Skip to Content

75 Results Found

  • Article
  • Open Access
28 Citations
7,391 Views
10 Pages

30 October 2019

This research analyzes the mechanical properties and fracture behavior of two cold work tool steels: AISI “D2” and “O1”. Tool steels are an economical and efficient solution for manufacturers due to their superior mechanical p...

(This article belongs to the Special Issue Mechanical Properties and Microstructure of Forged Steel)
  • Feature Paper
  • Article
  • Open Access
10 Citations
4,540 Views
19 Pages

Development of a New PM Tool Steel for Optimization of Cold Working of Advanced High-Strength Steels

  • Abdulbaset Mussa,
  • Pavel Krakhmalev,
  • Aydın Şelte and
  • Jens Bergström

3 October 2020

In the present study, Uddeholm Vancron SuperClean cold work tool steel was investigated concerning wear resistance and fatigue strength, using laboratory and semi-industrial tests. The Uddeholm Vancron SuperClean was designed with the help of ThermoC...

(This article belongs to the Special Issue Friction and Wear of Metals)
  • Article
  • Open Access
33 Citations
6,227 Views
21 Pages

Effect of Deep Cryogenic Treatment on Wear Behavior of Cold Work Tool Steel

  • Mahmoud A. Essam,
  • Ahmed Y. Shash,
  • Mohamed Kamal El-Fawakhry,
  • Emad El-Kashif and
  • Hassan Megahed

13 February 2023

Shock resisting cold work tool steel is one of the most applicable steels for several applications such as cutting sheets, chisels, hammers, etc. It has been categorized according to its characteristic properties into different categories as hot and...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
2 Citations
1,365 Views
15 Pages

Effects of the Hydrogen-to-Nitrogen Ratio in Plasma Nitriding on the Surface Properties of Cold Work Tool Steels

  • Kodchaporn Chinnarat,
  • Artit Chingsungnoen,
  • Yasuharu Ohgoe and
  • Toshiyuki Fukahori

24 November 2025

This study systematically investigates the effect of hydrogen flow rate (100, 200, 300, and 400 sccm) on the properties of DC53 steel during a 4 h plasma nitriding process conducted at 400 °C in an asymmetric bipolar pulsed reactor. A comprehensi...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
12 Citations
5,282 Views
7 Pages

6 January 2017

We investigated a new cold-work tool steel with a low Cr content of 6 wt. % which was designed based on thermodynamic calculation to minimize the formation of primary carbide. A smaller particle size and a smaller volume fraction of carbides were obs...

  • Article
  • Open Access
12 Citations
2,696 Views
17 Pages

A Comparative Study of the As-Built Microstructure of a Cold-Work Tool Steel Produced by Laser and Electron-Beam Powder-Bed Fusion

  • Mikael Åsberg,
  • Fengxiang Lin,
  • Patrik Karlsson,
  • Christos Oikonomou and ,
  • Emil Strandh,
  • Markus Uhlirsch and
  • Pavel Krakhmalev
  • + 2 authors+ 0 author

16 August 2024

A high-alloy (Cr-Mo-V) cold-work tool steel was manufactured by laser powder-bed fusion (PBF-LB) without preheating and by electron-beam powder-bed fusion (PBF-EB) with the build temperature set at 850 °C. The solidification rates, cooling, and t...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
6 Citations
1,964 Views
23 Pages

Hierarchical Microstructure–Mechanical Property Correlations in Superior Strength 5 wt% Cr Cold-Work Tool Steel Manufactured by Direct Energy Deposition

  • Jung-Hyun Park,
  • Young-Kyun Kim,
  • Jin-Young Kim,
  • Hyo-Yun Jung and ,
  • Sung-Jin Park and
  • Kee-Ahn Lee
  • + 1 author+ 0 author

1 July 2025

The direct energy deposition (DED) metal additive manufacturing process enables rapid deposition and repair, providing an efficient approach to producing durable tool steel components. Here, 5 wt% Cr cold-work tool steel (Caldie) was developed by red...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
3 Citations
2,947 Views
18 Pages

Full Density Powder Metallurgical Cold Work Tool Steel through Nitrogen Sintering and Capsule-Free Hot Isostatic Pressing

  • Anok Babu Nagaram,
  • Giulio Maistro,
  • Erik Adolfsson,
  • Yu Cao and ,
  • Eduard Hryha and
  • Lars Nyborg
  • + 1 author+ 0 author

12 August 2024

Vanadis 4E (V4E) is a powder metallurgical cold work tool steel predominantly used in application with demand for wear resistance, high hardness, and toughness. It is of interest to have a processing route that enables full density starting from clea...

