Skip to Content

11,789 Results Found

  • Article
  • Open Access
7 Citations
2,855 Views
13 Pages

Modeling Results for the Real Horizontal Heavy-Oil-Production Well of Mechanical Solids

  • Aleksey Dengaev,
  • Vladimir Shishulin,
  • Elena Safiullina and
  • Aleksandra Palyanitsina

17 July 2022

Recently, more and more new oil fields entering commercial production are complicated by the content of high-viscosity products, which are located at relatively shallow depths. For the rational development of such fields, a network of horizontal well...

(This article belongs to the Special Issue Advances in Techniques of Construction, Development and Operation of Oil and Gas Wells)
  • Review
  • Open Access
38 Citations
7,769 Views
22 Pages

26 October 2023

Investigating the constitutive relationship and the damage failure mechanism of solid propellants is of significance for improving the safety, storage period and use efficiency of solid rocket motors. This paper focuses on the complex mechanical resp...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
19 Citations
13,191 Views
13 Pages

Correlation of Mechanical and Electrical Behavior of Polyethylene Oxide-Based Solid Electrolytes for All-Solid State Lithium-Ion Batteries

  • Fabian Peters,
  • Frederieke Langer,
  • Nikolai Hillen,
  • Katharina Koschek and ,
  • Ingo Bardenhagen,
  • Julian Schwenzel and
  • Matthias Busse
  • + 2 authors+ 0 author

24 February 2019

Mechanical and electrochemical stability are key issues for large-scale production of solid state Li-ion batteries. Polymer electrolytes can provide good ionic conductivity, but mechanical strength needs to be improved. In this study, we investigate...

  • Review
  • Open Access
437 Views
27 Pages

Interfacial Instability and Induced Safety Failure Mechanisms in Sulfide Solid Electrolytes

  • Liyuan Zhang,
  • Chen Liang,
  • Jiarong Xu,
  • Zhe Wang and ,
  • Jinwen Chen,
  • Chuanhui Gong and
  • Wei Chen
  • + 2 authors+ 0 author

1 September 2026

Sulfide solid electrolytes (SSEs) are promising for all-solid-state lithium batteries (ASSLBs) due to their high ionic conductivity, mechanical deformability, and interfacial compatibility. However, SSE interfaces with anodes, cathodes, conductive ad...

  • Review
  • Open Access
49 Citations
7,613 Views
17 Pages

The Resistance Mechanisms of Checkpoint Inhibitors in Solid Tumors

  • Evangelos Koustas,
  • Panagiotis Sarantis,
  • Athanasios G. Papavassiliou and
  • Michalis V. Karamouzis

25 April 2020

The emergence of cancer immunotherapy has already shown some remarkable results, having changed the treatment strategy in clinical practice for solid tumors. Despite these promising long-term responses, patients seem to lack the ability to respond to...

(This article belongs to the Collection Recent Advances in Cancer Immunotherapy)
  • Review
  • Open Access
793 Views
68 Pages

Electro-Chemo-Mechanical Coupling in All-Solid-State Lithium Metal Batteries: From Stress Generation to Failure Mitigation

  • Qichanghao Li,
  • Ying Li,
  • Zihao Wang,
  • Kyu-Young Park and ,
  • Simon Fleischmann,
  • Hidemi Kato and
  • Eric Jianfeng Cheng
  • + 2 authors+ 0 author

3 October 2026

All-solid-state lithium metal batteries (ASSLMBs) promise enhanced safety and high energy density, yet their solid–solid interfaces create mechanical constraints absent from conventional liquid-electrolyte cells. Electrochemical reactions, ion...

(This article belongs to the Special Issue Integrated Approaches to Solid Electrolyte Development: Synthesis, Mechanics, and Data-Driven Frameworks)
  • Review
  • Open Access
  • Best Paper Award
116 Citations
24,642 Views
56 Pages

Solid lubricants, antiwear coatings, and self-lubricating composites are used in applications on spacecraft where oils and greases cannot be used because of the need to avoid lubricant volatility/migration, and where the application requires signific...

