Skip to Content

100 Results Found

  • Article
  • Open Access
7 Citations
4,804 Views
14 Pages

13 May 2023

The new Eurocode 2 provides valuable information on the required concrete cover to protect reinforcement against corrosion induced by carbonation, for two design service life values of 50 and 100 years. However, to design structures with an even long...

(This article belongs to the Special Issue Advanced Concrete and Construction Materials)
  • Article
  • Open Access
34 Citations
5,573 Views
24 Pages

Effect of Shape, Number, and Location of Openings on Punching Shear Capacity of Flat Slabs

  • Ekkachai Yooprasertchai,
  • Yonlada Tiawilai,
  • Theerawee Wittayawanitchai,
  • Jiranuwat Angsumalee and ,
  • Panuwat Joyklad and
  • Qudeer Hussain
  • + 1 author+ 0 author

17 October 2021

Experimental evidence have proved that punching shear capacity of flat slabs deteriorate with the presence of openings located within the critical perimeter around columns. It is understood that this deterioration varies inversely with the distance o...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
435 Views
26 Pages

Temperature-Based Design Method for Concrete Cone Failure Under Fire Conditions

  • Nicolas Pinoteau,
  • Kresimir Nincevic,
  • Kenton McBride,
  • Killian Regnier and ,
  • Antoine Labbé and
  • Roberto Piccinin
  • + 1 author+ 0 author

16 July 2026

This paper introduces a temperature-based design method for determining the tensile concrete cone capacity of anchors subjected to fire exposure. Current prescriptive approaches, most notably Eurocode 2, rely solely on embedment depth and fire durati...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
69 Views
21 Pages

17 November 2026

In the current paper, an investigation into the influence of the size effect on the shear strength of unreinforced concrete beams using a data-driven approach including statistical analysis, calibration, and prediction is carried out. The database co...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
598 Views
32 Pages

25 September 2026

Reinforced concrete flat slab design commonly relies on a fragmented workflow: finite element models are built through graphical interfaces, reinforcement demands are manually interpreted, and code-compliance checks are performed separately. This fra...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
8 Citations
4,076 Views
17 Pages

13 March 2021

Recycled aggregate concrete is a solution used to minimize the environmental impact of the concrete industry. Notwithstanding research worldwide validating structural applications of recycled aggregate concrete, specific design guidelines are lacking...

(This article belongs to the Special Issue Sustainable Composites with Solid Waste Materials)
  • Article
  • Open Access
3 Citations
4,167 Views
24 Pages

3 November 2020

The scope of the paper is to propose a method for determining the size of shear caps in a slab–column-connections-reinforced concrete structure. Usually, shear heads are used to enhance slab–column connection, especially when the transver...

(This article belongs to the Special Issue Advances in Construction and Building Materials)
  • Article
  • Open Access
15 Citations
4,914 Views
16 Pages

11 August 2020

In the recent years, bridges, as an important part of the national and international infrastructure, had to comply with stricter requirements due to increased heavy load traffic. Many of these bridge structures built in the 1960s and 1970s often cont...

(This article belongs to the Special Issue Recent Advances in Testing and Modelling Reinforced Concrete Structures)
  • Article
  • Open Access
295 Views
35 Pages

28 September 2026

Reinforced concrete subjected to restrained imposed strains exhibits a cracking response governed by the interaction between concrete tensile behaviour, reinforcement–concrete bond transfer, crack-spacing development, reinforcement stress, and...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
6 Citations
4,888 Views
22 Pages

11 December 2021

Limited deflection of structural members represents an important requirement to guarantee proper functionality and appearance of building and infrastructures. According to Eurocodes, this requirement is ensured by limiting the maximum deflection of h...

