Skip to Content

1,207 Results Found

  • Feature Paper
  • Article
  • Open Access
2 Citations
2,789 Views
12 Pages

19 January 2023

The promised prospects of Li–S technology, especially within the energy situation of the 21st century, have sparked a renewed interest from the scientific community in the 2000s. In this context, we present our new vision for the fabrication of...

(This article belongs to the Section D2: Electrochem: Batteries, Fuel Cells, Capacitors)
  • Review
  • Open Access
30 Citations
4,827 Views
26 Pages

27 November 2022

Aqueous zinc-ion batteries (AZIBs) are being intensively developed as potential alternative electrochemical power sources, due to their advantages such as low cost, high safety, abundance of natural zinc resources and appropriate energy density. Amon...

(This article belongs to the Collection Renewable Energy and Energy Storage Systems)
  • Article
  • Open Access
19 Citations
6,678 Views
12 Pages

15 December 2023

To achieve high energy densities with sufficient cycling performance in all-solid-state batteries, the fraction of active material has to be maximized while maintaining ionic and electronic conduction throughout the composite cathode. It is well know...

(This article belongs to the Topic Advances in Energy Storage Materials/Devices and Solid-State Batteries)
  • Article
  • Open Access
5 Citations
2,643 Views
15 Pages

20 May 2022

Triple perovskite has been recently developed for the intermediate temperature solid oxide fuel cell (IT-SOFC). The performance of Nd1.5Ba1.5CoFeMnO9−δ (NBCFM) cathodes for IT-SOFC is investigated in this work. The interfacial polarizatio...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
8 Citations
7,493 Views
22 Pages

Co-Sintering of Li1.3Al0.3Ti1.7(PO4)3 and LiFePO4 in Tape-Casted Composite Cathodes for Oxide Solid-State Batteries

  • Jean Philippe Beaupain,
  • Katja Waetzig,
  • Henry Auer,
  • Nicolas Zapp and ,
  • Kristian Nikolowski,
  • Mareike Partsch,
  • Mihails Kusnezoff and
  • Alexander Michaelis
  • + 3 authors+ 0 author

2 November 2023

Solid-state batteries (SSBs) with Li-ion conductive electrolytes made from polymers, thiophosphates (sulfides) or oxides instead of liquid electrolytes have different challenges in material development and manufacturing. For oxide-based SSBs, the co-...

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
15 Citations
6,115 Views
13 Pages

The Formation of Composite Ti-Al-N Coatings Using Filtered Vacuum Arc Deposition with Separate Cathodes

  • Ivan A. Shulepov,
  • Egor B. Kashkarov,
  • Igor B. Stepanov,
  • Maxim S. Syrtanov and ,
  • Alina N. Sutygina,
  • Ivan Shanenkov,
  • Aleksei Obrosov and
  • Sabine Weiß
  • + 3 authors+ 0 author

12 November 2017

Ti-Al-N coatings were deposited on high-speed steel substrates by filtered vacuum arc deposition (FVAD) during evaporation of aluminum and titanium cathodes. Distribution of elements, phase composition, and mechanical properties of Ti-Al-N coatings w...

  • Article
  • Open Access
10 Citations
4,696 Views
9 Pages

YSZ/LSM Composite Cathode Deposited by Solution Precursor Plasma Spraying

  • Xiaoming Wang,
  • Boen Tang,
  • Penghui Wen,
  • Weiping Dong and ,
  • Linlin Wang and
  • Dongyun Wang
  • + 1 author+ 0 author

28 February 2022

In this paper, solution precursor plasma spraying (SPPS) was employed to prepare a porous YSZ/LSM composite cathode for solid oxide fuel cell (SOFC). The surface morphology and microstructure of the composite cathode deposits were characterized using...

(This article belongs to the Topic Inorganic Thin Film Materials)
  • Article
  • Open Access
6 Citations
7,951 Views
12 Pages

24 October 2013

This paper reports a modeling methodology to predict the effects on the discharge behavior of the cathode composition of a lithium iron phosphate (LFP) battery cell comprising a LFP cathode, a lithium metal anode, and an organic electrolyte. A one-d...

