Skip to Content

4,767 Results Found

  • Article
  • Open Access
160 Views
21 Pages

31 October 2026

This study systematically investigates the dynamic behavior of laser-induced cavitation bubbles and the micro-forming mechanism between parallel walls. The bubble is produced in the middle of the gap. Through integrated high-speed imaging, hydrophone...

  • Article
  • Open Access
15 Citations
3,428 Views
18 Pages

1 November 2022

The primary purpose of this paper is to study the size effect of surface roughness and realize the quantitative description of the surface roughness in micro-forming process. This work is a continuation of the previous work by the authors. The effect...

(This article belongs to the Special Issue Mechanical, Corrosive and Tribological Degradation of Metal Coatings and Modified Metallic Surfaces)
  • Article
  • Open Access
11 Citations
4,576 Views
33 Pages

31 July 2018

A novel high strain rate microforming technique, laser impact liquid flexible embossing (LILFE), which uses laser induced shock waves as an energy source, and liquid as a force transmission medium, is proposed by this paper in order to emboss three-d...

(This article belongs to the Special Issue Metal Micro-forming)
  • Article
  • Open Access
6 Citations
3,344 Views
10 Pages

15 December 2021

Product miniaturisation and functional integration are currently global trends to save weight, space, materials and costs. This leads to an increasing demand for metallic micro components. Thus, the development of appropriate production technologies...

(This article belongs to the Special Issue Micro and Nano Manufacturing (WCMNM 2021))
  • Article
  • Open Access
615 Views
24 Pages

14 April 2026

In bridge widening projects under uninterrupted traffic conditions, vehicular vibration easily leads to damage in the interfacial transition zone (ITZ) and microstructural degradation of early-age concrete in wet joints. Taking a typical hollow slab-...

(This article belongs to the Special Issue Concrete in Structural Engineering: Fabrication and Mechanical Behavior (Third Edition))
  • Article
  • Open Access

18 November 2026

In recent years, copper-based conductive and thermal management components have required fine structures for miniaturization and enhanced functionality. Micro-forming is an excellent processing method characterized by high productivity and suitabilit...

(This article belongs to the Special Issue Tribology in Manufacturing Processes & Advanced Surface Engineering)
  • Article
  • Open Access
6 Citations
4,210 Views
14 Pages

31 October 2018

The demand for very small metal parts is growing rapidly due to the development of micromechanisms. In microtechnology, the dimensions of scale parts are below 1 + c mm, where c varies based on the process type. The “classic” processes us...

  • Article
  • Open Access
603 Views
12 Pages

Effect of Changes in Plastic Flow During Non-Steady State Deformation on Force Behavior in Micro-Extrusion of Pure Copper

  • Keisuke Sugiyama,
  • Masato Ito,
  • Kenichi Yaguchi,
  • Tatsuya Funazuka and
  • Tomomi Shiratori

30 March 2026

In recent years, copper-based conductive and heat dissipation components have required fine structures for miniaturization and enhanced functionality. Micro-forming is an excellent processing method characterized by high productivity and suitability...

(This article belongs to the Special Issue Next-Generation Alloys: Nanostructured Metals, Complex Steels, and Multi-Component Systems)
  • Article
  • Open Access
4 Citations
3,514 Views
18 Pages

Strain-Induced Surface Roughening of Thin Sheets and Its Effects on Metal Forming and Component Properties

  • Úlfar Arinbjarnar,
  • Rune Juul Christiansen,
  • Maximilian Knoll,
  • Karen Pantleon and ,
  • Morten Stendahl Jellesen and
  • Chris Valentin Nielsen
  • + 1 author+ 0 author

Straining of sheet metal leads to surface roughness changes. In this study, foils of AISI 201 and AISI 304 stainless steel were strained in uniaxial tension to impose roughening of their surfaces. Thereafter, the corrosion resistance, electrical resi...

  • Article
  • Open Access
6 Citations
2,037 Views
17 Pages

20 August 2024

In the field of ultrasonic-assisted micro-forming, in addition to acoustic softening, impact effects also play a significant role, especially in terms of influencing the deformation behavior of surfaces, such as by generating more deformation on surf...