(This article belongs to the Special Issue Powder Metallurgy of Metallic Materials)
  • Article
  • Open Access
14 Citations
4,559 Views
12 Pages

Microstructural and Mechanical Evaluation of a Cr-Mo-V Cold-Work Tool Steel Produced via Electron Beam Melting (EBM)

  • Carlos Alberto Botero,
  • Aydın Şelte,
  • Markus Ramsperger,
  • Giulio Maistro and ,
  • Andrey Koptyug,
  • Mikael Bäckström,
  • William Sjöström and
  • Lars-Erik Rännar
  • + 3 authors+ 0 author

31 May 2021

In this work, a highly alloyed cold work tool steel, Uddeholm Vanadis 4 Extra, was manufactured via the electron beam melting (EBM) technique. The corresponding material microstructure and carbide precipitation behavior as well as the microstructural...

(This article belongs to the Special Issue Additive Manufacturing of Alloys Using Electron Beam Powder Bed Fusion)
  • Article
  • Open Access
937 Views
27 Pages

Tensile and Fatigue Performance of Cold-Work Tool Steels for Adjustable Forming Tools

  • Kaarel Siimut,
  • Kasper Mygind Madsen,
  • Ermanno Ceron and
  • Chris Valentin Nielsen

16 January 2026

Forming tools adjustable by tensile elastic deformations offer opportunities for improved process control and reduced wear in high-volume metal forming processes such as ironing. However, the lack of tensile and fatigue data for hardened cold-work to...

(This article belongs to the Special Issue Fatigue and Fracture Behavior of Engineering Materials)
  • Article
  • Open Access
8 Citations
2,376 Views
11 Pages

Influence of Laser Texturing and Coating on the Tribological Properties of the Tool Steels Properties

  • Jana Moravčíková,
  • Roman Moravčík,
  • Martin Sahul and
  • Martin Necpal

The article is aimed at identifying the influence of laser texturing and subsequent coating with a hard, wear-resistant coating AlCrSiN (nACRo®) on selected tribological properties of the analyzed tool steels for cold work, produced by convention...

(This article belongs to the Special Issue Precision Manufacturing and Machine Tools)
  • Article
  • Open Access
3 Citations
3,278 Views
11 Pages

Diffusion Bonding of High-Alloyed Tool Steels with Maraging and Precipitation Hardening Steels

  • Michael Göbl,
  • Harald Eder,
  • Aude Prestl,
  • Ingo Siller and
  • Ronald Schnitzer

2 December 2020

Steel composites for application as protective plates were produced via diffusion bonding. Cold work tool steels were combined with a precipitation hardening steel or a maraging steel using a deformation dilatometer and a vacuum furnace at 1150 °...

  • Article
  • Open Access
1,261 Views
19 Pages

23 July 2025

In this study, deep cryogenic treatment (DCT) was applied to cold work tool steels with different vanadium weights (Vanadis 4 and Vanadis 10) for 12, 24 and 36 h, and the changes in their mechanical properties and microstructures were examined. Compr...

  • Article
  • Open Access
2 Citations
2,228 Views
15 Pages

1 October 2024

In this study, the effect of the cold plastic deformation of a Bridgman anvil at room temperature on the hardness and wear resistance of X160CrMoV12 steel was investigated by utilizing the hardness test, X-ray diffraction (XRD), abrasive emery wear (...

