kinetics o...
In the original publication [...]
The graphene adjustable-barriers phototransistor is an attractive novel device for potential high speed and high responsivity dual-band photodetection. In this device, graphene is embedded between the semiconductors silicon and germanium. Both n-type...
of 10