(This article belongs to the Special Issue Tribology of Space Mechanisms)
  • Article
  • Open Access
10 Citations
4,243 Views
12 Pages

Additive Effects of Solid Paraffins on Mechanical Properties of High-Density Polyethylene

  • Asae Ito,
  • Akid Ropandi,
  • Koichi Kono,
  • Yusuke Hiejima and
  • Koh-hei Nitta

6 March 2023

In this work, two types of solid paraffins (i.e., linear and branched) were added to high-density polyethylene (HDPE) to investigate their effects on the dynamic viscoelasticity and tensile properties of HDPE. The linear and branched paraffins exhibi...

(This article belongs to the Section Polymer Physics and Theory)
  • Feature Paper
  • Article
  • Open Access
10 Citations
4,547 Views
14 Pages

Effects of Process Parameters on Microstructure and Mechanical Properties of Semi-Solid Al-7Si-0.5Mg Aluminum Alloy by Gas Induced Semi-Solid Process

  • Guochao Gu,
  • Lixin Xiang,
  • Ruifen Li,
  • Wenhua Xu and ,
  • Yupeng Lu and
  • Raphaël Pesci
  • + 1 author+ 0 author

25 September 2022

Al-7Si-0.5Mg aluminum alloy semi-solid slurry with good spherical grains was prepared by gas induced semi-solid process (GISS) and the effects of both holding time and medium alloy addition on the microstructure of the semi-solid slurry were investig...

(This article belongs to the Special Issue Advances in Semi-solid Forming)
  • Review
  • Open Access
12 Citations
5,630 Views
17 Pages

20 January 2023

Increasing attention has been paid to the safety and efficiency of batteries due to the rapid development and widespread use of electric vehicles. Solid-state batteries have the advantages of good safety, high energy density, and strong cycle perform...

(This article belongs to the Special Issue Electro-Chemo-Mechanical Characterization and Modelling of Advanced Materials)
  • Article
  • Open Access
21 Citations
4,281 Views
13 Pages

10 November 2021

This study was aimed at determining the effect of microstructure on the macro-mechanical behavior of a composite solid propellant. The microstructure model of a composite solid propellant was generated using molecular dynamics algorithm. The correlat...

(This article belongs to the Section E: Engineering and Technology)
  • Review
  • Open Access
2 Citations
3,663 Views
18 Pages

Ion and water transport at the Angstrom/Nano scale has always been one of the focuses of experimental and theoretical research. In particular, the surface properties of the angstrom channel and the solid-liquid interface interaction will play a decis...

(This article belongs to the Section Physical Chemistry and Chemical Physics)
  • Article
  • Open Access
48 Citations
7,409 Views
14 Pages

11 March 2013

The mechanism of hydrothermal liquefaction of cypress was investigated by examining the effects of temperature and retention time on the characteristics of the solid residues remaining after liquefaction. The solid residues were divided into acid-sol...

  • Review
  • Open Access
44 Citations
8,672 Views
17 Pages

Mechanism and Engineering Characteristics of Expansive Soil Reinforced by Industrial Solid Waste: A Review

  • Jianhu Wei,
  • Jianmeng Wei,
  • Qijun Huang,
  • Sheikh Mohd Iqbal Bin S. Zainal Abidin and
  • Zhenjie Zou

10 April 2023

Expansive soils exhibit detrimental swelling and shrinking characteristics in response to variations in water content, posing a threat to engineering safety. Utilizing industrial solid waste for improving the engineering properties of expansive soil...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Review
  • Open Access
1 Citations
1,068 Views
23 Pages

The performance and durability of lithium metal solid-state batteries are governed by the dynamic evolution of the lithium/solid-electrolyte (Li/SSE) interface, where electrochemical reactions, mass transport, and mechanical constraints are intrinsic...

  • Article
  • Open Access
2 Citations
1,751 Views
21 Pages

Research on Thermo-Mechanical Response of Solid-State Core Matrix in a Heat Pipe Cooled Reactor

  • Xintong Peng,
  • Cong Liu,
  • Yangbin Deng,
  • Jingyu Nie and ,
  • Yingwei Wu and
  • Guanghui Su
  • + 1 author+ 0 author

13 March 2025

Due to its advantages of simple structure and high inherent safety, the heat pipe cooled reactor (HPR) could be widely applied in deep-sea navigation, deep-space exploration and land-based power supply as a promising advanced special nuclear power eq...

