Plasma electrolytic boriding (PEB) is a method of combination surface strengthening and surface texturing on metal. In this study, the kinetics and the lubrication friction of borided layers in the plasma electrolytic boriding on the Q235 were invest...
In this paper, a nanocrystalline surface layer without impurities was fabricated on Ti-6Al-4V alloy by means of surface mechanical attrition treatment (SMAT). The grain size in the nanocrystalline layer is about 10 nm and grain morphology displays a...
Surface boriding of pure titanium was performed using dissolved salt impregnation to modify the surface hardness and improve wear performance. The effect of boriding temperature (950–1150 °C) on the microstructure, composition, and room-temperature t...
(1) Background: Boron-based diffusion layers possess great application potential in forging and die-casting due to their favorable mechanical and thermophysical properties. This research explores the enhanced wear resistance of tungsten hot-work stee...
This study investigates microstructural and mechanical changes in automotive steel after a boriding process. Extended thermal exposure was analyzed to study the development of carbon diffusion zones (CDZs) and the resulting mechanical properties. Exp...
This paper presents the findings of corrosion studies of cast steel 20GL (structural alloyed steel: G—1% of Mn, L—alloyed) with boriding, selected as a promising passive method of protecting hydraulic machine elements from hydro-solid par...
The influence of alternating current (AC) field on the pack boriding process for medium carbon steel was investigated through characterization of microstructure, phase composition, microhardness, and corrosion resistance of the boride layer and its m...
This study investigates the microstructural evolution, mechanical performance, and electrochemical corrosion behavior of nanocrystalline boride layers formed on an Fe-20Cr-5Al ferritic alloy by pack boriding at 950 °C for 4 h. X-ray diffraction (...
Boriding is widely used in various industries due to the unique combination of high mechanical, corrosion, and tribological properties of boride layers formed on the surface of steel components. In this work, the powder boriding of 40 Kh steel was in...
Compacted graphite iron (CGI) is widely used in thermomechanically demanding engineering applications owing to its high thermal conductivity, vibration-damping capacity, and machinability. However, its surface performance can be limited under the sim...
Laser boriding is a surface treatment that involves the simultaneous re-melting and mixing of the alloying material, containing amorphous boron blended with diluted polyvinyl alcohol, with the substrate material (Nimonic 80A-alloy). As a result of hi...
18CrNiMo7-6 steel is widely used in high-load mechanical components, but its poor surface hardness and corrosion resistance limit its service life. This study performed vacuum solid boriding treatment on 18CrNiMo7-6 steel at 1000 °C for different...
In this study, mechanical and electrochemical performance of borided additively manufactured (AM) and wrought 8620 low alloy steel were investigated and compared to their bare counterparts. The microstructure of borided 8620 exhibited the presence of...
The influence of prior pack boriding on the microstructure and properties of nanobainitised X37CrMoV5-1 hot-work tool steel was investigated in the present work. Pack boriding was conducted at 950 °C for 4 h. Nanobainitising consisted of two-step...
The effect of a new hybrid heat treatment consisting of pack-boriding and nanobainitising on the microstructure and properties of EN 66SiMnCrMo6-6-4 bearing steel was investigated. The hybrid treatment produces a new high-strength (ca. 1480 MPa) mate...
This study investigates the effects of surface thermochemical treatments using boriding, nitriding, and boronitriding on the microstructure and mechanical properties of martensitic stainless steel AISI 420 ESR. Powder-pack boriding, gas nitriding, an...
DIN 16MnCr5 is commonly used in mechanical engineering contact applications such as gears, joint parts, shafts, gear wheels, camshafts, bolts, pins, and cardan joints, among others. This study examined the microstructural and mechanical properties an...
One of the primary challenges in the automotive industry is the wear of engine components, such as the crankshaft and camshaft, which is the most pronounced during the engine’s startup phase, when the amount of lubricant fluid is at its lowest....
The mechanical performance of API 5L grade B steel, after undergoing a thermochemical boriding process, was assessed. We quantified the boride layer microhardness over cross-section specimens, with the aim of characterizing the mechanical resistance...
The surface characteristics and friction behaviour of titanium Grade 2 with modified nitride (TiN, Ti2N) and boride (TiB) compound layers were investigated. It was shown that during non-contact boriding in oxygen-containing medium of titanium, the di...
Nickel-based superalloys are particularly suitable for applications under corrosive conditions. Economic advantages can be achieved by limiting the use of materials to the surface region. Furthermore, the tribological property profile can be signific...
Boriding is a thermochemical process that improves the surface properties of metallic materials, such as wear resistance, hardness, and Young’s modulus. The current work evaluated the kinetics of boride layers formed by boriding on AISI H13 ste...
In this study, boride layers on C70W2 steel, obtained by boronizing at temperatures ranging from 870 to 970 °C and durations from 4 to 8 h, were investigated. The characterization of the layers was carried out using a new approach based on the ch...
The plasma paste boriding process was used for production of the borided layers on pure nickel and nickel-chromium alloys. The produced layers consisted of nickel borides only (in the case of nickel) or a nickel and chromium borides mixture (in the c...
Pack boriding with CeO2 was performed on the powder metallurgical (PM) near-α type titanium alloy at a temperature of 1273–1373 K for 5–15 h followed by air cooling. The microstructure analysis showed that the boride layer on the su...
