- Article
A Semi-Analytical Method for the S-Parameter Calculations of an N × M Multimode Interference Coupler
A semi-analytical method for the S-parameter calculations of an
A semi-analytical method for the S-parameter calculations of an
A microring resonator with the multimode interference coupler is fabricated on the polymer platform by using UV-based soft nanoimprint technique. A unique class of fluorinated polymer, perfluoropolyether (PFPE), is employed for the fabrication of the...
Optical communication systems based on silicon (Si) multimode interference (MMI) wavelength-division multiplexing (WDM) technology can suffer from back reflection. This undesirable characteristic causes losses and is a key problem that can lead to pe...
A photonic frequency shifter based on generalized Mach-Zehnder interferometer (GMZI) architecture is presented and experimentally validated. The circuit consists of four Mach-Zehnder modulators (MZM) in a 4 × 4 network bounded by two 4 ×...
We propose and demonstrate an integrated optical switch that leverages an optical phased array (OPA) and an on-chip metalens, highlighting its potential for efficient and scalable beam switching across multiple ports within a compact footprint. The d...
Photonic transmitters that operate with a high data transfer rate (over 150 Gb/s) at the O-band range (1260–1360 nm) require at least 100 milliwatts of power to overcome the power losses that are caused by using high-speed modulators. A laser w...
The demand on fast and high-bandwidth data transmission is in continuous increase. These demands are highly dependent on optical signal manipulation, including switching, modulation, and routing. We demonstrate a two-port silicon optical router based...
Subwavelength grating (SWG) metamaterials have garnered a great interest for their singular capability to shape the material properties and the propagation of light, allowing the realization of devices with unprecedented performance. However, practic...
A novel wavelength triplexer based on Channel-Shaped Multimode Interference (C-MMI) structures on the InP platform is proposed for multi-channel integration compatibility in a 50G passive optical network (PON) system. Performance analysis of the prop...
Planar MMI couplers based on inorganic material platforms have played an essential role in photonic integrated circuits development. Advances in organic polymer fabrication techniques enable the design of components beyond a single plane, thus facili...
The Talbot effect concerns the periodic self-imaging along an optical axis of a free-space optical field that is periodic in an initial transverse plane. It may be modeled by a shift-invariant linear system, fully characterized by the convolution of...
An ultra-compact 1310/1550 nm wavelength division (de)multiplexer based on a channel-shaped multimode interference structure was proposed and fabricated on an InP platform. The device has been simulated and optimized with a low insertion loss of 0.1...
In this work, we present the design and numerical validation of a reconfigurable electro-optic photonic integrated circuit architecture for dynamic 1 × 4 optical routing, based on electro-optic phase shifters and a chain of cascaded multimode i...
In this study, we demonstrate the influence of operating temperature variation and stress-induced effects on a silicon-on-insulator (SOI)-based multi-mode interference coupler (MMI). Here, SiGe is introduced as the cladding layer to analyze its effec...
We propose and demonstrate a high-performance asymmetrical multimode interference splitter on X-cut lithium niobate on insulator (LNOI) with an ultra-compact size of 5.8 μm × (26.4–35.6) μm. A rectangle with a small region is remove...
The key components of a polarization-independent electro-optic (EO) interferometer, including the beam splitter, mode converter, and directional coupler, are designed based on a lithium niobate (LN) platform on an integrated insulator to ensure high...
Silicon photonics has emerged as a critical enabling technology for a diverse range of applications, from high-speed data communication and computing to advanced sensing and quantum information processing. This paper provides a comprehensive review o...
Optical fibers were previously demonstrated to propagate and detect acoustic modes that were converted from Lamb waves for structural health-monitoring applications; typically, a fiber Bragg grating sensor in the optical fiber is used to detect acous...
The operation of a four-channel multiplexer, utilizing multimode interference (MMI) wavelength division multiplexing (WDM) technology, can be designed through the cascading of MMI couplers or by employing angled MMI couplers. However, conventional de...
An optical analog-to-digital converter (OADC) scheme with enhanced bit resolution by using a multimode interference (MMI) coupler as optical quantization is proposed. The mathematical simulation model was established to verify the feasibility and to...
Multimode interference (MMI) couplers based on silicon slot-waveguide structures have received widespread attention in recent years. The key issues that need to be addressed are the size and loss of such devices. This study introduces a 1 × 3 s...
An optical 90° hybrid based on an InGaAsP/InP deep-ridged 4 × 4 multimode interference (MMI) coupler is proposed and fabricated. Manufacturing tolerances on structural parameters of the 90° hybrid including multimode waveguide width and...
A thermally tunable 1 × 4 channel optical demultiplexer was designed using an ultra low-loss Si3N4 (propagation loss ~3.1 dB/m) waveguide. The demultiplexer has three 2 × 2 Mach-Zehnder interferometers (MZI), where each of the MZI contains two 2 × 2...
