256 Results Found

Isomerization of aldoses to ketoses is an essential step in carbohydrate valorization routes in biorefineries to produce a wide variety of bioproducts. In this work, selective isomerization of aldoses into ketoses was investigated using different com...

The photocatalytic reduction of CO2 in aqueous media offers a sustainable route for solar-to-fuel conversion, yet remains challenged by CO2’s thermodynamic stability and kinetic inertness, low solubility, and competitive hydrogen evolution. Her...

Phosphate recovery from different second streams using electrodialysis (ED) is a promising step to a nutrients circular economy. However, the relatively low ED performance hinders the widespread adoption of this environmentally sound method. The form...

Innovative ion exchange membranes have become commercially available in recent years. However, information about their structural and transport characteristics is often extremely insufficient. To address this issue, homogeneous anion exchange membran...

This study deciphers the anionic modulation mechanism of halide ions (F−/Cl−) in cobalt-based hydroxides for oxygen evolution reaction (OER). Phase-pure Co(OH)2, Co(OH)F, and Co2(OH)3Cl were fabricated via substrate-independent hydrotherm...

This study investigated the sorption properties of the biomass of larch (LaC), pine (PiC) and spruce cones (SpC) in relation to the anionic dye Reactive Black 5 (RB5) and cationic Basic Red 46 (BR46). The scope of the study included the properties of...

One of the main challenges for environmental sciences today is the effective treatment of dye-laden industrial effluents. This work aimed to study the potential of an untreated (natural occurring clayey composite) red clay (RC) for the adsorption of...

It was shown that selected sodium phenoxide derivatives with different basicity and nucleophilicity, such as sodium p-nitrophenoxide, p-chlorophenoxide, 1-napthoxide, phenoxide and p-methoxyphenoxide, are effective initiators in anionic ring-opening...

The new symmetric acyclic N,N’-bis(1-pyrenyl) squaramide (H2L) functionalized with the pyrene moiety as a fluorogenic fragment has been designed and its ability to selectively detect specific anions and metals investigated. H2L selectively binds Cl−...

We synthesized anion exchange polymers by a reaction of chloromethylated poly(2,6-dimethyl-1,4-phenylene)oxide (PPO) with strongly basic 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD). TBD contains secondary and tertiary amine groups in the guanidine port...

A new generation of clay-based nano pigments has been introduced, providing the advantage of both inorganic pigments and organic dyes. These nano pigments have been synthesized through a stepwise procedure where, initially, an organic dye is adsorbed...

Recently, we discovered that the delocalization of nitrogen lone-pair electrons (NLPEs) in five-membered nitrogen heterocycles created a second σ-aromaticity in addition to the prototypical π-aromaticity. Such dual-aromatic compounds, such as the pen...

Five isatin anions were prepared by deprotonation of initial isatins in aprotic solvents using basic fluoride and acetate anions (F− and CH3COO−). The F− basicity is sufficient to deprotonate isatin NH hydrogen from all the studied compounds. This pr...

Owing to their strong carbazole chromophore and fluorophore, as well as to their powerful and convergent hydrogen bond donors, 1,8-diaminocarbazoles are amongst the most attractive and synthetically versatile building blocks for the construction of a...

Mixed chlorometallate ionic liquids (ILs) have been regarded as potential solvents, catalysts, and reagents for many organic processes. The acidity and basicity of these ILs were correlated with theoretically estimated parameters such as electrostati...

Five novel hydrazones derived from substituted isatins were synthesized as potential anion sensors. Using UV-VIS, FTIR, NMR and fluorescence spectroscopy, these compounds’ tautomeric equilibrium and Z-E photoisomerization were studied in DMF an...

The syntheses of two squaramide–naphthalimide conjugates (SN1 and SN2) are reported; the structures of SN1 and SN2 differ by the attachment of a squaramide—either at the ‘head’ or the ‘tail’ of the naphthalimide fl...

Brochantite was precipitated using stoichiometric amounts of CuSO4 and NaOH and characterized by scanning electron microscopy, specific surface area, thermogravimetric analysis, and zeta potential. Brochantite can be converted into paratacamite, basi...

The presence of free silanols on alkyl-bonded reversed-phase stationary phases is responsible for broad and asymmetrical peaks when basic drugs are chromatographed with conventional octadecylsilane (C18) columns due to ionic interactions. In the last...

The article presents studies on the effect of the modification method of beech sawdust on the sorption capacity of the anionic dye Reactive Black 5 (RB5) as well as the cationic dye Basic Violet 10 (BV10). In the studies, the pH value, the dose of sa...

Four molecules (L1–L4) constituted by an s-tetrazine ring appended with two identical aliphatic chains of increasing length bearing terminal morpholine groups were studied as anion receptors in water. The basicity properties of these molecules...

The synthesis of phosphate receptors represents an important avenue of research given the ubiquity of phosphate in biological and environmental systems. While many molecular scaffolds suitable for smaller anions are available either commercially or v...

A naphthalene imide (1) and a naphthalene (2) bearing two pyrrole units have been synthesized, respectively, as anion receptors. It was revealed by 1H NMR spectral studies carried out in CD3CN that receptors 1 and 2 bind various anions via hydrogen b...

An experimental laboratory set of samples of composite heterogeneous anion-exchange membranes was obtained by us for the development of our original method of polycondensation filling. Anion-exchange membranes were prepared on plasma-treated and non-...

Rhizobia produces different types of surface polysaccharides. Among them, cyclic β-(1→2)-d-glucan is located in the periplasmic space of rhizobia and plays an important role in the adaptation of bacteria to osmotic adaptation. Cyclic β...

