Skip to Content

86 Results Found

  • Article
  • Open Access
15 Citations
3,781 Views
10 Pages

Influence of Surface Preparation and Heat Treatment on Mechanical Behavior of Hybrid Aluminum Parts Manufactured by a Combination of Laser Powder Bed Fusion and Conventional Manufacturing Processes

  • Alessio Tommasi,
  • Nathalie Maillol,
  • Andrea Bertinetti,
  • Pavel Penchev and ,
  • Julien Bajolet,
  • Flavia Gili,
  • Daniele Pullini and
  • David Busquets Mataix
  • + 3 authors+ 0 author

23 March 2021

Today, in industry, laser-based additive manufacturing (LAM) is used to produce high-value parts of very complex designs that are not manufacturable by conventional technologies; this process’ low production throughput and high cost prevent it from b...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
12 Citations
3,926 Views
25 Pages

16 May 2021

This article presents the analysis of the deformability, structure and properties of the AZ61 cast magnesium alloy on the example of a new forging process of aircraft mount forgings. It was assumed that their production process would be based on drop...

(This article belongs to the Special Issue Hot Deformation and Microstructure Evolution of Metallic Materials)
  • Article
  • Open Access
3 Citations
2,347 Views
21 Pages

25 November 2024

This study explored how post-casting heat treatment and forging affected the tribological and microstructural characteristics of 0.20% beryllium (Be)-added CuAl10Ni5Fe4 alloys. The heat-treated CuAl10Ni5Fe4 microstructure exhibits a copper-rich &alph...

  • Article
  • Open Access
1,087 Views
15 Pages

Unveiling the Microstructure Evolution Mechanism of A356 Aluminum Alloy During Squeeze Casting Torsional Formation

  • Zhenhu Wang,
  • Biwu Zhu,
  • Heng Li,
  • Xiao Liu and ,
  • Guoqiang Chen,
  • Shengkai Xiong,
  • Wenhui Liu,
  • Ganlin Qin,
  • Congchang Xu and
  • Luoxing Li
  • + 5 authors+ 0 author

19 September 2025

In this study, a novel casting–forging hybrid forming technique, introducing torsional shear during squeeze casting, was investigated. This approach enhances the forming efficiency and refines the grain size. Using a finite element method coupl...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Communication
  • Open Access
284 Views
10 Pages

18 September 2026

Minor alloying elements play critical roles in the microstructural evolution and mechanical properties of wrought superalloys. The wrought GH3230 Ni-based superalloys with boron (B) contents ranging from 0.0018 to 0.0088 wt.% were prepared by a casti...

(This article belongs to the Special Issue Advanced Manufacturing and Processing Technology for Metallic Materials)
  • Article
  • Open Access
6 Citations
2,894 Views
20 Pages

29 April 2023

This article discusses a new technology of forming connector forgings from ZK60 magnesium alloy preforms by die forging on a screw press. The purpose of the study was to evaluate the feasibility of using preforms cast from the ZK60 magnesium alloy to...

(This article belongs to the Special Issue Advanced Manufacturing Processes of Metal Forming)
  • Article
  • Open Access
4 Citations
5,638 Views
27 Pages

3 April 2023

This article presents a new technology for forming automotive connecting rod forgings by means of die forging from cast performs from EN AB-71100 (EN AB-AlZn10Si8Mg) aluminum alloy. A premise was made that the production process would be carried out...

(This article belongs to the Special Issue Advanced Manufacturing Processes of Metal Forming)
  • Article
  • Open Access
4 Citations
2,778 Views
11 Pages

Investigation of the Technological Possibility of Manufacturing Volumetric Shaped Ductile Cast Iron Products in Open Dies

  • Vladimir Galkin,
  • Andrey Kurkin,
  • Gennady Gavrilov,
  • Ilya Kulikov and
  • Evgeny Bazhenov

28 December 2022

Information about the technological possibility of stamping in open dies, round-shaped forgings made of ductile cast iron, is outlined herein. Cast iron’s propensity for plastic deformation under complex loading conditions is analyzed from the...

