506 Results Found

Ni-rich cathode LiNixCoyMn1-x-yO2 (NCM, x ≥ 0.5) materials are promising cathodes for lithium-ion batteries due to their high energy density and low cost. However, several issues, such as their complex preparation and electrochemical instability have...

A simple flow system employing a reversible-flow syringe pump was employed to synthesize uniform micron-size particles of chitosan-Cu(II) (CS-Cu(II)) catalyst. A solution of chitosan and Cu(II) salt was drawn into a holding coil via a 3-way switching...

Coal is the dominant energy resource in China. With the Chinese policy of committing to reducing peak carbon dioxide emissions and achieving carbon neutrality, coal separation has recently become a hot topic, especially the fluidized separation of fi...

Silica nanoparticles (NPs) are widely used in various industrial and biomedical applications. Little is known about the cellular uptake of co-exposed silica particles, as can be expected in our daily life. In addition, an inflamed microenvironment mi...

In recent years, bioactive glasses (BGs) have attracted enormous attention with their superior bioactivity, non-toxicity and degradability. Owing to their properties, they have been applied in various biological applications. In the present work, we...

Powder-based techniques are gaining increasing interest for the fabrication of microstructures on planar substrates. A typical approach comprises the filling of a mold pattern with micron-sized particles of the desired material, and their fixation th...

Oat husk (OH; hull) is a by-product generated from oat processing and is rich in insoluble fibre and phenolic compounds. The aim of this work was to study the particle size distribution, antioxidant activity, and phenolic profile of micronized OH. Fo...

To solve the problems associated with micron-sized aluminum (Al), including sintering, agglomeration, and slag deposition during the combustion of aluminized propellants, aluminum–lithium (Al-Li) alloy, prepared by introducing a small amount of...

Aerospace engines ingest small particles when operating in a particulate-rich environment, such as sandstorms, atmospheric pollution, and volcanic ash clouds. These micron particles enter their cooling channels, leading to film-cooling hole blockage...

Porous polydivinyl benzene (PDVB) microspheres of narrow size distribution were formed by a single-step swelling process of template uniform polystyrene microspheres with divinyl benzene (DVB), followed by polymerization of the DVB within the swollen...

In this study, a quasi-steady combustion model of an aluminum particle is established, which is more accurate to simulate the physical combustion process. Detailed gas-phase reaction mechanism and surface reaction mechanism are considered. Moreover,...

In the process of natural gas hydrate extraction, especially in offshore hydrate extraction, the multiphase flow inside the wellbore is complex and prone to flow difficulties caused by reservoir sand production, leading to pipeline blockage accidents...

Control of the porous structure and particle size is essential for improving the properties of polysilsesquioxane (PSQ) microspheres. Herein, using the strategy combining inverse suspension polymerization, two-step sol–gel- and polymerization-i...

Micronization is an emerging technology used in food production, in which the size of particles is reduced to microns in the processing of plant raw materials and by-products, thus making it an interesting research topic. Spinach stems are by-product...

The purpose of this study was to investigate the effect of micronization on the characteristics of black cumin pressing waste material. The basic composition, amino acid, and fatty acid content of the raw material—specifically, black cumin pres...

Features of the nanosecond discharge development in a non-uniform electric field are studied experimentally. High spatial resolution imaging showed that thin luminous tracks of great length with a cross-section of a few microns are observed against t...

This work proposes the use of quartz crystal microbalances (QCMs) as a method to analyze and characterize magnetorheological (MR) fluids. QCM devices are sensitive to changes in mass, surface interactions, and viscoelastic properties of the medium co...

Dual-scale (nano and micron) particle-reinforced TiB2/6061Al matrix composites with different contents of TiB2 were prepared using powder metallurgy, and then analyzed via microstructure observation and tests of microhardness, tensile properties, and...

In this study, the gas−particle flow field in a real-size industrial-scale micron air classifier manufactured by Phenikaa Group using 3D transient simulations with the FWC-RSM–DPM (Four-Way Coupling-Reynold Stress Model-Discrete Phase Mod...

To explore the effect of micronization on the structural, functional, and antioxidant properties of wheat bran, wheat bran with mean particle size (D50) of 46.08, 34.29, 26.51, 26.35, and 26.05 μm were prepared by using an ultrafine pulverizer und...

Controlling Radio Frequency (RF) signals through switching technology is of interest to designers of modern wireless platforms such as Advanced Wireless services (AWS) from 2.18 GHz–2.2 GHz, mid-bands of sub-6 GHz 5G (2.5 GHz and 3.5 GHz), and 4G ban...

The absorption of microplastics (MPs; size < 5 mm) by plants has garnered increasing global attention owing to its potential implications for food safety. However, the extent to which leafy vegetables can absorb large amounts of MPs, particularly...

In this paper, the effect of TiC particle size on the microstructure and mechanical properties of an Inconel 718/TiC composite material fabricated using binder jetting additive manufacturing was investigated. Vacuum sintering, hot isostatic pressing...

Nano-sized spherical copper powder has important applications in the fields of microelectronic devices, highly efficient catalysts and lubricant additives. In this study, nano-sized and micron-sized spherical copper powders were simultaneously prepar...

Power transformers are critical components of power grids, and their operational status characterization and fault diagnosis are crucial for power system reliability. Oil quality assessment is a crucial method for determining transformer status, and...