Novel hexafluoroisopropylboranes (CF3)(CF2H)CFBH2·L and -borate anions [(CF3)(CF2H)CFBH2X]− with Lewis basic heterocyclic ligands L and the anionic substituents X = F− and CN− were obtained. The syntheses were accomplished by...

Fluorescent receptors (4a–4c) based on (thio)ureido-functionalized hexahomotrioxacalix[3]arenes were synthesised and obtained in the partial cone conformation in solution. Naphthyl or pyrenyl fluorogenic units were introduced at the lower rim o...

The synthesis of four symmetrical compounds containing urea/thiourea and anthracene/nitrobenzene groups was optimized. N,N’-Di((anthracen-9-yl)-methylene) thio-carbonohydrazide showed sensitive and selective binding ability for acetate ion among the...

We present 1,2,3-triazolium- and imidazolium-based ionic liquids (ILs) with aromatic anions as a new class of cellulose solvents. The two anions in our study, benzoate and salicylate, possess a lower basicity when compared to acetate and therefore sh...

The synthesis, structural characterization and influence of solvents on the crystal packing of solvated complexes of ethacridine with phthalic acid: 6,9-diamino-2-ethoxyacridinium phthalate methanol solvate (1), 6,9-diamino-2-ethoxyacridinium phthala...

The reaction of phenyl glycidyl ether (PGE) with 1-ethyl-3-methylimidazolium acetate and 1-ethyl-3-methylimidazolium thiocyanate to initiate the polyetherification reaction was examined using thermal and spectral analysis techniques. The influence of...

Direct dyes are still widely used for coloring a variety of materials due to their ease of use and the wide range of colors available at a moderate cost of production. In the aquatic environment, some direct dyes, especially the azo type and their bi...

Anion-exchange membranes modified with a polyquaternium-22 (PQ-22) polymer were studied for their use in electrodialysis. The use of PQ-22 for modification makes it possible to “replace” weakly basic amino groups on the membrane surface w...

Anionic lipid membrane electrostatic potential and solution pH can influence cationic peptide adsorption to these bilayers, especially those containing simultaneously acid and basic residues. Here, we investigate the effects of the pH solution on MP1...

Crystalline hematite nanoparticles as adsorbents for anionic Congo red dye were prepared by a hydrothermal process using urea hydrolysis. To examine the effects of coexisting anions in a solution on the formation of hematite nanoparticles, different...

Reversed-phase liquid chromatography (RPLC) relies on a non-polar stationary phase and a more polar hydro-organic mobile phase, where compound retention is primarily governed by hydrophobicity, with more hydrophobic compounds being retained longer. T...

Al–Si–Cu alloy is one of the aluminum die-cast alloys widely used in industry. Due to the presence of Si and Cu elements in the Al–Si–Cu alloy, the corrosion resistance of the Al–Si–Cu alloy is lowered. Thus, devel...

Rearrangements of o-tolyl aryl ethers, amines, and sulfides with the Grubbs–Stoltz reagent (Et3SiH + KOtBu) were recently announced, in which the ethers were converted to o-hydroxydiarylmethanes, while the (o-tol)(Ar)NH amines were transformed into d...

The paper is devoted to the plasticization mechanisms of alkali-activated cement system Na2O-CaO-Al2O3-SiO2-H2O. The fundamentals and basic factors determining the effectiveness of plasticizing surfactants for alkali-activated cement materials are di...

Lack of safe water availability and access to clean water cause a higher risk of infectious diseases and other diseases as well. Heavy metals (HMs) are inorganic pollutants that cause severe threats to humans, animals, and the environment. Therefore,...

Anion-driven, nanoscale polar–apolar structural organization is investigated in a solvate ionic liquid (SIL) setting by comparing sulfonate-based anions with long and short perfluorinated alkyl chains. Representative SILs are created from 1,2-b...

Trichlorosilane (SiHCl3) is an important raw material for preparing solar cells and semiconductor chips in the Siemens method. Since the boiling points of SiHCl3 and methyldichlorosilane (CH3SiHCl2) are close to each other, it is difficult to remove...

A water-soluble cyclophane dimer having two disulfide groups as a reduction-responsive cleavable bond as well as several acidic and basic functional groups as a pH-responsive ionizable group 1 was successfully synthesized. It was found that 1 showed...

Solution V K-edge XANES (X-ray absorption near edge structure) and EXAFS (extended X-ray absorption fine structure) analysis of vanadium(V) complexes containing both imido ligands and anionic ancillary donor ligands (L) of type, V(NR)(L)X2 (R = Ar, A...

Ternary layered gadolinium-europium-terbium basic chlorides were synthesised using a facile hydrothermal-microwave technique. A continuous series of solid solutions was obtained in a full range of rare earth concentrations. To sensitise the luminesce...

Chronic wounds, depending on the bacteria that caused the infection, can be associated with an extreme acidic or basic pH. Therefore, the application of pH-responsive hydrogels has been instigated for the delivery of therapeutics to chronic wounds. H...

A novel anion exchange resin AEE-3 was synthesized by N-alkylation of a weakly basic polyacrylic anion exchanger D311 with 1-bromopropane to effectively remove nitrate (NO3−-N) from aqueous solution. The related finding revealed that its adsorp...

The development of cathode materials with high specific capacity is the key to obtaining high-performance lithium-ion batteries, which are crucial for the efficient utilization of clean energy and the realization of carbon neutralization goals. Li-ri...

Polyhydroborate salts represent the important class of energy materials attracting significant recent attention. Some of these salts exhibit promising hydrogen storage properties and/or high ionic conductivities favorable for applications as solid el...

Solvation properties are key for understanding the interactions between solvents and solutes, making them critical for optimizing chemical synthesis and biochemical applications. Designable solvents for targeted optimization of these end-uses could,...