Skip to Content

2,045 Results Found

  • Article
  • Open Access
22 Citations
4,402 Views
12 Pages

Crystallization and Performance of Polyamide Blends Comprising Polyamide 4, Polyamide 6, and Their Copolymers

  • Yajing Zhang,
  • Mingda Wang,
  • Di Zhang,
  • Yibing Wang and ,
  • Li Wang,
  • Yongjun Qiu,
  • Liquan Wang,
  • Tao Chen and
  • Liming Zhao
  • + 4 authors+ 0 author

14 August 2023

Polyamide 4 (PA4) is a biobased and biodegradable polyamide. The high hydrogen bond density of PA4 bestows it with a high melting point that is close to its thermal decomposition temperature, thereby limiting the melt processing of PA4. In this study...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
5 Citations
1,792 Views
22 Pages

The Effect of Bio-Based Polyamide 10.10 and Treated Fly Ash on Glass-Fiber-Reinforced Polyamide 6 Properties

  • George-Mihail Teodorescu,
  • Zina Vuluga,
  • Toma Fistoș,
  • Sofia Slămnoiu-Teodorescu and ,
  • Jenica Paceagiu,
  • Cristian-Andi Nicolae,
  • Augusta Raluca Gabor,
  • Marius Ghiurea,
  • Cătălina Gîfu and
  • Rodica Mariana Ion
  • + 5 authors+ 0 author

16 July 2025

Increased concern for human health and the environment has pushed various industries to adopt new approaches towards satisfying modern regulations. Strategies to achieve these approaches include utilizing lightweight materials, repurposing waste mate...

(This article belongs to the Special Issue Fiber and Polymer Composites: Processing, Simulation, Properties and Applications, 3rd Edition)
  • Article
  • Open Access
38 Citations
9,445 Views
17 Pages

A Novel Synthetic Strategy for Preparing Polyamide 6 (PA6)-Based Polymer with Transesterification

  • Shengming Zhang,
  • Jingchun Zhang,
  • Lian Tang,
  • Jiapeng Huang and ,
  • Yunhua Fang,
  • Peng Ji,
  • Chaosheng Wang and
  • Huaping Wang
  • + 3 authors+ 0 author

3 June 2019

In the polymerization of caprolactam, the stoichiometry of carboxyl groups and amine groups in the process of melt polycondensation needs to be balanced, which greatly limits the copolymerization modification of polyamide 6. In this paper, by combini...

(This article belongs to the Collection Design and Synthesis of Polymers)
  • Article
  • Open Access
7 Citations
3,144 Views
15 Pages

Mechanical Reinforcement of Polyamide 6 by Cold Hydrostatic Extrusion

  • Monika Skorupska,
  • Mariusz Kulczyk,
  • Sylwia Przybysz,
  • Jacek Skiba and ,
  • Jan Mizeracki and
  • Joanna Ryszkowska
  • + 1 author+ 0 author

13 October 2021

This paper presents the effect of severe plastic deformation obtained using the cold hydrostatic extrusion (HE) method on the mechanical and structural properties of polyamide 6 (PA6). As a result of the plastic strain, a significant increase in ulti...

(This article belongs to the Section Polymeric Materials)
  • Article
  • Open Access
9 Citations
3,766 Views
17 Pages

11 January 2022

The presented work’s aim is the application of low-power laser treatment for the enhancement of interfacial micromechanical adhesion between polyamide 6 (filled with glass fiber) and aluminum. A fiber laser beam was used to prepare micro-patter...

(This article belongs to the Special Issue Polymer Composites for Structural Applications)
  • Article
  • Open Access
21 Citations
5,052 Views
28 Pages

Characterisation and FE Modelling of the Sorption and Swelling Behaviour of Polyamide 6 in Water

  • Anna Katharina Sambale,
  • Michael Stanko,
  • Jessica Emde and
  • Markus Stommel

4 May 2021

Polyamide 6 (PA6) is known to absorb water from its environment due to its chemical structure. This water absorption leads to a change in the mechanical properties as well as an increase in volume (swelling) of the polyamide. In the present work, the...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
14 Citations
5,701 Views
13 Pages

25 June 2023

In order to adjust the properties of polyamide 6 (PA6) and expand its application, a new strategy of introducing an aromatic imide structure into the PA6 chain through the random copolymerization method is reported. The diimide diacid monomer was fir...