(This article belongs to the Special Issue Microstructure Engineering of Metals and Alloys)
  • Article
  • Open Access
16 Citations
3,978 Views
16 Pages

A Method for Comparing the Fatigue Performance of Forged AZ80 Magnesium

  • Andrew Gryguć,
  • Seyed Behzad Behravesh,
  • Hamid Jahed,
  • Mary Wells and ,
  • Bruce Williams,
  • Rudy Gruber,
  • Alex Duquette,
  • Tom Sparrow,
  • Jim Prsa and
  • Xuming Su
  • + 5 authors+ 0 author

16 August 2021

A closed die forging process was developed to successfully forge an automotive suspension component from AZ80 Mg at a variety of different forging temperatures (300 °C, 450 °C). The properties of the forged component were compared and contrasted with...

(This article belongs to the Special Issue Fatigue and Fracture of Mg Alloys)
  • Review
  • Open Access
103 Citations
12,425 Views
61 Pages

Mg-Alloys for Forging Applications—A Review

  • Nikolaus P. Papenberg,
  • Stefan Gneiger,
  • Irmgard Weißensteiner,
  • Peter J. Uggowitzer and
  • Stefan Pogatscher

22 February 2020

Interest in magnesium alloys and their applications has risen in recent years. This trend is mainly evident in casting applications, but wrought alloys are also increasingly coming into focus. Among the most common forming processes, forging is a pro...

(This article belongs to the Collection Alloy and Process Development of Light Metals)
  • Article
  • Open Access
388 Views
24 Pages

Cost-Effective Manufacturing of Ti-6Al-4V Filler Wire from As-Cast Ingot via Processing Map-Guided Design for Wire Arc Additive Manufacturing

  • Anoop Kumar Maurya,
  • Jong-Taek Yeom,
  • Jae H. Kim,
  • Junha Yang and ,
  • Chan Hee Park,
  • Jae-Keun Hong and
  • Nagireddy Gari Subba Reddy
  • + 2 authors+ 0 author

29 August 2026

Wire and arc additive manufacturing (WAAM) is a cost-efficient technology for large-scale production; however, the high cost of Ti-6Al-4V filler wire, primarily associated with conventional billet-based thermomechanical processing, remains a critical...

(This article belongs to the Special Issue Advanced Manufacturing and Processing Technology for Metallic Materials)
  • Article
  • Open Access
2 Citations
2,490 Views
18 Pages

15 July 2025

The weight reduction is a key objective in modern engineering, particularly in the automotive industry, to enhance vehicle performance and reduce the carbon footprint. In this context aluminum alloys are widely used in structural automotive applicati...

(This article belongs to the Special Issue Advances in Lightweight Alloys, 2nd Edition)
  • Article
  • Open Access
15 Citations
6,731 Views
10 Pages

Effect of Al 6061 Alloy Compositions on Mechanical Properties of the Automotive Steering Knuckle Made by Novel Casting Process

  • Gyu Tae Jeon,
  • Ki Young Kim,
  • Jung-Hwa Moon,
  • Chul Lee and ,
  • Whi-Jun Kim and
  • Suk Jun Kim
  • + 1 author+ 0 author

20 October 2018

This study demonstrates the feasibility of a novel casting process called tailored additive casting (TAC). The TAC process involves injecting the melt several times to fabricate a single component, with a few seconds of holding between successive inj...

(This article belongs to the Special Issue Processing-Structure-Property Relationships in Metals)
  • Article
  • Open Access
10 Citations
8,049 Views
18 Pages

17 January 2023

The hot forging process brings significant advantages in terms of improved mechanical properties of the part compared with other processes, such as casting or machining. The metal flow in the forging process leads to texture modifications and can be...