(This article belongs to the Special Issue Recent Insights into Mechanical Properties of Metallic Alloys)
  • Article
  • Open Access
26 Citations
9,671 Views
16 Pages

Microstructure and Mechanical Properties of Thixowelded AISI D2 Tool Steel

  • M. N. Mohammed,
  • M. Z. Omar,
  • Salah Al-Zubaidi,
  • K. S. Alhawari and
  • M. A. Abdelgnei

4 May 2018

Rigid perpetual joining of materials is one of the main demands in most of the manufacturing and assembling industries. AISI D2 cold work tool steels is commonly known as non-weldable metal that a high quality joint of this kind of material can be ha...

(This article belongs to the Special Issue Semi-Solid Processing of Alloys and Composites)
  • Article
  • Open Access
2 Citations
1,966 Views
17 Pages

Enhanced Durability of Wood Cutting Tools through Thermal Cycling

  • Hamza Sofiane Meddas,
  • Muftah Zorgani,
  • Majid Heidari,
  • Mousa Javidani and ,
  • Tom Levasseur and
  • Mohammad Jahazi
  • + 1 author+ 0 author

16 October 2024

This study investigates the impact of multi-step austenitization heat treatment on the in-service life of modified AISI A8 cold work tool steel knives used in wood cutting. The knives were subjected to two treatment methods: single quenching and doub...

(This article belongs to the Special Issue Enhancing In-Use Properties of Advanced Steels)
  • Article
  • Open Access
20 Citations
5,303 Views
11 Pages

2 September 2022

In this research, Böhler K340 cold work tool steel was subjected to three different heat treatment protocols, conventional heat treatment (CHT), shallow cryogenic treatment (SCT), and deep cryogenic treatment (DCT). The study compares the effect...

(This article belongs to the Special Issue Mechanical, Corrosive and Tribological Degradation of Metal Coatings and Modified Metallic Surfaces)
  • Article
  • Open Access
9 Citations
3,131 Views
9 Pages

5 December 2020

The aim of this research was to investigate the influence of laser surface texturing sequence on the fatigue properties of cold-work tool steel. For this reason, polished hourglass-type test specimens made from cold-work tool steel (K890) were surfac...

(This article belongs to the Section Metal Failure Analysis)
  • Article
  • Open Access
2 Citations
841 Views
13 Pages

Effect of CeO2 Addition on the Microstructure and Properties of Laser-Prepared WC/Ni60 Composite Coatings for Cold Work Tool Steel

  • Weiwei Ma,
  • Wenqian Zhou,
  • Yamin Li,
  • Yali Zhao and ,
  • Hao Xue,
  • Bo Gao and
  • Yufu Sun
  • + 2 authors+ 0 author

1 November 2025

Nickel–tungsten carbide (Ni/WC) multi-pass fused cladding layers with different cerium (IV) oxide (CeO2) contents were applied to Cr12MoV cold work tool steel surfaces using the coaxial powder feeding method for laser cladding. Scanning electro...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
21 Citations
2,244 Views
45 Pages

Optimization of End Mill Geometry for Machining 1.2379 Cold-Work Tool Steel Through Hybrid RSM-ANN-GA Coupled FEA Approach

  • Tolga Berkay Şirin,
  • Oguzhan Der,
  • Hasan Kuş,
  • Çağla Gökbulut Avdan and ,
  • Semih Yüksel,
  • Ayhan Etyemez and
  • Mustafa Ay
  • + 2 authors+ 0 author

21 December 2025

Optimizing end mill geometry is critical for improving performance and reducing costs in the high-volume manufacturing of tools, dies and molds. This study demonstrates a successful optimization framework for solid end mills machining 1.2379 cold-wor...

(This article belongs to the Section Material Processing Technology)
  • Feature Paper
  • Article
  • Open Access
15 Citations
2,798 Views
21 Pages

7 April 2024

The ability of cryogenic treatment to improve tool steel performance is well established; however, the selection of optimal heat treatment is pivotal for cost reduction and extended tool life. This investigation delves into the influence of distinct...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
5 Citations
4,208 Views
26 Pages

Improvement of Seizure Resistance in Ironing of Aluminum Alloy Sheets and Stainless Steel Cups by Utilizing Laser Textured Die Having Lubricant Pockets

  • Yohei Abe,
  • Mika Sugiura,
  • Takumi Ando,
  • Peerapong Kumkhuntod and ,
  • Kamthon Septham,
  • Witthaya Daodon and
  • Ken-ichiro Mori
  • + 2 authors+ 0 author

19 April 2023

Seizure during ironing negatively affects the quality of parts and die life. To prevent seizures, lubrication has to be improved. In this study, laser-textured dies with lubricant pockets were utilized to improve seizure resistance in the ironing of...