(This article belongs to the Special Issue Advances in the Processing and Application of Polymer and Its Composites II)
  • Feature Paper
  • Article
  • Open Access
18 Citations
6,055 Views
17 Pages

Characterisation and Modelling of Moisture Gradients in Polyamide 6

  • Anna Katharina Sambale,
  • Michael Maisl,
  • Hans-Georg Herrmann and
  • Markus Stommel

17 September 2021

Polyamide 6 (PA6) is able to absorb water from the surrounding air and bond to it by forming hydrogen bonds between the carbonamide groups of its molecular chains. Diffusion processes cause locally different water concentrations in the (component) cr...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
8 Citations
2,253 Views
15 Pages

Mechanical and Antimicrobial Properties of the Graphene-Polyamide 6 Composite

  • Paweł Głuchowski,
  • Marta Macieja,
  • Robert Tomala,
  • Mariusz Stefanski and ,
  • Wiesław Stręk,
  • Maciej Ptak,
  • Damian Szymański,
  • Konrad Szustakiewicz,
  • Adam Junka and
  • Bartłomiej Dudek
  • + 5 authors+ 0 author

12 July 2024

This paper presents the synthesis and characterization of graphene–polymer composites, focusing on their mechanical and antibacterial properties. Graphene flakes were obtained via an electrochemical method and integrated into polyamide 6 (PA6)...

(This article belongs to the Special Issue Advances in Polymer Matrix Composites for High Performance Applications)
  • Article
  • Open Access
29 Citations
6,849 Views
11 Pages

Hierarchical Porous Polyamide 6 by Solution Foaming: Synthesis, Characterization and Properties

  • Liang Wang,
  • Yu-Ke Wu,
  • Fang-Fang Ai,
  • Jie Fan and ,
  • Zhao-Peng Xia and
  • Yong Liu
  • + 1 author+ 0 author

27 November 2018

Porous polym er materials have received great interest in both academic and industrial fields due to their wide range of applications. In this work, a porous polyamide 6 (PA6) material was prepared by a facile solution foaming strategy. In this appro...

(This article belongs to the Special Issue Polymeric Foams)
  • Article
  • Open Access
9 Citations
3,191 Views
13 Pages

Studies on Modification of Polyamide 6 Plastics for Hydrogen Storage

  • Li Li,
  • Jiawei Zhao,
  • Xingguo Wang,
  • Qingquan Yang and ,
  • Xiang Wang and
  • Hua Yin
  • + 1 author+ 0 author

18 February 2025

Polyamide 6 (PA6) can be used as the liner material of a type IV hydrogen storage tank, but its high hydrogen permeability and poor low-temperature toughness limit its application in related fields. In this work, PA6 composites were prepared by intro...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
94 Citations
14,131 Views
12 Pages

5 December 2013

Pure polyamide 6 (PA6) and polyamide 6/carbon nanotube (PA6/CNT) composite samples with 0.5 weight percent loading of pristine or functionalized CNTs were made using a solution mixing technique. Modification of nanotube surface as a result of chemica...

  • Article
  • Open Access
32 Citations
4,818 Views
11 Pages

18 December 2019

With the rapid development of the automotive industry, there is also a significant need to improve the raw materials used. Therefore, the demand is increasing for polymer composites with a focus on mass reduction and recyclability. Thermoplastic poly...

  • Article
  • Open Access
26 Citations
3,561 Views
11 Pages

Thermal and Quasi-Static Mechanical Characterization of Polyamide 6-Graphene Nanoplatelets Composites

  • Pietro Russo,
  • Francesca Cimino,
  • Antonio Tufano and
  • Francesco Fabbrocino

The growing demand for lightweight and multifunctional products in numerous industrial fields has recently fuelled a growing interest in the development of materials based on polymer matrices including graphene-like particles, intrinsically character...