(This article belongs to the Special Issue Analysis and Design of Metal Forming Processes II)
  • Article
  • Open Access
9 Citations
3,826 Views
17 Pages

Analysis of Microstructure Evolution of Co-Cr-Mo Alloy during Isothermal Forging

  • Yury V. Gamin,
  • Alexander V. Skugorev,
  • Mukhamed M. Karashaev,
  • Tatiana Y. Kin and ,
  • Sergei P. Galkin,
  • Abdullah Mahmoud Alhaj Ali and
  • Vladimir V. Cheverikin
  • + 2 authors+ 0 author

12 September 2023

The article analyzes the microstructure evolution of Co-Cr-Mo alloy during isothermal forging. The process of isothermal forging can be a technological solution to produce a semi-finished product for subsequent deformation processing and obtain a hig...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Editorial
  • Open Access
6 Citations
3,689 Views
4 Pages

Recent Advances in Cast Irons

  • Annalisa Fortini and
  • Chiara Soffritti

19 May 2023

Cast irons are widely used in industry due to their excellent castability, allowing for the production of near-net shape components with complex geometries without the need for additional forging or machining processes [...]

(This article belongs to the Special Issue Recent Advances in Cast Irons)
  • Editorial
  • Open Access
3,303 Views
3 Pages

26 January 2022

Metal-processing operations, including casting, forging, forming, rolling, drawing, welding, machining and cutting, have provided the backbone to heavy industry and, as such, have been some of the principal drivers in the industrialization and manufa...

(This article belongs to the Special Issue Modeling and Simulation of Metal Processing)
  • Feature Paper
  • Article
  • Open Access
12 Citations
4,233 Views
18 Pages

The Effect of Hot Working on the Mechanical Properties of High Strength Biomedical Ti-Nb-Ta-Zr-O Alloy

  • Dalibor Preisler,
  • Miloš Janeček,
  • Petr Harcuba,
  • Jan Džugan and ,
  • Kristýna Halmešová,
  • Jaroslav Málek,
  • Anna Veverková and
  • Josef Stráský
  • + 3 authors+ 0 author

17 December 2019

Beta titanium alloy Ti-35Nb-6Ta-7Zr-0.7O (wt%) was developed as a material intended for the manufacturing of a stem of a hip joint replacement. This alloy contains only biocompatible elements and possesses a very high yield strength already in the ca...

(This article belongs to the Special Issue Alloys for Biomedical Application)
  • Article
  • Open Access
6 Citations
1,805 Views
12 Pages

Wear Behaviors of the Surface of Duplex Cast Steel after the Burnishing Process

  • Grzegorz Stradomski,
  • Joanna Fik,
  • Zbigniew Lis,
  • Dariusz Rydz and
  • Arkadiusz Szarek

21 April 2024

Duplex steel and cast steels have a wide range of applications in many industrial sectors, for example, oil extraction, printing, petrochemical industry, energy—exhaust gases desulphurization systems, seawater desalination plants, and the shipb...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
36 Citations
6,391 Views
10 Pages

17 May 2019

New medium Mn steels for forged components, in combination with a new heat treatment, are presented. This new annealing process implies air-cooling after forging and austenite reversion tempering (AC + ART). This leads to energy saving compared to ot...

(This article belongs to the Special Issue Physical Metallurgy of High Manganese Steels)
  • Article
  • Open Access
2 Citations
2,503 Views
10 Pages

Near Net Forming Research for Fin-Typed LED Radiator

  • Liyong Ni,
  • Shuting He,
  • Yongle Huang,
  • Longjiang Niu and ,
  • Gaofang He and
  • Wei Peng
  • + 1 author+ 0 author

25 February 2022

Pure aluminum radiator is the best choice for heat dissipation of various LED products at present. Its forming methods include common extrusion, die casting, forging, etc. Compared with other forming technologies, the LED radiator formed by cold forg...

