To reveal the effect of chlorine substituents in the ring of aromatic amine on the synthesis process of benzoxazine monomer and on its polymerization ability, as well as to develop a fire-resistant material, a previously unreported benzoxazine monome...
A novel diaminodiphenylmethane (DDM) modified ammonium polyphosphate (APP) flame retardant, DDP, was successfully synthesized via ion-exchange reaction. DDP was introduced into epoxy resins (EPs) to reduce flammability. A comparable level of DDP exer...
Schiff base ligands are used in complexation with metals such as V(II) for the enantioselective oxidation of sulfides to chiral sulfoxides.[...]
Five new coordination compounds that included three coordination polymers and two supramolecular complexes were obtained by reactions of different cadmium salts (tetrafluoroborate, nitrate, and perchlorate) with dianiline chromophores, 4,4′-dia...
Buoyancy material is a type of low-density and high-strength composite material which can provide sufficient buoyancy with deep submersibles. A new buoyancy material with N,N,N′,N′-tetraepoxypropyl-4,4′-diaminodiphenylmethane epoxy...
This study prepared 4,4-diaminodiphenylmethane (DDM)-functionalized graphene oxide (GO)@silica dioxide (SiO2) nano-composites through amidation reaction and low-temperature precipitation. The resulting modified GO, that was DDM−GO@SiO2. The stu...
Isatin (1H-indole-2,3-dione) was first obtained by Erdman and Laurent in 1841 as a product from the oxidation of indigo by nitric and chromic acids [1].[...]
The introduction of nanoparticles and their homogeneous distribution in the polymer matrix, as well as their size, can have a significant effect on the mechanical properties of composite materials. In this work, we studied the mechanical characterist...
Uniform alignment of rigid-rod liquid crystal (LC) molecules under applied voltage is critical for achievement of high-quality display for thin-film transistor-driven liquid crystal display devices (TFT-LCDs). The polymeric components that can induce...
The synthesis of five novel homodimers is reported based on the anilinoisoquinolinequinone scaffold. In these twin-drug derivatives, two units of the anilinoquinone pharmacophores are linked through a methylene spacer. The formation of dimers was ach...
This work aimed to investigate the thermal properties of phosphorus-modified epoxy resin obtained from eugenol derivatives and cured with different amines: aliphatic—triethylenetetramine (TETA); aromatic—diaminodiphenylmethane (DDM); and...
Epoxy/Polycaprolactone (PCL) blends cured with a conventional diamine (4,4′-diaminodiphenylmethane, DDM) and with different amounts of a disulfide containing diamine (4, 4´-dithioaniline, DSS) were prepared through melting. The curing pro...
The presented work is devoted to reactions of obtaining 4,4’-Diaminodiphenylmethane (MDA) in the presence of a catalyst model. The work describes the importance of studying the MDA obtaining process and the possibility of the cellular automata...
To overcome the high flammability and brittleness of epoxy resins without sacrificing their glass transition temperature (Tg) and mechanical properties, three epoxy-terminated hyperbranched flame retardants (EHBFRs) with a rigid central core and diff...
A series of epoxy resins containing various trifluoromethyl groups were synthesized and thermally cured with diaminodiphenylmethane (DDM) and aminophenyl sulfone (DDS). All epoxy resins exhibited excellent thermal stability with the glass transition...
In order to synthesize a new kind of buoyancy material with high-strength, low-density and low-water-absorption and to study the curing reaction of tetraglycidylamine epoxy resin with an aromatic amine curing agent, the non-isothermal differential sc...
The adsorption behavior of small molecules at solid–liquid interfaces have become an important research topic in recent years. For example, small molecules of aniline pollutants will adsorb on solid surfaces with a massive discharge of industri...
Fracture toughness is a key property of epoxy resins with a high glass transition temperature (Tg), used in carbon fiber/epoxy composites for aerospace applications. Conventional toughening methods rely on adding toughening agents, often compromising...
In this study, rigid polyurethane (PU) and polyisocyanurate (PIR) foam samples made from renewable material (tall oil fatty acid) based polyols were analyzed by pyrolysis gas chromatography mass spectrometry (Py-GC/MS) to obtain information about the...
