Skip to Content

352 Results Found

  • Article
  • Open Access
2 Citations
1,715 Views
17 Pages

29 May 2024

The effects of electro-pulse on microstructure and mechanical properties of Al-Cu-Mn-Zr-V alloy were investigated, and the ageing mechanism was analyzed. As the current density increases, the size and quantity of precipitates gradually transit from c...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
2 Citations
3,155 Views
12 Pages

23 May 2022

It is necessary to develop new drilling and breaking technology for hard rock construction. However, the process of high-voltage electro-pulse (HVEP) rock-breaking is complex, and the selection of electro-pulse boring (EPB) process parameters lacks a...

(This article belongs to the Special Issue New Trends of Power Electronics Technology and Application in Energy Field)
  • Article
  • Open Access
7 Citations
5,158 Views
15 Pages

2 December 2019

The ductility of cobalt-free maraging steel is unsatisfactory because of the high content of Ti. Traditional heat treatment can not effectively improve the ductility of this kind steel. In this contribution, high-energy electro-pulsing is adopted in...

  • Article
  • Open Access
58 Citations
7,098 Views
17 Pages

Influences on High-Voltage Electro Pulse Boring in Granite

  • Changping Li,
  • Longchen Duan,
  • Songcheng Tan and
  • Victor Chikhotkin

17 September 2018

As the exploration and drilling of oil, natural gas and geothermal wells are expanding continuously, research into high-efficiency rock drilling technology is imperative. High-voltage electro pulse boring (EPB) has the advantages of high rock breakin...

  • Article
  • Open Access
68 Citations
5,941 Views
19 Pages

Damage Model and Numerical Experiment of High-Voltage Electro Pulse Boring in Granite

  • Changping Li,
  • Longchen Duan,
  • Songcheng Tan,
  • Victor Chikhotkin and
  • Wenpeng Fu

22 February 2019

High-voltage electro pulse boring (EPB) has the advantages of high rock-breaking efficiency and good wall quality, and is a new and efficient potential method of rock breaking. The EPB process is defined as random because it is affected by many facto...

  • Article
  • Open Access
16 Citations
4,897 Views
13 Pages

Novel Extract from Beetle Ulomoides dermestoides: A Study of Composition and Antioxidant Activity

  • Nina A. Ushakova,
  • Efim S. Brodsky,
  • Olga V. Tikhonova,
  • Alexander E. Dontsov and ,
  • Maria V. Marsova,
  • Andrey A. Shelepchikov and
  • Alexander I. Bastrakov
  • + 2 authors+ 0 author

A biologically active extract from the darkling beetle Ulomoides dermestoides was obtained using the electro-pulse plasma dynamic extraction method. The beetle water extract contained a complex of antioxidant substances such as antioxidant enzymes an...

  • Article
  • Open Access
18 Citations
4,293 Views
18 Pages

Simultaneously Enhanced Strength and Ductility of Al–Mg–Si Alloys during Aging Process Induced by Electro-Pulsing Treatment

  • Yitong Wang,
  • Yuguang Zhao,
  • Xiaofeng Xu,
  • Dong Pan and ,
  • Wenqiang Jiang and
  • Xueying Chong
  • + 1 author+ 0 author

28 April 2019

Most methods used for strengthening metallic materials, such as thermal-mechanical treatment, will sacrifice the ductility. A novel technology, electric pulsing treatment (EPT), is applied to break this trade-off, which produces an Al–Mg–...

  • Article
  • Open Access
789 Views
17 Pages

13 November 2025

By accelerating the migration of sulfate ions in potassium magnesium phosphate cement (PMPC) paste through an electric field, its sulfate resistance can be quickly evaluated, thereby making up for the defect of long test cycles in existing evaluation...

(This article belongs to the Special Issue Modeling and Analysis of Composite Materials and Structures in Civil Engineering (Second Edition))
  • Article
  • Open Access
4 Citations
2,846 Views
14 Pages

21 April 2023

A combination of the peroxymonosulfate (PMS) electro-activation process and the electro-oxidation process driven by a pulsed electric field (PEF) was used to degrade sulfadiazine (SND) wastewater. Mass transfer is the limiting step of electrochemical...

