The Turkevich synthesis method of Au nanoparticles (AuNPs) was adopted for direct fabrication of SiO2@Au and TiO2@Au core-shell nanostructures. In this method, chloroauric acid was reduced with trisodium citrate in the presence of amine-functionalize...
In this study, gold nanoparticles (AuNPs) were synthesized using the Turkevich method. This article explains the didactic step-by-step synthesis, showing pictures of the entire process, including a well-explained mechanism and characterization study....
Gold nanoparticles (GNPs) are commonly synthesized using the Turkevich method, but there are limitations on the maximum concentration of gold nanoparticles that can be achieved using this method (often < 1 mM (=0.34 mg/mL) gold precursor loading)....
ZnO nanostructures decorated with gold nanoparticles (Au-NPs) were synthesized by thermal decomposition of ZnO2 powders and their subsequent impregnation of metal nanoparticles using either the Direct Turkevich Method, the Inverse Turkevich Method, o...
This work presents the synthesis of Au nanoparticles from gold coatings recovered from processor pins with minimal waste generation. The process consisted of four main steps: (1) physical recovery of pins, (2) recovery of gold coatings by acid digest...
Poly(vinylidene fluoride) (PVDF) nanocomposites were fabricated by incorporating BaTiO3 nanoparticles (particle size of ~100 nm, nBT), which were deposited by Au nanoparticles (nAu) with an average particle size of 17.8 ± 4.0 nm using a modifi...
Gold nanoparticles (AuNPs) were synthesized using citrate reduction, also known as the Turkevich method. The AuNPs were compared with the commercially available product and later subjected to characterization. The AuNPs were 13 nm in diameter with a...
By adjusting the synthesis process, silver nanoparticles (AgNp) of various shapes, sizes, and structures can be obtained, all of which have a substantial impact on the biological effect, notably, the regulation of antibacterial activity in the presen...
Flexible dielectric polymer composites have been of great interest as embedded capacitor materials in the electronic industry. However, a polymer composite has a low relative dielectric permittivity (ε′ < 100), while its dielectric loss tangent is...
Gold nanoparticles (AuNPs) exhibit unique properties that make them appealing for applications in biosensing and other emerging fields. Despite the availability of numerous synthesis methods, important questions remain to be addressed regarding the v...
Plasmonic gold nanoparticles significantly improved the efficiency of a TiO2 and Eosin Y based dye-sensitized solar cell from 2.4 to 6.43%. The gold nanoparticles’ sizes that were tested were 14 nm, 30 nm and 40 nm synthesized via the systemati...
Relevant properties of gold nanoparticles, such as stability and biocompatibility, together with their peculiar optical and electronic behavior, make them excellent candidates for medical and biological applications. This review describes the differe...
With the spread of deadly diseases worldwide, the design of rapid tests to identify causative microorganisms is necessary. Due to the unique properties of gold nanoparticles, these nanoparticles are used in designing rapid diagnostic tests, such as s...
Given the high toxicity and carcinogenic properties of pesticides, reducing pesticide residues is crucial for mitigating water pollution and promoting sustainable development. In the present study, a novel colorimetric method using gold nanoparticles...
In this work, gold NPs were prepared by the Turkevich method, and their interaction with HPV and cancerous cervical tissues were studied by scanning electron microscopy, energy-dispersive x-ray spectroscopy, confocal and multiphoton microscopy and SE...
The Turkevich method was optimized to prepare gold nanoparticles (AuNP) stabilized by polyethyleneglycol (PEG) for µCT. Using various independent modalities, we thoroughly characterized the optimized PEG-AuNPs. Here, we show that PEG-AuNPs are...
Bandages, gauzes, and alcoholic pads have been widely used for wound healing. However, bacterial infection in wounds is still a major problem and needs to be explored. Apart from antibacterial activity, the hydrophilicity of a membrane is also a majo...