(This article belongs to the Section Structural Integrity of Metals)
  • Article
  • Open Access
8 Citations
2,215 Views
17 Pages

3 November 2024

This work concerns an experimental investigation dealing with the machinability of 60CrMoV18-5 cold-work tool steel under dry CNC hard turning conditions using a CBN cutting insert. A response surface experiment based on the central composite design...

(This article belongs to the Special Issue Recent Advances in Surface Integrity with Machining and Milling)
  • Article
  • Open Access
5 Citations
4,063 Views
12 Pages

Micro-Texture Analyses of a Cold-Work Tool Steel for Additive Manufacturing

  • Jun-Yun Kang,
  • Jaecheol Yun,
  • Byunghwan Kim,
  • Jungho Choe and ,
  • Sangsun Yang,
  • Seong-Jun Park,
  • Ji-Hun Yu and
  • Yong-Jin Kim
  • + 3 authors+ 0 author

9 February 2020

Small objects of an alloy tool steel were built by selective laser melting at different scan speeds, and their microstructures were analyzed using electron backscatter diffraction (EBSD). To present an explicit correlation with the local thermal cycl...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Metals and Alloys)
  • Article
  • Open Access
5 Citations
4,080 Views
11 Pages

21 May 2020

A novel high C high Si carbide free bainitic steel was developed for the production of cold work tools, knives, and rolls, requiring high hardness, toughness, as well as abrasive/adhesive wear resistance and resistance to galling at low costs. The st...

(This article belongs to the Special Issue Friction and Wear of Metals)
  • Article
  • Open Access
8 Citations
3,695 Views
17 Pages

A Machine Learning Approach for Modelling Cold-Rolling Curves for Various Stainless Steels

  • Julia Contreras-Fortes,
  • M. Inmaculada Rodríguez-García,
  • David L. Sales,
  • Rocío Sánchez-Miranda and ,
  • Juan F. Almagro and
  • Ignacio Turias
  • + 1 author+ 0 author

27 December 2023

Stainless steel is a cold-work-hardened material. The degree and mechanism of hardening depend on the grade and family of the steel. This characteristic has a direct effect on the mechanical behaviour of stainless steel when it is cold-formed. Since...

(This article belongs to the Special Issue Machine Learning Techniques in Materials Science and Engineering)
  • Article
  • Open Access
7 Citations
3,266 Views
18 Pages

Preliminary Studies of the Durability of Tools Used to Form Ceramic Tiles Made of Hardox 600 and NC11LV Steel

  • Jan Marzec,
  • Marek Hawryluk,
  • Marcin Rychlik,
  • Marzena M. Lachowicz and
  • Maciej Suliga

7 March 2021

The study performs a comparative analysis of the wear of tools made of two wear-resistant materials: steel Hardox 600 and NC11LV, used in the process of forming a band for roofing tiles. The analyses were to allow the assessment of the possibility of...

(This article belongs to the Special Issue Tribology: Friction and Wear of Engineering Materials)
  • Proceeding Paper
  • Open Access
2,085 Views
11 Pages

Surface Topography and Grain Morphology of Nanolayer TiAlN/TiSIN Coating Governed by Substrate Material and Rotation during Deposition

  • Vladimir Terek,
  • Aleksandar Miletić,
  • Lazar Kovačević,
  • Dragan Kukuruzović and ,
  • Branko Škorić,
  • Peter Panjan and
  • Pal Terek
  • + 2 authors+ 0 author

Nanolayer TiAlN/TiSiN coating is one of the most advanced contemporary protective coatings. It has been applied for protection of machining tools, forming tools, and die casting tools. However, due to its versatile properties, there is a high potenti...

