Various carbon contents in the MgO-C refractory were studied with respect to the oxidation resistance and the wetting behavior with slag. The bulk density, apparent porosity, cold crushing strength, oxidation rate, and mass loss rate of the fired MgO...
Amorphous Si-B-C-N alloys can combine exceptional oxidation resistance up to 1500 °C with high-temperature stability of superior functional properties. Because some of these characteristics require as high N content as possible, the maximum achievabl...
Freshwater resources are scarce in coastal areas, and using seawater as mixing water can alleviate the scarcity of freshwater resources. However, the presence of chloride ions in seawater affects the generation of hydration products and the durabilit...
(1) Objectives: Traditional kombucha (K) is a fermented beverage obtained from black or green tea infusion. Besides traditional substrates, the possibility of using alternative ingredients resulted in changes in metabolic profile and biological activ...
(1) Background: Recent advances in precision oncology research rely on indicating specific genetic alterations associated with treatment sensitivity. Developing ex vivo systems to identify cancer patients who will respond to a specific drug remains i...
Previous studies have often observed that moisture can promote the lubricity and wear resistance of carbon-metal contact pairs in purely mechanical conditions. However, the damage to pantograph carbon strips was found to be aggravated in rainfall con...
Fresh jujube (Ziziphus jujube) is rich in vitamin C, which is an important quality index and generally decreases with storage time. The aim of this study was to build kinetic models for determining the vitamin C content, thus predicting the quality c...
In this study, a simple method was adopted for the synthesis of MnO@C nanocomposites by combining in-situ reduction and carbonization of the Mn3O4 precursor. The carbon content, which was controlled by altering the annealing time in the C2H2/Ar atmos...
The market value of sea urchin gonads is determined by the specific characteristics associated with gonad size and texture. Formulated feeds can effectively promote the gonad growth of sea urchins but cannot assure essential gonad texture traits. The...
Plant photosynthesis has a non-negligible influence on forage quality and ecosystem carbon sequestration. However, the influence of long-term warming, increasing precipitation, and their interactions on the photosynthesis of dominant species in deser...
Soybean (Glycine max) is an important oil crop, but the regulatory mechanisms underlying seed oil accumulation remain unclear. We identified a member of the GmWRI1s transcription factor family, GmWRI1c, that is involved in regulating soybean oil cont...
In this work, the solid solution product of [Nb][C] in the Nb-microalloyed steels with various carbon contents in the range of 0.20~1.80 wt.% was investigated by means of the extraction phase analysis method. The results showed that the Nb content in...
In the field of Cooperative Intelligent Transport Systems (C-ITSs), the traditional approach to testing often emphasizes technological parameters, leaving the validation of message content insufficiently addressed. Since the content of these messages...
The content of vitamin C in fruit juices can be lowered by alterations in storage and temperature. This study compared storage circumstances (temperature, duration, and packaging type) to determine which variable had the biggest influence on changes...
Pungent red peppers and chilis are healthy foods and crucial ingredients of modern diets due to their content of bioactive phytochemicals such as carotenoids, tocopherols, capsaicinoids, polyphenols, and vitamin C. The production of pungent peppers w...
Diamond-like-carbon “DLC” coatings can be deposited in many different ways, giving a large range of material properties suitable for many different types of applications. Hydrogen content significantly influences the mechanical properties...
Vitamin C serves as a cofactor in the synthesis of collagen needed to support cardiovascular function, maintenance of cartilage, bones, and teeth, as well as being required in wound healing. Although vitamin C is essential, humans are one of the few...
The effect of environmental variables on vitamin C degradation in the analysed plant and vegetable juice samples was investigated. The study focused on samples from chives, dandelion, and nettle, as well as tomato, carrot, cucumber, red and white pep...
B4C is beneficial for forming a glassy film that is effective at impeding oxygen diffusion and improving the oxidation resistance of coatings at high temperature. The effect of B4C content on the oxidation resistance of a B4C-SiO2–Albite/Al2O3...
The mechanical properties of Cu alloyed steels are influenced significantly by the Cu content and the respective state of Cu precipitations as well as the C content. In this context, the effect of an increased C content on the fatigue crack initiatio...
The aim of the paper is to evaluate the effect of aluminum content on the oxidation resistance of new-generation of oxide dispersion strengthened (ODS) alloy at 1200 °C. Three grades of the alloy of chemical composition Fe-15Cr-xAl-4Y2O3 with dif...
(Ti,W)C-based cermets are an ideal material for the preparation of high-performance cutting tools due to their excellent mechanical properties, high temperature oxidation resistance, and corrosion resistance. However, their lower toughness limits the...
The analysis of total vitamin C content in food is most frequently performed by reducing dehydroascorbic acid to ascorbic acid, which is then assayed with the technique of high-performance liquid chromatography combined with spectrophotometric detect...
The aim of the study was to evaluate the correlation between the content of C, N, P and their stoichiometry in the soils of Białowieża Primeval Forest in northeastern Poland. The studies were carried out in the forest reserves of Biało...
Herein, we developed a nondestructive detection system with low prediction errors for determining the vitamin C content in Indian jujube. This system comprises a Ge photodetector, a halogen lamp and five near-infrared (NIR) bandpass filters. The dete...
Japanese adults typically have healthier lipid profiles than American and European adults and a lower prevalence and later onset of atherosclerotic cardiovascular disease (ASCVD). Many Japanese also have uniquely elevated levels of high-density lipop...
