521 Results Found

With the rapid development of research into flexible electronics and wearable electronics in recent years, there has been an increasing demand for flexible power supplies, which in turn has led to a boom in research into flexible solid-state lithium-...

Solid-state lithium metal batteries offer superior energy density, longer lifespan, and enhanced safety compared to traditional liquid-electrolyte batteries. Their development has the potential to revolutionize battery technology, including the creat...

Solid-state lithium metal batteries (LMBs) have become increasingly important in recent years due to their potential to offer higher energy density and enhanced safety compared to conventional liquid electrolyte-based lithium-ion batteries (LIBs). Ho...

The application of rechargeable lithium batteries involves all aspects of our daily life, such as new energy vehicles, computers, watches and other electronic mobile devices, so it is becoming more and more important in contemporary society. However,...

Traditional lithium–air batteries (LABs) have been seriously affected by cycle performance and safety issues due to many problems such as the volatility and leakage of liquid organic electrolyte, the generation of interface byproducts, and shor...

High safety gel polymer electrolyte (GPE) is used in lithium metal solid state batteries, which has the advantages of high energy density, wide temperature range, high safety, and is considered as a subversive new generation battery technology. Howev...

Covalent organic frameworks (COFs) are a class of crystalline porous organic polymers with periodic networks that are constructed from small molecular units via covalent bonds, which have low densities, high porosity, large specific surface area, and...

The performance and durability of lithium metal solid-state batteries are governed by the dynamic evolution of the lithium/solid-electrolyte (Li/SSE) interface, where electrochemical reactions, mass transport, and mechanical constraints are intrinsic...

The growing demand for high-energy, safe, and sustainable lithium-ion batteries has increased interest in nickel-rich cathode materials and solid-state electrolytes. This study presents a scalable wet-processing method for fabricating composite catho...

Solid-state lithium batteries (SSLBs) have made significant progress in recent decades in response to increasing demands for improved safety and higher energy density. Nonetheless, the current state SSLBs are not suitable for wide commercial applicat...

Lithium-ion batteries are popular energy storage devices due to their high energy density. Solid electrolytes appear to be a potential replacement for flammable liquid electrolytes in lithium batteries. This inorganic/hybrid solid electrolyte is a co...

Laser material processing is emerging as a critical manufacturing technology in the advancement of solid-state lithium batteries (SSLBs), offering numerous advantages in precision, efficiency, and versatility. This mini-review explores the applicatio...

Ni-rich cathodes are expected to serve as critical materials for high-energy lithium-ion batteries. Increasing the Ni content can effectively improve the energy density but usually leads to more complex synthesis conditions, thus limiting its develop...

Along with the soaring demands for all-solid-state thin-film lithium-ion batteries, the problem of their energy density rise becomes very acute. The solution to this problem can be found in development of 3D batteries. The present work deals with the...

All solid-state room-temperature lithium-sulfur (Li-S) batteries have gained increasing attention due to their ability to eliminate the polysulfides shuttle effects and the safety dangers associated with the liquid electrolytes. Herein, a novel compo...

Solid polymer electrolytes (SPEs) are seen as the key component in the development of solid-state lithium batteries (SSLBs) by virtue of their good processability and flexibility. However, poor mechanical strength, low room-temperature lithium-ion (L...

Solid-state lithium batteries (SSLBs) have emerged as a promising alternative to conventional lithium-ion systems due to their superior safety profile, higher energy density, and potential compatibility with lithium metal anodes. However, a major cha...

Solid-state reaction was used for Li₇La₃Zr₂O₁₂ material synthesis from Li₂CO₃, La₂O₃ and ZrO₂ powders. Phase investigation of Li₇La₃Zr₂O₁₂ was carried out by x-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive x-ray spec...

The challenge of safety problems in lithium batteries caused by conventional electrolytes at high temperatures is addressed in this study. A novel solid electrolyte (HKUST-1@IL-Li) was fabricated by immobilizing ionic liquid ([EMIM][TFSI]) in the nan...