(This article belongs to the Special Issue Optimal Design and Analysis of Advanced Nuclear Reactors)
  • Article
  • Open Access
6 Citations
2,794 Views
17 Pages

Enabling Parallel Performance and Portability of Solid Mechanics Simulations Across CPU and GPU Architectures

  • Nathaniel Morgan,
  • Caleb Yenusah,
  • Adrian Diaz,
  • Daniel Dunning and ,
  • Jacob Moore,
  • Erin Heilman,
  • Evan Lieberman,
  • Steven Walton,
  • Sarah Brown and
  • Marko Knezevic
  • + 8 authors+ 3 authors

7 November 2024

Efficiently simulating solid mechanics is vital across various engineering applications. As constitutive models grow more complex and simulations scale up in size, harnessing the capabilities of modern computer architectures has become essential for...

(This article belongs to the Special Issue Advances in High Performance Computing and Scalable Software)
  • Article
  • Open Access
664 Views
14 Pages

Chemical Mechanical Lapping of 316 Based on Solid-Phase Fenton Reaction

  • Luguang Guo,
  • Kangyi Zhou,
  • Yaxin Tian,
  • Zongding Bao and ,
  • Li-An Zhang,
  • Jiahuan Wang and
  • Tianchen Zhao
  • + 2 authors+ 0 author

23 May 2026

To achieve both a high material removal rate and excellent surface quality, this paper proposes a solid-phase Fenton chemo-mechanical lapping (SF-CML) method. Using high-purity type 316 stainless-steel as the research object, a solid lapping tool con...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
423 Views
18 Pages

Mechanical Properties and Carbon Emission Characteristics of Loess Stabilized with Multi-Source Solid Waste Cementitious Materials

  • Bentian Yu,
  • Yuting Cai,
  • Leyu Niu,
  • Hao Wang and ,
  • Dongze Xia and
  • Xinzhu Li
  • + 1 author+ 0 author

26 July 2026

To address the high carbon emissions generated during the production of cement, lime, and other traditional soil stabilizers and to promote the resource utilization of industrial solid waste, this study proposed a low-carbon loess stabilization schem...

(This article belongs to the Section Construction and Building Materials)
  • Review
  • Open Access
11 Citations
5,149 Views
13 Pages

Research Progress on Heavy Metal Passivators and Passivation Mechanisms of Organic Solid Waste Compost: A Review

  • Yuanping Zhong,
  • Wenqing Yang,
  • Qian Zhuo,
  • Zhi Cao and ,
  • Qinghua Chen and
  • Liren Xiao
  • + 1 author+ 0 author

Organic solid waste is a renewable resource as it can be transformed into a valuable product through various technologies. Composting is considered to be the most economical and effective technology for treating organic solid waste, but excessive amo...

(This article belongs to the Section Industrial Fermentation)
  • Article
  • Open Access
11 Citations
2,702 Views
16 Pages

Mechanical Properties and Uniaxial Failure Behavior of Concrete with Different Solid Waste Coarse Aggregates

  • Mei Zhou,
  • Jinting Bai,
  • Shaowei Li,
  • Kai Zhang and ,
  • Chao Li and
  • Xinyi Wang
  • + 1 author+ 0 author

8 September 2022

To reveal the differences between the mechanical properties of solid waste coarse aggregate concrete and natural coarse aggregate concrete (NCAC) under equal strength, the basic mechanical properties of coarse aggregate concrete with seven different...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
17 Citations
3,309 Views
25 Pages

31 January 2023

This research used waste ceramic powder (CP) to replace aggregate, fly ash (FA) as filler, and combined them with sulfur to prepare composite cementitious materials. The variations of the mechanical properties with the aggregate proportions (aggregat...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
18 Citations
6,163 Views
14 Pages

Microstructural Evolution and Mechanical Properties of 7075 Aluminium Alloy during Semi-Solid Compression Deformation

  • Kai Wang,
  • Shengqing Hu,
  • Tianhao Wang,
  • Wenlong Xie and ,
  • Tong Guo,
  • Fuguo Li and
  • Rong Luo
  • + 2 authors+ 0 author

10 August 2022

Aluminium alloys are becoming increasingly popular due to the demands for high-performance lightweight components, and semi-solid metal processing (SSM) is a technique for forming near-net-shape and complex components with far fewer defects associate...

