Skip to Content

257 Results Found

  • Article
  • Open Access
6 Citations
2,749 Views
14 Pages

15 October 2023

This study focuses on the analyses of nano-twinned copper (Cu) films deposited through magnetron sputtering on silicon carbide (SiC) chips. The investigation encompasses the utilization of a chromium (Cr) adhesive layer coupled with varying voltage b...

(This article belongs to the Topic Advanced Processes in Metallurgical Technologies)
  • Article
  • Open Access
7 Citations
3,868 Views
19 Pages

15 January 2021

This study investigated the effects of different substrates on the mechanical properties of Ti-60at%Ni shape memory alloys (SMA). Two types of samples were prepared for this experiment: (1) a Ti-60at%Ni deposited on SiNx, and (2) a Ti-60at%Ni deposit...

(This article belongs to the Special Issue Smart Sensors 2020)
  • Article
  • Open Access
3 Citations
4,489 Views
10 Pages

The Effect of Novel Support Layer by Titanium-Modified Plasma Nitriding on the Performance of AlCrN Coating

  • Jiqiang Wu,
  • Longchen Zhao,
  • Jianbin Ji,
  • Fei Sun and ,
  • Jing Hu,
  • Xilang Liu,
  • Dandan Wang,
  • Xulong An,
  • Xiangkui Liu and
  • Wei Wei
  • + 5 authors+ 0 author

6 September 2025

In order to obtain a gradient coating with excellent performance, novel titanium-modified plasma nitriding was primarily used as a support layer for the PVD coating of 38CrMoAl steel. The samples were subjected to titanium-modified plasma nitriding b...

(This article belongs to the Special Issue Advances in Coatings on Metals for Corrosion Protection)
  • Communication
  • Open Access
5 Citations
3,769 Views
11 Pages

This parameter study examines the impact of two distinct adhesion layers, chromium (Cr) and titanium (Ti), on the performance of CuO/Cu2O-based chemoresistive gas sensors by varying the layer thickness. The sensing material utilised on a Si-SiO2 sens...

(This article belongs to the Section Nanostructures for Chemical Sensing)
  • Article
  • Open Access
2 Citations
948 Views
14 Pages

Formation of a Low-Porosity Bonding Layer with Enhanced Adhesive Strength via Gas-Thermal Spraying

  • Aidar Kengesbekov,
  • Bauyrzhan Rakhadilov,
  • Nurtoleu Magazov,
  • Indira Abizhanova and ,
  • Arystanbek Kussainov and
  • Saule Abdulina
  • + 1 author+ 0 author

8 March 2026

Thermal barrier coatings (TBCs) are an effective means of providing thermal insulation and protecting the hot-section components of gas turbine engines. Their quality and performance characteristics largely depend on the microstructural features and...

(This article belongs to the Section Metallic Functional Materials)
  • Article
  • Open Access
3 Citations
820 Views
15 Pages

4 February 2026

To address the inherent defects in the fabrication of AlCrN titanium alloy coatings and enhance interfacial bonding strength as well as tribological performance, an AlCrN coating was employed as an absorption layer and subjected to laser shock proces...

(This article belongs to the Special Issue Surface Modifications and Coatings for Metallic Materials)
  • Article
  • Open Access
5 Citations
5,104 Views
17 Pages

Combinatorial Materials Design Approach to Investigate Adhesion Layer Chemistry for Optimal Interfacial Adhesion Strength

  • Rachel L. Schoeppner,
  • Barbara Putz,
  • Aidan A. Taylor,
  • Laszlo Pethö and ,
  • Keith Thomas,
  • Olivier Antonin,
  • Thomas Nelis and
  • Johann Michler
  • + 3 authors+ 0 author

30 March 2021

A combinatorial material adhesion study was used to optimize the composition of an adhesion promoting layer for a nanocrystalline diamond (NCD) coating on silicon. Three different adhesion promoting metals, namely W, Cr, and Ta, were selected to fabr...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
15 Citations
4,175 Views
12 Pages

30 May 2021

We studied the effect of CrC interlayers with different carbon contents on the adhesion of CrC/a-C:H coatings prepared by anode assisted reactive magnetron sputtering combined with DC-pulsed plasma enhanced chemical vapor deposition. The adhesion of...