The present study investigates the high temperature tribological performance of spark plasma sintered, nano- and micron-sized tungsten carbide (WC) bonded by 9 wt.% cobalt (Co). The composites were fabricated using a two-step procedure of mixing foll...

This paper aims to develop a reliable and effective model to investigate the behavior of micron-sized biological glue droplets impacting micron-sized bioceramic powder beds applied to the 3D printing process. It also endeavours to explore the common...

A novel approach to electric explosion of intertwined wires to obtain homogeneous powder mixtures intended for preparing feedstock for extrusion 3D printing has been applied. The powder were composed of spherical micron- and nano-sized W/Cu particles...

Overcoming the strength–ductility trade-off in conventional aluminum matrix composites (AMCs) remains a significant challenge. This study employs dual-scale hybrid reinforcement particles comprising micron-sized Cu and nano-sized Ti, alongside...

In this article, we present the results of a study of the effect of TiC particle size on the microstructure and properties of a composite material based on the heat-resistant nickel alloy Inconel 718. Composite materials with the addition of 1% mass...

Transarterial chemoembolization (TACE) is a minimally invasive radiological procedure which consists of infusing a chemotherapeutic agent in the main arterial supplier of the liver tumor, usually emulsion-based doxorubicin, followed by the occlusion...

The study investigated the effects of a toughening agent and micron-sized toughening particles (TP) on the resin and carbon fiber-reinforced polymer (CFRP) composites, with a particular focus on compressive strength. The results showed that the addit...

The particle size of wheat bran plays an important role in the quality of reconstituted whole-wheat flour and its products. The effects of wheat bran particle size on the quality of reconstituted whole-wheat flour and its cooked noodles were analyzed...

In previous works, we had found that the addition of micron-sized, irregular-shaped aluminum (Al) powder, or Al nano platelets (flakes), improved the mechanical properties of polyesters, and that, additionally, the flakes led to an increase in electr...

Detecting micron-sized particles is an essential task for the analysis of complex plasmas because a large part of the analysis is based on the initially detected positions of the particles. Accordingly, high accuracy in particle detection is desirabl...

Cold-spraying technology is a solid-state, powder-based coating deposition and additive manufacturing (AM) technology, which utilises a high-pressure gas stream to accelerate micron-sized particles through a de-Laval nozzle for supersonic speed and i...

The magnesium nanosized ferrite powder with formula MgFe2O4 was synthesized via a pyrochemical sol–gel glycine–nitrate method and annealed consistently at temperatures of up to 1300 °C. The MgFe2O4 ferrite samples’ microstructur...

In this paper, micron-sized TiB2/AlZnMgCu(Sc,Zr) composites were fabricated by selective laser melting (SLM) using directly mixed powder. Nearly fully dense (over 99.5%) and crack-free SLM-fabricated TiB2/AlZnMgCu(Sc,Zr) composite samples were obtain...

After coal mine wastewater is artificially injected into a groundwater reservoir transformed from a goaf, micron-sized suspended matter in the wastewater is purified by the broken rock mass in the goaf. Existing studies can only analyze the macroscop...

In this communication we outline how the bespoke arrangements and design of micron-sized superparamagnetic shapes provide levers to modulate their assembly under homogeneous magnetic fields. We label this new approach, ‘assembly modulated by particle...

Spray pyrolysis of an aqueous solution of iron nitrate, proceeded with reduction of the product in hydrogen, gave iron powder with micron-sized hollow particles. Coating these iron particles with SiO2 through tetraethyl orthosilicate hydrolysis preve...

Micronized particles are commonly used to improve the content uniformity (CU), dissolution performance, and bioavailability of active pharmaceutical ingredients (API). Different particle engineering routes have been developed to prepare micron-sized...

Precise control of particle positioning is desirable in many optical propulsion and sorting applications. Here, we develop an integrated platform for particle manipulation consisting of a combined optical nanofiber and optical tweezers system. We sho...

The optimization of fabrication conditions for colloidal micron-sized oblates obtained by the deformation of an oil-in-hydrogel emulsion is reported. The influence of the type of emulsion stabilizer, ultrasonication parameters, and emulsion and gel m...

Polyaniline (PANI) is a conductive polymer easily converted into a conducting state. However, its limited mechanical properties have generated interest in fabricating PANI composites with other polymeric materials. In this study, a PANI–prevulc...

Submicron-sized quasi-spherical zinc oxide (ZnO) particles were prepared by wet ultrafine grinding in a stirred media mill under various conditions. The effects of parameters (i.e., solution type, acid or alkali concentration, solid content and grind...

Prelithiation is an important strategy used to compensate for lithium loss during the formation of a solid electrolyte interface (SEI) layer and the other irreversible reactions at the first stage of electrochemical cycling. In this paper, we report...

Micron-sized core-shell particles consisting of a calcium carbonate (CaCO3) mineral shell and a fluidic core were generated using a biomimetic approach, for the purpose of use as biodegradable microcapsules for release of active agents. Dinoflagellat...

Cold gas-dynamic spray (cold spray) is an evolving coating deposition and restoration technology in which particles are deposited above the sonic speed. This paper presents the non-destructive three-dimensional characterization of cold sprayed stainl...

Thermal interface materials (TIMs) are very crucial for better heat-transfer in electronics working as an interfacial connection between heat generators and heat sinks. This study is focused on the pressure-sensitive acrylic adhesive tape reinforced...