(This article belongs to the Special Issue Metals Manufacturing Techniques: Processing, Microstructure and Properties)
  • Article
  • Open Access
3 Citations
861 Views
19 Pages

Cracking-Resistance Mechanism of Fiber-Reinforced Coal-Based Solid-Waste Grouting Materials

  • Shuai Guo,
  • Weifeng Liang,
  • Xiangru Wu,
  • Chenyang Li and ,
  • Hongzeng Li,
  • Yahui Liu,
  • Shenyang Ouyang,
  • Yachao Guo and
  • Junmeng Li
  • + 4 authors+ 0 author

18 January 2026

Grouting technology can be employed to repair cracks in an aquifer to maintain its stability; however, existing grouting materials tend to come with problems such as low flexural strength, poor cracking resistance, and the coupled effects of fiber re...

(This article belongs to the Special Issue Low-Carbon Cementitious Composites)
  • Article
  • Open Access
6 Citations
7,307 Views
11 Pages

12 November 2017

Acrylic solid surface sheets were prepared by mixing different kinds of stone sludge fillers (SSF) in Poly (methyl methacrylate) (PMMA) nanocomposites. PMMA nanocomposite syrups were made using free radical polymerization of methylmethacrylate (MMA),...

(This article belongs to the Special Issue Polymer-Clay (Nano)Composites)
  • Article
  • Open Access
13 Citations
3,985 Views
18 Pages

21 August 2020

Ensuring the material durability of an electrolyte is a prerequisite for the long-term service of all-solid-state batteries (ASSBs). Herein, to investigate the mechanical integrity of a solid polymer electrolyte (SPE) in an ASSB upon electrochemical...

  • Article
  • Open Access
9 Citations
3,969 Views
10 Pages

7 September 2021

This study reports the microstructural changes and mechanical properties of high-strength aluminum alloy chips prepared in the semi-solid state at different temperatures, pressures, and holding times. In semi-solid processes, these processing paramet...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
10 Citations
2,179 Views
24 Pages

Experimental Study on Mechanical Properties of Coal-Based Solid Waste Nanocomposite Fiber Cementitious Backfill Material

  • Qiangqiang Cheng,
  • Haodong Wang,
  • Yaben Guo,
  • Bin Du and ,
  • Qixiang Yin,
  • Linglei Zhang,
  • Yue Yao and
  • Nan Zhou
  • + 3 authors+ 0 author

28 July 2023

Previous studies have shown that coal-based solid waste can be utilized in combination with cement, silica fume, and other modified materials to create a cemented backfill material. However, traditional cemented backfill materials have poor mechanica...

(This article belongs to the Special Issue Numerical Modeling and Mechanical Properties of Fiber-Reinforced Cementitious Composites)
  • Review
  • Open Access
869 Views
39 Pages

Modelling the Mechanical Properties of Architected Cellular Solids for Structural Applications: A Review

  • Jorge Luis Flores Alarcón,
  • Rafael Schouwenaars,
  • Armando Ortiz,
  • Leopoldo Ruiz-Huerta and ,
  • Manuel Farid Azamar and
  • Ignacio Alejandro Figueroa
  • + 1 author+ 0 author

24 June 2026

Among a broad range of promising applications, the use of cellular solids as lightweight structural components is an important field of research that requires reliable predictions of their stiffness and strength. Predictive and general models should...