(This article belongs to the Special Issue Li-ion Batteries and Energy Storage Devices)
  • Review
  • Open Access
37 Citations
17,150 Views
23 Pages

15 October 2018

Carbon plays a critical role in improving the electronic conductivity of cathodes in lithium ion batteries. Particularly, the characteristics of carbon and its composite with electrode material strongly affect battery properties, governed by electron...

  • Article
  • Open Access
5 Citations
3,889 Views
10 Pages

Continuous Composition Spread and Electrochemical Studies of Low Cobalt Content Li(Ni,Mn,Co)O2 Cathode Materials

  • JongSeok Jung,
  • Haena Yim,
  • Narendra Singh Parmar,
  • Jae-Seung Lee and
  • Ji-Won Choi

Many scientific efforts have been undertaken toward reducing the Co content in LiMn1/3Ni1/3Co1/3O2 cathode materials for thin-film batteries. In this study, we present cathodes with a wide range of Li(Ni, Mn, Co)O2 compositions to determine the mater...

  • Article
  • Open Access
21 Citations
6,180 Views
14 Pages

Carbonate-Based Lanthanum Strontium Cobalt Ferrite (LSCF)–Samarium-Doped Ceria (SDC) Composite Cathode for Low-Temperature Solid Oxide Fuel Cells

  • Muhammed Ali S.A.,
  • Jarot Raharjo,
  • Mustafa Anwar,
  • Deni Shidqi Khaerudini and ,
  • Andanastuti Muchtar,
  • Luca Spiridigliozzi and
  • Mahendra Rao Somalu
  • + 2 authors+ 0 author

28 May 2020

Perovskite-based composite cathodes, La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF)–Ce0.8Sm0.2O1.9-carbonate (SDCC), were investigated as cathode materials for low-temperature solid-oxide fuel cells. The LSCF was mixed with the SDC–carbonate (SDCC...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
10 Citations
6,400 Views
11 Pages

This study develops a composite cathode material suitable for solid-state Li-ion batteries (SSLIB). The composite cathode consists of LiFePO4 as the active material, Super P and KS-4 carbon materials as the conductive agents, and LiTFSI as the lithiu...

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
24 Citations
5,242 Views
10 Pages

Manipulating of P2/O3 Composite Sodium Layered Oxide Cathode through Ti Substitution and Synthesis Temperature

  • Xiaobai Ma,
  • Hao Guo,
  • Jianxiang Gao,
  • Xufeng Hu and ,
  • Zhengyao Li,
  • Kai Sun and
  • Dongfeng Chen
  • + 2 authors+ 0 author

12 April 2023

P2/O3 composite sodium layered oxide has emerged as a promising cathode for high-performance Na-ion batteries. However, it has been challenging to regulate accurately the phase ratio of P2/O3 composite due to their high compositional diversity, which...

(This article belongs to the Special Issue Nanomaterials for Energy Conversion and Storage)
  • Article
  • Open Access
13 Citations
4,956 Views
17 Pages

25 February 2021

During the manufacture of a composite cathode for lithium-sulfur (Li-S) batteries it is important to realize homogeneous infiltration of a specified amount of sulfur, targeted to be at least 5 mg cm−2 to achieve good battery performance in terms of h...

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2020)
  • Article
  • Open Access
87 Citations
10,831 Views
19 Pages

18 February 2019

The current study investigated the effects of active material, conductive additives, and binder in a composite electrode on battery performance. In addition, the parameters related to cell performance as well as side reactions were integrated in an e...

  • Article
  • Open Access
879 Views
23 Pages

24 May 2026

Quantitative evaluation of the interfacial contact characteristics between the cathode active material (CAM) and solid electrolyte (SE) in all-solid-state battery (ASSB) composite cathodes is essential for improving electrochemical performance. In th...

