The development of promising magnetic nanocatalysts is one of the key research topics in the field of catalysis. This is because of their versatile surface physicochemical, magnetic, and size-dependent catalytic properties. Herein, an optimization st...
The selective production of hydrocarbons for the chemical industry from biogenic feedstock is a significant challenge when ensuring hydrocarbon and fuel supply, despite the heterogeneity of this feed. In this study, guaiacol, as a surrogate for compl...
Bio-oil emulsions were stabilized using coconut shell coke, modified amphiphilic graphene oxide, and hydrophobic nano-fumed silica as solid emulsifiers. The effects of different particles on the stability of bio-oil emulsions were discussed. Over 21...
Driven by the growing energy crisis and environmental concerns regarding the utilization of fossil fuels, biomass liquefaction has emerged as a highly promising technology for the production of renewable energy and value-added chemicals. However, due...
The abundant metal-catalyzed selective hydrodeoxygenation of lipids to alcohols has great industrial application potential. Herein, a carbon-coated Co catalyst has been fabricated by a simple detonation-reduction method. This material exhibits outsta...
Guaiacol is a typical model compound used to investigate and understand the hydrodeoxygenation behaviour of bio-oils, which is critical to their application as an alternative to fossil resources. While extensive research has been carried out on devel...
Regulating the acid property of zeolite is an effective strategy to improve dehydration of intermediate alcohol, which is the rate-determining step in hydrodeoxygenation of lignin-based phenolic compounds. Herein, a commercial Hβ (SiO2/Al2O3 = 25) wa...
Catalytic hydrodeoxygenation (HDO) of aromatic aldehydes represents a core research direction in the efficient utilization of lignin. In this study, a cost-effective catalyst was constructed by incorporating rich lattice defects into Ni nanoparticles...
A process simulation model was created using Aspen Plus to investigate the hydrodeoxygenation of 4-propylguaiacol, a model component in lignin-derived pyrolysis oil, over a presulphided NiMo/Al2O3 solid catalyst. Process simulation modelling methods...
The in-situ hydrodeoxygenation of bio-derived phenol is an attractive routine for upgrading bio-oils. Herein, an active trimetallic Ni-Cu-Co/Al2O3 catalyst was prepared and applied in the in-situ hydrodeoxygenation of bio-derived phenol. Comparison w...
TiO2-supported catalysts have been widely used for a range of both liquid-phase and gas-phase hydrogenation reactions. However, little is known about the effect of their different crystalline surfaces on their activity during the hydrodeoxygenation p...
Hydrodeoxygenation is an essential process for producing liquid transportation fuels. In this study, the effects of CoMo/γ-Al2O3 catalysts form and loading ratio on the hydrodeoxygenation upgrading of bio-oil were investigated in a batch reacto...
Lignin is one of the main structural components of lignocellulosic biomass and can be utilized to produce phenolic compounds that can be converted downstream to cycloalkanes and aromatics, which are useful as drop-in road or aviation biofuels. Within...
Four nickel-based catalysts are synthesized by wet impregnation and evaluated for the hydrotreatment/hydrodeoxygenation of beech wood fast-pyrolysis bio-oil. Parameters such as elemental analysis, pH value, and water content, as well as the heating v...
Bimetallic NixCu(10−x)/γ-Al2O3 catalysts (where x is the mass fraction of Ni) with different Ni/Cu mass ratios were prepared. The catalysts were characterized by X-ray diffractometry, N2 adsorption–desorption, inductively coupled pl...
Glycerol hydrodeoxygenation to 1,2-propanediol (1,2-PDO) is a reaction of high interest. However, the need for hydrogen supply is a main drawback of the process. According to the concept investigated here, 1,2-propanediol is efficiently formed using...
The effect of support nature, SiO2 and γ-Al2O3, on physicochemical and catalytic properties of nickel phosphide catalysts in methyl palmitate hydrodeoxygenation (HDO) has been considered. Firstly, alumina-supported nickel phosphide catalysts pr...
