Thermal treatment is the most popular decontamination technique used in the dairy industry to ensure food protection and prolong shelf life. But it also causes nutrient and aroma degradation, non-enzymatic browning, and organoleptic changes of dairy...
Viruses on some foods can be inactivated by exposure to ultraviolet (UV) light. This green technology has little impact on product quality and, thus, could be used to increase food safety. While its bactericidal effect has been studied extensively, l...
The sensitivity of silicon nanopillar array for relative humidity (RH) with UV illumination was investigated in this work. The silicon nanopillar array was prepared by nanosphere lithography. Electrical measurements were performed on its sensing perf...
We employed ultra-violet (UV) light treatment on the TiO2 layer prior to coating the perovskite layer to improve the solar conversion efficiency of perovskite solar cells (PSCs). A laboratory-made UV treatment system was equipped with various UV ligh...
The size of current microwave-driven UV lamps limits their direct application in dental light curing. This article proposes a coaxial structure to miniaturize the UV lamp. First, the Drude model and the finite difference time domain algorithm were us...
Nitric oxide (NO2) is one of the air pollutants that pose serious environmental concerns over the years. In this study, SnO2 nanowires were synthesized by evaporation-condensation method and graphene oxide were synthesized using modified Hummers meth...
Here we report on the use of pulsed UV light for activating the gas sensing response of metal oxides. Under pulsed UV light, the resistance of metal oxides presents a ripple due to light-induced transient adsorption and desorption phenomena. This met...
Background: SARS-CoV-2 continues to impact human health globally, with airborne transmission being a significant mode of transmission. In addition to tools like vaccination and testing, countermeasures that reduce viral spread in indoor settings are...
It is well known that ultraviolet (UV) and blue light cause a series of health problems and damages to polymer materials. Therefore, there are increasing demands for UV-blue light-shielding. Herein, a new type of iron-doped titania (Fe-TiO2) nanopart...
This review summarizes studies of protection against singlet oxygen and radical damage by carotenoids. The main focus is on how substitutions of the carotenoid molecules determine high antioxidant activities such as singlet oxygen quenching and radic...
The effects of supplemental UV-A (385 nm) period and UV-A intensity for 5 days before harvest (DBH) on growth, antioxidants, antioxidant capacity, and glucosinolates contents in Chinese kale (Brassica oleracea var. alboglabra Bailey) were studied in...
The potential extensive application of graphene oxide (GO) in various fields results in the possibility of its release into the natural environment with negative impacts on humans and the ecosystem. The UV-induced removal behavior of aqueous GO was e...
Background/Objectives: Corneal oedema is known for changing the cornea’s optical properties, particularly its ability to transmit ultraviolet (UV) light, which is crucial for visual clarity and eye health. This study explores how changes in cor...
Neutrophils release decondensed chromatin or extracellular traps (NETs) in response to various physiological and pharmacological stimuli. Apart from host defensive functions, NETs play an essential role in the pathogenesis of various autoimmune, infl...
The synthesized LaFeO3 nanocrystalline sensor powders show positive response to sensing acetone vapor at 200 °C. The responses to acetone vapor (at 0.5, 1, 2, 5, 10 ppm) are 1.18, 1.22, 1.89, 3.2 and 7.83. To make the sensor operate at a lower op...
The impact-ionization-enhanced mechanism is introduced into a SiC light-triggered thyristor (LTT) to improve its switching speed under weak UV illumination. The effects of impact ionization on photogenerated carrier multiplication and the dynamic swi...
Here, ultraviolet light-emitting diodes (UV-LED) combined with TiO2 was used to investigate the feasibility of carbamazepine (CBZ) degradation. The effects of various factors, like crystal form of the catalyst (anatase, rutile, and mixed phase), mass...
10 March 2022
Background: The reprocessing of medical devices has become more complex due to increasing hygiene requirements. Previous studies showed satisfactory bactericidal disinfection effects of UV-C light in rigid and flexible endoscopes. Especially in the c...
Different light-based strategies have been investigated to inactivate viruses. Herein, we developed an HIV-based pseudotyped model of SARS-CoV-2 (SC2) to study the mechanisms of virus inactivation by using two different strategies; photoinactivation...
The influence of UV light and non-thermal plasma on the osseointegration of yttria-stabilized zirconia implants (Y-TZP) comparing the two methods is unclear. The aim of this study was to show the influence of these methods on the osseointegration of...
Pseudomonas fluorescens is one of the first colonizers of bacterial biofilm in water systems and a member of opportunistic premise plumbing pathogens (OPPPs). The aim of this study was to examine the effect of UV light and sodium hypochlorite on the...
In this study, potassium ferrocyanide, a nontoxic cyanide precursor in dark and diffuse reflection environment, was applied as reagent for the leaching of gold. The free cyanide ions could gradually release from potassium ferrocyanide solution under...
The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic has completely disrupted people’s lives. All over the world, many restrictions and precautions have been introduced to reduce the spread of coronavirus disease 2019 (COVI...
A protocol for the covalent biofunctionalization of silicon-based biosensors using a UV light-induced thiol–ene coupling (TEC) reaction has been developed. This biofunctionalization approach has been used to immobilize half antibodies (hIgG), w...
CsPbCl3 perovskite is attracting increasing interest in ultraviolet (UV) detection due to its optical band gap and superior intrinsic optoelectronic properties. In this study, a novel one-step magnetron sputtering technique was applied for fabricatin...