(This article belongs to the Special Issue Lithium-Ion Batteries: Interface Engineering, Material Innovation and Performance Enhancement)
  • Article
  • Open Access
12 Citations
4,673 Views
13 Pages

Nanocrystalline TiO2/Carbon/Sulfur Composite Cathodes for Lithium–Sulfur Battery

  • Markéta Zukalová,
  • Monika Vinarčíková,
  • Milan Bouša and
  • Ladislav Kavan

20 February 2021

This paper evaluates the influence of the morphology, surface area, and surface modification of carbonaceous additives on the performance of the corresponding cathode in a lithium–sulfur battery. The structure of sulfur composite cathodes with mesopo...

(This article belongs to the Special Issue Applications of Nanomaterials and Nanotechnology in Energy Storage Device)
  • Article
  • Open Access
564 Views
26 Pages

17 July 2026

Electrocoagulation (EC) is a promising technology for hypereutrophic wastewater treatment, yet reactor geometry, electrode passivation, and energy inefficiency remain key limitations. This study developed a graphene oxide–phosphomolybdate (GO–POM) co...

(This article belongs to the Section Wastewater Treatment and Reuse)
  • Article
  • Open Access
6 Citations
2,384 Views
12 Pages

Preparation of Expanded Graphite-VO2 Composite Cathode Material and Performance in Aqueous Zinc-Ion Batteries

  • Jiaye Li,
  • Jing Zhao,
  • Zebin Wang,
  • Huan Liu and ,
  • Qing Wen,
  • Jinling Yin and
  • Guiling Wang
  • + 2 authors+ 0 author

10 June 2024

Due to safety problems caused by the use of organic electrolytes in lithium-ion batteries and the high production cost brought by the limited lithium resources, water-based zinc-ion batteries have become a new research focus in the field of energy st...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
20 Citations
5,777 Views
13 Pages

26 March 2017

LiV3O8/polytriphenylamine composites are synthesized by a chemical oxidative polymerization process and applied as cathode materials for rechargeable lithium batteries (RLB). The structure, morphology, and electrochemical performances of the composit...

  • Article
  • Open Access
20 Citations
3,994 Views
9 Pages

5 January 2023

We have successfully prepared porous carbon from water hyacinth plants using several steps, i.e., carbonization, activation, and calcination processes. Water hyacinth porous carbon is an alternative as a carbon material due to the ease and low cost o...

(This article belongs to the Section Energy Sustainability)
  • Article
  • Open Access
15 Citations
6,444 Views
13 Pages

24 February 2017

Li3V2(PO4)3−xBrx/carbon (x = 0.08, 0.14, 0.20, and 0.26) composites as cathode materials for lithium-ion batteries were prepared through partially substituting PO43− with Br−, via a rheological phase reaction method. The crystal structure and morphol...

  • Article
  • Open Access
1 Citations
1,634 Views
14 Pages

Dual-Strategy Design Based on Polymer–Matrix Composite Cathode and Coated Separator for High-Performance Lithium–Iron Disulfide Batteries

  • Fan Zhang,
  • Qiang Lu,
  • Jiachen Li,
  • Qiongyue Zhang and ,
  • Haotian Yu,
  • Yahao Wang,
  • Jinrui Li,
  • Haodong Ren,
  • Huirong Liang and
  • Xiaogang Han
  • + 6 authors+ 1 author

29 August 2025

Lithium–iron disulfide (Li-FeS2) batteries are plagued by the polysulfide shuttle effect and cathode structural degradation, which significantly hinder their practical application. This study proposes a dual-strategy design that combines a poly...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
15 Citations
3,959 Views
12 Pages

31 December 2021

Na3V2(PO4)3 is regarded as one of the promising cathode materials for next-generation sodium ion batteries, but its undesirable electrochemical performances due to inherently low electrical conductivity have limited its direct use for applications. M...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
215 Views
19 Pages

Electrophoretic Deposition of LiFePO4 Composite Cathodes on Carbon Fibres: Process Behaviour and Electrochemical Performance

  • Stefano Russo,
  • Wilgner Lima da Silva,
  • Francesco Gucci,
  • Peter R. Slater and
  • Marzio Grasso

19 October 2026

Carbon-fibre-supported cathodes are components of multifunctional energy-storage composites, but their manufacture requires coating routes capable of depositing electrochemically active material directly onto fibrous substrates with controllable load...