  • Review
  • Open Access
1,402 Views
33 Pages

A Review of Research Progress on Automotive Magnesium Alloy Wheels

  • Meng Li,
  • Xing Zhou,
  • Xingmeng Zhang,
  • Lichao An and ,
  • Weijun He,
  • Zhuang Cui,
  • Qiu Ma and
  • Bin Jiang
  • + 3 authors+ 0 author

9 July 2026

Driven by the automotive industry’s strategies for energy conservation, emission reduction, and lightweighting, magnesium alloy wheels have emerged as a key focus of research and industrialization efforts, owing to their high specific strength,...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
9 Citations
3,491 Views
11 Pages

30 August 2021

The use of a hot-forged TiAl alloy enables the fabrication of large parts that are difficult to manufacture by casting or isothermal forging. Ti-42Al-5Mn (at%) is the world’s first TiAl alloy in this category and has been used to manufacture practica...

(This article belongs to the Special Issue Synthesis, Process, Structure, and Properties of Titanium-Based Alloys)
  • Article
  • Open Access
2 Citations
1,015 Views
20 Pages

1 August 2025

A novel stainless steel with high Mn and Mo content (much higher than traditional stainless steel), designated CH241SS, was developed as a potential replacement for Cr-Mo-V alloy steel in the cold forging applications of precision industry. Through c...

(This article belongs to the Special Issue Advanced High Strength Steels: Properties and Applications)
  • Review
  • Open Access
555 Views
32 Pages

12Cr2Mo1V Steel for Free-Forged Hydrogenation Reactor Shells: Defect Control, Microstructural Evolution, and Service Performance—A Review

  • Haitao Wang,
  • Guozheng Quan,
  • Yichou Lin,
  • Lin Gao and ,
  • Yuqing Zhang,
  • Xiao Liu and
  • Haopeng Shi
  • + 2 authors+ 0 author

9 June 2026

Hydrogenation reactor shells are safety-critical thick-section pressure-bearing components in petrochemical hydroprocessing equipment. Long-term exposure to elevated temperature, high pressure, and hydrogen-bearing media requires not only adequate st...

(This article belongs to the Section Metals and Alloys)
  • Proceeding Paper
  • Open Access
1 Citations
2,076 Views
6 Pages

19 September 2023

The 6082 alloy is used to produce DC (direct-chilling) billets for subsequent forging or rolling processes. It is necessary to control the solidification structure in casting billets during the casting process. Based on the previous work, the energy...

(This article belongs to the Proceedings of The 15th International Aluminium Conference)
  • Article
  • Open Access
2,650 Views
11 Pages

The Casting and Hot Forging of Low-Carbon Copper-Bearing Steel and Its Substructural Characterization

  • Pawan Kumar,
  • Mamookho Elizabeth Makhatha,
  • Shivashankarayya Hiremath and
  • Vishwanatha H. M.

5 October 2023

The casting of metal alloys followed by hot forging is a widely used manufacturing technology to produce a homogeneous microstructure. The combination of mechanical and thermal energy envisages the microstructural properties of metal alloys. In the p...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
29 Citations
5,659 Views
17 Pages

Effect of the Microstructure and Distribution of the Second Phase on the Stress Corrosion Cracking of Biomedical Mg-Zn-Zr-xSr Alloys

  • Lianxi Chen,
  • Yinying Sheng,
  • Xiaojian Wang,
  • Xueyang Zhao and ,
  • Hui Liu and
  • Wei Li
  • + 1 author+ 0 author

3 April 2018

The stress corrosion cracking (SCC) properties of the bi-directional forged (BDF) Mg-4Zn-0.6Zr-xSr (ZK40-xSr, x = 0, 0.4, 0.8, 1.2, 1.6 wt %) alloys were studied by the slow strain rate tensile (SSRT) testing in modified simulated body fluid (m-SBF)....

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
8 Citations
3,155 Views
18 Pages

Friction Weldability of a High Nb Containing TiAl Alloy

  • Xiangjun Xu,
  • Junpin Lin,
  • Jian Guo and
  • Yongfeng Liang

30 October 2019

The friction weldability of Ti-45Al-8.5Nb-0.2W-0.2B-0.02Y alloy has been investigated by optimizing process parameters and analyzing the microstructures and tensile properties of the joints. The as-cast alloy with a nearly lamellar (NL) microstructur...