(This article belongs to the Special Issue Ultrasound for Material Characterization and Processing (3rd Edition))
  • Article
  • Open Access
7 Citations
4,088 Views
21 Pages

14 January 2025

The metal bipolar plate is a critical component of the hydrogen fuel cell stack used in proton exchange membrane fuel cells. Bipolar plates must have high accuracy micro-channels with a high aspect ratio (AR) between the channel depth and the half pe...

(This article belongs to the Section D: Materials and Processing)
  • Feature Paper
  • Article
  • Open Access
17 Citations
6,847 Views
20 Pages

Understanding Size Effects and Forming Limits in the Micro-Stamping of Industrial Stainless Steel Foils

  • Matthias Weiss,
  • Peng Zhang,
  • Michael P. Pereira,
  • Bernard F. Rolfe and ,
  • Daniel E. Wilkosz and
  • Peter D. Hodgson
  • + 1 author+ 0 author

26 December 2020

This study investigates the effect of grain size and composition on the material properties and forming limits of commercially supplied stainless steel foil for bipolar plate manufacture via tensile, stretch forming and micro-stamping trials. It is s...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
9 Citations
2,797 Views
15 Pages

Grain Refinement of Pure Magnesium for Microforming Application

  • Siska Titik Dwiyati,
  • Gandjar Kiswanto and
  • Sugeng Supriadi

Magnesium is a suitable candidate material for temporary implant applications, such as a miniplate, due to its biocompatibility, density, and elastic modulus comparable to that of human bone. The biodegradability property of magnesium can minimize th...

  • Article
  • Open Access
22 Citations
7,155 Views
15 Pages

An Experimental Study on Micro Clinching of Metal Foils with Cutting by Laser Shock Forming

  • Xiao Wang,
  • Cong Li,
  • Youjuan Ma,
  • Zongbao Shen and ,
  • Xianqing Sun,
  • Chaofei Sha,
  • Shuai Gao,
  • Liyin Li and
  • Huixia Liu
  • + 4 authors+ 0 author

13 July 2016

This paper describes a novel technique for joining similar and dissimilar metal foils, namely micro clinching with cutting by laser shock forming. A series of experiments were conducted to study the deformation behavior of single layer material, duri...

(This article belongs to the Special Issue Ultrafast Laser-Based Manufacturing)
  • Article
  • Open Access
18 Citations
4,687 Views
14 Pages

17 December 2018

Thermoplastic microforming not only breaks through the bottleneck in the manufacture of metallic glasses, but also offers alluring prospects in microengineering applications. The microformability of metallic glasses decreases with a reduction in the...

(This article belongs to the Special Issue Micromanufacturing of Metallic Materials)
  • Article
  • Open Access
2 Citations
4,662 Views
11 Pages

15 April 2019

For this study, a novel resistance heating system for microforming was developed using surfaces of forming dies as heating resources. The electrical resistance of the die surfaces was designed and the hard-coating material AlCrSiN was selected to coa...

(This article belongs to the Special Issue Metal Micro-forming)
  • Article
  • Open Access
1 Citations
2,347 Views
22 Pages

1 October 2025

In the manufacturing of micro-scale components, geometric dimensional accuracy and product quality are critical factors that directly influence both production costs and efficiency. To meet the growing demands in this field, micro-extrusion technolog...

(This article belongs to the Topic Surface Engineering and Micro Additive Manufacturing)
  • Article
  • Open Access
693 Views
17 Pages

An Ultrasonic Micro-Tool Assisted Platform for Post-Processing of Micrometer-Scale Copper Wires

  • Xu Wang,
  • Zhiwei Xu,
  • Chengjia Zhu,
  • Tian Zhang and ,
  • Qiang Tang,
  • Junchao Zhang and
  • Yinlong Zhu
  • + 2 authors+ 0 author

27 March 2026

Acoustic microactuation technology has emerged as an effective approach for fabrication of micro- and nanoscale objects, enabling precise processing and shaping control of microscale materials by efficiently transmitting ultrasonic vibration energy a...

(This article belongs to the Special Issue Research Progress of Ultra-Precision Micro-Nano Machining, Second Edition)
  • Article
  • Open Access
1 Citations
2,112 Views
10 Pages

15 November 2020

The plastic treatment of products reduced to sizes corresponding to the microscale poses difficulties, due to the occurrence of the so-called size effect, which is responsible for the different behavior of the material during the realization of micro...