(This article belongs to the Special Issue Mechanics of Thin-Walled Structures and Other Lightweight Constructions (Second Edition))
  • Review
  • Open Access
159 Citations
18,426 Views
24 Pages

Solid-Contact Ion-Selective Electrodes: Response Mechanisms, Transducer Materials and Wearable Sensors

  • Yan Lyu,
  • Shiyu Gan,
  • Yu Bao,
  • Lijie Zhong and ,
  • Jianan Xu,
  • Wei Wang,
  • Zhenbang Liu,
  • Yingming Ma,
  • Guifu Yang and
  • Li Niu
  • + 5 authors+ 0 author

Wearable sensors based on solid-contact ion-selective electrodes (SC-ISEs) are currently attracting intensive attention in monitoring human health conditions through real-time and non-invasive analysis of ions in biological fluids. SC-ISEs have gone...

(This article belongs to the Special Issue Advances in Artificial and Biological Membranes: Mechanisms of Ionic Sensitivity, Ion-Sensor Designs and Applications for Ions Measurement)
  • Review
  • Open Access
67 Citations
9,047 Views
22 Pages

13 September 2021

Hydrogen energy is a very attractive option in dealing with the existing energy crisis. For the development of a hydrogen energy economy, hydrogen storage technology must be improved to over the storage limitations. Compared with traditional hydrogen...

(This article belongs to the Topic Hydrogen Energy Technologies)
  • Review
  • Open Access
23 Citations
4,048 Views
18 Pages

Research Progress of Magnetic Field Regulated Mechanical Property of Solid Metal Materials

  • Yujun Hu,
  • Hongjin Zhao,
  • Xuede Yu,
  • Junwei Li and ,
  • Bing Zhang and
  • Taotao Li
  • + 1 author+ 0 author

20 November 2022

During the material preparation process, the magnetic field can act with high intensity energy on the material without contact and affect its microstructure and properties. This non-contact processing method, which can change the microstructure and p...

(This article belongs to the Special Issue Sustainable Manufacturing of Metallic Materials and Structures: Design, Processing and Characterization)
  • Article
  • Open Access
3 Citations
2,569 Views
20 Pages

12 August 2024

Municipal solid waste (MSW) has huge potential to be recycled as construction material, which would have significant benefits for environmental conservation. However, the cornerstone of this undertaking is a solid comprehension of the mechanical resp...

(This article belongs to the Special Issue Sustainable and Advanced Cementitious Materials)
  • Feature Paper
  • Review
  • Open Access
9 Citations
8,619 Views
16 Pages

Failure Modes, Mechanisms, Effects, and Criticality Analysis of Ceramic Anodes of Solid Oxide Fuel Cells

  • Nripendra K. Patel,
  • Sean R. Bishop,
  • Robert G. Utter,
  • Diganta Das and
  • Michael Pecht

15 November 2018

Solid oxide fuel cells (SOFCs) are a highly efficient chemical to electrical energy conversion devices that have potential in a global energy strategy. The wide adoption of SOFCs is currently limited by cost and concerns about cell durability. Improv...

(This article belongs to the Special Issue Renewable Electric Energy Systems)
  • Article
  • Open Access
7 Citations
2,691 Views
9 Pages

Enhanced Mechanical Properties of Yellow ZrN Ceramic with Addition of Solid Solution of TiN

  • Zongpeng Wu,
  • Zhen Gao,
  • Jun Zhao,
  • Saisai Li and ,
  • Qi Hao and
  • Songlin Ran
  • + 1 author+ 0 author

7 November 2022

As a superhard ceramic with a yellow color and excellent electrical conductivity, ZrN has potential applications in the field of decoration, but it is limited by its poor mechanical properties. In this work, the mechanical properties of ZrN ceramic w...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Article
  • Open Access
1 Citations
1,156 Views
22 Pages

Effect of Aging Time on the Microstructure and Mechanical Properties of Gravity-Cast and Semi-Solid Extruded Mg2Si-Al Composites

  • Dekun Zhou,
  • Xiaobo Liu,
  • Shimin Zhang,
  • Haifei Cao and ,
  • Miao Yang,
  • Peiyu Zang and
  • Zhaoyu Chen
  • + 2 authors+ 0 author

3 April 2026

Gravity casting and semi-solid extrusion were employed to prepare Mg2Si-Al composites. X-ray diffraction (XRD), optical microscopy (OM), scanning electron microscopy (SEM), EDS analysis, Vickers hardness testing, and tensile testing were used to comp...