All-solid-state lithium batteries (ASSLBs) have gained enormous interest due to their potential high energy density, high performance, and inherent safety characteristics for advanced energy storage systems. Although solid-state ceramic (inorganic) e...

All-solid-state lithium–sulfur batteries (ASSLSBs) couple the high theoretical energy density of sulfur (2600 Wh kg⁻¹) with the safety and polysulfide-shuttle suppression advantages of solid electrolytes (SEs). In practice, however, slugg...

Solid-state lithium sulfur batteries are becoming a breakthrough technology for energy storage systems due to their low cost of sulfur, high energy density and high level of safety. However, its commercial application has been limited by the poor ion...

All-solid-state batteries have garnered significant attention due to their potential to exceed the energy density of conventional lithium-ion batteries, particularly when alloying-based materials or lithium metal anodes are used. However, achieving c...

All-solid-state batteries have attracted wide attention for high-performance and safe batteries. The combination of solid electrolytes and lithium metal anodes makes high-energy batteries practical for next-generation high-performance devices. Howeve...

All-solid-state batteries (SSBs) are prospective candidates for a range of energy accumulation systems, delivering higher energy densities compared to batteries which use liquid electrolytes. Amongst the numerous solid-state electrolytes (SEs), sulfi...

Solid-state argyrodite electrolytes are promising candidate materials to produce safe all-solid-state lithium batteries (ASSLBs) due to their high ionic conductivity. These batteries can be used to power electric vehicles and portable consumer electr...

The development of high-performance and stable solid-state lithium batteries (SSBs) is critical for advancing next-generation energy storage technologies. This study investigates LATP (Li_1.3Al_0.3Ti_1.7(PO₄)₃) coatings to enhance the electrochemical pe...

The effect of the composition of liquid electrolytes in the bulk and at the interface with the LiFePO₄ cathode on the operation of a solid-state lithium battery with a nanocomposite polymer gel electrolyte based on polyethylene glycol diacrylate and...

Li₃V₂(PO₄)₃ (LVP) is one of the candidates for high-energy-density cathode materials matching lithium metal batteries due to its high operating voltage and theoretical capacity. However, the inevitable side reactions of LVP with a traditional liquid-...

A solid-state polymer electrolyte membrane is formed by blending poly(vinylidene fluoride-co-hexafluoropropylene) with the synthesized copolymer of poly(methyl methacrylate-co-1-vinyl-3-butyl-imidazolium bis(trifluoromethanesulfonyl)imide, in which l...

The results from measuring the capacity of thin-film solid-state lithium-ion batteries (SSLIBs) $\mathrm{T}\mathrm{i}|\mathrm{S}\mathrm{i}@\mathrm{O}@\mathrm{A}\mathrm{l}|\mathrm{L}\mathrm{i}\mathrm{P}\mathrm{O}\mathrm{N}\left|\mathrm{L}\mathrm{i}\mathrm{C}\mathrm{o}{\mathrm{O}}_2\right|\mathrm{T}\mathrm{i}$, $\mathrm{T}\mathrm{i}|\mathrm{S}\mathrm{i}@\mathrm{O}@\mathrm{A}\mathrm{l}|\mathrm{L}\mathrm{i}\mathrm{P}\mathrm{O}\mathrm{N}\left|\mathrm{L}{\mathrm{i}}_{\mathrm{x}}{\mathrm{V}}_2{\mathrm{O}}_5\right|\mathrm{T}\mathrm{i}$, and $\mathrm{T}\mathrm{i}\left|\mathrm{L}\mathrm{i}\mathrm{P}\mathrm{O}\mathrm{N}\right|\mathrm{L}\mathrm{i}\mathrm{C}\mathrm{o}{\mathrm{O}}_2|\mathrm{T}\mathrm{i}$ at different charge currents are reported. It is shown that the dependence...

In this study, a series of crosslinked membranes were prepared as solid polymer electrolytes (SPEs) for all-solid-state lithium ion batteries (ASSLIBs). An epoxy-containing copolymer (glycidyl methacrylate-co-poly(ethylene glycol) methyl ether methac...