  • Article
  • Open Access
399 Views
25 Pages

Improving the Performance Properties of Stainless Steel Products by Depositing Modifying Coatings Containing Layers of Copper, Chromium and Zirconium

  • Sergey Grigoriev,
  • Pavel Potapov,
  • Valery Zhylinski,
  • Uladzimir Matys and ,
  • Catherine Sotova,
  • Filipp Milovich,
  • Elena Eganova,
  • Tatyana Borovik and
  • Alexey Vereschaka
  • + 4 authors+ 0 author

This article presents the potential for enhancing the corrosion resistance of stainless steel components by depositing modifying coatings containing copper, chromium, and zirconium layers on their surfaces while optimising the deposition process para...

  • Article
  • Open Access
1 Citations
2,251 Views
10 Pages

Effect of Chromium Adhesion Layer Thickness on Contact Resistance and Schottky Barrier Characteristics in WSe2 Field-Effect Transistor

  • Sung-Ha Kim,
  • Seong-Yeon Lee,
  • Tae-Jeong Kim,
  • Kwangseuk Kyhm and ,
  • Kenji Watanabe,
  • Takashi Taniguchi and
  • Ki-Ju Yee
  • + 2 authors+ 0 author

13 September 2025

While metal adhesion layers are commonly used in the fabrication of field–effect transistors (FETs) based on two-dimensional (2D) materials, the impact of adhesion layer thickness on device performance remains insufficiently explored. In this s...

  • Article
  • Open Access
3 Citations
1,263 Views
21 Pages

Structural and Phase Characteristics and Properties of Multilayer Cr/CrN Coatings Obtained by Magnetron Sputtering

  • Nazerke Muktanova,
  • Bauyrzhan Rakhadilov,
  • Erasyl Naimankumaruly and
  • Aisulu Kalitova

24 November 2025

Multilayer Cr/CrN coatings with two-, four-, and six-layer architectures were deposited on E110 zirconium alloy substrates by reactive magnetron sputtering. The effect of layer number on structure, phase composition, and performance was systematicall...

(This article belongs to the Special Issue Advances in Alloy Surface Mechanics: The Effects of Coating Technologies on Performance)
  • Article
  • Open Access
4 Citations
3,789 Views
15 Pages

Highly Robust Ti Adhesion Layer during Terminal Reaction in Micro-Bumps

  • Chen-Wei Kao,
  • Po-Yu Kung,
  • Chih-Chia Chang,
  • Wei-Chen Huang and ,
  • Fu-Ling Chang and
  • C. R. Kao
  • + 1 author+ 0 author

17 June 2022

The use of scaled-down micro-bumps in miniaturized consumer electronic products has led to the easy realization of full intermetallic solder bumps owing to the completion of the wetting layer. However, the direct contact of the intermetallic compound...

(This article belongs to the Special Issue Simulation and Reliability Assessment of Advanced Packaging)
  • Article
  • Open Access
5 Citations
2,087 Views
13 Pages

Impact Wear Behavior of the Valve Cone Surface after Plasma Alloying Treatment

  • Changzeng Luo,
  • Yajun Yao,
  • Dongbo Wei,
  • Muyao Lin and ,
  • Pingze Zhang and
  • Shengguan Qu
  • + 1 author+ 0 author

2 June 2024

Valves are prone to wear under harsh environments, such as high temperatures and reciprocating impacts, which has become one of the most severe factors reducing the service life of engines. As a lightweight ceramic, CrN is considered an excellent pro...

(This article belongs to the Section Surface Sciences and Technology)
  • Article
  • Open Access
3 Citations
2,114 Views
16 Pages

8 April 2025

Zirconium alloys are essential materials for nuclear fuel cladding. During a loss-of-coolant accident (LOCA), zirconium alloy cladding can oxidize in high-temperature steam (>1000 °C), generating hydrogen and releasing significant heat. Withou...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
1,060 Views
15 Pages

High-Vacuum Tribological Behaviors of Wear-Resistant WC/a-C:H Coatings with Strong Adhesion on Zirconia

  • Zeqing Li,
  • Liang Li,
  • Honghong Zhang,
  • Shubao Shao and ,
  • Chongpu Zhai,
  • Lunlin Shang,
  • Guang’an Zhang and
  • Minglong Xu
  • + 3 authors+ 0 author

30 September 2025

To improve the applicability of tetragonal zirconia (TZP) in the high-vacuum friction drive field, a strategy combining Cr ion implantation-modified layer and hydrogen-containing amorphous carbon coating was proposed in this study. The designed coati...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
23 Citations
4,976 Views
12 Pages

29 July 2020

We investigated the effects of substrate rotation speed on the structural and mechanical properties of CrN/CrAlSiN multilayer coatings produced using high-power impulse magnetron sputtering (HiPIMS) on silicon and high-speed steel (HSS) substrates. S...