(This article belongs to the Special Issue Mechanical Behavior of Concrete Materials and Structures: Experimental Evidence and Analytical Models)
  • Article
  • Open Access
1 Citations
1,076 Views
39 Pages

Adequacy of Standard Models for Long-Term Behavior of Lightweight Concrete with Sintered Aggregate Under Cyclic Loading

  • Paweł M. Lewiński,
  • Zbigniew Fedorczyk,
  • Przemysław Więch and
  • Łukasz Zacharski

23 December 2025

This paper presents an experimental determination of the long-term mechanical properties of lightweight concrete with sintered aggregate under cyclic loading and the corresponding analytical standard models. The research was designed around two concr...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
7 Citations
4,079 Views
22 Pages

Evaluation of Web Shear Design Procedures for Precast Prestressed Hollow Core Slabs

  • Ahmed K. El-Sayed,
  • Abdulaziz I. Al-Negheimish,
  • Abdulrahman M. Alhozaimy and
  • Mohammed A. Al-Saawani

22 December 2022

Precast, prestressed hollow core slabs (HCS) are commonly used by the construction industry for floor and roof systems worldwide. Generally, the web shear strength governs the shear design of such members. This is because the web width resisting shea...

(This article belongs to the Special Issue Advanced Studies on Strength and Cracking of Prestressed and Reinforced Concrete Structures)
  • Article
  • Open Access
15 Citations
10,241 Views
19 Pages

Optimization Design of RC Elevated Water Tanks under Seismic Loads

  • Francisco J. Martínez-Martín,
  • Víctor Yepes,
  • Fernando González-Vidosa,
  • Antonio Hospitaler and
  • Julián Alcalá

1 June 2022

This paper deals with the seismic column design of 35 elevated RC water storage tanks. Tanks comprise a top conic trunk reservoir, a column with variable hollow square cross-sections, and a shallow foundation on a sand layer. The five-column heights...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
2 Citations
1,222 Views
19 Pages

This study investigates the shear behavior of steel truss ceramsite concrete composite interfaces through double-sided direct shear tests and finite element simulations. The results reveal three distinct shear response phases: elastic deformation, pl...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
8 Citations
3,488 Views
21 Pages

1D Finite Element Modeling of Bond-Slip Behavior and Deflection in Reinforced Concrete Flexural Members

  • Rahaf Mohamad,
  • George Wardeh,
  • Mayada Al Ahmad Al Kousa and
  • Ali Jahami

18 June 2025

The serviceability limit state (SLS) is a crucial aspect of structural design, ensuring that reinforced concrete structures perform satisfactorily under everyday loading conditions without excessive deflections, vibrations, or cracking that could com...

(This article belongs to the Special Issue Sustainable Construction: Innovations in Design, Engineering, and the Circular Economy)
  • Article
  • Open Access
2 Citations
2,898 Views
19 Pages

23 October 2024

This paper presents a detailed analytical approach for the bending analysis of reinforced concrete beams, integrating both structural mechanics principles and Eurocode 2 provisions. The general analytical expressions derived for the curvature were ap...

(This article belongs to the Special Issue Computational Mechanics and Applied Mathematics)
  • Article
  • Open Access
1 Citations
1,863 Views
36 Pages

24 October 2025

In low to medium-seismicity countries, seismic design is often not mandatory. Furthermore, zoning is frequently adopted to justify simplified calculations based on force methods without capacity criteria. However, risk analysis should merge vulnerabi...

(This article belongs to the Special Issue Research on the Seismic Performance of Reinforced Concrete Structures)
  • Article
  • Open Access
2 Citations
1,455 Views
15 Pages

Resistance of Steel Sections (Classes 1 to 4) Including Bimoment Effects

  • Antonio Aguero,
  • Robert Glauz,
  • Ana Almerich-Chulia,
  • Yvona Kolekova and
  • Pedro Martin-Concepcion

28 October 2025

This article investigates the structural resistance of thin-walled steel sections classified as Classes 1 to 4 under Eurocode 3. The study focuses on flexural capacity, and takes into consideration the effects of local buckling and the bimoment. Alth...