Antibody–nanoparticle conjugates are widely used analytical reagents. An informative parameter reflecting the conjugates’ properties is the number of antibodies per nanoparticle that retain their antigen-binding ability. Estimation of this parameter...
The aim of this research is to define optimal conditions to improve the stability of gold and silver nanoparticles’ anti-zearalenone antibody conjugates for their utilisation in lateral flow immunochromatographic assay (LFIA). The Turkevich&nda...
Surface decoration by means of metal nanostructures is an effective way to locally modify the electronic properties of materials. The decoration of ZnO nanorods by means of Au nanoparticles was experimentally investigated and modelled in terms of ene...
The use of high catalyst loading is required for most of the organocatalyzed asymmetric aldol reactions in organic synthesis, and this often presents challenges during purification and difficulties in catalyst recovery from the reaction mixture. The...
(1) Background: Chitosan-coated gold nanoparticles (CH-AuNPs) have important theranostic applications in biomedical sciences, including cancer research. However, although cell cytotoxicity has been studied in cancerous cells, little is known about th...
An original voltammetric sensor (Au-gr/CVE) based on a carbon veil (CV) and phytosynthesized gold nanoparticles (Au-gr) was developed for ascorbic acid (AA) determination. Extract from strawberry leaves was used as source of antioxidants (reducers) f...
A non-motile bacterium, Mycobacterium tuberculosis (Mtb), causes tuberculosis (TB), an infection of the lower respiratory tract. Currently, rifampicin, isoniazid, ethambutol, and pyrazinamide are used as first-line treatment for drug-susceptible TB f...
The use of lateral flow immunoassays (LFIAs) for rapid on-site testing is restricted by their relatively high limit of detection (LoD). One possible way to decrease the LoD is to optimize nanoparticle properties that are used as labels. We compare tw...
Surface-functionalized gold-coated superparamagnetic iron oxide nanoparticles (Au-SPIONs) may be a useful tool in various biomedical applications. To obtain Au-SPIONs, gold salt was precipitated onto citrate-stabilized SPIONs (Cit-SPIONs) using a sim...
A new colorimetric sensor based on gold/silver bimetallic nanoparticles (Au–Ag BNPs) for the sensitive and selective detection of mercury (II) was developed. Gold nanoparticles (AuNPs) were synthesized by Turkevich method. The surface modificat...
The main challenges in developing zeolites as cosmetic drug delivery systems are their cytotoxicities and the formation of drug-loading pore structures. In this study, Au-decorated zeolite nanocomposites were synthesized as an epidermal delivery syst...
Developing highly efficient Au/TiO2/WO3 heterostructures with applications in heterogeneous photocatalysis (photocatalytic degradation) and surface-enhanced Raman spectroscopy (dye detection) is currently of paramount significance. Au/TiO2/WO3 hetero...
The cell interaction, mechanism of cell entry and intracellular fate of surface decorated nanoparticles are known to be affected by the surface density of targeting agents. However, the correlation between nanoparticles multivalency and kinetics of t...
Electrochemical application has been widely used in the study of biosensors. Small biomolecules need a sensitive sensor, as the transducer that can relay the signal produced by biomolecule interactions. Therefore, we are improvising a sensor electrod...
The current study reports on the development of a rapid and cost-effective TB-antigen diagnostic test for the detection of Mycobacterium biomarkers from non-sputum-based samples. Two gold nanoparticle (AuNP)-based rapid diagnostic tests (RDTs) in the...
In this study, TiO2 nanowires on TiO2 nanotubes arrays (TNWs/TNAs) and Au-decorated TNWs/TNAs nanostructures are designed and fabricated as a new type of photoanode for photoelectrochemical (PEC) water splitting. The TNWs/TNAs were fabricated on Ti f...
Radiotherapy (RT) involves delivering X-ray beams to the tumor site to trigger DNA damage. In this approach, it is fundamental to preserve healthy cells and to confine the X-ray beam only to the malignant cells. The integration of gold nanoparticles...