(This article belongs to the Proceedings of 2nd Coatings and Interfaces Web Conference (CIWC-2 2020))
  • Article
  • Open Access
1 Citations
1,895 Views
18 Pages

Maskless Electrochemical Texturing (MECT) Applied to Skin-Pass Cold Rolling

  • Paulo L. Monteiro,
  • Wilian Labiapari,
  • Washington M. Da Silva,
  • Cristiano de Azevedo Celente and
  • Henara Lillian Costa

The surface topography of the rolls used in skin-pass cold rolling determines the surface finish of rolled sheets. In this sense, work rolls can be intentionally textured to produce certain topographical features on the final sheet surface. The maskl...

  • Article
  • Open Access
17 Citations
3,110 Views
20 Pages

Tribocorrosion and Abrasive Wear Test of 22MnCrB5 Hot-Formed Steel

  • Dariusz Ulbrich,
  • Arkadiusz Stachowiak,
  • Jakub Kowalczyk,
  • Daniel Wieczorek and
  • Waldemar Matysiak

30 May 2022

The article presents the results of research on abrasive and tribocorrosion wear of boron steel. This type of steel is used in the automotive and agricultural industries for the production of tools working in soil. The main goal of the article is the...

(This article belongs to the Special Issue Surface Engineering & Coating Technologies for Corrosion and Tribocorrosion Resistance)
  • Article
  • Open Access
8 Citations
6,435 Views
18 Pages

Die Material Selection Criteria for Aluminum Hot Stamping

  • Maider Muro,
  • Ines Aseguinolaza and
  • Garikoitz Artola

The aim of this work is to develop a die material selection criterion for aluminum hot stamping applications. The criterion has been based on the back-to-back comparison of a set of reciprocating friction and wear tests. Three representatives belongi...

  • Review
  • Open Access
46 Citations
9,348 Views
78 Pages

23 January 2024

Conventional heat treatment is not capable of converting a sufficient amount of retained austenite into martensite in high-carbon or high-carbon and high-alloyed iron alloys. Cryogenic treatment induces the following alterations in the microstructure...

(This article belongs to the Special Issue Physical Metallurgy of Metals and Alloys II)
  • Article
  • Open Access
18 Citations
5,525 Views
11 Pages

Influence of Cryogenic Treatment on Wear Resistance and Microstructure of AISI A8 Tool Steel

  • Pello Jimbert,
  • Maider Iturrondobeitia,
  • Julen Ibarretxe and
  • Roberto Fernandez-Martinez

7 December 2018

The effects of deep cryogenic treatment (DCT) on the wear behavior of different tool steels have been widely reported in the scientific literature with uneven results. Some tool steels show a significant improvement in their wear resistance when they...

  • Article
  • Open Access
22 Citations
6,986 Views
16 Pages

17 April 2019

In this thesis, the results of an experimental analysis of blanking angled hooks with a punch of a sloping face in a thin steel sheet with a hardness of 55 HRC are presented. The blanking punch was made of K340 cold-work tool steel. Tests were carrie...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
14 Citations
7,213 Views
18 Pages

Effect of Lubrication and Forging Load on Surface Roughness, Residual Stress, and Deformation of Cold Forging Tools

  • Nuwan Karunathilaka,
  • Naoya Tada,
  • Takeshi Uemori,
  • Ryota Hanamitsu and ,
  • Masahiro Fujii,
  • Yuya Omiya and
  • Masahiro Kawano
  • + 2 authors+ 0 author

12 July 2019

Cold forging is a metal forming that which uses localized compressive force at room temperature. During the cold forging process, the tool is subjected to extremely high loads and abrasive wear. Lubrication plays an important role in cold forging to...

  • Proceeding Paper
  • Open Access
61 Views
9 Pages

3 November 2026

This study investigates the hardness characteristics of various cold- and hot-formed sheet materials, with particular emphasis on the local material changes induced by different cutting technologies. Although work hardening during cold forming is wel...