(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
  • Article
  • Open Access
2 Citations
1,451 Views
14 Pages

Improvement of Flame Retardancy on Polyamide 6 Composites via Melamine Polyphosphate-Modified Carbon Nanotubes

  • Xuejun Shi,
  • Xiangxiang Du,
  • Xiaodong Zhao,
  • Meiying Wang and ,
  • Quanshuai Liu,
  • Bo Hong,
  • Yongjun Han,
  • Haoxuan Sun and
  • Wei Yuan
  • + 4 authors+ 0 author

6 March 2026

Melamine polyphosphate (MPP) is a widely employed additive-type flame retardant for polyamide 6. Generally, a higher loading of MPP leads to improved flame retardancy of polyamide 6 composites. Nevertheless, excessive addition tends to cause problems...

(This article belongs to the Special Issue Advances in Flame-Retardant Polymer Composites)
  • Article
  • Open Access
16 Citations
6,257 Views
13 Pages

Compatibilization of Polypropylene/Polyamide 6 Blend Fibers Using Photo-Oxidized Polypropylene

  • Francesco Paolo La Mantia,
  • Manuela Ceraulo,
  • Maria Chiara Mistretta,
  • Luigi Botta and
  • Marco Morreale

27 December 2018

The use of polyamide/polyolefin blends has gained importance and concern for years, but they also show some issues to be adequately addressed, such as the incompatibility between the two components. This is usually overcome by using suitable compatib...

(This article belongs to the Special Issue Polymer Blends and Compatibilization 2018)
  • Article
  • Open Access
29 Citations
7,883 Views
11 Pages

Polyamide 6 Nanocomposites with Inorganic Particles Modified with Three Quaternary Ammonium Salts

  • Edcleide Maria Araujo,
  • Amanda Melissa Damião Leite,
  • Rene Anisio da Paz,
  • Vanessa da Nóbrega Medeiros and ,
  • Tomas Jeferson Alves de Melo and
  • Hélio de Lucena Lira
  • + 1 author+ 0 author

2 November 2011

The purpose of this study was to obtain polyamide 6 nanocomposites with national organically modified clay with three quaternary ammonium salts. The obtained results confirm the intercalation of molecules of salt in the clay layers, and a good intera...

(This article belongs to the Special Issue Nanocomposites of Polymers and Inorganic Particles)
  • Article
  • Open Access
9 Citations
3,473 Views
21 Pages

22 September 2023

Increasing photon absorption by capturing light is an important way to increase the efficiency of photovoltaic devices. In this regard, the small optical band gap (Eg) and high absorption coefficient of Se-containing thin nanofilms make them ideal fo...

(This article belongs to the Special Issue Advanced Polymer and Thin Film for Sustainable Energy Harvesting)
  • Article
  • Open Access
18 Citations
4,352 Views
16 Pages

4 November 2021

Currently, fiber-reinforced thermoplastic composites are widely applied in structural applications. It has great potential to replace metal structures and provides advantages in weight reduction. In this study, the pretensioned unidirectional carbon...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
17 Citations
5,614 Views
17 Pages

20 April 2023

The effect of fusion temperature and duration on the nonisothermal crystallization kinetics of polyamide 6 (PA6) was investigated using differential scanning calorimetry (DSC) and a polarized optical microscope (OM). The rapid cooling method involved...

(This article belongs to the Special Issue Crystallization in Polymer Science)
  • Feature Paper
  • Article
  • Open Access
14 Citations
3,507 Views
14 Pages

28 February 2022

In this study, the possibility of adding nanocellulose and its dispersion to polyamide 6 (PA6), a polymer with a high melting temperature, is investigated using melt extrusion. The main challenges of the extrusion of these materials are achieving a h...

(This article belongs to the Special Issue Preparation, Characterization and Industrial Application of Nanocellulose)
  • Article
  • Open Access
32 Citations
8,401 Views
16 Pages

The Effect of Crystallinity on the Toughness of Cast Polyamide 6 Rods with Different Diameters

  • Miklós Odrobina,
  • Tamás Deák,
  • László Székely,
  • Tamás Mankovits and ,
  • Róbert Zsolt Keresztes and
  • Gábor Kalácska
  • + 1 author+ 0 author

2 February 2020

The present paper concentrates on the toughness and the degree of crystallinity of the magnesium-catalyzed polyamide 6 rods cast in different diametres, which are commonly used for gear manufacturing. Its toughness cannot be regarded as a constant fe...

