Skip to Content

37 Results Found

  • Article
  • Open Access
2 Citations
2,989 Views
21 Pages

Ensuring efficient long-term quality control of the raw mix remains a priority for the cement industry, supporting initiatives to lower the CO2 footprint by incorporating significant amounts of alternative fuels and raw materials in clinker productio...

  • Article
  • Open Access
3 Citations
2,014 Views
13 Pages

15 January 2026

Permanent magnet synchronous motors (PMSM) are widely favored in industry for their high efficiency, compact size, and robust performance. This study employs a model-based PID control approach for speed regulation of PMSM. In contrast to traditional...

(This article belongs to the Special Issue Advanced Estimation, Control, and Optimization Techniques for Synchronous Machines in Next-Generation Electrified Systems)
  • Article
  • Open Access
21 Citations
10,976 Views
20 Pages

Calibration of UR10 Robot Controller through Simple Auto-Tuning Approach

  • Cosmin Copot,
  • Cristina Muresan,
  • Clara-Mihaela Ionescu,
  • Steve Vanlanduit and
  • Robin De Keyser

This paper presents a calibration approach of a manipulator robot controller using an auto-tuning technique. Since the industry requires machines to run with increasing speed and precision, an optimal controller is too demanding. Even though the robo...

  • Article
  • Open Access
191 Citations
19,666 Views
18 Pages

Neural Network-Based Self-Tuning PID Control for Underwater Vehicles

  • Rodrigo Hernández-Alvarado,
  • Luis Govinda García-Valdovinos,
  • Tomás Salgado-Jiménez,
  • Alfonso Gómez-Espinosa and
  • Fernando Fonseca-Navarro

5 September 2016

For decades, PID (Proportional + Integral + Derivative)-like controllers have been successfully used in academia and industry for many kinds of plants. This is thanks to its simplicity and suitable performance in linear or linearized plants, and unde...

(This article belongs to the Section Sensor Networks)
  • Article
  • Open Access
6 Citations
4,963 Views
24 Pages

Improved Decoupling Control for a Powershift Automatic Mechanical Transmission Employing a Model-Based PID Parameter Autotuning Method

  • Zhiqiang Sun,
  • Kazushi Sanada,
  • Bingzhao Gao,
  • Jiaqi Jin and ,
  • Jingshun Fu,
  • Longfeng Huang and
  • Xiaoliang Wu
  • + 2 authors+ 0 author

20 July 2020

Automatic mechanical transmission (AMT) with a gearshift assistant mechanism is a novel transmission architect concept aiming to improve the torque interruption and driveline jerk of AMT. During the shifting process, the shifting performance deterior...

(This article belongs to the Section Actuators for Surface Vehicles)
  • Article
  • Open Access
5 Citations
2,716 Views
19 Pages

9 February 2024

The 3D integrated circuit (3D-IC) is garnering significant attention from academia and industry as a key technology leading the post-Moore era, offering new levels of efficiency, power, performance, and form-factor advantages to the semiconductor ind...

(This article belongs to the Special Issue Advances in Mathematical Methods, Machine Learning and Deep Learning Based Applications, 2nd Edition)
  • Article
  • Open Access
13 Citations
4,388 Views
22 Pages

25 December 2023

An effective control of air handling unit (AHU) systems is crucial not only for managing the energy consumption of buildings but ensuring indoor thermal comfort for occupants. Although the initial control schema of AHU is appropriate at installation...

(This article belongs to the Special Issue AI and Data Analytics for Energy-Efficient and Healthy Buildings)
  • Article
  • Open Access
35 Citations
5,088 Views
16 Pages

Research on Improved Auto-Tuning of a PID Controller Based on Phase Angle Margin

  • Deliang Zeng,
  • Yanqiu Zheng,
  • Wei Luo,
  • Yong Hu and ,
  • Qingru Cui,
  • Qing Li and
  • Chen Peng
  • + 2 authors+ 0 author

6 May 2019

In order to realize fast and efficient tuning of the proportional-integral-derivative (PID) controller parameters in thermal power plants, this paper thoroughly analyzes the problems existing in the relay characteristic method based on the phase angl...