(This article belongs to the Proceedings of The Sustainable Mobility and Transportation Symposium 2026)
  • Article
  • Open Access
15 Citations
4,925 Views
11 Pages

Manufacturing of Tool Steels by PBF-EB

  • Alexander Kirchner,
  • Burghardt Klöden,
  • Marie Franke-Jurisch,
  • Luis Inarra Rauh-Hain and
  • Thomas Weißgärber

14 October 2021

Additive manufacturing (AM) of metals is stimulating the tool making industry. Moreover, besides the production of lost forms, AM processes are now being used to directly generate tools, molds or parts, leading to massive time savings. In the case of...

(This article belongs to the Special Issue Advances in Powder Metallurgy)
  • Article
  • Open Access
35 Citations
6,821 Views
17 Pages

24 April 2019

Tool steel play a vital role in modern manufacturing industries due to its excellent properties. AISI D3 is a cold work tool steel which possess high strength, more hardenability and good wear resistance properties. It has a wide variety of applicati...

(This article belongs to the Special Issue Machining—Recent Advances, Applications and Challenges)
  • Feature Paper
  • Article
  • Open Access
4 Citations
878 Views
11 Pages

Electrochemical Corrosion Behavior of Cold-Sprayed Cr2AlC Coating on H13 Steel in 3.5 wt.% NaCl Solution

  • Xuejin Zhang,
  • Shibo Li,
  • Weiwei Zhang,
  • Shengshu Zuo and ,
  • Yixiong Zhang and
  • Yage Meng
  • + 1 author+ 0 author

13 March 2026

A cold-sprayed Cr2AlC coating was deposited on an H13 tool steel substrate, and the electrochemical corrosion behavior in 3.5 wt.% NaCl solution was experimentally investigated. Electrochemical tests, including open circuit potential and potentiodyna...

(This article belongs to the Section Functional Polymer Coatings and Films)
  • Article
  • Open Access
16 Citations
5,551 Views
15 Pages

A Newly Designed High-Strength Tool Steel with High Wear and Corrosion Resistance

  • Josephine Zeisig,
  • Viktoriia Shtefan,
  • Lars Giebeler,
  • Uta Kühn and ,
  • Annett Gebert and
  • Julia Kristin Hufenbach
  • + 1 author+ 0 author

26 February 2023

In this study, a newly developed high-strength cast Fe81Cr15V3C1 (wt%) steel with a high resistance against dry abrasion and chloride-induced pitting corrosion is presented. The alloy was synthesized through a special casting process that yielded hig...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Steels - Volume II)
  • Article
  • Open Access
34 Citations
3,867 Views
15 Pages

Tribological Behavior of AlCrSiN-Coated Tool Steel K340 Versus Popular Tool Steel Grades

  • Kazimierz Drozd,
  • Mariusz Walczak,
  • Mirosław Szala and
  • Kamil Gancarczyk

31 October 2020

The tribological performance of metalwork steel tools is of vital importance in both cold and hot working processes. One solution for improving metal tool life is the application of coatings. This paper investigates the differences in quantitative we...

(This article belongs to the Special Issue Friction and Wear of Engineering Materials )
  • Article
  • Open Access
5 Citations
5,319 Views
21 Pages

25 May 2022

The present study investigates the effect of two heat treatments on the microstructure, the tensile and the fatigue properties of a powder metallurgy tool steel that has undergone two heat treatments: quenching and multiple tempering (conventional fo...

(This article belongs to the Special Issue Heat Treatment Process and Application of High-Strength Steel)
  • Article
  • Open Access
4 Citations
6,444 Views
18 Pages

Microstructural and Mechanical Characterization of Ledeburitic AISI D2 Cold-Work Tool Steel in Semisolid Zones via Direct Partial Remelting Process

  • M. N. Mohammed,
  • M. Z. Omar,
  • Adnan Naji Jameel Al-Tamimi,
  • Hakim S. Sultan and ,
  • Luay Hashem Abbud,
  • Salah Al-Zubaidi,
  • Oday I. Abdullah and
  • M. Abdulrazaq
  • + 3 authors+ 0 author

The success of the thixoforming process largely depends on the created microstructure, which must be globular in the liquid phase. The solid–liquid structural changes that occur on as-annealed D2 tool steel when it is subjected to the so-called...