(This article belongs to the Special Issue Advanced Studies in Steel Structure)
  • Article
  • Open Access
2,290 Views
14 Pages

Evaluating Pull-Out Behavior of Timber Connections: A Comparison of Dowelled Joints and Axially Loaded Screws

  • Haksung Lee,
  • Man-Kwon Choi,
  • Bo-Seong Seo,
  • Young-Seok Cho and
  • Byung-Joo Kim

24 October 2024

This study examines the pull-out behavior of timber elements connected using dowelled joints (type 1) and axially loaded screws (type 2), focusing on numerical predictions and experimental validation under various conditions. Different screw diameter...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
10 Citations
2,921 Views
16 Pages

23 July 2021

The severity of vertical seismic ground motions is often factored into design regulations as a component of their horizontal counterparts. Furthermore, most design codes, including Eurocode 8, ignore the impact of local soil on vertical spectra. This...

(This article belongs to the Special Issue Seismic Geotechnical Hazards Studies)
  • Article
  • Open Access
1,935 Views
18 Pages

1 September 2025

The new generation of Eurocode standards has prompted enquiries regarding the major distinctions from the current version, particularly in relation to the application of the N2 method. A substantial change has been made to the definition of elastic s...

(This article belongs to the Special Issue Innovative Approaches in Earthquake and Structural Engineering: Resilience, Performance, and Sustainability)
  • Article
  • Open Access
4 Citations
4,468 Views
19 Pages

24 August 2024

This study investigates five cases of municipal solid waste (MSW) landfill slope failures in the USA, China, Sri Lanka, and Greece, with the aim of assessing the safety margins and reliability of these slopes. The stability and reliability of the lan...

  • Article
  • Open Access
18 Citations
7,308 Views
15 Pages

13 June 2020

The proper distribution of prestressing force (PF) is the basis for the design of prestressed concrete (PSC) structures. However, the PF distribution obtained by predictive equations of prestress losses has not been sufficiently validated by comparis...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
3 Citations
2,094 Views
16 Pages

PGA Estimates for Vertical Ground Motion and Varying Deep Geology Site Surroundings—A Case Study of Banja Luka

  • Borko Bulajić,
  • Silva Lozančić,
  • Senka Bajić,
  • Anka Starčev-Ćurčin and ,
  • Miloš Šešlija,
  • Miljan Kovačević and
  • Marijana Hadzima-Nyarko
  • + 2 authors+ 0 author

10 June 2025

Vertical PGA is frequently included in civil engineering regulations simply by multiplying the horizontal PGA by a constant. Moreover, most design codes, including Eurocode 8, do not consider the impact of the local soil on vertical ground motion at...

(This article belongs to the Special Issue Intelligent Technologies in Geotechnical Engineering and Geological Hazards)
  • Article
  • Open Access
8 Citations
6,415 Views
10 Pages

Combination of Permanent and Variable Load Is Dependent

  • Tuomo Poutanen,
  • Sampsa Pursiainen and
  • Tim Länsivaara

13 May 2021

This study concerns the combination of the permanent and the variable loads in the structural design. The Eurocodes are used as a reference. Three new findings are presented: (1) In each physical structure, and in every load pair of the permanent loa...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
18 Citations
7,523 Views
18 Pages

Assessment of Lightweight Concrete Thermal Properties at Elevated Temperatures

  • Juan Enrique Martínez-Martínez,
  • Felipe Pedro Álvarez Rabanal,
  • Mariano Lázaro,
  • Mar Alonso-Martínez and ,
  • Daniel Alvear and
  • Juan José del Coz-Díaz
  • + 1 author+ 0 author

26 October 2021

Structural lightweight concrete (LWC) has recently acquired research importance because of its good thermal insulation properties. However, there is a lack of knowledge about its thermal properties at elevated temperatures. The thermal properties, su...

