Skip to Content

158 Results Found

  • Feature Paper
  • Article
  • Open Access
23 Citations
6,121 Views
21 Pages

13 April 2021

A solidification microstructure is formed under high cooling rates and temperature gradients in powder-based additive manufacturing. In this study, a non-equilibrium multi-phase field method (MPFM), based on a finite interface dissipation model, coup...

(This article belongs to the Special Issue Simulation of Microstructure Evolution in Additive Manufacturing)
  • Article
  • Open Access
36 Citations
9,505 Views
12 Pages

Integration of Processing and Microstructure Models for Non-Equilibrium Solidification in Additive Manufacturing

  • Noah Sargent,
  • Mason Jones,
  • Richard Otis,
  • Andrew A. Shapiro and ,
  • Jean-Pierre Delplanque and
  • Wei Xiong
  • + 1 author+ 0 author

1 April 2021

Integration of models that capture the complex physics of solidification on the macro and microstructural scale with the flexibility to consider multicomponent materials systems is a significant challenge in modeling additive manufacturing processes....

(This article belongs to the Special Issue Simulation of Microstructure Evolution in Additive Manufacturing)
  • Review
  • Open Access
2 Citations
782 Views
39 Pages

Laser Processing of Fe-Cr-B Alloys: Microstructure Evolution, Non-Equilibrium Solidification and Wear–Corrosion Performance

  • Lei He,
  • Changle Zhang,
  • Jiang Ju,
  • Zhizu Zhang and ,
  • Jintao Liu and
  • Huajun Zhang
  • + 1 author+ 0 author

30 June 2026

Fe-Cr-B alloys are recognized as candidate wear- and corrosion-resistant materials strengthened by high-hardness boride phases. Conventional casting produces coarse continuous network borides and severe elemental segregation under near-equilibrium sl...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
25 Citations
5,014 Views
11 Pages

Effects of Gd, Y Content on the Microstructure and Mechanical Properties of Mg-Gd-Y-Nd-Zr Alloy

  • Changping Tang,
  • Kai Wu,
  • Wenhui Liu,
  • Di Feng and ,
  • Xuezhao Wang,
  • Guodong Miao,
  • Maomao Yang,
  • Xiao Liu and
  • Quan Li
  • + 4 authors+ 0 author

3 October 2018

The effects of Gd, Y content on the microstructure and mechanical properties of Mg-Gd-Y-Nd-Zr alloy were investigated using hardness measurements, X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), and...

(This article belongs to the Special Issue Effect of Rare Earth Additions on the Microstructure, Mechanical Properties and Corrosion of Magnesium Alloys)
  • Article
  • Open Access
72 Citations
7,789 Views
12 Pages

Corrosion Behavior of Selectively Laser Melted CoCrFeMnNi High Entropy Alloy

  • Jie Ren,
  • Chaitanya Mahajan,
  • Liang Liu,
  • David Follette and ,
  • Wen Chen and
  • Sundeep Mukherjee
  • + 1 author+ 0 author

23 September 2019

CoCrFeMnNi high entropy alloys (HEAs) were additively manufactured (AM) by laser powder bed fusion and their corrosion resistance in 3.5 wt% NaCl solution was studied by potentiodynamic polarization and electrochemical impedance spectroscopy tests. A...

(This article belongs to the Special Issue Complex Concentrated Alloys (CCAs) - Current Understanding and Future Opportunities)
  • Review
  • Open Access
4 Citations
3,251 Views
10 Pages

Microstructure of Selective Laser Melted 316L under Non-Equilibrium Solidification Conditions

  • Emre Firat Özel,
  • Dennis Pede,
  • Claas Müller,
  • Yi Thomann and ,
  • Ralf Thomann and
  • Hadi Mozaffari-Jovein
  • + 1 author+ 0 author

24 November 2023

In this study, the microstructural properties of selective laser melted 316L stainless steel were investigated using optical, scanning and transmission electron microscopy as well as X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy. T...