(This article belongs to the Special Issue Multilayer and Functional Graded Coatings)
  • Article
  • Open Access
1 Citations
1,291 Views
19 Pages

Recently, diamond-like carbon (DLC) films have been considered for enhancing the wear resistance of rubber because rubber exhibits a high coefficient of friction and is prone to wearing out. However, the significant difference in thermal expansion co...

(This article belongs to the Special Issue Advanced Protective Composite Coatings and Films: Tribological Mechanisms and Applications)
  • Article
  • Open Access
8 Citations
2,941 Views
9 Pages

This study comparatively analyzed the wear characteristics and adhesion properties of 86WC–10Co–4Cr (WC) coatings deposited using the high velocity oxygen fuel process and 75Cr3C2–25NiCr (CrC) and Al2O3–3TiO2 (Al2O3) coatings...

(This article belongs to the Special Issue Additive Manufacturing of Metallic Components for Hard Coatings)
  • Article
  • Open Access
12 Citations
2,685 Views
21 Pages

The Surface Assessment and the Properties of Selected Multilayer Coatings

  • Bogdan Warcholinski,
  • Adam Gilewicz and
  • Maria Tarnowska

3 September 2023

The paper presents an evaluation of the surface quality and properties of multilayer coatings, obtained using cathodic arc evaporation, of the same structure, in which the top layer is a CrN chromium nitride layer. The second components of a double-l...

(This article belongs to the Special Issue Friction and Wear of Cutting Tools and Cutting Tool Materials)
  • Article
  • Open Access
1 Citations
1,317 Views
24 Pages

Duplex Surface Modification of 40CrMnMo7 Tool Steel by Chemical-Thermal Treatment and PVD Coating

  • Boyan Dochev,
  • Yavor Sofronov,
  • Milko Yordanov,
  • Valentin Mishev and ,
  • Antonio Nikolov,
  • Rayna Dimitrova,
  • Milko Angelov,
  • Ivan Zahariev,
  • Georgi Todorov and
  • Krassimir Marchev
  • + 5 authors+ 0 author

28 March 2026

The aim of this work is to investigate the possibility of improving the performance properties of 40CrMnMo7 steel by conducting duplex surface modification treatment. Chemical-thermal treatment processes were used—nitrocarburization and ion-nit...

(This article belongs to the Special Issue Advances in Tribological Performance and Wear Mechanism of Metallic Materials)
  • Article
  • Open Access
6 Citations
2,638 Views
14 Pages

29 November 2022

To enhance the tribological performance of the conventional TiCrN coating, the MoS2–TiCr coatings are deposited onto the TiCrN layer by magnetron sputtering. In general, the MoS2 is implemented to enhance the friction reduction performance of t...

(This article belongs to the Special Issue Recent Advances in Functional Surfaces and Interfaces)
  • Article
  • Open Access
3 Citations
3,182 Views
11 Pages

25 December 2022

Cu coatings were deposited on acrylonitrile-butadiene-styrene copolymer (ABS) substrates by DC magnetron sputtering with Cu target. Cr ions generated by arc evaporation were used to bombard the ABS substrates before the Cu coating process. The influe...

(This article belongs to the Section Polymer Membranes and Films)
  • Article
  • Open Access
6 Citations
1,435 Views
13 Pages

Effect of Buffer Layer Type on the Mechanical Properties and Corrosion Resistance of Magnetron Sputtered Cr Coatings on 7050 Al Alloy

  • Yang Ding,
  • Tao He,
  • Xiangyang Du,
  • Alexey Vereschaka and ,
  • Catherine Sotova,
  • Kang Chen,
  • Jian Li,
  • Yuqi Wang and
  • Peiyu He
  • + 4 authors+ 0 author

Limited hardness and corrosion resistance restrict 7050 aluminum alloys in aggressive environments. Cr coatings, applied as single layers or over Ti, Al, or Ni buffer layers, were deposited onto 7050 aluminum alloy by direct-current magnetron sputter...