A palladium (Pd) doped mesoporous titanium dioxide (TiO2) photocatalyst was used to produce hydrogen (H2) via water splitting under both near-UV and visible light. Experiments were carried out in the Photo-CREC Water-II Reactor (PCW-II) using a 0.25...
Ca2+-dependent gene regulation controls several functions to determine the fate of the cells. Proteins of the nuclear factor of activated T-cells (NFAT) family are Ca2+ sensitive transcription factors that control the cell growth, proliferation and i...
Supported Pd-based catalyst over active nickel oxide (NiO) was repared using the impregnation method companying with UV-light irradiation. Moreover, the catalytic performance of the obtained Pd-based catalysts was evaluated towards the hydrogenation...
This study explored the design of an innovative stereoselective S-(-)-limonene sensor according to the molecular imprinting polymer (MIP) strategy using UV light to generate in situ polymer cross-linking. A conductive composite nanofibrous fabric of...
Zinc oxide (ZnO) nanowires (NWs) are wide-bandgap semiconductors that absorb ultraviolet (UV) radiation. Various post-treatment processes have been studied to improve the optical properties of the as-grown ZnO NWs. Among them, Ag nanoparticles (NPs)...
Fungus gnats (Sciaridae) are one of the most devastating pests on mushroom farms. Generally, they are controlled using relatively inefficient physical means, like sticky or pheromone traps, or with chemical pesticides. Here, we have proposed an integ...
Lignin is a natural light-coloured ultraviolet (UV) absorber; however, conventional extraction processes usually darken its colour and could be detrimental to its UV-shielding ability. In this study, a sustainable way of fabricating lignin–cell...
Photocatalytic hydrogen production via water splitting using a noble metal on a TiO2 is a technology that has developed rapidly over the past few years. Specifically, palladium doped TiO2 irradiated with near-UV or alternatively with visible light ha...
Lead-free piezoelectric materials are essential for our healthy future but offer lower performance than lead-based materials. Different material combinations are explored to improve the performance of lead-free materials. By filling the UV light cura...
Clostridioides difficile is widely recognised as one of the most common causes of healthcare-associated C. difficile infections due to the ability of spores to survive for prolonged periods in the hospital environment. This study aimed to evaluate th...
Oat is a food and forage crop species widely cultivated worldwide, and it is also an important forage grass in plateau regions of China, where there is a high level of ultraviolet radiation and sunlight. Screening suitable reference genes for oat und...
The physiological, biochemical, and morphometric responses of two lettuce cultivars (Lactuca sativa L.), Gypsy and Pomegranate Lace, which differ in terms of leaf morphology and anthocyanin pigmentation, were examined under moderate light (290 µ...
It is of great significance to develop carbon quantum dots (CQDs) using green carbon sources, which are cheap, non-toxic and harmless, and further expand their application scopes, e.g., fluorescence sensors, blue light screening. In this study, we ha...
ZnO/ZnS nanocomposite-based nanostructures exhibit dual light and gas sensing capabilities. To further boost the light/dual sensing properties, gold nanoparticles (Au NPs) were incorporated into the core-shell structures. Multiple material characteri...
UV light-assisted gas sensors based on metal oxide semiconductor (MOS) have attracted much attention in detecting flammable and explosive gases at room temperature. In this paper, graphite-based carbon nitride (g-C3N4) nanosheets-decorated ZnO porous...
The popularity of using the photopolymerization reactions in various areas of science and technique is constantly gaining importance. Light-induced photopolymerization is the basic process for the production of various polymeric materials. The key ro...
Ti3C2-MXene material, known for its strong electronic conductivity and optical properties, has emerged as a promising alternative to noble metals as a cocatalyst for the development of efficient photocatalysts used in environmental cleanup. In this s...
The degradation rates of formic acid and lactic acid in the presence and absence of H2O2 were studied, utilizing several TiO2 catalysts: PC105 (100% anatase), MPT 625 (100% rutile), and P25 (80% anatase/20% rutile), and the results were discussed wit...
Ultraviolet B (UVB) in sunlight is known to promote health when humans are exposed to optimum sunlight. Proper exposure to ultraviolet B is essential to produce vitamin D in the body, which is a particularly important factor for health. However, ther...
There is a need for highly efficient photocatalysts, particularly for water purification. In this study, we fabricated a mesoporous TiO2 thin film on a boron-doped diamond (BDD) layer by a surfactant-assisted sol-gel method, in which self-assembled a...
N-doped TiO2 (N-TiO2) and N-doped ZnO (N-ZnO) were synthesized utilizing ammonia as a dopant source. The chemico-physical characteristics of synthesized samples were studied by Raman spectroscopy, X-ray diffraction, SEM analysis, N2 adsorption–...
Pulsed light (PL) is a novel, non-thermal technology being used to control the microbial spoilage of foods and beverages. Adverse sensory changes, commonly characterized as “lightstruck”, can occur in beers when exposed to the UV portion...
Silver nanoparticles (Ag-NPs) were successfully synthesized using the UV irradiation of aqueous solutions containing AgNO3 and gelatin as a silver source and stabilizer, respectively. The UV irradiation times influence the particles’ diameter of the...
The first part of the study shows that four commercial sun protection SPF 50 products provide statistically significant (all p < 0.021) protection by reducing the amount of UV-induced mitochondrial (mtDNA) damage in human dermal fibroblast skin ce...
When stainless steel is implanted in human bodies, the corrosion resistance and biocompatibility must be considered. In this study, first, a protective organic silicone film was coated on the surface of stainless steel by a plasma deposition techniqu...
of 119