(This article belongs to the Special Issue Multiphase Structure of Polymeric Materials and Physical Properties)
  • Article
  • Open Access
5 Citations
4,075 Views
11 Pages

16 October 2022

It is highly expected to develop a simple and effective method to reinforce polyamide 6 (PA6) to enlarge its application potential. This is challenging because of frequently encountered multi-component phase separations. In this paper, we propose a n...

(This article belongs to the Special Issue Advanced Multi-Functional Polymer Composites)
  • Article
  • Open Access
9 Citations
2,803 Views
20 Pages

Recycling Continuous Glass Fibre-Reinforced Polyamide 6 Laminates via Compression Moulding

  • Aditya Prakash Shembekar,
  • Jason Yu,
  • Mingfu Zhang,
  • Chris Griffin and
  • Dipa Ray

7 August 2025

End-of-life (EoL) continuous glass fibre-reinforced polyamide 6 composites (cGF/PA6) are commonly recycled by shredding and milling, followed by injection moulding, often resulting in lower mechanical properties of second-generation products, primari...

(This article belongs to the Section Circular and Green Sustainable Polymer Science)
  • Article
  • Open Access
692 Views
23 Pages

Additive Manufacturing of Polyamide-6 Preforms for Scalable Thermal Drawing of Structured Fibers

  • Akila Bandara,
  • Ahmed Moustafa Abd-El Nabi,
  • Luka Morita and
  • Dan Sameoto

19 August 2026

Thermal drawing is a prominent, scalable method for transforming preforms with complex macroscopic morphologies into multifunctional microscopic fibers. With the intent to develop fibers with complex cross-sections for potential integration in soft r...

(This article belongs to the Special Issue Emerging Trends in Soft Robotics and Bioinspired Technologies)
  • Article
  • Open Access
16 Citations
5,235 Views
15 Pages

Effect of Bis (2-Aminoethyl) Adipamide/Adipic Acid Segment on Polyamide 6: Crystallization Kinetics Study

  • Yu-Hao Chen,
  • Palraj Ranganathan,
  • Chin-Wen Chen,
  • Yi-Huan Lee and
  • Syang-Peng Rwei

6 May 2020

The crystallization behavior of novel polyamide 6 (PA6) copolyamides with different amounts of bis (2-aminoethyl) adipamide/adipic acid (BAEA/AA) segment was investigated. The wide-angle X-ray diffraction (WAXD) results showed that as the amount of B...

(This article belongs to the Special Issue Thermal Analysis of Polymer Materials)
  • Article
  • Open Access
5 Citations
2,880 Views
24 Pages

26 October 2021

This study focuses on the problematic of polyamide 6 containing various concentrations of cross-linking agent that was exposed to electron radiation. It is important to improve the material properties of polymers as much as possible. This endeavor ca...

(This article belongs to the Section Polymeric Materials)
  • Article
  • Open Access
29 Citations
5,533 Views
17 Pages

Strong Polyamide-6 Nanocomposites with Cellulose Nanofibers Mediated by Green Solvent Mixtures

  • Pruthvi K. Sridhara,
  • Ferran Masso,
  • Peter Olsén and
  • Fabiola Vilaseca

20 August 2021

Cellulose nanofiber (CNF) as a bio-based reinforcement has attracted tremendous interests in engineering polymer composites. This study developed a sustainable approach to reinforce polyamide-6 or nylon-6 (PA6) with CNFs through solvent casting in fo...

(This article belongs to the Special Issue Synthesis, Properties and Applications of Polymeric Nanomaterials)
  • Article
  • Open Access
11 Citations
6,165 Views
12 Pages

Maleic Anhydride-Grafted Isotactic Polybutene-1 and Modified Polyamide 6

  • Yongxian Zhao,
  • Chen Ma,
  • Shijie Cheng,
  • Wei Xu and ,
  • Yuejuan Du,
  • Yansong Bao and
  • Zuojie Xiao
  • + 2 authors+ 0 author

5 August 2018

Maleic anhydride (MAH)–divinyl benzene (DVB) multi-monomer melt-grafting onto isotactic polybutene-1 (iPB-1) was carried out in a torque rheometer. The effects of dicumyl peroxide (DCP), MAH, and DVB concentrations, and temperature, on the reac...