  • Article
  • Open Access
57 Citations
10,332 Views
23 Pages

28 November 2019

For shear-critical structural elements where the use of stirrups is not desirable, such as slabs or beams with reinforcement congestion, steel fibers can be used as shear reinforcement. The contribution of the steel fibers to the shear capacity lies...

(This article belongs to the Special Issue Steel Fibre Reinforced Concrete Behaviour)
  • Article
  • Open Access
8 Citations
3,183 Views
26 Pages

Predicting Crack Width in CFRP-Strengthened RC One-Way Slabs Using Hybrid Grey Wolf Optimizer Neural Network Model

  • Seyed Vahid Razavi Tosee,
  • Iman Faridmehr,
  • Moncef L. Nehdi,
  • Vagelis Plevris and
  • Kiyanets A. Valerievich

3 November 2022

This study deploys a hybrid Grey Wolf Optimizer Neural Network Model for predicting the crack width in reinforced concrete slabs strengthened with carbon fiber-reinforced polymers (CFRP). Reinforced concrete (RC) one-way slabs (1800 × 400 × 120 mm in...

  • Article
  • Open Access
398 Views
23 Pages

26 June 2026

Anchored bored pile walls are widely used to control deformation in deep urban excavations, but their serviceability performance depends on soil stiffness, excavation depth, wall stiffness, anchor configuration, construction staging, groundwater cond...

(This article belongs to the Section Construction Management, and Computers & Digitization)
  • Article
  • Open Access
13 Citations
3,907 Views
18 Pages

20 September 2024

Eurocode 8 is undergoing a revision process encompassing novel ductility classes, damage limitation limits, local ductility conditions corresponding to detailing prescriptions and structural irregularity criteria. In this paper, we specifically asses...

(This article belongs to the Special Issue Research on the Seismic Performance of Reinforced Concrete Structures)
  • Article
  • Open Access
3 Citations
2,673 Views
12 Pages

Simulation-Based Investigations of the Load-Bearing Behavior of Concrete Hollow Sphere Slabs Exposed to Fire

  • Olga Miller,
  • Oliver Gericke,
  • David Nigl,
  • Daria Kovaleva and
  • Lucio Blandini

22 November 2022

This paper concerns the investigations of the flexural capacity of concrete slabs with integrated concrete hollow spheres that are subjected to fire and their mass saving potential compared to solid slabs. (1) Background: The overuse of concrete in c...

(This article belongs to the Special Issue Structures in Fire: Focus on Steel and Composite Structures)
  • Article
  • Open Access
445 Views
28 Pages

This study experimentally investigated the punching shear behavior of engineered cementitious composite flat-plate slabs incorporating cement kiln dust and crumb rubber. The considered criteria included replacing 50% of the rubber without treatment a...

  • Article
  • Open Access
22 Citations
3,706 Views
16 Pages

15 January 2020

The article describes the selected methods of calculating the deflection of steel fiber reinforced concrete beams. Additionally, the results of the study on the deflection of steel fiber reinforced concrete beams based on waste sand are presented. Th...

(This article belongs to the Special Issue Research of Structure and Properties of Concretes Based on Non-conventional Aggregates)
  • Article
  • Open Access
520 Views
23 Pages

29 June 2026

Early-stage structural design requires rapid exploration of large design spaces, where the initial sizing of reinforced concrete members shapes downstream material use, cost, and the number of design iterations. Conventional predimensioning relies on...

(This article belongs to the Special Issue Selected Papers from the 20th International Conference on Computing in Civil and Building Engineering (ICCCBE 2024))
  • Article
  • Open Access
9 Citations
11,563 Views
12 Pages

The present study investigates the potential of the implementation of machine learning techniques in optimized multi storey reinforced concrete frames. The variables that are taken into account in the objective function of the optimization problem ar...