  • Article
  • Open Access
6 Citations
1,930 Views
25 Pages

Analysis of Influence of Coating Type on Friction Behaviour and Surface Topography of DC04/1.0338 Steel Sheet in Bending Under Tension Friction Test

  • Tomasz Trzepieciński,
  • Krzysztof Szwajka,
  • Marek Szewczyk,
  • Joanna Zielińska-Szwajka and ,
  • Marek Barlak,
  • Katarzyna Nowakowska-Langier and
  • Sebastian Okrasa
  • + 2 authors+ 0 author

19 November 2024

The working conditions of tools during plastic working operations are determined by, among other things, temperature, loads, loading method, and processing speed. In sheet metal forming processes, additionally, lubricant and tool surface roughness pl...

(This article belongs to the Section Thin Films and Interfaces)
  • Review
  • Open Access
37 Citations
11,200 Views
45 Pages

10 March 2021

The journey of production tools in cold working, hot working, and injection molding from rapid tooling to additive manufacturing (AM) by laser-based powder bed fusion (L-PBF) is described. The current machines and their configurations, tool steel pow...

(This article belongs to the Special Issue Metal Additive Manufacturing – State of the Art 2020)
  • Article
  • Open Access
10 Citations
4,151 Views
10 Pages

Magnetic and Thermoelectric Detection of Sigma Phase in 2507 Duplex Stainless Steel

  • István Mészáros,
  • Bálint Bögre and
  • Péter János Szabó

10 April 2022

Duplex stainless steel has significantly broadened the range of applications of stainless steel. They have a dual-phase microstructure containing ferrite and austenite at approximately a 50–50% phase ratio. Their corrosion resistance is much be...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
3 Citations
2,740 Views
18 Pages

Influence of Different Alloying Strategies on the Mechanical Behavior of Tool Steel Produced by Laser-Powder Bed Fusion

  • Abootorab Baqerzadeh Chehreh,
  • Anna Strauch,
  • Felix Großwendt,
  • Arne Röttger and ,
  • Rainer Fechte-Heinen,
  • Werner Theisen and
  • Frank Walther
  • + 2 authors+ 0 author

17 June 2021

Additive manufacturing is a high-potential technique that allows the production of components with almost no limitation in complexity. However, one of the main factors that still limits the laser-based additive manufacturing is a lack of processable...

(This article belongs to the Special Issue Advances in Metal Additive Manufacturing)
  • Article
  • Open Access
3 Citations
2,649 Views
14 Pages

A Newly Developed Easily Sinterable Low-Alloy Steel Powder

  • Dorota Tyrala,
  • Janusz Konstanty and
  • Izabela Kalemba-Rec

15 January 2021

The work presents a possibility of fabrication of inexpensive iron-based powders intended to form the matrix in sintered diamond-impregnated tool components. In this study, a finely dispersed, pre-alloyed steel powder, containing over 95 wt.% Fe, has...

  • Article
  • Open Access
9 Citations
4,676 Views
19 Pages

12 September 2019

In this paper, the modelling of a cutting process of a cold-rolled steel sheet using a symmetrical cutting tool is presented. The fast-changing nonlinear dynamic cutting process was elaborated by means of the finite element method and the computer sy...

(This article belongs to the Special Issue Advances in Materials Processing)
  • Article
  • Open Access
3 Citations
2,717 Views
11 Pages

A Study on Tooth Wear Mechanisms During the Bandsawing of Cr12MoV with a Bimetal Bandsaw Blade

  • Yuzhen Jia,
  • Jigang Wu,
  • Yuqiang Chen,
  • Bing Chen and ,
  • Guoyue Liu and
  • Zhiyong Ouyang
  • + 1 author+ 0 author

17 October 2024

Bandsaw blades are typical band-shaped cutting tools that are characterized by their low stiffness and micro-level cutting depth, resulting in distinct wear mechanisms compared to rigid cutting tools. In this study, the wear curve and wear mechanisms...

(This article belongs to the Special Issue Modern Technologies in the Manufacturing of Metal Matrix Composites)

of 2