The crystal structures, mechanical properties, and electrical properties of Cu doped SnO2, F doped SnO2, and Cu F co-doped SnO2 were studied by using the first-principles method. Meanwhile, AgSnO2, AgSnO2-F, AgSnO2-Cu, and AgSnO2-Cu-F contacts were p...
As an important component carrying the core function and service life of switching appliances, the selection and improvement of electrical contact materials is of great significance. AgSnO2, which is non-toxic, environmentally friendly and has excell...
The inferior electrical conductivity and elevated hardness of AgSnO2 electrical contact materials have impeded their development. To investigate the effects of Co, Bi, and La doping on the stability and electrical properties of AgSnO2, this study est...
Due to the shortcomings of AgSnO2 as a contact material, models of SnO2, Y-SnO2, Mo-SnO2, and Y-Mo-SnO2 were built to calculate their electrical and mechanical properties based on the first principles of density functional theory. The Y-Mo co-doped S...
The first-principles method based on density functional theory was used to analyze the impurity formation energies, energy bands, density of states, electron overlap population and elastic modulus of SnO2, SnO2–Ni, SnO2–N and SnO2–Ni–N. SnO2 powders...
Biodegradable composites with antimicrobial properties were prepared with microparticles of silver stannate (AgSnO2) and poly(butylene adipate-co-terephthalate) (PBAT) and tested for applications in food packaging. The PBAT matrix was synthesized and...
This study presents core/shell Ag/SnO2 nanowires (Ag/SnO2NWs) as a new photocatalyst for the rapid degradation of organic compounds by the light from the visible range. AgNWs after coating with a SnO2 shell change optical properties and, due to red s...
Ag-SnO2 composites are widely adopted as electrical contact materials in low-voltage apparatuses. Ongoing upgrades of electrical devices impose higher standards for their mechanical strength, machinability, and electrical conductivity, among which th...
This study investigated the synthesis of Ag-SnO2-ZnO by powder metallurgy methods and their subsequent electrical contact behavior. The pieces of Ag-SnO2-ZnO were prepared by ball milling and hot pressing. The arc erosion behavior of the material was...
Ag@SnO2 nanosheets were prepared through a hydrothermal method followed by heat treatment and a liquid reduction process. Many Ag nanoparticles (Ag NPs) were dispersed uniformly over the surface of the SnO2 nanosheets. The thickness of the SnO2 nanos...
The anatase/rutile mixed crystal TiO2 was prepared and modified with Ag decoration and SnO2 coupling to construct a Ag@SnO2/anatase/rutile composite photocatalytic material. The crystal structure, morphology, element valence, optical properties and s...
Silver oxide-doped tin oxide (SnAg2O3) nanoparticles were synthesized and different spectroscopic techniques were used to structurally identify SnAg2O3 nanoparticles. The reduction of 4-nitrophenol (4-NP), congo red (CR), methylene blue (MB), and met...
Among oxide semiconductors, p-type Mn3O4 systems have been exploited in chemo-resistive sensors for various analytes, but their use in the detection of H2, an important, though flammable, energy vector, has been scarcely investigated. Herein, we repo...
To investigate the effect of aging at 580 °C in wet air (humid aging) on the oxygen adsorption on the surface of SnO2 particles, the electric properties and the sensor response to hydrogen in dry and humid atmospheres for SnO2 resistive-type gas sens...
In this study, we employed a straightforward synthetic approach using the sol-gel method to fabricate a novel photocatalyst, Ag and N co-doped SnO2 (Ag-N-SnO2). The synthesized photocatalysts underwent characterization through various techniques incl...
A facile hydrothermal method was employed to synthesize silver–reduced graphene oxide (Ag/rGO) plasmon-modified SnO2 composite, by incorporating Ag–reduced graphene oxide (Ag/rGO) into SnO2 nanorods as a photoanode for assembling a self-p...
In this study, the Ag3PO4/SnO2 heterojunction on carbon cloth (Ag3PO4/SnO2/CC) was successfully fabricated via a facile two-step process. The results showed that the Ag3PO4/SnO2/CC heterojunction exhibited a remarkable photocatalytic performance for...