A nonterminal liquid crystal epoxy monomer is used to create an epoxy–amine network with a typical diamine 4,4′diaminodiphenylmethane. The plain matrix is compared to matrices modified with inorganic fillers: TiO2 or SiO2. Conditions of t...
Interlaminar shear strength (ILSS) and compressive strength are two of the most critical properties of carbon fiber-reinforced polymer (CFRP). In this report, three types of epoxy resins—4,4’-diaminodiphenylmethane epoxy resin (AG-80), bi...
Cobalt(II) chloride (CoCl2) being in the vicinity of polyimide chains entails modifications in terms of the molecular dynamics, which are mainly governed by the possible presence of amic acid residual groups, by the transition-metal-type characterist...
To meet the environmental protection and flame retardancy requirements for epoxy resins (EPs) in certain fields, in this study, a novel triazine-ring-containing DOPO-derived compound (VDPD), derived from vanillin, 2,4-Diamino-6-phenyl-1,3,5-triazine,...
The room temperature ionic liquid (IL) 1-butyl-3-methylimidazolium bis-(trifluorometanesulfonyl)imide BMIm[NTf2] was used as a novel medium for improvement of separation and quantization of 16 aromatic amines typically present as contaminants in cons...
Phenol-diaminodiphenylmethane-based benzoxazine (P-ddm)/phthalocyanine copolymer was prepared by using P-ddm resin as matrix and 3,10,17,24-tetra-aminoethoxy lead phthalocyanine (APbPc) as additive. Fourier-transform infrared (FTIR), differential sca...
Liquid hydrogen (LH2) storage using carbon-fiber-reinforced composite pressure vessels is facing increasing demands in aerospace engineering. However, hydrogen permeation in epoxy resin matrixes seriously jeopardizes the function and safety of the cr...
High-strength and high-modulus epoxy resins are key elements for preparing carbon-fiber-reinforced polymer composites, which play an irreplaceable role in aerospace. In this study, five optimal epoxy systems were developed utilizing the reverse desig...
Fabricating polyimide (PI) membranes with outstanding anti-plasticization ability and gas separation performance remains a challenge. In this study, two novel diamine monomers, DAMBO (methyl 3,5-diamino-4-methylbenzoate) and DAPGBO (3-hydroxypropyl 3...
Epoxy materials are an important class of thermosets whose properties strongly depend on the used formula, the curing parameters, and many available hardeners. Achieving desired properties such as enhanced thermal stability, extended lifetime, or sel...
Polyimides (PIs), recognized for their exceptional thermal stability, are extensively employed in advanced applications, including aerospace, flexible displays, flexible solar cells, flame-retardant materials, and high-temperature filtration material...
Epoxy vitrimers appear as a promising alternative to common epoxy thermoset composites. Nevertheless, the possibilities of applying these materials are limited due to their high flammability which may cause high fire risks. To date, the flame-retarda...
In this study, a flame-retardant additive with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) groups denoted DSD was successfully synthesized from DOPO, 4,4′-diaminodiphenyl sulfone (DDS), and salicylaldehyde. The chemical structure...
The formation of polymeric micro-patterns on various substrates via a photolithography procedure has been widely used in semiconductor fabrication. Standard polymer patterns are usually fabricated via photosensitive polymer varnishes, in which large...
The investigation of new spin-crossover (SCO) compounds plays an important role in understanding the key design factors involved, informing the synthesis of materials for future applications in electronic and sensing devices. In this report, three bi...
Negative photosensitive polyimides (PSPIs) with the photo-patterned ability via the photocrosslinking reactions induced by the i-line (365 nm) and h-line (426 nm) emitting wavelengths in high-pressure mercury lamps have been paid increasing attention...
The epoxy resin-based (ESB) intumescent flame-retardant coatings were modified with 1,4-butanediol diglycidyl ether (14BDDE) and butyl glycidyl ether (BGE) as diluents and T403 and 4,4′-diaminodiphenylmethane (DDM) as curing agents, respectivel...
This work explores the effect of lattice solvent on the observed solid-state spin-transition of a previously reported dinuclear Fe(II) triple helicate series 1–3 of the general form [FeII2L3](BF4)4(CH3CN)n, where L is the Schiff base condensati...