The garnet Li₇La₃Zr₂O₁₂ (LLZO) has been widely investigated because of its high conductivity, wide electrochemical window, and chemical stability with regards to lithium metal. However, the usual preparation process of LLZO requires high-temperature...

All-solid-state lithium-ion batteries (ASSBs) have a wide operating temperature range (−40 °C to +120 °C) and are expected to be applied to lunar exploration, which has become increasingly active in recent years. Since a ground developm...

All-solid-state lithium metal batteries (ASSLMBs) promise enhanced safety and high energy density, yet their solid–solid interfaces create mechanical constraints absent from conventional liquid-electrolyte cells. Electrochemical reactions, ion...

All-solid-state lithium batteries (ASSLBs) are widely regarded as a promising next-generation energy-storage technology because they offer the potential to simultaneously improve the safety and energy density of conventional lithium battery systems....

A battery charger for solid-state lithium battery packs was developed and implemented. The power stage used a phase-shifted full-bridge converter integrated with a current-doubler rectifier and synchronous rectification. Dual voltage and current cont...

Solid-state lithium batteries exhibit high-energy density and exceptional safety performance, thereby enabling an extended driving range for electric vehicles in the future. Solid-state electrolytes (SSEs) are the key materials in solid-state batteri...

Developing a solid polymer electrolyte with superior flame retardancy and lithium-ion transportation properties is still a challenge. Herein, an intrinsic silicon/phosphorus co-flame retardant polymer solid electrolyte was prepared by using polyethyl...

Solid-state lithium-ion batteries are gaining attention as a promising alternative to traditional lithium-ion batteries. By utilizing a solid electrolyte instead of a liquid, these batteries offer the potential for enhanced safety, higher energy dens...

Considering the safety problem that is caused by liquid electrolytes and Li dendrites for lithium batteries, a new quasi-solid-state polymer electrolyte technology is presented in this work. A layer of 1,4-phenylene bridged polysilsesquioxane (PSiO)...

Different classes of solid electrolytes for all-solid-state batteries (ASSB) are currently being investigated, with each of them suitable for a different ASSB concept. Their combination in hybrid battery cells enables the use of their individual bene...

We report a new process technique for electrode manufacturing for all solid-state batteries. Porous electrodes are manufactured by a tape casting process and subsequently infiltrated by a plastic crystal polymer electrolyte (PCPE). With a following i...

Lithium–sulfur batteries (LSBs) represent a promising next-generation energy storage system, with advantages such as high specific capacity (1675 mAh g⁻¹), abundant resources, low price, and ecological friendliness. During the application...

The low ionic conductivity, narrow electrochemical window, poor interfacial stability with lithium metal, and non-degradability of raw materials are the main problems of solid polymer electrolytes, restricting the development of lithium solid-state b...

Solid-state lithium batteries have attracted considerable research attention for their potential advantages over conventional liquid electrolyte lithium batteries. The discovery of lithium solid-state electrolytes (SSEs) is still undergoing to solve...

The all-solid-state lithium battery (ASSLIB) is one of the key points of future lithium battery technology development. Because solid-state electrolytes (SSEs) have higher safety performance than liquid electrolytes, and they can promote the applicat...

Cr₈O₂₁ can be used as the cathode material in all-solid-state batteries with high energy density due to its high reversible specific capacity and high potential plateau. However, the strong oxidation of Cr₈O₂₁ leads to poor compatibility with polymer...

Poly(ethylene oxide) (PEO)-based electrolyte is considered to be one of the most promising polymer electrolytes for lithium metal batteries. However, a narrow electrochemical stability window and poor compatibility at electrode-electrolyte interfaces...

All-solid-state lithium-ion batteries (ASSLBs) are attractive energy storage devices because of their excellent gravimetric and volumetric capacity and ability to supply high power rates. Porous silicon (Si) is a promising material for an anode in li...