We report an optofluidic hybrid silicon-polymer planar ring resonator with integrated microfluidic channels for efficient liquid delivery. The device features a planar architecture of intersecting liquid-core waveguides and microfluidic channels. A l...
In this work, the performance of a Mach–Zehnder interferometer manufactured in silicon nitride with a liquid crystal cladding is studied. The device consists of two multi-mode interference couplers linked by two rectangular waveguides, the clad...
One of the most common techniques for increasing data bitrate using the telecommunication system is to use dense wavelength division multiplexing (DWDM). However, the implementation of DWDM with more channels requires additional waveguide coupler dev...
In this paper, a design for a 1 × 4 optical power splitter based on the multimode interference (MMI) coupler in a silicon (Si)–gallium nitride (GaN) slot waveguide structure is presented—to our knowledge, for the first time. Si and GaN were found as...
A high-sensitivity and high-stability on-chip temperature sensor based on a silicon-on-insulator (SOI) platform is proposed and experimentally demonstrated in this work. The device employs a ring-assisted asymmetric Mach–Zehnder interferometer...
The study of designing a compact transverse electric (TE)/transverse magnetic (TM) polarization multimode interference (MMI) combiner based on silicon slot-waveguide technology is proposed for solving the high demands for high-speed ability alongside...
In the past few decades, silicon photonics has witnessed a ramp-up of investment in both research and industry. As a basic building block, silicon waveguide crossing is inevitable for dense silicon photonic integrated circuits and efficient crossing...
Mode division multiplexing (MDM) is a promising technology for the capacity enlargement of the optical transmission network. As a key element in the MDM system, the mode converter plays an important role in signal processing. In this work, a wideband...
This paper presents a new design for a 1 × 4 optical power splitter using multimode interference (MMI) coupler in silicon nitride (Si3N4) strip waveguide structures. The main functionality of the proposed design is to use Si3N4 for dealing with...
A silica waveguide thermo-optic mode switch with small radius bimodal S-bends is demonstrated in this study. The cascaded multimode interference coupler is adopted to implement the E11 and E21 mode selective output. The beam propagation method is use...
We propose a method for generating the electromagnetically induced transparency (EIT) like-transmission by using microring resonator based on cascaded 3 × 3 multimode interference (MMI) structures. Based on the Fano resonance unit created from...
In this paper, we design and experimentally demonstrate an eight-channel cascaded Mach–Zehnder interferometer (MZI) based Local Area Network (LAN) Wavelength Division Multiplexing (WDM) (de)multiplexerwith channel spacing of 800 GHz on a silico...
Coherent optical communication serves as the backbone of long-haul, high-capacity optical networks, where polarization-insensitive 90° optical hybrids (OHs) are crucial for system simplification and robustness. This work presents a polarization-i...
We propose a novel 8-channel wavelength multimode interference (MMI) demultiplexer in slot waveguide structures that operate at 1530 nm, 1535 nm, 1540 nm, 1545 nm, 1550 nm, 1555 nm, 1560 nm, and 1565 nm. Gallium nitride (GaN) surrounded by silicon (S...
A fiber reshaping-based refractive index (RI) sensor is proposed relying on both optical intensity variation and wavelength shift. The objective of this study is to completely reshape the core and to ultimately mimic a coreless fiber, thereby creatin...
In previous works, inverse design methods have primarily focused on manipulating the optical power to achieve specific design targets. In this paper, we use the inverse design method to enable the precise engineering of the optical phase. As a proof...
Optical low-coherence interferometry (OLCI) takes advantage of the variation in refractive index in silicon-wire microring resonator (MRR) effective lengths to perform glucose biosensing using MRR interferograms. The MRR quality factor (Q), proportio...
Spectrally flat-topped and polarization-insensitive coarse wavelength division multiplexing (CWDM)-targeted optical demultiplexers based on distributed multimode-interference (MMI) phase compensations are analytically calculated and experimentally de...
This work reports the design of a 1x2 photonic digital switch controlled by an electrically induced metasurface, configurated by a rectangular array of points where the refractive index is locally changed through the application of an external bias....
High-performance optical isolators are key components in photonic integrated circuits, with significant applications in nonlinear optical systems. We propose a design for a TE-mode optical isolator based on the AlGaAs-on-insulator platform. The isola...
This work introduces a novel architecture for implementing a parallel coherent photonic digital-to-analog converter (PDAC), designed to transform parallel digital electrical signals into corresponding analog optical output, convertible to analog elec...
RF photonics has emerged as a key technology for the generation and processing of high-frequency RF signals required in 6G wireless communications, photonic radar, and high-resolution sensing systems. In particular, optical heterodyning-based RF sign...
Silicon nitride (SiN) is emerging as a material of choice for photonic integrated circuits (PICs) due to its ultralow optical losses, absence of two-photon absorption in telecommunication bands, strong Kerr nonlinearity and high-power handling capabi...
Many current 1 × 2 splitter couplers based on multimode interference (MMI) face difficulties such as significant back reflection and limited flexibility in waveguide segmentation at the output, which necessitate the addition of transitional str...