(This article belongs to the Special Issue Concrete Structures: Present and Future Trends)
  • Article
  • Open Access
73 Citations
8,716 Views
14 Pages

Physical and Mechanical Properties of Fly Ash Based Geopolymer Concrete Compared to Conventional Concrete

  • Nikolaos Nikoloutsopoulos,
  • Anastasia Sotiropoulou,
  • Glikeria Kakali and
  • Sotirios Tsivilis

The potential of applying geopolymerization to a wide range of solid industrial waste and by-products is of great interest. In this research, the physical and mechanical properties of fly ash (FA)-based geopolymer concrete (GC), compared to those of...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
2 Citations
2,833 Views
19 Pages

Study of Innovative Connector for Steel–Concrete Composite Structures

  • Anna Derlatka,
  • Piotr Lacki,
  • Paweł Kania and
  • Shan Gao

3 April 2024

The paper presents an analysis of the innovative connector for manufacturing a steel–concrete composite beam. The connector consists of a corrugated metal sheet in the shape of a dovetail and shot nails. The nails are shot through the sheet fol...

(This article belongs to the Special Issue Current Technological, Methodological, and Organizational Research Trends in the Construction Industry, Second Edition)
  • Proceeding Paper
  • Open Access
3 Citations
1,723 Views
14 Pages

25 September 2023

The aim of this work was to study the ultimate behaviour of box-shaped aluminium members subjected to uniform compression. Eight stub column tests have been carried out at the University of Salerno. In particular, four box sections made of 6060 alumi...

(This article belongs to the Proceedings of The 15th International Aluminium Conference)
  • Article
  • Open Access
11 Citations
2,882 Views
17 Pages

1 May 2020

The paper presents experimental studies on axially compressed columns made of concrete-filled glass fiber reinforced polymer (GFRP) tubes. The infill concrete was C30/37 according to Eurocode 2. The investigated composite pipes were characterized by...

(This article belongs to the Special Issue Research of Structure and Properties of Concretes Based on Non-conventional Aggregates)
  • Article
  • Open Access
18 Citations
8,760 Views
49 Pages

Flat Slabs in Eccentric Punching Shear: Experimental Database and Code Analysis

  • Daniel Vargas,
  • Eva O. L. Lantsoght and
  • Aikaterini S. Genikomsou

29 November 2022

Eccentric punching shear can occur in concrete slab–column connections when the connection is subjected to shear and unbalanced moments. Unbalanced moments occur in all floor slabs at the edge and corner columns. As such, this problem is of pra...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
16 Citations
5,813 Views
19 Pages

Fatigue Assessment of Prestressed Concrete Slab-Between-Girder Bridges

  • Eva O.L. Lantsoght,
  • Rutger Koekkoek,
  • Cor van der Veen and
  • Henk Sliedrecht

5 June 2019

In the Netherlands, the assessment of existing prestressed concrete slab-between-girder bridges has revealed that the thin, transversely prestressed slabs may be critical for static and fatigue punching when evaluated using the recently introduced Eu...

(This article belongs to the Special Issue Fatigue and Fracture of Non-metallic Materials and Structures)
  • Article
  • Open Access
4 Citations
1,948 Views
17 Pages

16 January 2025

Currently, the use of recycled aggregates (RA) in new concrete is allowed by several international regulations, although their replacement is limited to low percentages of the coarse fraction. In order to increase the percentage of RA, several author...

(This article belongs to the Special Issue Advanced Concrete Technology and Applications in Construction Engineering, 2nd Edition)
  • Article
  • Open Access
3 Citations
1,540 Views
21 Pages

Novel Fractional Approach to Concrete Creep Modeling for Bridge Engineering Applications

  • Krzysztof Nowak,
  • Artur Zbiciak,
  • Piotr Woyciechowski,
  • Damian Cichocki and
  • Radosław Oleszek

7 August 2025

The article presents research on concrete creep in bridge structures, focusing on the influence of concrete mix composition and the use of advanced rheological models with fractional-order derivatives. Laboratory tests were performed on nine mixes va...