  • Article
  • Open Access
2 Citations
2,892 Views
25 Pages

26 January 2024

The ability to control the temperature distribution T(t,r) and the rate of temperature change Rt,r inside glasses is important for their microstructuring. The lattice temperature is considered at time t, exceeding the electron–phonon thermaliza...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
16 Citations
6,333 Views
12 Pages

24 March 2020

The industrial production of products, such as foil and aluminium alloy strips, begins with the production of semi-finished products in the form of slabs. These are produced by the continuous casting process, which is quick and does not allow the equ...

(This article belongs to the Special Issue Structure and Properties of Aluminium Alloys)
  • Article
  • Open Access
9 Citations
2,769 Views
10 Pages

Single-Step Fabrication of Au-Fe-BaTiO3 Nanocomposite Thin Films Embedded with Non-Equilibrium Au-Fe Alloyed Nanostructures

  • Bethany X. Rutherford,
  • Hongyi Dou,
  • Bruce Zhang,
  • Zihao He and ,
  • James P. Barnard,
  • Robynne L. Paldi and
  • Haiyan Wang
  • + 2 authors+ 0 author

3 October 2022

Nanocomposite thin film materials present great opportunities in coupling materials and functionalities in unique nanostructures including nanoparticles-in-matrix, vertically aligned nanocomposites (VANs), and nanolayers. Interestingly the nanocompos...

(This article belongs to the Section Inorganic Materials and Metal-Organic Frameworks)
  • Communication
  • Open Access
6 Citations
3,764 Views
6 Pages

13 January 2022

The crystallographic orientation relationship between α and β phases during the non-equilibrium heat treatment of a Cu-37 wt. % Zn alloy was investigated. With this aim, Cu-37 wt. % Zn alloy plates with a thickness of 2 mm were heated at 8...

(This article belongs to the Special Issue Microstructure Characterization and Design of Alloys)
  • Review
  • Open Access
87 Citations
18,662 Views
39 Pages

20 June 2014

If a liquid is undercooled below its equilibrium melting temperature an excess Gibbs free energy is created. This gives access to solidification of metastable solids under non-equilibrium conditions. In the present work, techniques of containerless p...

(This article belongs to the Special Issue Advances in Solidification Processing)
  • Article
  • Open Access
48 Citations
8,711 Views
15 Pages

Effect of Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser-Melted Ti64 and Ti-5Al-5Mo-5V-1Cr-1Fe

  • Hongjie Bai,
  • Hao Deng,
  • Longqing Chen,
  • Xianbo Liu and ,
  • Xiaorong Qin,
  • Dingguo Zhang,
  • Tong Liu and
  • Xudong Cui
  • + 3 authors+ 0 author

25 March 2021

Additive manufacturing (AM) has shown the ability in processing titanium alloys. However, due to the unique thermal history in AM, the microstructure of AM-fabricated parts is metastable and non-equilibrium. This work was aiming to tailor the microst...

  • Article
  • Open Access
69 Citations
4,923 Views
13 Pages

21 June 2020

Wire arc additive manufacturing (WAAM) is known to induce a considerable microstructural inhomogeneity and anisotropy in mechanical properties, which can potentially be minimized by adopting appropriate post-printing heat treatment. In this paper, th...

  • Review
  • Open Access
3 Citations
3,273 Views
22 Pages

27 February 2025

This paper focuses on the microstructural characteristics of non-alloy structural steels with carbon contents below 0.3% (further—Low-Carbon Steel—LCS), as well as the possible structural transformations and the resultant mechanical prope...

(This article belongs to the Section Lasers, Light Sources and Sensors)
  • Feature Paper
  • Article
  • Open Access
1 Citations
2,648 Views
10 Pages

11 March 2021

The phase and microstructure formation as well as mechanical properties of the rapidly solidified Mg67Ag33 (at. %) alloy were investigated. Owing to kinetic constraints effective during rapid cooling, the formation of equilibrium phases is suppressed...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
12 Citations
8,350 Views
20 Pages

16 May 2022

A systematic analysis of industrial iron ore sinter product and associated sinter returns was undertaken. The samples were characterised through identification of the major macro- and micro-structural types present in these materials. Examination of...