  • Article
  • Open Access
23 Citations
5,453 Views
16 Pages

This study presents a new auto-tuning nonlinear PID controller for a nonlinear electric vehicle (EV) model. The purpose of the proposed control was to achieve two aims. The first aim was to enhance the dynamic performance of the EV regarding internal...

(This article belongs to the Special Issue Vehicle Control and Drive Systems for Electric Vehicles)
  • Article
  • Open Access
5 Citations
3,534 Views
22 Pages

17 December 2020

Linear motors (LMs) are widely used in numerous industry automation where precise and fast motions are required to convert electric energy into linear actuation without the need of any switching mechanism. This study aims to develop a control strateg...

(This article belongs to the Special Issue Applied Intelligent Control and Perception in Robotics and Automation)
  • Article
  • Open Access
2 Citations
3,089 Views
22 Pages

4 September 2020

The main concept is to design the novel autotuner in a way that it will introduce benefits that arise from the effect of the fusion of the quantitative and qualitative knowledge gained from identification experiments, long-time expertise, and theoret...

(This article belongs to the Special Issue Heuristic Optimization Techniques Applied to Power Systems)
  • Article
  • Open Access
9 Citations
6,737 Views
25 Pages

Automatic Tuning and Turbulence Mitigation for Fixed-Wing UAV with Segmented Control Surfaces

  • Abdul Sattar,
  • Liuping Wang,
  • Ayaz Ahmed Hoshu,
  • Shahzeb Ansari and ,
  • Haider-e Karar and
  • Abdulghani Mohamed
  • + 1 author+ 0 author

16 October 2022

Unlike bigger aircraft, the small fixed-wing unmanned aerial vehicles face significant stability challenges in a turbulent environment. To improve the flight performance, a fixed-wing UAV with segmented aileron control surfaces has been designed and...

(This article belongs to the Section Drone Design and Development)
  • Article
  • Open Access
3 Citations
2,374 Views
29 Pages

Development of a Simulation Model of a PID Controller Based on Simatic S7 Hardware-Software Tools and “Digital Twin” Technology

  • Mykola Nykolaychuk,
  • Leonid Zamikhovskyi,
  • Ivan Levitskyi,
  • Volodymyr Kopei and
  • Liubomyr Ropyak

The object of the research is the information interaction processes between the components of a simulation model of a PID controller based on Digital Twin technology. The problem addressed lies in the need to extend the functionality of various model...

(This article belongs to the Topic Smart Production in Terms of Industry 4.0 and 5.0)
  • Article
  • Open Access
6 Citations
6,899 Views
20 Pages

The Application of a New PID Autotuning Method for the Steam/Water Loop in Large Scale Ships

  • Shiquan Zhao,
  • Sheng Liu,
  • Robain De Keyser and
  • Clara-Mihaela Ionescu

6 February 2020

In large scale ships, the most used controllers for the steam/water loop are still the proportional-integral-derivative (PID) controllers. However, the tuning rules for the PID parameters are based on empirical knowledge and the performance for the l...

(This article belongs to the Special Issue Optimization-Driven Methods for Optimal Operation and Control Strategies)
  • Review
  • Open Access
79 Citations
7,152 Views
25 Pages

A Review of Recent Developments in Autotuning Methods for Fractional-Order Controllers

  • Cristina I. Muresan,
  • Isabela Birs,
  • Clara Ionescu,
  • Eva H. Dulf and
  • Robin De Keyser

The scientific community has recently seen a fast-growing number of publications tackling the topic of fractional-order controllers in general, with a focus on the fractional order PID. Several versions of this controller have been proposed, includin...

(This article belongs to the Special Issue Fractional-Order System: Control Theory and Applications)
  • Article
  • Open Access
1,621 Views
14 Pages

Brushless DC (BLDC) motors are now the dominant propulsion choice for electric vehicles (EVs) because of their high torque density, efficiency and reliability, but their nonlinear dynamics, electronic commutation, and wide load and speed range make f...