(This article belongs to the Special Issue Advanced Composite Carbon Fibers)
  • Article
  • Open Access
25 Citations
5,224 Views
13 Pages

One-Pot Synthesis of LiFePO4/N-Doped C Composite Cathodes for Li-ion Batteries

  • Baoquan Zhang,
  • Shuzhong Wang,
  • Lu Liu,
  • Yanhui Li and
  • Jianqiao Yang

6 July 2022

LiFePO4/N-doped C composites with core–shell structures were synthesized by a convenient solvothermal method. Cetyltrimethylammonium bromide (CTAB) and glucose were used as nitrogen and carbon sources, respectively. The growth of LiFePO4 nanocr...

(This article belongs to the Topic Synthesis, Characterization and Performance of Materials for a Sustainable Future)
  • Article
  • Open Access
34 Citations
5,468 Views
13 Pages

Reduced Graphene Oxide Coating LiFePO4 Composite Cathodes for Advanced Lithium-Ion Battery Applications

  • Qingao Zhang,
  • Yu Zhou,
  • Yulong Tong,
  • Yuting Chi and ,
  • Ruhua Liu,
  • Changkai Dai,
  • Zhanqing Li,
  • Zhenli Cui,
  • Yaohua Liang and
  • Yanli Tan
  • + 5 authors+ 0 author

16 December 2023

Recently, the application of LiFePO4 (LFP) batteries in electric vehicles has attracted extensive attention from researchers. This work presents a composite of LFP particles trapped in reduced graphene oxide (rGO) nanosheets obtained through the high...

(This article belongs to the Special Issue Carbon–Multidisciplinary Investigations and Innovative Solutions)
  • Article
  • Open Access
43 Citations
6,300 Views
10 Pages

20 August 2018

In the present study, a novel sulfur/lithium-ion full battery was assembled while using ternary sulfur/polyacrylonitrile/SiO2 (S/PAN/SiO2) composite as the cathode and prelithiated graphite as the anode. For anode, Stabilized Lithium Metal Powder (SL...

  • Article
  • Open Access
314 Views
15 Pages

12 October 2026

Trigger selection underpins thermal runaway (TR) and thermal propagation (TP) testing of lithium-ion batteries, yet its influence on the TR response is rarely quantified, and data for a cell with manganese-based composite cathode (MCC) material are s...

(This article belongs to the Special Issue Control, Modelling, and Management of Batteries: 2nd Edition)
  • Article
  • Open Access
10 Citations
3,775 Views
11 Pages

High-Performance Layered CaV4O9-MXene Composite Cathodes for Aqueous Zinc Ion Batteries

  • Luan Fang,
  • Li Lin,
  • Zhuomei Wu,
  • Tianhao Xu and ,
  • Xuxu Wang,
  • Limin Chang and
  • Ping Nie
  • + 2 authors+ 0 author

Due to their reliability, affordability and high safety, rechargeable aqueous zinc ion batteries (ZIBs) have garnered a lot of attention. Nevertheless, undesirable long-term cycle performance and the inadequate energy density of cathode materials imp...

(This article belongs to the Special Issue Development of Advanced Nanomaterials and Electrolytes for Batteries and Supercapacitors)
  • Article
  • Open Access
10 Citations
4,627 Views
13 Pages

5 December 2022

A simple, rapid, sensitive, accurate, and automatic graphite furnace atomic absorption spectrometry (GFAAS) method for detecting Cd and Pb in cereals is presented. This method enables the simultaneous determination of Cd and Pb in cereals with a pre-...

(This article belongs to the Special Issue Recent Advances in Food and Agricultural Products Analysis)
  • Article
  • Open Access
2 Citations
1,884 Views
8 Pages

Effect of Silicon on the Surface Modification of Al-Cr Powder Cathodes Subjected to Vacuum Arc Treatment

  • Gennady Pribytkov,
  • Victoria Korzhova,
  • Elena Korosteleva and
  • Maksim Krinitcyn

Al-Cr and Al-Cr-Si composite cathodes were obtained by the hot compaction of aluminum, chromium, and silicon powder mixtures. The phase transformations in the surface layer of the Al-Cr-Si composite cathodes subjected to the arc heating were consider...