(This article belongs to the Special Issue Mineralogy of Iron Ore Sinters, Volume II)
  • Article
  • Open Access
29 Citations
7,431 Views
18 Pages

Effects of Post Heat Treatments on Microstructures and Mechanical Properties of Selective Laser Melted Ti6Al4V Alloy

  • Jianwen Liu,
  • Jie Liu,
  • Yixin Li,
  • Ruifeng Zhang and ,
  • Zhuoran Zeng,
  • Yuman Zhu,
  • Kai Zhang and
  • Aijun Huang
  • + 3 authors+ 0 author

7 October 2021

The unique thermal history of selective laser melting (SLM) can lead to high residual stress and a non-equilibrium state in as-fabricated titanium alloy components and hinders their extensive use. Post heat treatment, as a classical and effective way...

(This article belongs to the Special Issue Lightweight Metals: Process, Microstructure, and Properties)
  • Article
  • Open Access
17 Citations
5,222 Views
10 Pages

Fabrication of Metastable Crystalline Nanocomposites by Flash Annealing of Cu47.5Zr47.5Al5 Metallic Glass Using Joule Heating

  • Ilya Okulov,
  • Ivan Soldatov,
  • Ivan Kaban,
  • Baran Sarac and ,
  • Florian Spieckermann and
  • Jürgen Eckert
  • + 1 author+ 0 author

1 January 2020

Flash Joule-heating was applied to the Cu47.5Zr47.5Al5 metallic glass for designing fully crystalline metastable nanocomposites consisting of the metastable B2 CuZr and low-temperature equilibrium Cu10Zr7 phases. The onset of crystallization was in s...

  • Article
  • Open Access
803 Views
13 Pages

Microstructure Heredity and Phase Transformation of CoFeB Pre-Alloyed Powder During Hot Pressing Sintering

  • Zehua Ren,
  • Qian Jia,
  • Junfeng Luo,
  • Xinran Li and ,
  • Zhaochong Ding,
  • Yutong Ran and
  • Jinjiang He
  • + 2 authors+ 0 author

12 August 2026

The Co40Fe40B20 alloy is a key magnetic material that combines high saturation magnetization with excellent soft magnetic properties, offering broad application prospects in fields such as spintronic devices, magnetic tunnel junctions, and tunnel mag...

(This article belongs to the Special Issue MXene-Based Electromagnetic Functional Devices)
  • Review
  • Open Access
65 Citations
8,191 Views
19 Pages

A Short Review on the Corrosion Behaviour of Wire and Arc Additive Manufactured Materials

  • Davi Alves Marques,
  • João Pedro Oliveira and
  • Ana Catarina Baptista

23 March 2023

Wire and Arc Additive Manufacturing (WAAM) is a deposition rate process for the creation and/or repair of large structural metallic components. The non-equilibrium heating and cooling conditions associated with WAAM lead to the development of heterog...

(This article belongs to the Special Issue Advanced Welding Technology in Metals II)
  • Article
  • Open Access
1 Citations
1,241 Views
13 Pages

Microstructure, Hardness and Tribological Characteristics of High-Entropy Coating Obtained by Detonation Spraying

  • Zhuldyz Sagdoldina,
  • Laila Sulyubayeva,
  • Dastan Buitkenov and
  • Yedilzhan Kambarov

4 July 2025

In this study, powders based on a high-entropy AlCoCrFeNi alloy obtained by mechanical alloying were successfully applied to a 316L stainless steel substrate by detonation spraying under various conditions. Their microstructural features, phase compo...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
7 Citations
6,251 Views
9 Pages

9 April 2018

The abnormal grain growth in the heat affected zone of the friction stir welded joint of 32Mn-7Cr-1Mo-0.3N steel after post-weld heat treatment was confirmed by physical simulation experiments. The microstructural stability of the heat affected zone...