  • Article
  • Open Access
18 Citations
4,804 Views
11 Pages

Microstructure Evolution and Mechanical Properties of 0.4C-Si-Mn-Cr Steel during High Temperature Deformation

  • Fei Zhang,
  • Yang Yang,
  • Quan Shan,
  • Zulai Li and ,
  • Jinfeng Bi and
  • Rong Zhou
  • + 1 author+ 0 author

1 January 2020

Herein, the effects of height-diameter ratios (H/D) on the microstructure evolution and mechanical properties of 0.4C-Si-Mn-Cr steel during high temperature deformation are reported. The compression experiments were performed on steel samples using G...

  • Article
  • Open Access
7 Citations
3,880 Views
14 Pages

Improving Mechanical Properties of a Forged High-Manganese Alloy by Regulating Carbon Content and Carbide Precipitation

  • Zhizhou Pan,
  • Tao Liu,
  • Jiang Li,
  • Lei Wang and ,
  • Tianyu Zhang,
  • Jian Wang and
  • Qing Tao
  • + 2 authors+ 0 author

11 March 2022

The effect of different heat treatment processes (as-cast, annealing, forging, and annealing after forging) on the microstructure transition and mechanical property evolution of Fe50Mn30Co10Cr10 alloys with different carbon contents (0, 0.2, 0.5 wt.%...

  • Article
  • Open Access
6 Citations
2,605 Views
13 Pages

1 December 2022

To improve the service life and reduce the repair cost of continuous casting rollers, a new welding-hammering hybrid remanufacturing process in which the roller was designed with a gradient structure was proposed, and corresponding equipment was deve...

(This article belongs to the Special Issue Research on Heat Treatment of Advanced Metallic Materials)
  • Article
  • Open Access
4 Citations
2,514 Views
12 Pages

4 August 2022

Metal matrix nanocomposites are attracting attention because of their great potential for improved mechanical properties and possible functionalization. These hybrid materials are often produced by casting processes, but they can also develop their p...

(This article belongs to the Special Issue Metal-Matrix Nanocomposites and Their Applications)
  • Feature Paper
  • Article
  • Open Access
28 Citations
4,298 Views
16 Pages

20 November 2019

The hot compressive behavior and processing maps of as-cast and extruded 7075 aluminum alloys with a similar grain size (320–350 μm) were studied and compared, which allows us to directly observe the effect of segregated phases in the as-cas...

  • Article
  • Open Access
23 Citations
6,256 Views
14 Pages

Investigation into the Microstructure and Hardness of Additively Manufactured (3D-Printed) Inconel 718 Alloy

  • Abdulaziz Kurdi,
  • Abdelhakim Aldoshan,
  • Fahad Alshabouna,
  • Abdulaziz Alodadi and ,
  • Ahmed Degnah,
  • Husain Alnaser,
  • Thamer Tabbakh and
  • Animesh Kumar Basak
  • + 3 authors+ 0 author

16 March 2023

Additive manufacturing (AM) of Ni-based super alloys is more challenging, compared to the production other metallic alloys. This is due to their high melting point and excellent high temperature resistance. In the present work, an Inconel 718 alloy w...

(This article belongs to the Special Issue 3D Printing of Metallic Materials)
  • Article
  • Open Access
4 Citations
3,583 Views
12 Pages

3 September 2019

Al–8Zn–2.5Mg–1Cu alloy casting blocks were subjected to homogenization and annealing. The treated blocks were then held at different temperatures and forged in different dies to obtain 20 mm-thick plates. After T73 heat treatment, t...