(This article belongs to the Special Issue Recent Progress in Surface and Interface Properties of Nanostructures)
  • Article
  • Open Access
9 Citations
3,159 Views
10 Pages

11 February 2021

Lithium-sulfur (Li-S) battery is considered one of the possible alternatives for next-generation high energy batteries. However, its practical applications are still facing great challenges because of poor electronic conductivity, large volume change...

(This article belongs to the Special Issue Materials for Residential Electrochemical Energy Storage Systems)
  • Article
  • Open Access
23 Citations
3,754 Views
17 Pages

Analysis of La4Ni3O10±δ-BaCe0.9Y0.1O3-δ Composite Cathodes for Proton Ceramic Fuel Cells

  • Francisco J. A. Loureiro,
  • Devaraj Ramasamy,
  • Vanessa C. D. Graça,
  • Laura I. V. Holz and ,
  • Sergey M. Mikhalev and
  • Duncan P. Fagg
  • + 1 author+ 0 author

10 April 2021

Layered Ruddlesden-Popper (RP) lanthanide nickelates, Lnn+1NinO3n+1 (Ln = La, Pr, and Nd; n = 1, 2, and 3) have generated great interest as potential cathodes for proton conducting fuel cells (PCFCs). The high-order phase (n = 3) is especially intrig...

(This article belongs to the Section Energy Science and Technology)
  • Article
  • Open Access
8 Citations
4,205 Views
13 Pages

Ultrasonic Spray Coating of Carbon Fibers for Composite Cathodes in Structural Batteries

  • Thomas Burns,
  • Liliana DeLatte,
  • Gabriela Roman-Martinez,
  • Kyra Glassey and ,
  • Paul Ziehl,
  • Monirosadat Sadati,
  • Ralph E. White and
  • Paul T. Coman
  • + 3 authors+ 0 author

Structural batteries, also known as “massless batteries”, integrate energy storage directly into load-bearing materials, offering a transformative alternative to traditional Li-ion batteries. Unlike conventional systems that serve only as...

(This article belongs to the Special Issue Feature Papers in Electrochemistry)
  • Article
  • Open Access
24 Citations
5,274 Views
12 Pages

PrBaCo2O6−δ-Ce0.8Sm0.2O1.9 Composite Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells: Stability and Cation Interdiffusion

  • Dmitry Tsvetkov,
  • Nadezhda Tsvetkova,
  • Ivan Ivanov,
  • Dmitry Malyshkin and ,
  • Vladimir Sereda and
  • Andrey Zuev
  • + 1 author+ 0 author

29 January 2019

The single-phase oxide PrBaCo2O6−δ and composites (100 − y)PrBaCo2O6−δ-yCe0.8Sm0.2O1.9 (y = 10–30 wt.%) were investigated as cathode materials for intermediate-temperature solid oxide fuel cells. The chemical compa...

(This article belongs to the Special Issue High-Temperature Electrochemistry of Solid Oxide Materials and Systems)
  • Article
  • Open Access
2 Citations
3,788 Views
15 Pages

Ni-MoO2 Composite Coatings Electrodeposited at Porous Ni Substrate as Efficient Alkaline Water Splitting Cathodes

  • Aleksandar Petričević,
  • Jelena Gojgić,
  • Christian I. Bernäcker,
  • Thomas Rauscher and ,
  • Marjan Bele,
  • Milutin Smiljanić,
  • Nejc Hodnik,
  • Nevenka Elezović,
  • Vladimir D. Jović and
  • Mila N. Krstajić Pajić
  • + 5 authors+ 0 author

13 August 2024

To obtain highly efficient yet easily produced water-splitting cathodes, Ni-MoO2 composite coatings were electrodeposited at a Ni foam substrate with an open-pore structure, pore size of 450 µm, in a Watts-type bath. The concentration of MoO2 p...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
23 Citations
5,097 Views
12 Pages