  • Article
  • Open Access
22 Citations
4,096 Views
21 Pages

The Utilization of a Coupled Electro-Thermal-Mechanical Model of High-Voltage Electric Pulse on Rock Fracture

  • Weikang Feng,
  • Pingping Rao,
  • Sanjay Nimbalkar,
  • Qingsheng Chen and ,
  • Jifei Cui and
  • Peihao Ouyang
  • + 1 author+ 0 author

17 February 2023

Our research proposes a unique coupled electro-thermal-mechanical model that takes electric breakdown and heterogeneity into account to show the mechanism of rock fracturing under high-voltage electropulses. Using finite element numerical software, t...

  • Article
  • Open Access
2 Citations
3,110 Views
15 Pages

Corrosion Behavior of an AISI/SAE Steel Cut by Electropulsing

  • Carlos Alberto Montilla,
  • Hernán Alberto González,
  • Valentina Kallewaard and
  • José Luis Tristancho

18 November 2019

The effect of electropulsing treatment (EPT) on the surface general corrosion behavior of an AISI/SAE 1045 steel under different machining regimes is studied. In the study, the following variables are alternated: high-speed steel (HSS) vs. hard metal...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
37 Citations
4,010 Views
18 Pages

Influence of Electropulsing Treatments on Mechanical Properties of UNS S32750 Duplex Stainless Steel

  • Claudio Gennari,
  • Luca Pezzato,
  • Gianmarco Tarabotti,
  • Andrea Zambon and ,
  • Andrea Di Schino and
  • Irene Calliari
  • + 1 author+ 0 author

1 April 2020

Prestrained at 5% and 15% duplex stainless steel UNS S32750 specimens have been subjected to electropulsing treatments with current density of 100 A/mm2 and 200 A/mm2 and 100 and 500 pulses for each current density value. Corrosion tests, X-ray diffr...

(This article belongs to the Special Issue Advances in Duplex Stainless Steels)
  • Article
  • Open Access
4 Citations
2,179 Views
13 Pages

Study on the Re-Aging Behavior of Cu-Rich Precipitates in a FeCu Alloy under Electropulsing

  • Shengjun Xia,
  • Tinghe Yang,
  • Menglin Gao,
  • Xing Hu and
  • Qiulin Li

11 March 2024

The nanoscale Cu-rich precipitates (CRPs) are one of the most critical microstructural features responsible for degrading the mechanical properties of reactor pressure vessel (RPV) steels. The prospect of the rapid regeneration of the service perform...

  • Review
  • Open Access
333 Views
36 Pages

6 September 2026

Difficult-to-machine metallic materials, distinguished by their high strength, hardness, and corrosion resistance, are indispensable in critical fields such as aerospace and defense. However, these very attributes also pose substantial challenges to...

(This article belongs to the Special Issue Advanced High-Performance Metals and Alloys: Microstructural Evolution, Mechanical Properties, and Strengthening Mechanisms)
  • Article
  • Open Access
17 Citations
5,810 Views
10 Pages

An Ultra-Fast Annealing Treatment by Electropulsing during Pure Copper Wire Drawing

  • Hernán A. González Rojas,
  • Antonio J. Sánchez Egea,
  • Saqib Hameed and
  • Raul Bolmaro

23 November 2019

The influence of electropulses in situ on the drawing process of copper wires was investigated, with the aim of avoiding time consuming annealing thermal treatments. It was found that with the application of electropulses, tensile and drawing forces...

(This article belongs to the Special Issue Forming and Heat Treatment of Modern Metallic Materials)
  • Review
  • Open Access
550 Views
18 Pages

Nanosecond Pulsed Electric Fields for Extracellular Vesicle Engineering: From Electro-Exocytosis to Cargo Modulation

  • Art Neal,
  • Teresa Graham,
  • Mohamadmahdi Samandari,
  • Arash Ghorbannia and ,
  • Anca Dobrian,
  • Stephen J. Beebe and
  • Ruben M. L. Colunga-Biancatelli
  • + 2 authors+ 0 author

1 August 2026

Extracellular vesicles (EVs), including small extracellular vesicles (sEVs) and medium/large extracellular vesicles (MVs), have emerged as promising therapeutic vectors and diagnostic biomarkers across various branches of biomedicine. However, the cl...