(This article belongs to the Special Issue Advanced Surface Engineering of Alloys: Coatings and Thin Films)
  • Article
  • Open Access
9 Citations
4,689 Views
13 Pages

Structure and Tribological Properties of AlCrN + CrCN Coating

  • Krzysztof Lukaszkowicz,
  • Jozef Sondor,
  • Agnieszka Paradecka,
  • Mirosława Pawlyta and ,
  • Bartosz Chmiela,
  • Mieczysław Pancielejko,
  • Bożena Szczucka-Lasota,
  • Tomasz Węgrzyn and
  • Tomasz Tański
  • + 4 authors+ 0 author

11 November 2020

The paper presents results of the investigation of the AlCrN and AlCrN + CrCN coatings, deposited by arc evaporation method on the austenitic steel substrate. Topography studies performed with the use of AFM showed that the roughness value was 24 nm...

(This article belongs to the Special Issue Coatings Deposited by Cathodic Arc and Magnetron Sputtering Process)
  • Article
  • Open Access
9 Citations
2,681 Views
14 Pages

Wettability, Corrosion Resistance, and Osteoblast Response to Reduced Graphene Oxide on CoCr Functionalized with Hyaluronic Acid

  • Belén Chico,
  • Blanca Teresa Pérez-Maceda,
  • Sara San-José,
  • María Lorenza Escudero and ,
  • María Cristina García-Alonso and
  • Rosa María Lozano
  • + 1 author+ 0 author

6 April 2022

The durability of metal–metal prostheses depends on achieving a higher degree of lubrication. The beneficial effect of hyaluronic acid (HA) on the friction and wear of both natural and artificial joints has been reported. For this purpose, graphene o...

  • Article
  • Open Access
17 Citations
3,685 Views
13 Pages

23 November 2020

FeCoCrNiMnAlx high-entropy alloy (HEA) cladding layers were successfully fabricated on H13 steel by laser cladding. The microstructure and properties of the FeCoCrNiMnAlx HEA cladding layers were systematically studied. The influence of Al content on...

  • Article
  • Open Access
24 Citations
6,564 Views
12 Pages

Raman Spectroscopy for Reliability Assessment of Multilayered AlCrN Coating in Tribo-Corrosive Conditions

  • Janis Baronins,
  • Maksim Antonov,
  • Sergei Bereznev,
  • Taavi Raadik and
  • Irina Hussainova

In this study, a multilayered AlCrN coating has been employed as a protective layer for steel used in tribo-corrosive conditions. The coating was deposited by a lateral rotating cathode arc PVD technology on a AISI 316L stainless steel substrate. A r...

(This article belongs to the Special Issue Coatings Tribology)
  • Review
  • Open Access
4 Citations
2,425 Views
19 Pages

20 December 2025

Chromium nitride (Cr-N) coatings fabricated by physical vapor deposition (PVD) have gained significant interest in the field of surface protection with the exceptional hardness, robust adhesion to substrates, and superior wear resistance. The mechani...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
9 Citations
3,084 Views
22 Pages

Mechanical and Tribological Properties of the CrAl/CrAlN and CrAl/CrAlN-(a-CNx) Multilayers Deposited by HIPIMS

  • Cecilio J. Martínez-González,
  • Max F. Flores-Jiménez,
  • David I. Bravo-Barcenas,
  • Omar Jiménez-Alemán and
  • Martín Flores-Martínez

31 July 2023

In this study, two CrAl/CrAlN multilayer coatings of 1.5 µm and 1.2 µm thicknesses were deposited from a (50:50) CrAl sectioned target by high-power impulse magnetron sputtering (HIPIMS) onto A11 tool steel to evaluate the effect over mechanical and...

(This article belongs to the Special Issue Mechanical Properties and Tribological Behavior of Alloy/Coatings, 2nd Edition)
  • Article
  • Open Access
8 Citations
2,650 Views
12 Pages

Effect of Cr3C2 Content on the Microstructure and Wear Resistance of Fe3Al/Cr3C2 Composites

  • Yingkai Feng,
  • Jiguo Shan,
  • Lin Zhao,
  • Zhenbo Liu and ,
  • Karin Gong and
  • Changhai Li
  • + 1 author+ 0 author

17 December 2022

In this paper, an engine piston ring coating comprising composite material of Fe3Al and Cr3C2 mixed powder was prepared by laser cladding onto carbon structural steel. The microstructure and tribological properties of the cladding materials were inve...