In this work, a MoS2/C heterostructure was designed and prepared through an in situ composite method. The introduction of carbon during the synthesis process altered the morphology and size of MoS2, resulting in a reduction in the size of the flower-...
Ceramic coatings deposited on orthopedic implants are an alternative to achieve and maintain high wear resistance of the metallic device, and simultaneously allow for a reduction in metal ion release. Silicon nitride based (SiNx) coatings deposited b...
The spectral quality and intensity of light, photoperiodism, and other environmental factors have profound impacts on the metabolic composition of light-dependent higher plants. Hence, we investigate the effects of fluorescent light (96 μmol m&min...
Creep-rupture properties and oxidation behavior of a series of alumina-forming austenitic (AFA) alloys with variations of Cr contents, based on Fe-(13.5-18)Cr-25Ni-4Al-1.5Nb-0.1C in weight percent, have been evaluated at 850–900 °C. The stu...
The oxidation of methanol is studied at TiO2-supported Pt electrodes of varied high surface area carbon content (in the 30-5% w/w range) and C÷Ti atom ratio (in the 3.0-0.4 ratio). The Pt-TiO2 catalyst is prepared by a photo-deposition process and C...
(1) Background: This study investigated the influence of Bis-GMA, TEGDMA, UDMA, and two different polyethylene glycol (PEG)-containing, UDMO-based co-monomers on the Young’s modulus and flexural strength, degree of methacrylate C=C double bond...
The carbon/carbon (C/C) composites and T2-copper were joined via thermo-compensated resistance brazing welding (RBW) with AgCuTi filler powder. The effects of the Ti content in AgCuTi filler powder on the interfacial microstructure and mechanical pro...
The need for better wear-resistant materials to reduce cost and save the environment is noteworthy. The striking wear resistance of high chromium white cast iron (HCCI) has made it industry’s predominant choice. The three-body abrasive wear res...
Several studies have shown that UV-C (ultraviolet C) irradiation promotes the bioactive compounds and antioxidants of fresh fruits and vegetables. The aim of this study was to apply UV irradiation in dried lemon pomace powder for enhancing its phenol...
The purpose of this study was to evaluate the effects of different nitrogen (N), phosphorus (P), and potassium (K) fertilization ratios on the carbon (C), N, and P contents and their ecological stoichiometric characteristics in the leaf–soil&nd...
Ni-Ti-Al alloys are highly promising materials for use in high-temperature structural materials. However, minimal research has been conducted to improve the associated mechanical properties through secondary phase addition. In this study, Ni-Ti-Al/Ti...
The influence of catch crop (field pea) management and the time of its application [plots with autumn (A.I.) or spring (S.I.) biomass incorporation vs. treatments without catch crop (C) use] on the activity of five soil enzymes associated with C- (CM...
Membrane water content is of vital importance to the freezing durability of proton exchange membrane fuel cells (PEMFCs). Excessive water freezing could cause irreversible degradation to the cell components and deteriorate the cell performance and li...
La2O3 nanoparticles stabilized on carbon nanoflake (CNF) matrix were synthesized and graphitized to produce core-shell structures La2O3/CNFs@C. Further oxidation of these structures by nitric acid vapors for 1, 3 or 6 h was performed, and surface-oxi...
Fe-Mn-Al-C lightweight steel is an alternative to traditional low-alloy structural steels. It is lightweight and can be used to reduce the weight of structures without increasing their density. However, in the marine environment, traditional low-allo...
The present work was performed on three versions of a newly developed alloy coded T200 containing 6.5% Cu, 0.1% Fe, 0.45% Mg, and 0.18% Zr in addition to A319 and A356 alloys (grain refined and Sr-modified). Tensile bars were subjected to 13 differen...
In this paper, we work on a Cache and Multi-layer MEC enabled C-RAN (CMM-CRAN) to handle various user tasks with minimized latency and energy cost. We intend to solve two particular problems of CMM-CRAN. First, because CMM-CRAN has to maximally cache...
The aim of this study was to determine the effect of cultivars on the concentration of antioxidant compounds: total carotenoid content (TC) and vitamin C (VC), and their correlation with the total antioxidant activity (TAA) in 65 potato cultivars (So...
Rapeseed (Brassica napus L.) seedlings are rich in vitamin C (Vc), which is beneficial for humans. Understanding the genetic variance in Vc content has practical significance for the breeding of “oil–vegetable dual-purpose” rapeseed...
The nutritional value of honey is closely related to its components, which are highly influenced by the botanic origin. C. pi. Shen (Codonopsis pilosula (Franch.) var. modesta (Nannf.) L. T. Shen), a key plant in traditional Chinese medicine, mainly...
This study reports a characterization of the nutritional quality of several vegetables belonging to Brassica genus and other species cultivated in the central Italy. The aim of this trial is to investigate the antioxidant capacity and phytochemical c...
This study aims to determine the effect of raw potato tubers’ exposure to UV-C radiation and semi-products soaking in water on the content of acrylamide in the dry matter of French fries. The French fries were prepared from tubers of the Innova...
This study addresses the escalating challenges posed by forest drought and wildfires, emphasizing the critical need to monitor forest conditions to mitigate associated risks. While traditional optical sensors have proven valuable for vegetation surfa...
Land use types can cause changes in soil chemical characteristics, such as altering soil C, N, and P contents and distribution. The aim of this study was to investigate the status of soil C, N, P and other nutrient contents and their stoichiometric r...
of 586