(This article belongs to the Section Applied Biosciences and Bioengineering)
  • Review
  • Open Access
122 Citations
13,970 Views
25 Pages

Application of High-Density Electropulsing to Improve the Performance of Metallic Materials: Mechanisms, Microstructure and Properties

  • Yinying Sheng,
  • Youlu Hua,
  • Xiaojian Wang,
  • Xueyang Zhao and ,
  • Lianxi Chen,
  • Hanyu Zhou,
  • James Wang,
  • Christopher C. Berndt and
  • Wei Li
  • + 4 authors+ 0 author

24 January 2018

The technology of high-density electropulsing has been applied to increase the performance of metallic materials since the 1990s and has shown significant advantages over traditional heat treatment in many aspects. However, the microstructure changes...

  • Article
  • Open Access
34 Citations
5,183 Views
10 Pages

Influence of the Regime of Electropulsing-Assisted Machining on the Plastic Deformation of the Layer Being Cut

  • Saqib Hameed,
  • Hernán A. González Rojas,
  • José I. Perat Benavides,
  • Amelia Nápoles Alberro and
  • Antonio J. Sánchez Egea

25 May 2018

In this article, the influence of electropulsing on the machinability of steel S235 and aluminium 6060 has been studied during conventional and electropulsing-assisted turning processes. The machinability indices such as chip compression ratio ξ...

(This article belongs to the Special Issue Machining—Recent Advances, Applications and Challenges)
  • Article
  • Open Access
8 Citations
3,498 Views
20 Pages

The Role of Electric Current-Associated Free Energy and Forced Convection on Grain Refinement in Pure Aluminum under Electropulsing

  • Ning Li,
  • Limin Zhang,
  • Rong Zhang,
  • Pengfei Yin and ,
  • Hongjing Wu,
  • Kaikai Song and
  • Hui Xing
  • + 2 authors+ 0 author

22 November 2019

An experimental study with respect to the effect of an alternating electropulsing on grain refinement in pure aluminum was reported. The macrostructural observation with the mold preheated to different temperature and embedded the metal mesh indicate...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
6 Citations
3,079 Views
7 Pages

26 July 2021

The electro-optical process is a popular method for terahertz radiation detection. Detectors based on the electro-optical process have large bandwidth, and the signal-to-noise ratio (SNR) is relatively high. Further, this detector can be applied to d...

(This article belongs to the Special Issue Applications of Millimeter-Wave and Terahertz Technologies)
  • Article
  • Open Access
140 Views
17 Pages

Effect of Electropulsing on the Evolution of MnS and Oxy-Sulfide Composite Inclusions During Solidification of 304 Stainless Steel

  • Danbin Jia,
  • Wuguo Chen,
  • Xinyue Song,
  • Chun He and ,
  • Xiaofeng Li,
  • Songyuan Ai and
  • Mujun Long
  • + 2 authors+ 0 author

31 October 2026

Manganese sulfide (MnS)inclusions can markedly influence the mechanical properties, corrosion resistance, and processing behavior of stainless steels, making their control during solidification an important issue for improving steel quality. In this...

(This article belongs to the Special Issue Design, Processing and Characterization of Metals and Alloys (2nd Edition))
  • Article
  • Open Access
59 Citations
10,508 Views
13 Pages

23 September 2013

A technique to heal a fatigue crack in austenitic stainless steel SUS316 by applying a controlled, high-density pulsed current was developed. A surface-activated pre-coating (SAPC), which eliminates the oxide layer and coats a Ni film on the crack s...

  • Article
  • Open Access
12 Citations
3,577 Views
11 Pages

Effect of Electropulsing Treatment on Microstructure and Mechanical Properties of a Deformed ZrTiAlV Alloy

  • Zhi Nan Yang,
  • Feng Jiang,
  • Xu Biao Wang,
  • Lin Qu and ,
  • Yan Guo Li,
  • Lin Jiang Chai and
  • Fu Cheng Zhang
  • + 2 authors+ 0 author

30 October 2019

In contrast to conventional heat treatment processes, electropulsing not only heats an alloy, but also exerts some other positive effects during the heating process. In this paper, the microstructural evolution and mechanical properties of a deformed...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
1 Citations
1,702 Views
16 Pages