Catalytic hydropyrolysis via the introduction of external hydrogen into catalytic pyrolysis process using hydrodeoxygenation catalysts is one of the major approaches of bio-oil upgrading. In this study, hydrodeoxygenation of acetone over Mo/HZSM-5 an...
Biomass can be converted into energy/fuel by different techniques, such as pyrolysis, gasification, and others. In the case of pyrolysis, biomass can be converted into a crude bio-oil around 50–75% yield. However, the direct use of this crude b...
This work aims at assessing the hydrodeoxygenation (HDO) of phenol over a promising catalytic material: a CoMoS-based active phase with a Co/(Co + Mo) = 0.2, supported on a promising mixed oxide, Al2O3-TiO2 (Al/Ti = 2). Particularly, to optimize the...
Hydrodeoxygenation (HDO) of bio-oils, lignin and their model compounds is summarized in this review. The main emphasis is put on elucidating the reaction network, catalyst stability and time-on-stream behavior, in order to better understand the prere...
To produce green diesel from black soldier fly larvae (BSFL; Hermetia illucens), the maximization of lipids in production and hydrodeoxygenation (HDO) reactions was investigated. In this study, BSFL were fed 12 diets based on three different substrat...
Novel bifunctional metal-loaded polymer–silica composite (PSC) catalysts were investigated in the hydrodeoxygenation (HDO) of 4-(2-furyl)-3-buten-2-one (FAc) as a model substance for furfural–acetone aldol condensation products. PSC catal...
Bio-oils derived from the pyrolysis of lignin-based biomass often contain a variety of oxygenated compounds, which can compromise their usefulness as a fuel. To improve the quality of bio-oil, catalytic hydrodeoxygenation (HDO) is a crucial step that...
The hydrodeoxygenation (HDO) of levulinic acid (LA) aldol condensation product dimers was studied between 250 and 300 °C and 50 bar H2 in a batch reactor with Ru catalyst supported on mesoporous zirconia. During the reaction, the unsaturated dimers,...
Hydrogenation stands out as one of the most promising techniques for converting biomass-derived molecules into valuable products. The expected products of upgrading biomass molecules include hydrocarbon, oxygenate, and methane. Ni-based catalysts hav...
Single-ring aromatic compounds including BTX (benzene, toluene, xylene) serve as essential building blocks for high-performance fuels and specialty chemicals, with extensive applications spanning polymer synthesis, pharmaceutical manufacturing, and a...
Bifunctional catalysts are a major type of heterogeneous catalytic systems that have been widely investigated for biomass upgrading. In this work, Ru-catalysts based on sulfonated porous aromatic frameworks (PAFs) were used in the hydrodeoxygenation...
The continuous demand for fossil fuels has directed significant attention to developing new fuel sources to replace nonrenewable fossil fuels. Biomass and waste are suitable resources to produce proper alternative fuels instead of nonrenewable fuels....
The hydrodeoxygenation (HDO) of renewable fats or fatty acids into alkanes is a powerful measure to address energy and environmental crises. Molybdenum carbide-based catalysts are promising due to their platinum-like noble metal electronic properties...
In this study, we elucidate the reaction kinetics for the simultaneous hydrodeoxygenation of xylitol to 1,2-dideoxypentitol and 1,2,5-pentanetriol over a ReOx-Pd/CeO2 (2.0 weight% Re, 0.30 weight% Pd) catalyst. The reaction was determined to be a zer...
The hierarchical HZSM-5 zeolite was prepared successfully by a simple NaOH treatment method. The concentration of NaOH solution was carefully tuned to optimal the zeolite acidity and pore structure. Under NaOH treatment conditions, a large number of...
As a model compound for lignin derivatives, anisole and its conversion are crucial for the upgrading of biomass resources. Anisole molecule contains a characteristic aryl ether bond (Caryl-O-CH3); therefore, the selective cleavage of the C-O bond to...
A porous phosphate heterostructure (PPHs) formed by a layered zirconium(IV) phosphate expanded with silica galleries was prepared presenting a P/Zr molar ratio equal to 2 and a (Si + Zr)/P ratio equal to 3. This pillared zirconium phosphate heterostr...