Commercially pure titanium was plasma paste borided using various temperatures of the process. An increase in the boriding temperature resulted in an increase in the thickness of the borided layer. All the layers produced consisted of an outer compac...
This study presents new results on the practical adhesion behavior of a boride layer formed on Monel 400 alloy, developed using the powder-pack boriding (PPBP) at 1223 K for 2, 4, and 6 h of exposure times, obtaining layer thicknesses from approximat...
In this study, a novel high-manganese steel (HMS) was borided at 850, 900 and 950 °C for 2, 4, and 6 h by the pack boriding process. Contrary to previous literature, borided HMS uncommonly exhibited saw-tooth morphology like low alloy steels, and man...
The powder-pack boriding technique with an open retort was used to form borided layers on X165CrV12 tool steel. The process was carried out at 1123, 1173, and 1223 K for 3, 6, and 9 h. As a result of boriding the high-chromium substrate, the produced...
All-in-one radiation shielding is an emerging concept in developing new-generation radiation protection materials since various forms of ionizing radiation, such as neutrons and gamma rays, can occur simultaneously. In this study, we examine the abil...
We demonstrate synthesis of the ternary intermetallic MgNi3B2 using autogenous pressure from the reaction of NaBH4 with Mg and Ni metal powder. The decomposition of NaBH4 to H2 and B2H6 commences at low temperatures in the presence of Mg and/or Ni an...
Wear mitigation in a sliding couple is challenging if wear has to be minimized on both surfaces. In this paper, ball-on-disk testing is performed on sliding couples where both surfaces (ball and disk) are treated for wear resistance. Studied material...
The study investigates the effect of plasma-electrolytic polishing on the structure and wear resistance of 30KhGSA steel after plasma-electrolytic boriding. Plasma-electrolytic boriding was carried out in a boron-containing electrolyte at a temperatu...
The wear resistance of diffusion coatings in conditions of specific pressures of 3, 7 and 10 MPa was studied. The boride coatings were prepared by means of diffusion methods using C45 steel as the substrate material. Research on the microstructure an...
Layers of iron–nickel Fe-Ni-B-type borides were produced on C45 steel using a new hybrid treatment variant which combines boriding under glow discharge conditions with galvanic nickel precoating. The aim was to investigate whether these layers...
The unique powder-pack boriding technique using an open retort with boriding medium was applied for the first time in order to produce boride layers on K190 ledeburitic chromium steel manufactured using powder metallurgy. The processes were carried o...
Plasma paste boriding was employed in order to produce the boride layers on Nimonic 80A-alloy. The process was carried out at temperatures of 1023 K, 1073 K and 1123 K for 3, 4 and 6 h in a gas mixture of 50% H2-50% Ar. Borax paste was used as a boro...
Two kinetic approaches (integral method and Dybkov method) have been applied for simulating the boriding kinetics of AISI M2 steel in the range of 1173 to 1323 K, by including the effect of incubation periods. For the integral method, a peculiar solu...
Although the use and promotion of renewable energies have increased in recent years, it is evident that the use of fossil fuels such as oil and gas continues to be of great importance. Likewise, pipelines are widely recognized as the most reliable an...
In sealing, sliding, and power transmission operations, surface quality and contact tolerances have high impacts on material system efficiency. Although the boriding process improves the wear resistance of metallic surfaces, it increases surface roug...
In this study, a comprehensive machine learning (ML) model was developed to predict and optimize boride coating thickness on steel surfaces based on boriding parameters such as temperature, time, boriding media, method, and alloy composition. In a da...
Boride layers are typically used to combat the wear and corrosion of metals. For this reason, to improve our knowledge of the boriding process, this research studied the effect of the size of the treated material on the kinetics of the growth of the...
The present study discusses the influence of engine oils on the tribological parameters of sliding couples with laser borided surface layer. The borided layer was formed on specimens made from AISI 5045 steel by laser remelting of a surface layer coa...
This study evaluates pack boriding as an alternative to induction surface hardening in the manufacture of highly stressed tubular components exposed to combined mechanical, thermal and tribological loading, using the low-alloy Cr–V steel STN 15...
In the work of this contribution, two kinetics models have been employed to assess the boron diffusivities in nickel borides in case of Inconel 718 alloy. The first approach, named the alternative diffusion model (ADM), used the modified version of m...
This review systematizes data on the phase composition and key properties of compounds in the W–B system, including thermodynamic stability, crystal structure, and hardness. The current understanding of the binary W–B phase diagram and th...
The stochastic nature of the thickness of boride layers formed on carbon steel is described in this paper. Additionally, the probability distribution of the layer thickness is studied to determine the best-fit probability distribution. The study comb...
This manuscript shows the study of the structure, mechanical, and chemical properties of high-entropy borides MeB2 (Me = Ti, Ta, Nb, Hf, Zr). High-entropy borides were synthesized by mechanical alloying and spark plasma sintering. A chemically homoge...
In the present work, two mathematical diffusion models have been used to estimate the growth of the iron monoboride and diiron boride coating formed on AISI 420 steel. The boronizing of the steel was carried out with the solid diffusion packing metho...
Transition metal borides have garnered significant research interest due to their versatile properties, including superconductivity and exceptional hardness. This study examines the stable crystal structures of Rhodium-Boron (Rh-B) compounds under hi...
of 8