Strengthening and Toughening of ZG25SiMn2CrB Steel without Tempering Brittleness via Electropulsing Treatment

  • Yang Zhao,
  • Xinwei Cui,
  • Yuguang Zhao,
  • Zhihui Zhang and ,
  • Lijun Shi,
  • Baoyu Zhang and
  • Luquan Ren
  • + 2 authors+ 0 author

21 May 2024

High-strength low-alloy steels are widely used, but their traditional heat-treatment process is complex, energy-intensive, and makes it difficult to fully exploit the material’s potential. In this paper, the electropulsing processing technology...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
70 Views
17 Pages

Effects of Electropulsing at Different Solidification Stages on the Pitting Corrosion Behavior of SUS303 Stainless Steel

  • Danbin Jia,
  • Yanming Zhang,
  • Xinyue Song,
  • Pan Sun and ,
  • Songyuan Ai,
  • Mujun Long and
  • Dengfu Chen
  • + 2 authors+ 0 author

11 November 2026

SUS303 austenitic stainless steel has excellent machinability owing to its relatively high sulfur content, but MnS inclusions also promote localized corrosion. In this study, electropulsing was applied at three characteristic stages, namely the high-...

(This article belongs to the Special Issue Properties and Behaviors of Metallic Materials)
  • Article
  • Open Access
3 Citations
1,146 Views
12 Pages

Rotating Bending Fatigue Properties of 30CrNi2Mo Steel After Electropulsing-Assisted Ultrasonic Surface Rolling Process

  • Dan Liu,
  • Hongsheng Huang,
  • Yalin Shen,
  • Jie Liu and ,
  • Changsheng Tan,
  • Haonan Fan and
  • Yinglin Ke
  • + 2 authors+ 0 author

12 September 2025

With the rapid development of mechanical components, increasingly stringent demands are placed on steel properties—particularly tensile strength and rotating bending fatigue resistance. This study systematically investigates the effects of the...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
11 Citations
3,006 Views
11 Pages

Rapid Microstructure Homogenization of a Laser Melting Deposition Additive Manufactured Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy by Electropulsing

  • Dandan Ben,
  • Huajie Yang,
  • Jiabao Gao,
  • Bingyu Yang and ,
  • Yu’ang Dong,
  • Xiangyu Liu,
  • Xuegang Wang,
  • Qiqiang Duan,
  • Peng Zhang and
  • Zhefeng Zhang
  • + 5 authors+ 0 author

13 October 2022

The typical microstructure of the laser melting deposition (LMD) additive-manufactured Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy (TC11) contains the heat-affected bands (HABs), the narrow bands (NBs) and the melting pools (MPs) that formed due to the reheatin...

  • Article
  • Open Access
15 Citations
5,078 Views
14 Pages

Effect of Electropulsing Treatment on the Fatigue Crack Growth Behavior of Copper

  • Yan Yin,
  • Haibo Chen,
  • Yasuyuki Morita,
  • Yuhki Toku and
  • Yang Ju

2 November 2018

Crack propagation was quantitatively evaluated to investigate the effect of electropulsing treatment (EPT) on fatigue crack growth of copper specimens. Varying fatigue cycles were obtained under six different load levels. The crack lengths were measu...

(This article belongs to the Special Issue Grain Boundary Segregation and Related Phenomena in Metals and Alloys)
  • Article
  • Open Access
2 Citations
2,846 Views
15 Pages

14 March 2022

The evolution of the martensite–austenite (MA) constituent in the heat-affected zone (HAZ) of high-strength steel FH690 welds when subjected to electropulsing (EP) treatment was investigated herein, with the aim of eliminating brittle MA to enh...

(This article belongs to the Special Issue Assessment of Metallurgical and Mechanical Properties of Welded Joints via Numerical Simulation and Experiments)
  • Article
  • Open Access
10 Citations
3,421 Views
15 Pages

Two-Layer Nanocomposite TiC-Based Coatings Produced by a Combination of Pulsed Cathodic Arc Evaporation and Vacuum Electro-Spark Alloying

  • Philipp Kiryukhantsev-Korneev,
  • Alina Sytchenko,
  • Alexander Sheveyko,
  • Dmitry Moskovskikh and
  • Stepan Vorotylo

23 January 2020

A novel two-stage technology combining vacuum electro-spark alloying (VESA) and pulsed cathodic arc evaporation (PCAE) was approbated for the deposition of TiC-based coatings in inert (Ar) and reactive (C2H4) atmospheres. The deposition was carried o...