  • Article
  • Open Access
932 Views
16 Pages

Thermal and Mechanical Properties of Cementitious Waste-Coated Polyamide 6 Composites

  • Ayfer Donmez Cavdar,
  • Husnu Yel,
  • Sevda Boran Torun,
  • Murat Ertas and
  • Salim Hiziroglu

9 August 2026

The study investigates pozzolanic materials, silica fume, and fly ash as reinforcement agents in a polyamide 6 (PA6) matrix with cement. The materials were combined in various proportions and applied via ultrasonic coating before being extruded into...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
5 Citations
4,345 Views
14 Pages

Photochromic Polyamide 6 Based on Spiropyran Synthesized via Hydrolyzed Ring-Opening Polymerization

  • Shiyou Tian,
  • Jicong Zhang,
  • Qiong Zhou,
  • Limei Shi and ,
  • Wenwen Wang and
  • Dong Wang
  • + 1 author+ 0 author

28 July 2021

We report photochromic polyamide 6 (PA6) which was synthesized by hydrolyzed ring-opening polymerization of ε-caprolactam with spiropyran (SP) embedded in the polymer chains. It indicated that crystallinity degree of the resulting copolymers was decr...

(This article belongs to the Special Issue Ring Opening Polymerization: A Synthetic Toolbox for New Monomers and Polymers with Tailor-Made Properties and Functions)
  • Article
  • Open Access
3 Citations
1,284 Views
16 Pages

Improved Thermo-Mechanical and Flame Resistance Behaviour of Polyamide 6/Lignin Microcomposites

  • Alessandro Sorze,
  • Roberto Miani,
  • Claudio Gioia,
  • Giulia Fredi and
  • Andrea Dorigato

This work focused on the investigation of sulfonated lignin as a novel and sustainable reinforcing filler for polyamide 6 (PA6) composites. Different formulations were thus prepared by melt compounding, varying the lignin content (5, 10, and 20 wt%)....

(This article belongs to the Special Issue Advances in Starch and Lignocellulosic-Based Materials)
  • Article
  • Open Access
7 Citations
3,473 Views
16 Pages

16 March 2023

Nowadays, technical practice puts emphasis on improving selected material properties of polymers which could lead to new applications. Material properties can be modified in numerous ways, among which is radiation treatment. This study looks into the...

(This article belongs to the Special Issue Application, Processing, and Testing of New Progressive Materials)
  • Article
  • Open Access
40 Citations
7,121 Views
13 Pages

Flame Inhibition and Charring Effect of Aromatic Polyimide and Aluminum Diethylphosphinate in Polyamide 6

  • Haisheng Feng,
  • Yong Qiu,
  • Lijun Qian,
  • Yajun Chen and ,
  • Bo Xu and
  • Fei Xin
  • + 1 author+ 0 author

5 January 2019

An aromatic macromolecular polyimide (API) was synthesized and characterized, and used as a synergistic charring flame retardant in glass fiber reinforced polyamide 6 (GF/PA6). API and aluminum diethylphosphinate (ADP) exhibited better flame inhibiti...

(This article belongs to the Collection Sustainable Polymeric Materials from Renewable Resources)
  • Article
  • Open Access
21 Citations
3,668 Views
13 Pages

Effects of Carbon Fiber Content on the Crystallization and Rheological Properties of Carbon Fiber-Reinforced Polyamide 6

  • Jianglin Liu,
  • Lang He,
  • Dongdong Yang,
  • Jianguo Liang and ,
  • Runtian Zhao,
  • Zhihui Wang,
  • Xiaodong Li and
  • Zhanchun Chen
  • + 3 authors+ 0 author

23 August 2024

Carbon fiber (CF)-reinforced polyamide 6 (PA6) composites have an excellent performance, attributed to properties such as light quality, high strength, and vibration reduction, and they are widely used in fields such as aerospace and transportation....