In bio-oil upgrading, the activity and stability of the catalyst are of great importance for the catalytic hydrodeoxygenation (HDO) process. The vapor-phase HDO of guaiacol was investigated to clarify the activity, stability, and regeneration ability...
Black liquor, the side stream from Kraft pulping, is a promising feedstock for the production of renewable fuels via hydrothermal liquefaction (HTL). However, further upgrading of the black liquor HTL oil is required to reduce the oxygen content for...
Lignin is an attractive renewable source of aromatics with a low effective hydrogen to carbon ratio (H/Ceff). The catalytic hydrodeoxygenation (HDO) of lignin-derived model compounds is a key strategy for lignin upgrading. In this work, the HDO of gu...
Hydrodeoxygenation of guaiacol in the presence of 1-octanol was studied in a fixed-bed reactor under mild conditions (50–250 °C) over platinum particles supported on silica (Pt/SiO2) and a zeolite with framework type MFI at a Si/Al-ratio of 45 (Pt/...
A series of NiM/SiO2 (M = Ce, Co, Cu, Fe, Sn, Zr, Mo) catalysts are prepared and used in the selective hydrodeoxygenation (HDO) of aliphatic acid to produce alkanes with the same number of carbon atoms as the reactant (alkane-Cx). The results indicat...
The doping of PP (polypropylene) with cotton straw improved the bio-oil yield, which showed there was a synergy in the co-pyrolysis of the cotton straw and PP at the range of 380–480 °C. In a fixed-bed reactor, model compounds and co-pyrolysis produc...
Oleic acid is a valuable molecule for biofuel production, as it is found in high proportions in vegetable oils. When used, oleic acid undergoes hydrodeoxygenation reactions and produces alkanes within the diesel range. These alkanes are free of oxyge...
Pyrolysis is considered the most promising way to convert biomass to fuels. Upgrading biomass pyrolysis oil is essential to produce high quality hydrocarbon fuels. Upgrading technologies have been developed for decades, and this review focuses on the...
Herein, cobalt-reduced graphene oxide (rGO) catalyst was synthesized with a practical impregnation–calcination approach for the selective hydrodeoxygenation (HDO) of guaiacol to cyclohexanol. The synthesized Co/rGO was characterized by transmis...
The supported Ni-P catalysts (marked as s-Ni-P/Hβ(3) and s-Ni-P/Ce-β(3)) were prepared by an incipient wetness step-impregnation method, and characterized by XRD, N2 physisorption, TEM, XPS, and NH3-TPD. The catalytic hydrodeoxygenation (HD...
Herein, Pt/HZSM-5 zeolite catalysts with different crystallite sizes ranging from nanosheet (~2 nm) to bulk crystals (~1.5 μm) have been prepared for the hydrodeoxygenation of guaiacol, and their effects on the reaction pathway and product selecti...
A series of Ni/KIT6 catalyst precursors with 25 wt.% Ni loading amount were reduced in H2 at 400, 450, 500, and 550 °C, respectively. The studied catalysts were investigated by XRD, Quasi in-situ XPS, BET, TEM, and H2-TPD/Ranalysis methods. It wa...
Basic oxides such as CaO and MgO were added to a γ-Al2O3 support in NiCu-catalyzed hydrodeoxygenation of anisole. A commercial CaO-MgO-γ-Al2O3 was compared to a benchmark γ-Al2O3 and in-house variants with sequential oxide impregnat...
Recently, catalysts based on transition metal phosphides (TMPs) have attracted increasing interest for their use in hydrodeoxygenation (HDO) processes destined to synthesize biofuels (green or renewable diesel) from waste vegetable oils and fats (kno...
Waste cooking oil is a valuable feedstock for renewable biofuels via hydrodeoxygenation reactions. This study presents a novel strategy with nickel catalysts supported by carbon derived from waste tire rubber (Ni/C). The findings reveal the synthesis...
In this work, a Mo2C catalyst that was supported on commercial carbon nanofibers (CNF) was synthetized and tested in the hydrodeoxygenation (HDO) of guaiacol. The effects of operating conditions (temperature and pressure) and reaction time (2 and 4 h...
of 5