(This article belongs to the Special Issue Advances in Diamond-Like Carbon (DLC) Films)
  • Communication
  • Open Access
7 Citations
2,991 Views
9 Pages

High Thermal Stability of a Colony and Basket-Weave Mixed Microstructure in Selective-Laser-Melted Ti-6Al-4V AlloyInduced by Electropulsing

  • Lai Wei,
  • Xiaofeng Xu,
  • Yang Zhao,
  • Xudong Yan and ,
  • Yachong Zhou,
  • Zhicheng Wu and
  • Yongqiang Yu
  • + 2 authors+ 0 author

7 March 2023

A colony and basket-weave mixed microstructure in the selective-laser-melted (SLM) Ti-6Al-4V alloy was introduced by electropulsing, which showed high thermal stability. The mechanism was investigated by electron backscatter diffraction (EBSD) and X-...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
19 Citations
4,351 Views
27 Pages

Mechanism Analysis of Rock Failure Process under High-Voltage Electropulse: Analytical Solution and Simulation

  • Pingping Rao,
  • Peihao Ouyang,
  • Sanjay Nimbalkar,
  • Qingsheng Chen and ,
  • Jifei Cui and
  • Zhilin Wu
  • + 1 author+ 0 author

16 March 2022

This work aims to investigate and analyse the mechanism of rock failure under high-voltage electropulses in order to evaluate and increase the efficiency of high-voltage pulse technology in geological well drilling, tunnel boring, and other geotechni...

(This article belongs to the Special Issue Advancement of Functionalized Mineral Materials and Rock)
  • Article
  • Open Access
10 Citations
3,229 Views
13 Pages

Static Recrystallization Microstructure Evolution in a Cold-Deformed Ni-Based Superalloy during Electropulsing Treatment

  • Hongbin Zhang,
  • Chengcai Zhang,
  • Baokun Han,
  • Kuidong Gao and ,
  • Ruirui Fang,
  • Nana Deng and
  • Haiping Zhou
  • + 2 authors+ 0 author

30 September 2020

The influence of electropulsing treatment (EPT) parameters on the static recrystallization (SRX) microstructure in a cold-deformed Ni-based superalloy was investigated. During EPT, both the volume fraction of SRX grains and the average grain size inc...

  • Review
  • Open Access
32 Citations
8,046 Views
30 Pages

21 March 2024

Residual stress is caused by non–uniform deformation caused by non–uniform force, heat and composition, which is of great significance in engineering applications. It is assumed that the residual stress is always the upper limit of the el...

  • Communication
  • Open Access
4 Citations
2,536 Views
9 Pages

Rapid Spheroidization Process of S Phase (Al2CuMg) in the As-Cast 2024 Al Alloy Induced by High-Energy Electropulsing

  • Lai Wei,
  • Xiaofeng Xu,
  • Yang Zhao,
  • Xudong Yan and ,
  • Yachong Zhou,
  • Yongqiang Yu and
  • Zhicheng Wu
  • + 2 authors+ 0 author

29 October 2023

The effect of electropulsing treatment (EPT) on the microstructure of the as-cast 2024 Al alloy at room temperature was investigated. The results show that EPT remarkably accelerated the spheroidizing of second phase (S phase) in the as-cast 2024 Al...

  • Article
  • Open Access
6 Citations
1,854 Views
12 Pages

Effect of Electropulsing Current Density on the Strength–Ductility Synergy of Extruded Mg-6Al-1Zn Alloy

  • Dong Ma,
  • Chunjie Xu,
  • Yaohan Lu,
  • Shang Sui and ,
  • Jun Tian,
  • Fanhong Zeng,
  • Sergei Remennik,
  • Dan Shechtman,
  • Zhongming Zhang and
  • Yuanshen Qi
  • + 6 authors+ 1 author

8 February 2025

The difficulty in enhancing both tensile strength and ductility is limiting the development of high-performance Mg alloys. The “plastic deformation + electropulsing (EP) treatment” is an effective process for modifying the microstructure...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2 Citations
1,833 Views
13 Pages