(This article belongs to the Special Issue Laser Cladding Coatings: Microstructure, Properties, and Applications)
  • Article
  • Open Access
7 Citations
3,039 Views
16 Pages

Preparation and Characterization of the Cr-Nanodiamonds/MoN Coatings with Performant Mechanical Properties

  • Vadzim Chayeuski,
  • Abdelhafed Taleb,
  • Valery Zhylinski,
  • Andrei Kuleshov and
  • Roman Shtempliuk

18 July 2022

This paper presents the results of a study on the preparation and characterization of a Cr-DND/MoN detonation chromium-nanodiamond coating deposited on cemented tungsten carbide (WC–3 wt.% Co) mill blades using Arc-PVD and electrodeposition met...

  • Article
  • Open Access
9 Citations
3,873 Views
13 Pages

Effects of B on the Segregation Behavior of Mo at the Fe–Cr(111)/Cr2O3(0001) Interface: A First-Principles Study

  • Yanlu Zhang,
  • Caili Zhang,
  • Zhuxia Zhang,
  • Nan Dong and ,
  • Jian Wang,
  • Ying Liu,
  • Zhibo Lei and
  • Peide Han
  • + 3 authors+ 0 author

28 April 2020

The addition of B can inhibit the precipitation of σ phases at the grain boundary to improve the hot workability and corrosion resistance for super austenitic stainless steel with high Cr and Mo content. This study focused on the interaction be...

  • Article
  • Open Access
12 Citations
7,221 Views
9 Pages

High Conductivity and Adhesion of Cu-Cr-Zr Alloy for TFT Gate Electrode

  • Junbiao Peng,
  • Kuankuan Lu,
  • Shiben Hu,
  • Zhiqiang Fang and ,
  • Honglong Ning,
  • Jinglin Wei,
  • Zhennan Zhu,
  • Yicong Zhou,
  • Lei Wang and
  • Xubing Lu
  • + 6 authors+ 1 author

10 August 2017

The characteristics of Cu alloy (0.3 wt. % Cr, 0.2 wt. % Zr) thin film deposited by direct current (DC) magnetron sputtering deposition were investigated. The conductivity and adhesion of the Cu-0.3%Cr-0.2%Zr films were optimized by increasing the sp...

(This article belongs to the Special Issue Thin-Film Transistor)
  • Article
  • Open Access
7 Citations
5,064 Views
12 Pages

PVD Coatings for Lightweight Bipolar Plates

  • Parnia Navabpour,
  • Liam Cooper,
  • Shicai Yang,
  • Jinlong Yin and ,
  • Kun Zhang,
  • Ahmad El-Kharouf and
  • Hailin Sun
  • + 2 authors+ 0 author

2 October 2024

Bipolar plates are one of the main components of proton exchange membrane fuel cells (PEMFCs). Their functions include distributing reactants, supporting the cell, and conducting heat and electricity. They account for a significant proportion of the...

  • Article
  • Open Access
38 Citations
7,449 Views
14 Pages

25 March 2020

The AlCrN and AlCrON coatings were deposited on plasma nitrided H13 steels through ion-source-enhanced arc ion plating, and their structures, mechanical properties, thermal stabilities, and tribological properties were investigated. Structural analys...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
16 Citations
7,213 Views
25 Pages

28 October 2020

The primary purpose of this work was to study the effectiveness of using diamond-like coatings (DLC) to increase the wear resistance of carbide end mills and improve the surface quality of the processed part when milling aluminum alloy and low-carbon...

(This article belongs to the Special Issue Technologies of Coatings and Surface Hardening for Tool Industry)
  • Article
  • Open Access
1 Citations
1,684 Views
17 Pages

Investigation of the Mechanical Properties and Friction Coefficient of Cr/CrTiAl and Cr/(CrTiAl)N/CrTiAl PVD Coatings Deposited on 42CrMo4 QT Steel

  • Yavor Sofronov,
  • Boyan Dochev,
  • Valentin Mishev,
  • Antonio Nikolov and ,
  • Krum Petrov,
  • Rayna Dimitrova,
  • Milko Yordanov,
  • Milko Angelov,
  • Georgi Todorov and
  • Krassimir Marchev
  • + 5 authors+ 0 author

17 February 2026

Test specimens fabricated from 42CrMo4 steel were subjected to heat treatment comprising quenching followed by high-temperature tempering. This treatment is commonly referred to as hardening, and the result is a tempered sorbite microstructure that p...