(This article belongs to the Section Polymer Fibers)
  • Article
  • Open Access
669 Views
15 Pages

Influence of Surface Modification of Fly Ashes on the Fire Behavior of Polyamide 6

  • Marcos Batistella,
  • Nour-Alhoda Masarra,
  • Constantinos Xenopoulos and
  • José-Marie Lopez-Cuesta

16 April 2026

This study investigates the influence of surface-modified fly ash particles on the fire behavior of polyamide 6 (PA6) composites containing two types of flame retardants: melamine polyphosphate (MPP) and aluminum diethyl phosphinate (AlPi). The objec...

(This article belongs to the Special Issue Flame-Retardant Polymer Composites, 3rd Edition)
  • Article
  • Open Access
12 Citations
5,157 Views
15 Pages

22 April 2019

Anionic polyamide-6 (APA-6) composites are prepared by the VARIM process using different modified ramie fabrics to study the structure and properties of different composites. This study can not only evaluate the optimal modification method for the ra...

(This article belongs to the Special Issue Renewable Polymers: Processing and Chemical Modifications)
  • Article
  • Open Access
13 Citations
4,148 Views
11 Pages

21 June 2021

Recycling is a current hot topic with a focus especially on plastics. The quality of such plastic recyclates is of utmost importance for further processing because impurities lead to a reduction thereof. Contaminations originating from other polymers...

(This article belongs to the Section Circular and Green Sustainable Polymer Science)
  • Article
  • Open Access
335 Views
21 Pages

24 September 2026

Controlling the balance between mechanical characteristics and sorption–diffusion properties remains one of the main challenges in the development of hydrogel materials. In this work, a method for obtaining composite copolymers of polyvinylpyrr...

(This article belongs to the Special Issue Polymer Hydrogels: Synthesis, Properties and Applications—2nd Edition)
  • Article
  • Open Access
23 Citations
2,721 Views
14 Pages

Effects of Noncontact Shoulder Tool Velocities on Friction Stir Joining of Polyamide 6 (PA6)

  • Raheem Al-Sabur,
  • Hassanein I. Khalaf,
  • Aleksandra Świerczyńska,
  • Grzegorz Rogalski and
  • Hesamoddin Aghajani Derazkola

14 June 2022

In this study, the effects of the traverse and rotational velocities of the noncontact shoulder tool on the heat generation and heated flux during the friction stir joining of high-density polyamide 6 (PA6) polymer were investigated. The computationa...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
7 Citations
5,343 Views
16 Pages

Recycling of Bulk Polyamide 6 by Dissolution-Precipitation in CaCl2-EtOH-H2O Mixtures

  • Ruben Goldhahn,
  • Ann-Joelle Minor,
  • Liisa Rihko-Struckmann,
  • Siew-Wan Ohl and ,
  • Patricia Pfeiffer,
  • Claus-Dieter Ohl and
  • Kai Sundmacher
  • + 2 authors+ 0 author

To address the problems of virgin plastic production from fossil resources and the growing amount of plastic waste, a rapid transition to a circular economy is being pursued. The separation of mixed plastics into pure fractions is of paramount import...

(This article belongs to the Special Issue Challenges and Opportunities in Plastic Waste Management)
  • Article
  • Open Access
15 Citations
4,848 Views
12 Pages

Preparation and Properties of a Novel Microcrystalline Cellulose-Filled Composites Based on Polyamide 6/High-Density Polyethylene

  • Shihua Xu,
  • Shunmin Yi,
  • Jun He,
  • Haigang Wang and ,
  • Yiqun Fang and
  • Qingwen Wang
  • + 1 author+ 0 author

16 July 2017

In the present study, lithium chloride (LiCl) was utilized as a modifier to reduce the melting point of polyamide 6 (PA6), and then 15 wt % microcrystalline cellulose (MCC) was compounded with low melting point PA6/high-density polyethylene (HDPE) by...

  • Communication
  • Open Access
22 Citations
4,154 Views
8 Pages

Adsorption of Reactive Red 120 Dye by Polyamide Nylon 6 Microplastics: Isotherm, Kinetic, and Thermodynamic Analysis

  • Desara Afmataj,
  • Olympia Kordera,
  • Angeliki Maragkaki,
  • Vasileios A. Tzanakakis and ,
  • Ioannis Pashalidis,
  • Dimitrios Kalderis and
  • Ioannis Anastopoulos
  • + 2 authors+ 0 author

15 March 2023

In this work, we investigated the effect of various adsorption parameters (solution pH, temperature, contact time, and the presence of phosphate and nitrate ions) on the adsorption of Reactive Red 120 (RR120) dye by Polyamide Nylon 6 (PN6) microplast...