(This article belongs to the Special Issue Friction Stir Welding and Processing in Alloy Manufacturing)
  • Article
  • Open Access
816 Views
22 Pages

Experimental Study of TiC, WC, and ZrC Particle Effects on the Gradient Structure and Properties of Austenitic Stainless Steel

  • Andrey Anikeev,
  • Ilya Chumanov,
  • Abdrakhman Naizabekov,
  • Sergey Lezhnev and
  • Evgeniy Panin

9 March 2026

Modern materials science is focused on the development of steels with a range of performance characteristics, including high strength, wear resistance, corrosion resistance, and long-term performance in various conditions. Special attention is paid t...

(This article belongs to the Section Materials Engineering)
  • Feature Paper
  • Article
  • Open Access
40 Citations
8,607 Views
14 Pages

Normalizing Effect of Heat Treatment Processing on 17-4 PH Stainless Steel Manufactured by Powder Bed Fusion

  • Si-Mo Yeon,
  • Jongcheon Yoon,
  • Tae Bum Kim,
  • Seung Ho Lee and ,
  • Tea-Sung Jun,
  • Yong Son and
  • Kyunsuk Choi
  • + 2 authors+ 0 author

20 April 2022

Laser powder bed fusion (L-PBF)-processed 17-4 PH stainless steel (SS) generally exhibits a non-equilibrium microstructure consisting mostly of columnar δ-ferrite grains and a substantial fraction of retained austenite and martensite, contrary...

(This article belongs to the Topic Additive Manufacturing)
  • Communication
  • Open Access
2 Citations
1,824 Views
9 Pages

A Rapid Spheroidizing Annealing Process for High-Carbon Steel

  • Bei Li,
  • Zhi Tong,
  • Mengying Zhao,
  • Xinlang Wu and
  • Wenyue Zheng

8 January 2026

Spheroidizing annealing is a critical heat treatment process for high-carbon steels to balance hardness and machinability. This study develops a rapid spheroidizing annealing process by employing low-temperature pretreatment followed by subcritical h...

(This article belongs to the Special Issue Additive Manufacturing and Forming Technologies of Alloy: Mechanical Properties and Microstructure Evaluation)
  • Article
  • Open Access
1 Citations
3,700 Views
14 Pages

23 June 2020

Hypoeutectic white cast irons containing 25% Cr are used in ore-processing industries due to their high resistance to erosive wear. Applying a Design of Experiments (DoE), the aim of this study is to analyse the influence of thermal processing factor...

  • Review
  • Open Access
265 Views
67 Pages

17 October 2026

Additive manufacturing provides a promising route for the precision fabrication and property tailoring of austenitic stainless steels because of its high design freedom, rapid customization capability, and near-net-shape manufacturing advantages. How...

(This article belongs to the Topic Additive Manufacturing: From Promise to Practice)
  • Article
  • Open Access
3 Citations
791 Views
19 Pages

The Role of Element Segregation in the Fracture Mechanism and Performance of Spot-Welded AlSi7MnMg Aluminum Alloy Joints

  • Hong Xu,
  • Miao Zhao,
  • Rui Wang,
  • Lijun Han and ,
  • Xiuming Cheng and
  • You Fang
  • + 1 author+ 0 author

14 February 2026

This study systematically investigates the microstructural characteristics and mechanical properties of resistance spot-welded joints in 3 mm thick non-heat-treatable die-cast AlSi7MnMg alloy, with particular focus on the influence of element segrega...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
4 Citations
3,079 Views
11 Pages

Influence of Heat Treatment on Microstructure and Mechanical Properties of Laser Cladding Coatings

  • Chen Yang,
  • Wenjing Chen,
  • Bo Tan,
  • Qingsong Luo and ,
  • Tao Cao and
  • Zhenlin Zhang
  • + 1 author+ 0 author

1 October 2024

This study investigates the influence of various heat treatment processes on the microstructure and properties of laser cladding Fe314 coatings. The microstructure, phases, and impact fracture morphology of the cladding layer were observed using X-ra...