  • Review
  • Open Access
22 Citations
8,800 Views
29 Pages

Tool Wear and Life Span Variations in Cold Forming Operations and Their Implications in Microforming

  • Anders E. W. Jarfors,
  • Sylvie J. Castagne,
  • Atsushi Danno and
  • Xinping Zhang

The current paper aims to review tooling life span, failure modes and models in cold microforming processes. As there is nearly no information available on tool-life for microforming the starting point was conventional cold forming. In cold forming c...

(This article belongs to the Special Issue Advanced Manufacturing Technologies for Novel Microstructures and Components Shapes)
  • Article
  • Open Access
30 Citations
4,662 Views
18 Pages

In Situ Micro-Observation of Surface Roughness and Fracture Mechanism in Metal Microforming of Thin Copper Sheets with Newly Developed Compact Testing Apparatus

  • Mandeep Singh,
  • Shubham Sharma,
  • Appusamy Muniappan,
  • Danil Yurievich Pimenov and ,
  • Szymon Wojciechowski,
  • Kanishka Jha,
  • Shashi Prakash Dwivedi,
  • Changhe Li,
  • Jolanta B. Królczyk and
  • Tien V. T. Nguyen
  • + 6 authors+ 1 author

12 February 2022

A better understanding of material deformation behaviours with changes in size is crucial to the design and operation of metal microforming processes. In order to facilitate the investigation of size effects, material deformation behaviours needed to...

(This article belongs to the Special Issue Mechanical Properties of Technical Materials)
  • Article
  • Open Access
3 Citations
8,093 Views
14 Pages

Analysis of Deep Drawing Process for Stainless Steel Micro-Channel Array

  • Tsung-Chia Chen,
  • Jiang-Cheng Lin and
  • Rong-Mao Lee

18 April 2017

The stainless steel bipolar plate has received much attention due to the cost of graphite bipolar plates. Since the micro-channel of bipolar plates plays the role of fuel flow field, electric connector and fuel sealing, an investigation of the deep d...

(This article belongs to the Special Issue Selected Material Related Papers from ICI2016)
  • Article
  • Open Access
23 Citations
7,407 Views
17 Pages

22 August 2019

To investigate the underlying mechanism of the effects of surface texturing on lubricated sliding friction in the metal forming operation, an in-situ observation system using transparent silica glass dies and a high speed recording camera was newly d...

(This article belongs to the Special Issue Metal Micro-forming)
  • Article
  • Open Access
1 Citations
2,558 Views
20 Pages

This work is concerned with forming, specifically deep drawing, and its influence on the micro-mechanical properties of sheet metal. In practice, there are several applications in which fractions can occur due to weak spots in the deep-drawn sheet me...

(This article belongs to the Special Issue Tribology in Manufacturing Engineering)
  • Article
  • Open Access
3 Citations
3,913 Views
13 Pages

24 April 2019

Ultrasonic orbital microforming—UOM—uses the broadly understood idea of orbital forging but uses very different laws of physics. The only shaping force in this process is the inertia force resulting from the acceleration in the rotary mot...

(This article belongs to the Special Issue Metal Micro-forming)
  • Article
  • Open Access
4 Citations
3,497 Views
18 Pages

17 November 2023

The present work introduces a laser-induced cavitation bubble technique for forming an axisymmetric structure (i.e., microgroove) and the dynamics of a cavitation bubble from initial expansion to the collapse stages that were also simulated. Furtherm...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
1,414 Views
16 Pages

11 February 2026

This study explores the feasibility of using polyurethane (PU) elastomer as a flexible punch-filling medium in cold forming. Microforming processes encounter challenges such as size effects and friction effects, which can lead to defects including fr...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
20 Citations
4,242 Views
17 Pages

Study on Forming Mechanism of the Recast Layer on the Workpiece Surface during Micro EDM

  • Chunmei Wang,
  • Hao Wang,
  • Xuyang Chu,
  • Yunxiang Lu and
  • Haifeng He

26 February 2024

In comparison to conventional EDM, micro EDM distinguishes itself through its brief discharge duration, narrow discharge channel radius, and concentrated energy density. However, there remains a paucity of comprehensive research on the surface format...