In this paper, pure and Ag-doped SnO2 nanospheres were synthesized by hydrothermal method and characterized via X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), and X-ray photo...
Intermetallic compounds (IMCs) growth can simultaneously bring about low-resistance electrical pathways and drastically reduce joint lifetime. Recently, incorporated trace nanoparticles into the free-Pb solder were found to promote the performance of...
Impedance-type humidity sensors were fabricated via one-step UV-irradiation photopolymerization of Ag microwires (Ag MWs), polypyrrole (PPy) and SnO2 ternary composite (Ag MWs/PPy/SnO2) films on an alumina substrate. X-ray diffractometry (XRD), Fouri...
Contaminants of emerging concerns (CECs) spread across a wide range of organic product compounds. As biorecalcitrants, their removal from conventional wastewater treatment systems remains a herculean task. To address this issue, heterogenous solar dr...
A high long-term stability is crucial for room-temperature gas-sensitive metal oxide semiconductors (MOSs) to find practical applications. A series of Pd-SnO2 mixtures with 2, 5, and 10 wt% Pd separately were prepared from SnO2 and Pd powders. Throug...
Photocatalysis represents an efficient and environmentally friendly technology for wastewater treatment. In this study, a novel composite material, comprising AgBr nanospheres anchored on the surface of SrSnO3 nanorods, was synthesized via a co-preci...
Based on the necessity and urgency of detecting infectious disease marker procalcitonin (PCT), a novel unlabeled photoelectrochemical (PEC) immunosensor was prepared for the rapid and sensitive detection of PCT. Firstly, SnO2 porous nanoflowers with...
As a new type of promising semiconductor photocatalyst, SnO2 cannot be widely applied due to its low utilization efficiency to visible light and swift recombination of photogenerated electrons and holes. These drawbacks were effectively overcome by p...
In order to find solutions to current worldwide environmental problems, it is crucial to develop sustainable nanomaterials, ideally with multifunctional properties. Considering this, novel TiO2-SnO2@NMs (noble metals: Au and Ag) composites, for use a...
Colloidal quantum dot (CQD) near-infrared photodetectors have attracted a lot of interest in the fields of optical communications, environmental surveillance, imaging technologies, and wearable sensors, due to their tunable bandgaps and flexible solu...
Herein, an ultra-sonication technique followed by a photoreduction technique was implemented to prepare silver nanoparticle-decorated Chitosan/SrSnO3 nanocomposites (Ag-decorated Chitosan/SrSnO3 NCs), and they were successively used as electron-sensi...
This paper demonstrates an acetylene gas sensor based on an Ag-decorated tin dioxide/reduced graphene oxide (Ag–SnO2/rGO) nanocomposite film, prepared by layer-by-layer (LbL) self-assembly technology. The as-prepared Ag–SnO2/rGO nanocomposite was cha...
The Xi’ao Cu-Sn polymetallic deposit is located in the inner alteration zone of the Laoka granite. The ore bodies extend to 400 m in the granite rock and primarily occur with fluorite and potassic alterations. Two cassiterite samples of altered...
The key to developing highly active α-Fe2O3-based photocatalysts is to improve the charge separation and efficiently utilize the electrons with sufficient thermodynamic energy. Herein, α-Fe2O3 nanosheets (FO) were synthesized using a meta...
Recently, the production of new photocatalytic materials has attracted considerable attention as a promising strategy to mitigate anthropogenic environmental degradation. In this study, cement paste composites (water/cement ratio = 0.5) were prepared...
To enhance the service life and operational precision of Ti-based aerospace gears, sinusoidal closed-cycle structures containing S (SnCuAg), G (Graphene), A (Al2O3), SG, SA and SGA are fabricated using laser additive manufacturing and high-temperatur...
This study investigates the shear strength and aging characteristics of Sn-3.0Ag-0.5Cu (SAC 305)/Cu joints by the addition of ZrO2 nanoparticles (NPs) having two different particle size: 5–15 nm (ZrO2A) and 70–90 nm (ZrO2B). Nanocomposite...