Biomass-Derived Carbon/Sulfur Composite Cathodes with Multiwalled Carbon Nanotube Coatings for Li-S Batteries

  • Lina Han,
  • Zemin Li,
  • Yang Feng,
  • Lijiang Wang and ,
  • Bowen Li,
  • Zijie Lei,
  • Wenyan Wang and
  • Weiwei Huang
  • + 3 authors+ 0 author

10 January 2022

Lithium sulfur (Li-S) batteries stand out among many new batteries for their high energy density. However, the intermediate charge–discharge product dissolves easily into the electrolyte to produce a shuttle effect, which is a key factor limiti...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
1,418 Views
30 Pages

In sulfide-based all-solid-state battery (ASSB) composite cathodes, incomplete solid–solid contact and tortuous ionic/electronic transport pathways increase internal electrode resistance and complicate the interpretation of apparent impedance r...

(This article belongs to the Special Issue Novel Research on Electrochemical Energy Storage Materials, 2nd Edition)
  • Article
  • Open Access
508 Views
22 Pages

Interfacial Engineering of NCM622 Cathodes by a Li2O–B2O3–Li2SO4 Composite Layer for High-Stability Low-Temperature Li Storage

  • Bin Zhang,
  • Qing Yin,
  • Shouxun Peng,
  • Zeyu Zhao and ,
  • Meiyu Shi,
  • Xiwen Li,
  • Zheng Li,
  • Bin Xiao,
  • Xiuquan Gu and
  • Yanwei Sui
  • + 9 authors+ 4 authors

29 July 2026

Low-temperature operation of lithium-ion batteries (LIBs) is severely limited by sluggish Li+ transport, aggravated interfacial polarization, and structural degradation of layered oxide cathodes. Herein, a multifunctional Li2O-B2O3-Li2SO4 composite c...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Review
  • Open Access
1 Citations
1,310 Views
40 Pages

All-Solid-State Lithium–Sulfur Batteries: Recent Progress, Challenges, and Perspectives

  • Yoonha Hwang,
  • Yeo Jin An,
  • Soohyun Sim,
  • Changhoon Choi and
  • Minjeong Shin

13 June 2026

All-solid-state lithium–sulfur batteries (ASSLSBs) couple the high theoretical energy density of sulfur (2600 Wh kg−1) with the safety and polysulfide-shuttle suppression advantages of solid electrolytes (SEs). In practice, however, slugg...

(This article belongs to the Special Issue Next-Generation Materials for Energy Storage)
  • Article
  • Open Access
7 Citations
3,211 Views
20 Pages

7 March 2023

The double-layer composite electrode has attracted increasing attention in the field of intermediate-temperature solid oxide electrolysis cells (IT-SOEC). To investigate the effects of the cathode diffusion layer (CDL) and cathode functional layer (C...

(This article belongs to the Special Issue New Advancement in Heat and Mass Transfer: Fundamentals and Applications (Volume II))
  • Review
  • Open Access
89 Citations
14,355 Views
34 Pages

Perspectives on Cathodes for Protonic Ceramic Fuel Cells

  • Glenn C. Mather,
  • Daniel Muñoz-Gil,
  • Javier Zamudio-García,
  • José M. Porras-Vázquez and ,
  • David Marrero-López and
  • Domingo Pérez-Coll
  • + 1 author+ 0 author

9 June 2021

Protonic ceramic fuel cells (PCFCs) are promising electrochemical devices for the efficient and clean conversion of hydrogen and low hydrocarbons into electrical energy. Their intermediate operation temperature (500–800 °C) proffers advantages in ter...

(This article belongs to the Section Energy Science and Technology)
  • Article
  • Open Access
5 Citations
3,437 Views
12 Pages

Electrochemical Performance of Graphene-Modulated Sulfur Composite Cathodes Using LiBH4 Electrolyte for All-Solid-State Li-S Battery

  • Tarun Patodia,
  • Mukesh Kumar Gupta,
  • Rini Singh,
  • Takayuki Ichikawa and ,
  • Ankur Jain and
  • Balram Tripathi
  • + 1 author+ 0 author

5 November 2021

All-solid-state Li-S batteries (use of solid electrolyte LiBH4) were prepared using cathodes of a homogeneous mixture of graphene oxide (GO) and reduced graphene oxide (rGO) with sulfur (S) and solid electrolyte lithium borohydride (LiBH4), and their...