(This article belongs to the Special Issue Microplastic Pollutants in Aquatic Ecosystems: Present and Future Challenges)
  • Article
  • Open Access
20 Citations
3,362 Views
17 Pages

Carbon Fiber-Reinforced Polyamide 6 Composites: Impact of Fiber Type and Concentration on the Mechanical Properties

  • Weiping Dong,
  • Zhaozhu Yu,
  • Xingxiang Sun,
  • Zhonglue Hu and ,
  • Shiju E,
  • Fangqiang Tong,
  • Sisi Wang and
  • Xiping Li
  • + 3 authors+ 0 author

22 March 2025

To investigate the influence of varying concentrations and types of carbon fiber (CF) on the mechanical properties of polyamide 6 (PA6) composites, this study explores the mechanical properties of PA6 composites with various CF types and quantities....

  • Article
  • Open Access
19 Citations
4,275 Views
15 Pages

11 October 2020

The novel organic aluminum hypophosphite (ALCPA) and its hybrid (CNALCPA) with graphitic carbon nitride (g-C3N4) were successfully synthesized and applied as halogen-free flame retardants in polyamide 6 (PA6). Their structures, morphology, thermal st...

(This article belongs to the Special Issue Functional Polymer Composites)
  • Article
  • Open Access
18 Citations
4,166 Views
14 Pages

Thermoplastic RTM: Impact Properties of Anionically Polymerised Polyamide 6 Composites for Structural Automotive Parts

  • James J. Murray,
  • Tom Allen,
  • Simon Bickerton,
  • Ankur Bajpai and ,
  • Klaus Gleich,
  • Edward D. McCarthy and
  • Conchúr M. Ó Brádaigh
  • + 2 authors+ 0 author

14 September 2021

This study investigates the impact behaviour and post-impact performance of polyamide-6 glass fibre reinforced composites, manufactured by thermoplastic resin transfer moulding. Impact test samples were extracted from quasi-isotropic laminates using...

(This article belongs to the Section D1: Advanced Energy Materials)
  • Article
  • Open Access
19 Citations
6,028 Views
19 Pages

Porous polyamide-6 membranes were fabricated via a non-solvent induced phase inversion method, and the influence of gelation time on the properties of the membranes was investigated. Membrane samples with various gelation times were prepared. The eva...

(This article belongs to the Special Issue State-of-the-Art Membrane Science and Technology in Poland 2021-2022)
  • Article
  • Open Access
9 Citations
4,081 Views
16 Pages

14 December 2021

Glass fibre reinforced polyamide 6 (GFPA6) thermoplastic composites (TPCs) are promising materials with excellent properties, but due to their low surface free energy they are usually difficult to wet, and therefore, possesses poor adhesion propertie...

  • Article
  • Open Access
28 Citations
6,728 Views
15 Pages

31 October 2016

Nanocomposites of layered silica nanoparticles (LSN) obtained by the sol–gel method, and commercial montmorillonite clay Cloisite®20A with polypropylene (PP) and Cloisite®30B with polyamide-6 (PA6) were prepared by melt blending in order to study the...

(This article belongs to the Special Issue Nanocomposites of Polymers and Inorganic Particles 2016)
  • Article
  • Open Access
32 Citations
7,193 Views
18 Pages

Novel Biobased Polyamide 410/Polyamide 6/CNT Nanocomposites

  • Itziar Otaegi,
  • Nora Aramburu,
  • Alejandro J. Müller and
  • Gonzalo Guerrica-Echevarría

4 September 2018

Biobased polyamide 410 (PA410)/multiwall carbon nanotube (CNT) nanocomposites (NCs) were obtained by melt-mixing in a twin screw extruder a Polyamide 6 (PA6)-based masterbatch (with 15 wt % CNT content) with neat PA410. Directly mixed PA410/CNT NCs w...

(This article belongs to the Special Issue Polymer-CNT Nanocomposites)

of 41