(This article belongs to the Special Issue Laser Surface Engineering and Additive Manufacturing)
  • Article
  • Open Access
24 Citations
7,446 Views
15 Pages

1 February 2023

The aim of this manuscript was to study the influence of alloying elements on the phase transformation behavior in advanced high-strength multiphase steels. Continuous cooling transformation (CCT) and time–temperature–transformation (TTT)...

(This article belongs to the Section F: Engineering and Materials)
  • Article
  • Open Access
4 Citations
3,077 Views
11 Pages

Homogenisation Efficiency Assessed with Microstructure Analysis and Hardness Measurements in the EN AW 2011 Aluminium Alloy

  • Maja Vončina,
  • Aleš Nagode,
  • Jožef Medved,
  • Irena Paulin and ,
  • Borut Žužek and
  • Tilen Balaško
  • + 1 author+ 0 author

29 July 2021

When extruding the casted rods from EN AW 2011 aluminium alloys, not only their homogenized structure, but also their extrudable properties were significantly influenced by the hardness of the alloy. In this study, the object of investigations was th...

  • Article
  • Open Access
6 Citations
1,708 Views
10 Pages

Synthesis and Phase Evolution of a Nanocrystalline FexCrNiAl (x = 1.0, 0.5, 0.25) High-Entropy Alloys by Mechanical Alloying

  • Danni Yang,
  • Mingqing Liao,
  • Jingtao Huang,
  • Tianyi Han and ,
  • Nan Qu,
  • Yalin Wang and
  • Jingchuan Zhu
  • + 2 authors+ 0 author

11 December 2024

High-entropy alloys (HEAs) with ultrafine grained and high strength can be prepared by mechanical alloying (MA) followed by sintering. Therefore, MA, as a unique solid powder processing method, has many effects on the microstructures and mechanical p...

  • Article
  • Open Access
10 Citations
5,364 Views
13 Pages

A Combination of Alloy Modification and Heat Treatment Strategies toward Enhancing the Properties of LPBF Processed Hot Working Tool Steels (HWTS)

  • Iris Raffeis,
  • Frank Adjei-Kyeremeh,
  • Simon Ewald,
  • Johannes Henrich Schleifenbaum and
  • Andreas Bührig-Polaczek

Hot working tool steels (HWTS) are popular for industrial applications such as injection molding tools, and casting dies because of their high wear resistance, fatigue, strength, and toughness properties, even at elevated temperatures. Conventionally...

(This article belongs to the Special Issue Recent Advances in Processes and Design Methods for Additive Manufacturing)
  • Article
  • Open Access
7 Citations
7,009 Views
7 Pages

26 January 2017

Ti5Si3 is an attractive light weight reinforcement phase in hypereutectic Ti–Si-based alloys, however, the proeutectic Ti5Si3 phase is brittle and is easily coarsened when the alloy is prepared under normal solidification conditions, thereby limiting...

  • Article
  • Open Access
1 Citations
2,252 Views
15 Pages

Solidification Behavior of Dy-Tb-Fe Alloys through Experimental Study and Thermodynamic Calculation

  • Cong Tan,
  • Qi Wei,
  • Weifeng Cheng,
  • Xingyu Liu and ,
  • Yuchen Bai and
  • Jiang Wang
  • + 1 author+ 0 author

29 June 2023

In this work, the solidification microstructure and phase transitions of Dy-Tb-Fe alloy samples were studied by using scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS), X-ray diffraction (XRD) and differential thermal analysi...

(This article belongs to the Special Issue Metallic Materials: Microstructure, Phase Equilibria and Thermodynamics)
  • Article
  • Open Access
1 Citations
721 Views
20 Pages

Effect of Heat Treatment on the Microstructure and Mechanical Properties of Ti–6Al–4V Alloy Produced by L-PBF and PA-DED

  • Svetlana Gatina,
  • Andrey Stotskiy,
  • Alfiz Gareev,
  • Alexander Ryzhkin and ,
  • Irina Semenova,
  • Alexey Mamalat,
  • Olga Klimova-Korsmik,
  • Sergey Zherebtsov and
  • Nariman Enikeev
  • + 4 authors+ 0 author

14 July 2026

The manufacturing of personalized implants from Ti–6Al–4V alloy using additive manufacturing technologies is a promising direction in modern medicine. However, components produced by these methods are characterized by a non-equilibrium mi...