(This article belongs to the Section D1: Advanced Energy Materials)
  • Article
  • Open Access
2 Citations
4,217 Views
21 Pages

24 December 2024

Lithium-ion batteries are a promising technology to promote the phase-out of fossil fuel vehicles. Increasing efforts are focused on improving their energy density and safety by replacing current materials with more efficient and safer alternatives....

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
498 Views
20 Pages

26 June 2026

Maintaining a conductive network is essential for achieving high energy density and long-term reliability in lithium-ion batteries. However, its stability is often compromised by structural non-uniformity, and under high-voltage operation, by the oxi...

(This article belongs to the Special Issue Advances in Materials for Electrochemical Energy Applications: 2nd Edition)
  • Article
  • Open Access
17 Citations
4,704 Views
32 Pages

New Carbon Nanofiber Composite Materials Containing Lanthanides and Transition Metals Based on Electrospun Polyacrylonitrile for High Temperature Polymer Electrolyte Membrane Fuel Cell Cathodes

  • Igor I. Ponomarev,
  • Kirill M. Skupov,
  • Olga M. Zhigalina,
  • Alexander V. Naumkin and ,
  • Alexander D. Modestov,
  • Victoria G. Basu,
  • Alena E. Sufiyanova,
  • Dmitry Y. Razorenov and
  • Ivan I. Ponomarev
  • + 4 authors+ 0 author

13 June 2020

Electrospinning of polyacrylonitrile/DMF dopes containing salts of nickel, cobalt, zirconium, cerium, gadolinium, and samarium, makes it possible to obtain precursor nanofiber mats which can be subsequently converted into carbon nanofiber (CNF) compo...

(This article belongs to the Special Issue Polymers for Energy, Electronics and Sensing)
  • Review
  • Open Access
29 Citations
6,434 Views
44 Pages

3 April 2023

Aqueous zinc-ion batteries (AZIBs) and, in particular, Zn//MnO2 rechargeable batteries have attracted great attention due to the abundant natural resources of zinc and manganese, low cost, environmental friendliness, and high operating voltage. Among...

(This article belongs to the Section D1: Advanced Energy Materials)
  • Article
  • Open Access
5 Citations
3,530 Views
11 Pages

A New Graphitic Nitride and Reduced Graphene Oxide-Based Sulfur Cathode for High-Capacity Lithium-Sulfur Cells

  • Artur M. Suzanowicz,
  • Youngjin Lee,
  • Hao Lin,
  • Otavio J. J. Marques and ,
  • Carlo U. Segre and
  • Braja K. Mandal
  • + 1 author+ 0 author

19 January 2022

Lithium-sulfur (Li-S) batteries can provide at least three times higher energy density than lithium-ion (Li-Ion) batteries. However, Li-S batteries suffer from a phenomenon called the polysulfide shuttle (PSS) that prevents the commercialization of t...

(This article belongs to the Section D2: Electrochem: Batteries, Fuel Cells, Capacitors)
  • Article
  • Open Access
9 Citations
4,012 Views
14 Pages

Improvement of La0.8Sr0.2MnO3−δ Cathode Material for Solid Oxide Fuel Cells by Addition of YFe0.5Co0.5O3

  • Michał Mosiałek,
  • Małgorzata Zimowska,
  • Dzmitry Kharytonau,
  • Anna Komenda and ,
  • Miłosz Górski and
  • Marcel Krzan
  • + 1 author+ 0 author

15 January 2022

The high efficiency of solid oxide fuel cells with La0.8Sr0.2MnO3−δ (LSM) cathodes working in the range of 800–1000 °C, rapidly decreases below 800 °C. The goal of this study is to improve the properties of LSM cathodes work...

(This article belongs to the Section Energy Materials)

of 25