(This article belongs to the Section Vehicle and Transportation Systems)
  • Article
  • Open Access
5 Citations
1,706 Views
21 Pages

Personalised Fractional-Order Autotuner for the Maintenance Phase of Anaesthesia Using Sine-Tests

  • Marcian D. Mihai,
  • Isabela R. Birs,
  • Nicoleta E. Badau,
  • Erwin T. Hegedus and ,
  • Amani Ynineb and
  • Cristina I. Muresan
  • + 1 author+ 0 author

The research field of clinical practice has experienced a substantial increase in the integration of information technology and control engineering, which includes the management of medication administration for general anaesthesia. The invasive natu...

(This article belongs to the Special Issue Fractional Mathematical Modelling: Theory, Methods and Applications)
  • Article
  • Open Access
9 Citations
3,881 Views
18 Pages

Tuning the Proportional–Integral–Derivative Control Parameters of Unmanned Aerial Vehicles Using Artificial Neural Networks for Point-to-Point Trajectory Approach

  • Burak Ulu,
  • Sertaç Savaş,
  • Ömer Faruk Ergin,
  • Banu Ulu and ,
  • Ahmet Kırnap,
  • Mehmet Safa Bingöl and
  • Şahin Yıldırım
  • + 2 authors+ 0 author

26 April 2024

Nowadays, trajectory control is a significant issue for unmanned micro aerial vehicles (MAVs) due to large disturbances such as wind and storms. Trajectory control is typically implemented using a proportional–integral–derivative (PID) co...

(This article belongs to the Section Sensors and Robotics)
  • Article
  • Open Access
6 Citations
5,913 Views
13 Pages

An ANN-Based Temperature Controller for a Plastic Injection Moulding System

  • Maksym Khomenko,
  • Oleksandr Veligorskyi,
  • Roustiam Chakirov and
  • Yuriy Vagapov

1 November 2019

This paper proposes an approach to an ANN-based temperature controller design for a plastic injection moulding system. This design approach is applied to the development of a controller based on a combination of a classical ANN and integrator. The co...

(This article belongs to the Section Systems & Control Engineering)
  • Article
  • Open Access
12 Citations
7,633 Views
25 Pages

Nonlinear Tank-Level Control Using Dahlin Algorithm Design and PID Control

  • Tatijana Dlabač,
  • Sanja Antić,
  • Martin Ćalasan,
  • Alenka Milovanović and
  • Nikola Marvučić

26 April 2023

Liquid-level control in tanks is widely used in various industrial sectors. Due to problems arising from the case that the liquid level is above or below the recommended, the process of its control is of great significance. The proportional integral...

(This article belongs to the Special Issue Applied Maritime Engineering and Transportation Problems 2022)
  • Article
  • Open Access
11 Citations
4,675 Views
15 Pages

A University Building Test Case for Occupancy-Based Building Automation

  • Siva Swaminathan,
  • Ximan Wang,
  • Bingyu Zhou and
  • Simone Baldi

14 November 2018

Heating, ventilation and air-conditioning (HVAC) units in buildings form a system-of-subsystems entity that must be accurately integrated and controlled by the building automation system to ensure the occupants’ comfort with reduced energy cons...

(This article belongs to the Special Issue Optimisation Models and Methods in Energy Systems)
  • Article
  • Open Access
8 Citations
2,429 Views
25 Pages

A Novel Approach to Robust PID Autotuner for Overdamped Systems: Case Study on Liquid Level System

  • Erhan Yumuk,
  • Cosmin Copot,
  • Cristina I. Muresan and
  • Clara M. Ionescu

9 December 2024

This paper proposes and validates an automatic control tuning methodology based on initial frequency response. This approach facilitates the design of robust PID controllers for overdamped systems characterized by S-shaped step responses. In the prio...