(This article belongs to the Special Issue Advances in Lightweight Metallic Materials: Processes, Structures, and Manufacturing)
  • Article
  • Open Access
12 Citations
1,233 Views
46 Pages

12 November 2025

Municipal solid waste incineration generates by-products like nitrogen oxides, sulfur dioxide, and hydrogen chloride, contributing to environmental issues such as acid rain, ozone depletion, and photochemical smog. While industrial sites use desulfur...

(This article belongs to the Section Waste and Recycling)
  • Article
  • Open Access
16 Citations
4,303 Views
14 Pages

18 September 2023

In this work, two commercial extruded filaments for 3D printing obtained from different NatureWorks PLA resins (Ingeo™ Biopolymer 3D850 and Ingeo™ Biopolymer 4043D) were solid-state drawn at varying temperatures and subsequently heat trea...

  • Article
  • Open Access
21 Citations
2,944 Views
13 Pages

12 January 2023

It has been proven that it is a feasible treatment method to prepare paste filling material from coal-based solid waste to fill underground goaf. Based on the complexity of the goaf environment, especially the influence of humidity on paste filling m...

(This article belongs to the Collection Sustainable Development of Coal Based Energy: Technology, Environment, Humanities, Economy, and Education)
  • Article
  • Open Access
7 Citations
2,315 Views
15 Pages

Gas-Pressurized Torrefaction of Lignocellulosic Solid Wastes: Deoxygenation and Aromatization Mechanisms of Cellulose

  • Liu Shi,
  • Yiming Sun,
  • Xian Li,
  • Shuo Li and ,
  • Bing Peng,
  • Zhenzhong Hu,
  • Hongyun Hu,
  • Guangqian Luo and
  • Hong Yao
  • + 4 authors+ 0 author

20 November 2023

A novel gas-pressurized (GP) torrefaction method at 250 °C has recently been developed that realizes the deep decomposition of cellulose in lignocellulosic solid wastes (LSW) to as high as 90% through deoxygenation and aromatization reactions. Ho...

(This article belongs to the Special Issue Technologies for Carbon-Neutral Fuels with High Efficiency and Clean Utilization)
  • Article
  • Open Access
6 Citations
2,674 Views
17 Pages

Regulation Mechanism of Solid Waste on Ash Fusion Characteristics of Sorghum Straw under O2/CO2 Atmosphere

  • Ziqiang Yang,
  • Fenghai Li,
  • Mingjie Ma,
  • Xuefei Liu and ,
  • Hongli Fan,
  • Zhenzhu Li,
  • Yong Wang and
  • Yitian Fang
  • + 3 authors+ 0 author

12 October 2023

Co-combustion of solid waste and biomass can alleviate biomass ash-related problems. To investigate the effects of solid waste on the ash fusion characteristics of biomass and its variation mechanisms under an oxidation atmosphere, an X-ray diffracti...

(This article belongs to the Section B: Energy and Environment)
  • Article
  • Open Access
1 Citations
1,872 Views
18 Pages

Investigating the Formation and Molecular Solubilization Mechanism of Emodin Solid Dispersions by Molecular Dynamics Simulation

  • Jiaoyue Zhu,
  • Haiju Bai,
  • Shili Pan,
  • Wei Shen and ,
  • Jingying Li,
  • Xuehui Ding,
  • Lin Wang and
  • Wei Xu
  • + 3 authors+ 0 author

10 February 2025

The preparation of solid dispersions (SDs) of emodin (EMO) represents an effective strategy for enhancing its limited water solubility. However, there is a lack of effective strategies for carrier screening. The molecular mechanism underlying EMO-SDs...