(This article belongs to the Special Issue Advanced Manufacturing Technology in the Automotive Industry)
  • Article
  • Open Access
2 Citations
2,616 Views
15 Pages

Study on the Subcritical Quenching Process of High-Chromium Cast Iron Prepared by Squeeze Casting

  • Aili Shan,
  • Shuming Xing,
  • Biwei Zhao,
  • Wenjing Gao and ,
  • Tong Wu and
  • Hongji Sun
  • + 1 author+ 0 author

12 March 2023

In this study, the heat treatment process of a high-chromium cast iron (HCCI) alloy prepared via 128 MPa squeeze casting at different subcritical quenching temperatures was investigated. The results showed that subcritical heat treatment can change t...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
6 Citations
3,245 Views
13 Pages

Integration of Hot Isostatic Pressing and Heat Treatment for Advanced Modified γ-TiAl TNM Alloys

  • Daniel Bernal,
  • Xabier Chamorro,
  • Iñaki Hurtado,
  • Inmaculada Lopez-Galilea and ,
  • David Bürger,
  • Sebastian Weber and
  • Iñaki Madariaga
  • + 2 authors+ 0 author

14 June 2022

The conventional processing route of TNM (Ti-Nb-Mo) alloys combines casting and Hot Isostatic Pressing (HIP) followed by forging and multiple heat treatments to establish optimum properties. This is a time-consuming and costly process. In this study...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Alloys)
  • Review
  • Open Access
11 Citations
8,130 Views
19 Pages

Research Progress on the Manufacturing of Screw-Shaped Parts in Screw Compressors

  • Yongfei Wang,
  • Linhua Xiong,
  • Dongxiao Feng,
  • Xiaoming Liu and
  • Shengdun Zhao

27 February 2024

Screw compressors are highly researched and developed prospects in industry because of their long service life, high transmission efficiency, low footprint and low vibration. As the key core part of the screw compressor, the screw is a typical, long-...

(This article belongs to the Section Energy Science and Technology)
  • Article
  • Open Access
18 Citations
5,077 Views
11 Pages

Effect of Multi-Directional Forging on the Microstructure and Mechanical Properties of β-Solidifying TiAl Alloy

  • Ning Cui,
  • Qianqian Wu,
  • Kexiao Bi,
  • Jin Wang and ,
  • Tiewei Xu and
  • Fantao Kong
  • + 1 author+ 0 author

28 April 2019

This study systematically investigated the influence of multi-directional forging (MDF) on the microstructural evolution, hot deformation behavior, and tensile properties of a β-solidifying TiAl alloy. The initial lamellar microstructure of an as-cas...

(This article belongs to the Special Issue Advanced Technology for Materials Synthesis and Processing)
  • Feature Paper
  • Article
  • Open Access
15 Citations
4,430 Views
14 Pages

19 February 2021

Hot plastic working behavior and microstructure evolution were investigated during a production process of four medium-Mn steels, which differed in Mn (3 and 5%) and Nb contents. The production process started with casting, followed by hot forging, r...

(This article belongs to the Special Issue Advanced Multiphase Steels)
  • Article
  • Open Access
6 Citations
2,618 Views
17 Pages

Research on the Secondary Forgeability of High Volume Fraction Whisker Reinforced Aluminum Matrix Composites of Original Squeeze Casting

  • Shucong Xu,
  • Lin Yuan,
  • Lei Wang,
  • Jinyu Li and ,
  • Fuchang Xu,
  • Zhenzhu Zheng,
  • Debin Shan and
  • Bin Guo
  • + 3 authors+ 0 author

27 November 2021

The poor formability of high volume fraction whisker reinforced aluminum matrix composites of original squeeze casting is an important factor restricting its further development and application. Currently, there are no reports on the secondary forgea...

(This article belongs to the Special Issue Study on Plastic Processing Technologies for Light-Weight Metals)
  • Article
  • Open Access
1 Citations
714 Views
16 Pages

Effects of Ta Addition on the Solidification and Homogenization of Ni-Based Superalloy GH4065A

  • Wenyun Zhang,
  • Linhan Li,
  • Hongyu Su,
  • Tong Wang and ,
  • Ji Zhang,
  • Yongquan Ning and
  • Beijiang Zhang
  • + 2 authors+ 0 author

5 March 2026

Increased alloying content in advanced Ni-based superalloys for large disc forgings intensifies microsegregation and promotes the formation of detrimental secondary phases, challenging the cast-and-wrought processing route. This study investigates th...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Alloys (2nd Edition))
  • Article
  • Open Access
13 Citations
5,169 Views
18 Pages