Rapid Stress Relief of Ti-6Al-4V Titanium Alloy by Electropulsing Treatment

  • Aprilia Aprilia,
  • Jin Lee Tan,
  • Zixuan Ling,
  • Vincent Gill and ,
  • Paul Williams,
  • Martyn A. Jones and
  • Wei Zhou
  • + 2 authors+ 0 author

11 December 2025

This study investigates the effectiveness and underlying mechanisms of electropulsing treatment (EPT) for rapid stress relief of Ti-6Al-4V titanium alloy. Stress relief is an essential step in manufacturing processes to ensure long component lifespan...

(This article belongs to the Special Issue Microstructure, Mechanical and Corrosion Properties of Metals, Alloys, and Composite Materials)
  • Article
  • Open Access
3 Citations
3,484 Views
9 Pages

Determination of a High-Power THz Detector for EA-FEL Radiation Using Optical Sampling of GaAs and ZnTe Crystals

  • Adnan Haj Yahya,
  • Michael Gerasimov,
  • Johnathan Ciplis,
  • Nezah Balal and
  • Aharon Friedman

3 November 2022

This paper presents a diagnostic method for THz pulses produced by EA-FEL. Experimental results present a comparison between ZnTe and GaAs crystals for the detection of a single terahertz pulse using electro-optic sampling. In order to match an elect...

  • Article
  • Open Access
2 Citations
3,045 Views
28 Pages

9 October 2025

This paper presents a comprehensive comparative analysis of high-voltage, high-frequency pulse generation techniques for Pockels cell drivers. These drivers are critical in electro-optic systems for laser modulation, where nanosecond-scale voltage pu...

(This article belongs to the Section Electrical, Electronics and Communications Engineering)
  • Article
  • Open Access
837 Views
17 Pages

The Effect of Electropulsing-Assisted Ultrasonic Surface Rolling Process on the Friction and Wear Properties of AA 2024-T3

  • Daoyin Xin,
  • Guangjun Chen,
  • Yuhang Liang,
  • Wenqi Wang and ,
  • Chuan He,
  • Yingxin Lv,
  • Bo Zhang and
  • Jiashuai Huang
  • + 3 authors+ 0 author

Aluminum alloy (AA) 2024-T3 is widely used in the aerospace industry due to its high specific strength and superior fatigue resistance, yet its moderate hardness and inadequate wear resistance fail to meet service demands under severe wear conditions...

  • Article
  • Open Access
5 Citations
2,575 Views
16 Pages

24 August 2022

The enhancement of both low-temperature impact toughness and the hardness of a high strength steel heat-affected zone (HAZ) is investigated by using high-density electropulsing (EP). The athermal and thermal effects of EP on HAZ microstructure and re...

(This article belongs to the Special Issue Recrystallization and Phase Transformation of Steel Materials)
  • Article
  • Open Access
10 Citations
3,982 Views
16 Pages

5 December 2019

Application of electric current pulses during plastic deformation changes the mechanical behavior owing to the electro-plastic effect. The effect of electric current pulses on the Al5052 alloy is investigated in this study. In order to demonstrate th...

  • Article
  • Open Access
4 Citations
3,196 Views
24 Pages

A Novel PWM Signal-Generation Strategy for Pockels Cell Drivers

  • Yajun Wu,
  • Wenqing Liu,
  • Jinxin Chen,
  • Xinhui Sun and
  • Tianshu Zhang

A Pockels cell driver (PCD) can be viewed as a high-voltage pulse width generator for controlling the bi-refringence effect of electro-optical crystals. The main features of a PCD include a high repetition rate, fast on and off switching, variable pu...