(This article belongs to the Special Issue Control Design and Numerical Computation in Manufacturing Process System)
  • Article
  • Open Access
11 Citations
3,918 Views
20 Pages

Improved Continuous-Cycling Method for PID Autotuning

  • Kyeong Hoon Kim,
  • Jeong Eun Bae,
  • Syng Chul Chu and
  • Su Whan Sung

11 March 2021

An improved continuous-cycling method is proposed for the autotuning of the proportional–integral–derivative (PID) controller. The proposed method can identify the frequency response of the process at a preset phase angle without a modeling error. Mo...

(This article belongs to the Section Process Control, Modeling and Optimization)
  • Article
  • Open Access
52 Views
27 Pages

An Intelligent Control Strategy for Electromagnetically Driven Control Valve Systems Based on DDPG-PID Auto-Tuning

  • Wei Li,
  • Shuxun Li,
  • Bojiang Yin,
  • Jian Zhang and ,
  • Jianlong Zhu and
  • Zhijun Lei
  • + 1 author+ 0 author

4 November 2026

In aerospace, industrial automation, and intelligent equipment, electromagnetically driven valve control systems often suffer from low control accuracy and stalling during switching and servo operations because of strong nonlinearity, parameter uncer...

(This article belongs to the Section Electronic Sensors)
  • Article
  • Open Access
40 Citations
9,864 Views
33 Pages

10 September 2021

Unmanned aerial vehicles or drones are becoming one of the key machines/tools of the modern world, particularly in military applications. Numerous research works are underway to explore the possibility of using these machines in other applications su...

(This article belongs to the Special Issue Unmanned Aircraft Systems with Autonomous Navigation)
  • Article
  • Open Access
8 Citations
4,256 Views
14 Pages

3 January 2023

This paper describes a novel method for the online identification of an analog second-order plus dead time (SOPDT) model. It requires the measurement of four physical quantities, for which a relay is used. Based on these measurements, the parameters...

(This article belongs to the Section Robotics and Automation)
  • Article
  • Open Access
284 Views
41 Pages

PID Tuning Approach Using Kolmogorov–Arnold Networks Under Varying Operational Conditions

  • Lily Chiparova,
  • Vasil Popov,
  • Sevil Ahmed-Shieva and
  • Nikola Shakev

27 September 2026

This paper investigates the use of Kolmogorov–Arnold networks (KANs) for dynamic proportional-integral-derivative (PID) control tuning in first- and second-order linear systems under noisy conditions, time-varying reference trajectories, and va...

(This article belongs to the Special Issue Advances in Industrial Robotics and Control Systems)
  • Article
  • Open Access
7 Citations
3,028 Views
34 Pages

Real-Flight-Path Tracking Control Design for Quadrotor UAVs: A Precision-Guided Approach

  • Moataz Aly,
  • Badar Ali,
  • Fitsum Y. Mekonnen,
  • Mohamed Elhesasy and ,
  • Mingkai Wang,
  • Mohamed M. Kamra and
  • Tarek N. Dief
  • + 2 authors+ 0 author

12 December 2025

This study presents the design and implementation of a real-time flight-path tracking control system for a quadrotor unmanned aerial vehicle (UAV) capable of accurately following a mobile ground target under dynamic and uncertain environmental condit...

  • Article
  • Open Access
28 Citations
10,582 Views
23 Pages

30 August 2022

This paper presents an optimized robust trajectory control system for an autonomous tiltrotor bi-copter based on an incremental nonlinear dynamic inversion (INDI) strategy combined with a set of PID/PD controllers. The methodology includes a lower le...

(This article belongs to the Section Sensors and Control in Robotics)
  • Article
  • Open Access
4 Citations
2,793 Views
15 Pages

Modeling and Position Control of Fiber Braided Bending Actuator Using Embedded System

  • Mohd Nizar Muhammad Nasir,
  • Ili Najaa Aimi Mohd Nordin,
  • Ahmad Athif Mohd Faudzi,
  • Mohamed Naji Muftah and ,
  • Mohd Akmal Mhd Yusoff and
  • Shahrol Mohamaddan
  • + 1 author+ 0 author

1 March 2023

The System identification (SI) black box method is used in this study to obtain the mathematical model of a fiber braided bending actuator (FBBA) using MATLAB Simulink. Data from the system input and output are used by the black box method. Thus, the...