Effect of Heat Treatment on the Microstructure and Hardness of Ni-Based Alloy 718 in a Variable Thickness Geometry Deposited by Powder Fed Directed Energy Deposition

  • Pedro Ramiro,
  • Haize Galarraga,
  • Anabel Pérez-Checa,
  • Mikel Ortiz and ,
  • Amaia Alberdi,
  • Trunal Bhujangrao,
  • Elena Morales and
  • Eneko Ukar
  • + 3 authors+ 0 author

31 May 2022

Feature addition to existing parts is a trending application for Directed Energy Deposition (DED) and can be used to add complex geometry features to basic forged geometries with the aim to reduce and simplify the number of processing steps as machin...

(This article belongs to the Special Issue Directed Energy Deposition of Metal Alloys)
  • Article
  • Open Access
3 Citations
5,018 Views
9 Pages

23 September 2016

Friction welding of cast Fe-40Al alloy was carried out at 1000 rmp for various friction times, friction pressures, and forging pressures. The microstructures of the interface of welded samples were analyzed by optical and scanning electron microscopy...

(This article belongs to the Special Issue Intermetallics 2016)
  • Article
  • Open Access
6 Citations
1,893 Views
16 Pages

28 August 2025

In modern industrial manufacturing, the mechanical properties of large bearing housing castings are critical to equipment reliability and lifespan. Traditional prediction methods relying on experimental testing and empirical formulas face challenges...

  • Article
  • Open Access
39 Citations
6,516 Views
22 Pages

Comparative Analysis of Mechanical Properties: Conventional vs. Additive Manufacturing for Stainless Steel 316L

  • Constantin Alex Sumanariu,
  • Cătălin Gheorghe Amza,
  • Florin Baciu,
  • Mihai Ion Vasile and
  • Adrian Ionut Nicoara

29 September 2024

This research investigates the tensile strength and microstructural properties of stainless steel 316L, comparing samples fabricated using additive manufacturing (AM) to those produced via conventional manufacturing techniques such as forging and cas...

(This article belongs to the Special Issue Additive Manufacturing and Nondestructive Testing of Metals)
  • Article
  • Open Access
14 Citations
4,157 Views
17 Pages

5 January 2022

Additive manufacturing processes such as selective laser melting are rapidly gaining a foothold in safety-relevant areas of application such as powerplants or nuclear facilities. Special requirements apply to these applications. A certain material be...

(This article belongs to the Special Issue Emerging Materials for Additive Manufacturing)
  • Article
  • Open Access
37 Citations
5,992 Views
14 Pages

Direct Energy Deposition of TiAl for Hybrid Manufacturing and Repair of Turbine Blades

  • Silja-Katharina Rittinghaus,
  • Janett Schmelzer,
  • Marcus Willi Rackel,
  • Susanne Hemes and ,
  • Andreas Vogelpoth,
  • Ulrike Hecht and
  • Andreas Weisheit
  • + 2 authors+ 0 author

1 October 2020

While repair is mainly used to restore the original part geometry and properties, hybrid manufacturing aims to exploit the benefits of each respective manufacturing process regarding either processing itself or resulting part characteristics. Especia...

(This article belongs to the Special Issue Challenges in Additive Manufacturing: From Coupon Studies to Components)
  • Review
  • Open Access
1 Citations
1,623 Views
42 Pages

Next-Generation Manufacturing Technologies for High-Performance Turbomachinery Blades: Trends, Challenges, and Future Directions

  • Raluca-Andreea Roșu,
  • Emilia Georgiana Prisăcariu,
  • Oana Dumitrescu and
  • Daniel Eugeniu Crunteanu

8 May 2026

Manufacturing high-performance turbomachinery blades remains one of the most demanding challenges in aerospace and energy engineering, requiring tight control over microstructure, geometry, and cooling architectures. Despite rapid progress in casting...

(This article belongs to the Special Issue Advanced Manufacturing and Intelligent Design for Next-Generation Materials and Devices)

of 2