(This article belongs to the Special Issue Recent Advances in Surface Modification of Metallic Materials)
  • Article
  • Open Access
561 Views
16 Pages

Optimized Interfacial Layers for High-Adhesion and Damp-Heat-Resistant Cu Meshes with Aperiodic Geometries on PET Substrates

  • Xiao Lu,
  • Jia Li,
  • Biyou Bao,
  • Chengli Zhang and ,
  • Qiang Wang,
  • Guanglong Xu,
  • Xianfa Rao,
  • Hongliang Zhang and
  • Weijie Song
  • + 4 authors+ 0 author

17 June 2026

Copper (Cu) thin films and meshes on polyethylene terephthalate (PET) substrates are promising flexible transparent conductive electrodes (TCEs), yet their practical use is limited by insufficient interfacial adhesion and poor oxidative stability on...

(This article belongs to the Special Issue Flexible Ferroelectric Electronic Materials and Devices: Challenges and Opportunities)
  • Article
  • Open Access
18 Citations
2,789 Views
12 Pages

High-Temperature Oxidation Behavior of Cr-Ni-Mo Hot-Work Die Steels

  • Yuqi Zhang,
  • Cheng Zhang,
  • Fei Li,
  • Zhou Wang and ,
  • Xiaodong Wang,
  • Changji Wang,
  • Cheng Zhang,
  • Jinfeng Huang,
  • Feng Mao and
  • Jinmeng Hu
  • + 9 authors+ 4 authors

25 July 2022

The oxidation of 3Cr3Mo2NiW and 3CrNi3Mo steels was studied at 600 °C in air, and the test results suggest that the parabolic rate law fitted the oxidation kinetics of both steels. The microstructure, morphology, structure, and phase composition...

  • Article
  • Open Access
752 Views
18 Pages

18 December 2025

Pipeline steels under cyclic loading in corrosive environments are prone to wear and corrosion–wear synergy. Low-dilution, high-reliability Ni-based Cold Metal Transfer (CMT) overlays are therefore required to ensure structural integrity. In th...

(This article belongs to the Special Issue Effect of Heat Treatment on Structural and Mechanical Properties of Metallic Materials/Coatings)
  • Article
  • Open Access
1 Citations
1,290 Views
19 Pages

The Influence of Applying PVD Coatings on Adhesion Wear Resistance of Quenching and Tempering Steels

  • Ivica Kladarić,
  • Stjepan Golubić,
  • Danko Ćorić and
  • Andrijana Milinović

23 January 2026

The article examines the effect of different types of two-layer nanostructured coatings (cVIc and nACVIc) deposited on three types of steel substrates, 45S20, C45E, and 42CrMo4, to determine the resistance to adhesive wear of the substrate/coating sy...

  • Feature Paper
  • Article
  • Open Access
2,219 Views
20 Pages

Biocompatible Inorganic PVD MeSiON Thin Films (Me = Cr or Zr) Used to Enhance the Bond Strength Between NiCr-Based Metallic Frameworks and Ceramic in Dental Restorations

  • Mihaela Dinu,
  • Cosmin Mihai Cotrut,
  • Alina Vladescu (Dragomir),
  • Florin Baciu and ,
  • Anca Constantina Parau,
  • Iulian Pana,
  • Lidia Ruxandra Constantin and
  • Catalin Vitelaru
  • + 3 authors+ 0 author

14 July 2025

Background/Objectives: The increasing demand for aesthetics in dentistry has driven significant advancements in both materials and techniques. The primary cause of ceramic detachment in dental restorations is extensive mechanical stress, which often...

(This article belongs to the Special Issue Dental Materials Design and Innovative Treatment Approach)
  • Article
  • Open Access
9 Citations
2,997 Views
17 Pages

Corrosion Resistance in Artificial Perspiration of Cr-Based Decorative Coatings

  • Edgar Carneiro,
  • José David Castro,
  • Maria José Lima,
  • Jorge Ferreira and
  • Sandra Carvalho

15 August 2023

We aim at developing hexavalent chromium-free coatings for frequently touched decorative parts. Cr(N,O) and multilayered CrN/CrO coatings were deposited by means of reactive magnetron sputtering. All samples presented good adhesion to the substrates...