(This article belongs to the Special Issue Concrete in Structural Engineering: Fabrication and Mechanical Behavior (Third Edition))
  • Article
  • Open Access
2 Citations
587 Views
22 Pages

13 January 2026

This study proposes a novel deep learning framework for predicting the shear capacity of slender reinforced concrete (RC) beams without shear reinforcement. The proposed approach employs convolutional neural networks and autoencoders to transform str...

(This article belongs to the Special Issue Advance in BIM-Based Technologies for Sustainable Building Performance Predictions)
  • Article
  • Open Access
10 Citations
4,268 Views
19 Pages

Creep properties are determined in design standards by measuring the creep coefficient, noted φ, as a function of time, t, and the age of the concrete at loading, t0. The work aims to study the validity of the analytical models proposed in the most u...

  • Article
  • Open Access
6 Citations
3,231 Views
16 Pages

7 April 2021

This paper assesses the impact of adopting carbon- or glass-fiber-reinforced polymer (CFRP or GFRP) instead of steel rebars on the redistribution of moments in prestressed concrete beams (PCBs) with external CFRP tendons. A numerical program is intro...

(This article belongs to the Special Issue Advances and Challenges in Utilizing Fiber-Reinforced Polymer (FRP) in Construction)
  • Article
  • Open Access
30 Citations
6,461 Views
25 Pages

Analysis of Crack Width Development in Reinforced Concrete Beams

  • Barbara Goszczyńska,
  • Wiesław Trąmpczyński and
  • Justyna Tworzewska

3 June 2021

The reliability and durability of reinforced concrete structures depend on the amount of concrete cracking. The risk associated with cracks generates a need for diagnostic methods for the evaluation of reinforced concrete structures. This paper prese...

(This article belongs to the Special Issue Advanced Construction Materials and Processes in Poland)
  • Article
  • Open Access
1 Citations
2,002 Views
17 Pages

Frictional Behavior of Chestnut (Castanea sativa Mill.) Sawn Timber for Carpentry and Mechanical Joints in Service Class 2

  • José Ramón Villar-García,
  • Manuel Moya Ignacio,
  • Pablo Vidal-López and
  • Desirée Rodríguez-Robles

7 May 2024

Wood is poised to become a material of choice for future construction. When appropriately managed, it is a renewable material with unique mechanical properties. Thus, there has been a growing demand for hardwoods, including Castanea sativa Mill., the...

(This article belongs to the Special Issue Sustainable Construction through Utilization of Optimization Tools and Experimental Methods)
  • Article
  • Open Access
15 Citations
3,871 Views
17 Pages

Heating Temperature Prediction of Concrete Structure Damaged by Fire Using a Bayesian Approach

  • Hae-Chang Cho,
  • Sun-Jin Han,
  • Inwook Heo,
  • Hyun Kang and ,
  • Won-Hee Kang and
  • Kang Su Kim
  • + 1 author+ 0 author

21 May 2020

A fire that occurs in a reinforced concrete (RC) structure accompanies a heating temperature, and this negatively affects the concrete material properties, such as the compressive strength, the bond between cement paste and aggregate, and the crackin...

(This article belongs to the Special Issue Remodeling Technologies to Improve Building’s Structural Sustainability)
  • Article
  • Open Access
2 Citations
692 Views
22 Pages

Prediction of the Ultimate Shear Load of Flat Slabs Using a Hybrid ANN-FEM Approach: Implementation and Accuracy Insights

  • Leonardo Carvalho Mesquita,
  • Marília Gonçalves Marques,
  • Markssuel Teixeira Marvila,
  • Elyson Pozo Liberati and
  • Vinícius D’Almeida Rodrigues Ramos

This study presents a hybrid approach that combines the Finite Element Method (FEM) and Artificial Neural Networks (ANNs) to predict the ultimate punching shear capacity of flat slabs supported by interior columns. FEM models were first developed and...

(This article belongs to the Section Building Structures)

of 2