The article presents the influence of mechanical alloying and plastic consolidation on the resistance to arc erosion of the composite Ag–Re material against the selected contact materials. The following composites were selected for the tests: Ag90Re1...
The effect of type (AgInS2, SnS, CuS2, Bi2S3) and amount (5, 10, 15 wt%) of quantum dots (QDs) on the surface properties and photocatalytic activity of QDs-sensitized TiO2 composite, was investigated. AgInS2, SnS, CuS2, Bi2S3 QDs were obtained by hot...
The properties of Sn99Ag0.3Cu0.7 (SACX0307) solder alloy reinforced with ZnO nanoparticles were investigated. The primary ZnO particle sizes were 50, 100, and 200 nm. They were added to a solder paste at a ratio of 1.0 wt %. The wettability, the void...
This paper presents a comparative analysis of H2S sensor properties of nanocrystalline SnO2 modified with Ag nanoparticles (AgNPs) as reference sample or Ag organic complexes (AgL1 and AgL2). New hybrid materials based on SnO2 and Ag(I) organometalli...
Silver (Ag) has difficult forming strong bonding with oxides due to its deep d band beneath the Fermi level and completely filled 4d orbital. Thus, it is difficult to fabricate silver-based composites with superior plasticity and processability becau...
Two-terminal, non-volatile memory devices are the fundamental building blocks of memory-storage devices to store the required information, but their lack of flexibility limits their potential for biological applications. After the discovery of two-di...
This study investigated the influence of reinforcing 0.50 wt.% of titanium oxide (TiO2) and aluminium oxide (Al2O3) nanoparticles on the wettability performance of a Sn-3.0Ag-0.5Cu (SAC305) solder alloy. The thermal properties of the SAC305 nanocompo...
The application of a non-stationary regime of temperature modulation in metal oxide semiconductor sensor based on SnO2–Ag leads not only to a strongly increased sensor response, but also to a considerably improved sensor selectivity toward hydrogen s...
Recently, 3D packaging has been regarded as an important technical means to continue Moore’s Law. However, excessive stacking will increase the longitudinal dimension, and one chip with high-density bondings packaging is still needed. Thus, it...
The paper presents the results of an investigation of the nanostructure, elements, and phase composition of thin (100–140 nm) tin dioxide films obtained via magnetron sputtering and containing Ag, Y, Sc, Ag + Y, and Ag + Sc additives in the vol...
Several reactor configurations have been tested for catalytic propane dehydrogenation employing Pt-Sn/MgAl2O4 as a catalyst. Pd-Ag alloy membranes coupled to the multifunctional Two-Zone Fluidized Bed Reactor (TZFBR) provide an improvement in propane...
This study is an investigation of high-humidity aging effects on the total volatile organic compound (T–VOC) gas-sensing properties of platinum, palladium, and gold-loaded tin oxide (Pt,Pd,Au/SnO2) thick films. The sensor responses of the high-humidi...
The study was designed to investigate the synergic effect of Ti and Sn in the active metal brazing of Al2O3 ceramic to copper brazed, using the multicomponent Ag-Cu-Zr filler alloy. Numerous fine and hexagonal-shaped rod-like ternary intermetallic (Z...
The cytotoxicity-bioassay-guided fractionation of the ethanol extract from the marine sponge Guitarra abbotti, whose 1-O-alkyl-sn-glycerol ethers (AGEs) have not been investigated so far, led to the isolation of a complex lipid fraction containing, a...
Decoration of 2D semiconductor structures with heterogeneous metal quantum dots has attracted considerable attention due to advanced optical, electrical, and catalytic properties that result from the large surface-to-volume ratio associated with thes...
Volatile organic compounds (VOCs), often invisible but potentially harmful, are prevalent in industrial and laboratory settings, posing health risks. Detecting VOCs in real-time with high sensitivity and low detection limits is crucial for human heal...
of 5