(This article belongs to the Section Molecular Structure)
  • Article
  • Open Access
53 Citations
9,113 Views
17 Pages

Formability and Failure Mechanisms of Woven CF/PEEK Composite Sheet in Solid-State Thermoforming

  • Bing Zheng,
  • Xiping Gao,
  • Maoyuan Li,
  • Tianzhengxiong Deng and ,
  • Zhigao Huang,
  • Huamin Zhou and
  • Dequn Li
  • + 2 authors+ 0 author

3 June 2019

In this study, the formability of woven carbon-fiber (CF)-reinforced polyether-ether-ketone (PEEK) composite sheets in the solid-state thermoforming process were investigated, and the failure mechanisms were discussed. The formability of the woven CF...

(This article belongs to the Special Issue Mechanical Behavior of Polymers)
  • Article
  • Open Access
13 Citations
5,443 Views
18 Pages

Thermodynamic Analysis of the Formation of FCC and BCC Solid Solutions of Ti-Based Ternary Alloys by Mechanical Alloying

  • Claudio Aguilar,
  • Carola Martinez,
  • Karem Tello,
  • Sergio Palma and ,
  • Adeline Delonca,
  • Francisca San Martín and
  • Ismeli Alfonso
  • + 2 authors+ 0 author

15 April 2020

A thermodynamic analysis of the synthesis of face-centred cubic (fcc) and body-centred cubic (bcc) solid solutions of Ti-based alloys produced by mechanical alloying was performed. Four Ti-based alloys were analysed: (i) Ti-13Ta-3Sn (at.%), (ii) Ti-3...

  • Article
  • Open Access
11 Citations
2,579 Views
15 Pages

Solid-State Synthesis of SiC Particle-Reinforced AZ91D Composites: Microstructure and Reinforcement Mechanisms

  • Qian Shi,
  • Pengxing Cui,
  • Maoliang Hu,
  • Fei Wang and ,
  • Hongyu Xu and
  • Xiaobing Zhou
  • + 1 author+ 0 author

7 April 2024

Safe and efficient recycling of industrially generated machined chips is a high-priority technological issue. In this study, the effect of SiC particles (SiCp) on the microstructure and mechanical properties of SiCp/AZ91D composites is systematically...

(This article belongs to the Special Issue Studies on Microstructure and Mechanical Properties of Metal Matrix Composites)
  • Review
  • Open Access
13 Citations
9,260 Views
15 Pages

14 December 2017

This review is focused on the dimerization and dissociation of aromatic C-nitroso compounds and their dimers, the reactions that could be used as a convenient model for studying the thermal organic solid-state reaction mechanisms. This molecular mode...

(This article belongs to the Section Crystal Engineering)
  • Article
  • Open Access
13 Citations
3,044 Views
18 Pages

20 January 2025

To improve the mechanical and durability properties of low liquid limit soil, an eco-friendly, all-solid, waste-based stabilizer (GSCFC) was proposed using five different industrial solid wastes: ground granulated blast-furnace slag (GGBS), steel sla...

  • Article
  • Open Access
371 Views
20 Pages

30 August 2026

The large-scale accumulation of industrial solid wastes has caused serious environmental concerns, while the traditional cement industry urgently requires low-carbon alternatives to reduce CO2 emissions. In this study, a solid waste-based ferroalumin...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
2 Citations
2,957 Views
17 Pages

25 August 2021

This study is the first to use the diagonalization method for the new modelling of a homogeneous, thermoelastic, and isotropic solid sphere that has been subjected to mechanical damage. The fundamental equations were derived using the hyperbolic two-...

(This article belongs to the Special Issue New Trends in Crystals at Saudi Arabia)
  • Article
  • Open Access
24 Citations
10,442 Views
18 Pages

Physics-Informed Neural Network for Solving a One-Dimensional Solid Mechanics Problem

  • Vishal Singh,
  • Dineshkumar Harursampath,
  • Sharanjeet Dhawan,
  • Manoj Sahni and ,
  • Sahaj Saxena and
  • Rajnish Mallick
  • + 1 author+ 0 author

18 October 2024

Our objective in this work is to demonstrate how physics-informed neural networks, a type of deep learning technology, can be utilized to examine the mechanical properties of a helicopter blade. The blade is regarded as a one-dimensional prismatic ca...

of 236