(This article belongs to the Special Issue Structure and Properties of Biomedical Alloys)
  • Article
  • Open Access
10 Citations
5,262 Views
15 Pages

Influence of Heat Treatment Parameters on the Microstructure of 17-4 PH Single Tracks Fabricated by Direct Energy Deposition

  • Mattia Merlin,
  • Cindy Morales,
  • Matteo Ferroni,
  • Annalisa Fortini and
  • Chiara Soffritti

14 January 2024

Post-fabrication heat treatment (PFHT) is one of the most applied strategies for achieving the desired microstructure and mechanical resistance on additive manufactured components because of the non-equilibrium microstructural state of the material i...

(This article belongs to the Special Issue Heat Treatment of Metals)
  • Article
  • Open Access
825 Views
19 Pages

20 April 2026

The segregation of brittle Laves phases remains a critical bottleneck limiting the performance of additive manufacturing (AM) nickel-based superalloys. While its evolution is governed by complex transient physical fields within the melt pool, a quant...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
6 Citations
2,143 Views
9 Pages

Features of Tribooxidation of the High-Entropy Coating (AlCrZrTiTa)N during Dry High-Speed Cutting

  • Anatoly Kovalev,
  • Dmitry Wainstein,
  • Egor Konovalov,
  • Vladimir Vakhrushev and ,
  • German Fox-Rabinovich,
  • Michael Fox-Rabinovich,
  • Stanislav Dmitrievskii and
  • Alexandr Tomchuk
  • + 3 authors+ 0 author

25 August 2023

The high-entropy PVD coating (AlCrZrTiTa)N, characterized by its high hardness (50–60 GPa), elastic modulus above 300 MPa, and high heat resistance up to 1300 °C, is used for coating cutting tools operating under extreme metalworking condit...

(This article belongs to the Section Ceramic Coatings and Engineering Technology)
  • Article
  • Open Access
9 Citations
4,567 Views
13 Pages

Experimental and Crystal Plasticity Finite Element Investigations of Plastic Anisotropy in Additively Manufactured Ti6Al4V Alloy

  • Zhanfeng Wang,
  • Mengyu Xu,
  • Xiao Liu,
  • Qing Lin and ,
  • Xiaoxuan Huang and
  • Hongmei Zhang
  • + 1 author+ 0 author

22 January 2024

Additive manufacturing, particularly the laser powder bed fusion (LPBF) technique, has ushered in a new era of intricate metallic component fabrication, leveraging the exceptional performance of the Ti6Al4V alloy. However, the intricate mechanical be...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
1 Citations
2,415 Views
25 Pages

11 February 2025

The aim of the present study was to develop a concept for the inverse analysis of wear mechanisms in cast steel wheels of a pig iron wagon after long-term operation. Samples were taken from the flange and the tread edge area of fourteen wheels. The i...

(This article belongs to the Special Issue Tribology in Vehicles)
  • Article
  • Open Access
281 Citations
23,337 Views
20 Pages

Laser and Electron Beam Additive Manufacturing Methods of Fabricating Titanium Bone Implants

  • Bartłomiej Wysocki,
  • Piotr Maj,
  • Ryszard Sitek,
  • Joseph Buhagiar and ,
  • Krzysztof Jan Kurzydłowski and
  • Wojciech Święszkowski
  • + 1 author+ 0 author

26 June 2017

Additive Manufacturing (AM) methods are generally used to produce an early sample or near net-shape elements based on three-dimensional geometrical modules. To date, publications on AM of metal implants have mainly focused on knee and hip replacement...