  • Article
  • Open Access
460 Views
14 Pages

Thermal-Input-Induced Microstructural Evolution and Mechanical Response of Mg-Gd-Y-Zn-Zr Alloy Wires During Electropulsing Treatment

  • Jinchao Zou,
  • Yonglin Zheng,
  • Miaomiao Zhang,
  • Yu Liu and ,
  • Shikai Xu,
  • Shiwen Zhu,
  • Xiangyu Gao and
  • Zhiquan Huang
  • + 3 authors+ 0 author

15 July 2026

To reveal the influence of pulsed current density on the microstructural evolution and mechanical properties of Mg-Gd-Y-Zn-Zr rare-earth magnesium alloy wires, extruded Mg-10Gd-3.4Y-1.3Zn-0.4Zr alloy wire was selected as the research material. By reg...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
46 Citations
7,436 Views
16 Pages

A 3D Wrist Pulse Signal Acquisition System for Width Information of Pulse Wave

  • Chuanglu Chen,
  • Zhiqiang Li,
  • Yitao Zhang,
  • Shaolong Zhang and ,
  • Jiena Hou and
  • Haiying Zhang
  • + 1 author+ 0 author

18 December 2019

During pulse signal collection, width information of pulse waves is essential for the diagnosis of disease. However, currently used measuring instruments can only detect the amplitude while can’t acquire the width information. This paper propos...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
4 Citations
4,928 Views
22 Pages

Picosecond Pulsed-Periodic High-Peak Power Nd:YAG Laser Operationally Controlled by KTP-Based Pockels Cell

  • Vyacheslav Morozov,
  • Andrey Olenin,
  • Vladimir Tunkin,
  • Dmitry Yakovlev and ,
  • Vladimir Rusov,
  • Alexander Gorchakov and
  • Sergei Doroganov
  • + 2 authors+ 0 author

9 March 2022

Electro-optical modulators are effectively used for ultrafast pulse lasers operation control. The scheme of picosecond pulse-periodic high-peak-power Nd:YAG lasers is composed of an active-passive mode-locked and negative feedback-controlled master o...

  • Article
  • Open Access
1,985 Views
10 Pages

Narrow-Pulse-Width, Straight-Type-Cavity, All-Solid-State Laser at 228.5 nm

  • Weihan Shen,
  • Can Xu,
  • Lixiang Fan,
  • Dongxin Xu and ,
  • Kangxun Sun,
  • Zhibin Zhao,
  • Zaijin Li,
  • Hao Chen,
  • Zhongliang Qiao and
  • Yi Qu
  • + 5 authors+ 0 author

2 December 2024

Deep-ultraviolet (DUV) lasers operating at a wavelength of 228 nm offer distinct advantages in Raman spectroscopy and analysis, demonstrating significant potential in the field of surgical medicine. This paper details the development of a high-repeti...

(This article belongs to the Special Issue Advancements in Lasers: Applications and Future Trends)
  • Article
  • Open Access
6 Citations
1,898 Views
28 Pages

Electro-Thermal Co-Design and Verification of TGV Transmission Structures for High-Power High-Frequency Applications

  • Luming Chen,
  • Zhilin Wei,
  • Shenglin Ma,
  • Yan Chen and ,
  • Yihan Xie,
  • Chunlei Li,
  • Shuwei He and
  • Hai Yuan
  • + 3 authors+ 0 author

16 February 2026

Through Glass Via (TGV) technology has emerged as a promising solution for advanced packaging. While glass offers lower dielectric loss than silicon, its lower thermal conductivity raises concerns about electro-thermal coupling effects in high-power,...

(This article belongs to the Special Issue Microelectronics Assembly and Packaging: Materials and Technologies, 3rd Edition)
  • Article
  • Open Access
5 Citations
3,337 Views
14 Pages

29 May 2020

Nowadays, with the widespread use of High Voltage Direct Current (HVDC) cables in power systems, the measurements of space charges in full-size cables are becoming more relevant. One of the most common methods used for space charge measurements is th...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
4 Citations
4,037 Views
14 Pages

A Novel Multi-Dimensional Composition Method Based on Time Series Similarity for Array Pulse Wave Signals Detecting

  • Hongjie Zou,
  • Yitao Zhang,
  • Jun Zhang,
  • Chuanglu Chen and ,
  • Xingguang Geng,
  • Shaolong Zhang and
  • Haiying Zhang
  • + 2 authors+ 0 author

14 November 2020

Pulse wave signal sensed over the radial artery on the wrist is a crucial physiological indicator in disease diagnosis. The sensor array composed of multiple sensors has the ability to collect abundant pulse wave information. As a result, it has grad...

(This article belongs to the Special Issue Algorithms and Applications of Time Series Analysis)

of 8