(This article belongs to the Section Electrical, Electronics and Communications Engineering)
  • Article
  • Open Access
8 Citations
4,106 Views
21 Pages

Reinforcement-Learning-Based Level Controller for Separator Drum Unit in Refinery System

  • Anwer Abdulkareem Ali,
  • Mofeed Turky Rashid,
  • Bilal Naji Alhasnawi,
  • Vladimír Bureš and
  • Peter Mikulecký

6 April 2023

The Basrah Refinery, Iraq, similarly to other refineries, is subject to several industrial constraints. Therefore, the main challenge is to optimize the parameters of the level controller of the process unit tanks. In this paper, a PI controller is d...

(This article belongs to the Special Issue New Trends in Mathematical Modeling, Analysis and Optimization for Engineering and Mechanics)
  • Article
  • Open Access
13 Citations
2,451 Views
21 Pages

29 November 2023

In recent years, reducing the energy consumption in a hydraulic excavator has received deep attention in many studies. The implementation of the novel independent metering valve system (NIMV) has emerged as a promising solution in this regard. Howeve...

(This article belongs to the Section E2: Control Theory and Mechanics)
  • Article
  • Open Access
20 Citations
8,377 Views
17 Pages

23 December 2016

The state-of-the-art accelerometer technology has been widely applied in space missions. The performance of the next generation accelerometer in future geodesic satellites is pushed to 8 × 10 − 13 m / s 2 / H z 1 / 2 , which is...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
17 Citations
5,124 Views
22 Pages

System Identification of Heterogeneous Multirotor Unmanned Aerial Vehicle

  • Ayaz Ahmed Hoshu,
  • Liuping Wang,
  • Shahzeb Ansari,
  • Abdul Sattar and
  • Manzoor Hyder Alias Bilal

20 October 2022

An energy efficient heterogeneous multirotor unmanned aerial system (UAS) is presented in this paper, wherein, the aerodynamical characteristics of both helicopter and quadrotor are obtained in a single multirotor design. It features the energy effic...

(This article belongs to the Section Drone Design and Development)
  • Article
  • Open Access
29 Citations
7,354 Views
17 Pages

25 June 2024

This study proposes two adaptive controllers and applies them to the vibration control of an in-wheel motor vehicle’s (electric vehicle) suspension system, in which a semi-active magnetorheological (MR) damper is installed as an actuator. As a...

(This article belongs to the Special Issue Adaptive Control Using Magnetorheological Technology)
  • Article
  • Open Access
8 Citations
1,540 Views
43 Pages

A Novel Red-Billed Blue Magpie Optimizer Tuned Adaptive Fractional-Order for Hybrid PV-TEG Systems Green Energy Harvesting-Based MPPT Algorithms

  • Al-Wesabi Ibrahim,
  • Abdullrahman A. Al-Shamma’a,
  • Jiazhu Xu,
  • Danhu Li and ,
  • Hassan M. Hussein Farh and
  • Khaled Alwesabi
  • + 1 author+ 0 author

Hybrid PV-TEG systems can harvest both solar electrical and thermoelectric power, but their operating point drifts with irradiance, temperature gradients, partial shading, and load changes—often yielding multi-peak P-V characteristics. Conventi...

(This article belongs to the Section Engineering)
  • Article
  • Open Access
10 Citations
4,037 Views
16 Pages

Designing a Robust Controller Using SMC and Fuzzy Artificial Organic Networks for Brushed DC Motors

  • Pedro Ponce,
  • J. Antonio Rosales,
  • Arturo Molina,
  • Hiram Ponce and
  • Brian MacCleery

15 June 2020

Electric direct-current (DC) drives based on DC motor are extremely important in the manufacturing process, so it must be crucial to increase their performance when they are working on load disturbances or the DC motor’s parameters change. Usua...

(This article belongs to the Section I: Energy Fundamentals and Conversion)