  • Article
  • Open Access
13 Citations
3,430 Views
12 Pages

Research on the Structural–Phase and Physical–Mechanical Characteristics of the Cr3C2-NiCr Composite Coating Deposited by the HVOF Method on E110 Zirconium Alloy

  • Sherzod Kurbanbekov,
  • Bauyrzhan Rakhadilov,
  • Dauir Kakimzhanov,
  • Bekbolat Seitov and ,
  • Karakoz Katpaeva,
  • Abil Kurmantayev,
  • Merkhat Dautbekov and
  • Aidar Kengesbekov
  • + 3 authors+ 0 author

14 August 2024

Composite coatings based on chromium carbide (Cr3C2) and nickel–chromium alloys (NiCr) are widely used due to their unique properties, including high heat resistance, wear resistance and corrosion resistance. This article studies the structural...

(This article belongs to the Section Ceramic Coatings and Engineering Technology)
  • Article
  • Open Access
721 Views
17 Pages

Tool Reuse by Electrolytic Stripping and Re-Coating: Comparative Study of PVD Nitrides in Turning AISI 4340 Steel

  • Edwin E. Alferez,
  • Fabio F. Vallejo,
  • Carlos M. Moreno,
  • Jhon J. Olaya and
  • Luis C. Ardila

The reuse of WC–Co cutting inserts is a relevant strategy to reduce tooling costs and the consumption of critical raw materials, such as W and Co. Still, the effect of stripping and re-coating cycles on tool performance remains largely unexplor...

(This article belongs to the Special Issue Exploring Wear and Friction Mechanisms in Tribological Coatings and Surface Textures)
  • Article
  • Open Access
4 Citations
2,974 Views
20 Pages

The Influence of a Novel, Crenelated Design of CAD-CAM Ceramic Veneers on the Debonding Strength

  • Alexandra-Cristina Măroiu,
  • Anca Jivănescu,
  • Dan-Andrei Șerban,
  • Radu-Marcel Negru and ,
  • Virgil-Florin Duma,
  • Cosmin Sinescu and
  • Mihai Romînu
  • + 2 authors+ 0 author

12 May 2023

(1) Background: Aesthetic dentistry has become one of the most dynamic fields in modern dental medicine. Ceramic veneers represent the most appropriate prosthetic restorations for smile enhancement, due to their minimal invasiveness and highly natura...

(This article belongs to the Special Issue Biomaterials and Mechanics in Dentistry)
  • Article
  • Open Access
7 Citations
4,146 Views
20 Pages

Investigation of the Nitriding Effect on the Adhesion and Wear Behavior of CrN-, AlTiN-, and CrN/AlTiN-Coated X45CrMoV5-3-1 Tool Steel Formed Via Cathodic Arc Physical Vapor Deposition

  • Gülşah Aktaş Çelik,
  • Konstantinos Fountas,
  • Şaban Hakan Atapek,
  • Şeyda Polat and ,
  • Eleni Kamoutsi and
  • Anna D. Zervaki
  • + 1 author+ 0 author

Monolayer (CrN, AlTiN) and bilayer (CrN/AlTiN) coatings are formed on the surface of conventional heat-treated and gas-nitrided X45CrMoV5-3-1 tool steel via Cathodic Arc Physical Vapor Deposition (CAPVD), and the adhesion characteristics and room- an...

(This article belongs to the Special Issue Wear and Corrosion Behaviour of Metals and Alloys)
  • Article
  • Open Access
16 Citations
2,361 Views
15 Pages

9 August 2023

The interface models of diamond-coated WC-Co cemented carbide (DCCC) were constructed without intermediate layers and with different interface terminals, such as intermediate layers of TiC, TiN, CrN, and SiC. The adhesion work of the interface model...

  • Article
  • Open Access
13 Citations
2,740 Views
15 Pages

3 November 2022

In tribological applications, the degradation of alloy nitride coatings is an issue of increasing concern. The drawbacks of monolayer hard coatings can be overcome using a multilayer coating system. In this study, single-layer TiAlNbN and multilayer...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
19 Citations
3,413 Views
13 Pages

Preparation and Characterization of NiCr/NiCr-Al2O3/Al2O3 Multilayer Gradient Coatings by Gas Detonation Spraying

  • Bauyrzhan Rakhadilov,
  • Dastan Buitkenov,
  • Zhuldyz Sagdoldina,
  • Zhanat Idrisheva and ,
  • Manira Zhamanbayeva and
  • Dauir Kakimzhanov
  • + 1 author+ 0 author

10 December 2021

This paper investigates the influence of the technological parameters of detonation spraying on the phase composition of NiCr- and Al2O3-based coatings. It was determined that the phase composition of Al2O3 coatings during detonation spraying strongl...

of 6