(This article belongs to the Section Optics and Lasers)
  • Article
  • Open Access
1 Citations
1,474 Views
13 Pages

Effect of Hot Isostatic Pressing on Mechanical Properties of K417G Nickel-Based Superalloy

  • Fan Wang,
  • Yuandong Wei,
  • Yi Zhou,
  • Wenqi Guo and ,
  • Zexu Yang,
  • Jinghui Jia,
  • Shusuo Li and
  • Haigen Zhao
  • + 3 authors+ 0 author

11 July 2025

The cast nickel-based superalloy K417G exhibits excellent high-temperature strength, but non-equilibrium solidification during casting can cause defects such as irreparable interdendritic microporosity, which significantly degrades its fatigue and cr...

(This article belongs to the Special Issue Microstructure and Characterization of Crystalline Materials)
  • Article
  • Open Access
10 Citations
3,719 Views
13 Pages

26 October 2021

Metastable cellular structures (MCSs) play a crucial role for the mechanical performance in concentrated alloys during non-equilibrium solidification process. In this paper, typifying the heterogeneous 316L stainless steel by laser additive manufactu...

(This article belongs to the Special Issue Gradient Nanograined Materials)
  • Review
  • Open Access
1 Citations
2,247 Views
36 Pages

Constructing Hetero-Microstructures in Additively Manufactured High-Performance High-Entropy Alloys

  • Yuanshu Zhao,
  • Zhibin Wu,
  • Yongkun Mu,
  • Yuefei Jia and ,
  • Yandong Jia and
  • Gang Wang
  • + 1 author+ 0 author

29 August 2025

High-entropy alloys (HEAs) have shown great promise for applications in extreme service environments due to their exceptional mechanical properties and thermal stability. However, traditional alloy design often struggles to balance multiple propertie...

(This article belongs to the Special Issue Recent Advances in High Entropy Alloys)
  • Article
  • Open Access
1,827 Views
17 Pages

25 May 2025

As a third-generation advanced high-strength steel (AHSS), δ-TRIP steel exhibits the characteristics of high strength, high plasticity, and low density. However, the addition of Al to steel will affect solidification and segregation, which may...

(This article belongs to the Special Issue Advanced High-Performance Steels: From Fundamental to Applications)
  • Feature Paper
  • Article
  • Open Access
15 Citations
3,214 Views
12 Pages

8 February 2023

In the present work, the effects of (i) Ti replacement by Hf and (ii) the synthesis method on microstructure and crystal structure evolution in the high-entropy alloy HfxTi(1−x)NbVZr are reported. The results of scanning electron microscopy and...

(This article belongs to the Special Issue Deformation Behavior and Mechanical Properties of High Entropy Alloys)
  • Article
  • Open Access
14 Citations
2,806 Views
12 Pages

Comparison on the Electrochemical Corrosion Behavior of Ti6Al4V Alloys Fabricated by Laser Powder Bed Fusion and Casting

  • Zhongwei Zhan,
  • Qi Zhang,
  • Shuaixing Wang,
  • Xiaohui Liu and ,
  • Hao Zhang,
  • Zhihua Sun,
  • Yulin Ge and
  • Nan Du
  • + 3 authors+ 0 author

4 July 2024

The non-equilibrium solidification process in the additive manufacturing of titanium alloy leads to special microstructures, and the resulting changes in corrosion behavior are worthy of attention. In this paper, the microstructure and electrochemica...

  • Article
  • Open Access
28 Citations
7,252 Views
14 Pages

28 January 2022

During the last decades, titanium alloys have been of great interest for lightweight applications due to their high strength in combination with a low material density. Current research activities focus on the investigation of near-α titanium a...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
4 Citations
2,749 Views
16 Pages

11 August 2025

This study investigates the microstructural evolution and mechanical response of an additively manufactured (PBF-LB/M) AlSi10Mg alloy subjected to severe plastic deformation via two passes of twist channel angular pressing (TCAP). Processing was cond...

(This article belongs to the Section F: Engineering and Materials)

of 4