(This article belongs to the Section Metals and Alloys)
  • Review
  • Open Access
37 Citations
12,681 Views
26 Pages

10 May 2019

Metallic tubular micro-components play an important role in a broad range of products, from industrial microsystem technology, such as medical engineering, electronics and optoelectronics, to sensor technology or microfluidics. The demand for such co...

(This article belongs to the Special Issue Metal Micro-forming)
  • Article
  • Open Access
690 Views
16 Pages

The friction size effect in thin-sheet microforming constrains the attainable forming quality of microscale sheet components. In this study, T2 copper foils with thicknesses of 0.04, 0.08, 0.16, and 0.32 mm were investigated by comparative tensile te...

  • Article
  • Open Access
11 Citations
6,926 Views
14 Pages

4 November 2015

Micro-forming with ultrafine-grained (UFG) materials is a promising direction for the fabrication of micro-electro-mechanical systems (MEMS) components due to the improved formability, good surface quality, and excellent mechanical properties it prov...

(This article belongs to the Section Advanced Materials Characterization)
  • Feature Paper
  • Article
  • Open Access
5 Citations
3,673 Views
12 Pages

Microforming a Miniature Cup-Shaped Internal Gear Using a Cold Lateral Extrusion Process

  • Cho-Pei Jiang,
  • Po-Shen Chen,
  • Yaroslav Erisov and
  • Chang-Cheng Chen

11 May 2022

This study determines the micro forming of copper alloy to form a cup-shaped internal gear. The as received material, copper alloy C1100, is annealed to obtain the initial grains and to determine the effect of the initial grain size on the mechanical...

(This article belongs to the Special Issue Innovative Mechanical Processing Technology of Metals)
  • Technical Note
  • Open Access
25 Citations
4,791 Views
14 Pages

Experimental Investigation on Form Error for Slow Tool Servo Diamond Turning of Micro Lens Arrays on the Roller Mold

  • Yutao Liu,
  • Zheng Qiao,
  • Da Qu,
  • Yangong Wu and ,
  • Jiadai Xue,
  • Duo Li and
  • Bo Wang
  • + 2 authors+ 0 author

25 September 2018

Slow tool servo (STS) assisted ultra-precision diamond turning is considered as a promising machining process with high accuracy and low cost to generate the large-area micro lens arrays (MLAs) on the roller mold. However, the chatter mark is obvious...

(This article belongs to the Special Issue Micromanufacturing of Metallic Materials)
  • Article
  • Open Access
291 Views
15 Pages

Controlling Micro/Nano Morphology and Water Solubility of Dipotassium Pyrroloquinoline Quinone via Crystal Form Modification

  • Jinjian Wei,
  • Jiahui Kong,
  • Wenxiu An,
  • Chengfa Cai and ,
  • Ronghua Zhang,
  • Qian Chen,
  • Xu Han,
  • Yi Wen and
  • Zhide Zhang
  • + 4 authors+ 0 author

5 October 2026

The dipotassium salt of pyrroloquinoline quinone (PQQK2) is a promising nutraceutical with superior stability compared to its free acid, yet the influence of its solid-state form on solubility and particle morphology has not been explored. In this st...

(This article belongs to the Section Industrial Crystallization)
  • Review
  • Open Access
132 Citations
13,284 Views
36 Pages

A Review on Micro- to Nanocellulose Biopolymer Scaffold Forming for Tissue Engineering Applications

  • H. P. S. Abdul Khalil,
  • Fauziah Jummaat,
  • Esam Bashir Yahya,
  • N. G. Olaiya and ,
  • A. S. Adnan,
  • Munifah Abdat,
  • Nasir N. A. M.,
  • Ahmad Sukari Halim,
  • U. Seeta Uthaya Kumar and
  • A. B. Suriani
  • + 6 authors+ 1 author

8 September 2020

Biopolymers have been used as a replacement material for synthetic polymers in scaffold forming due to its biocompatibility and nontoxic properties. Production of scaffold for tissue repair is a major part of tissue engineering. Tissue engineering te...

(This article belongs to the Special Issue Advances in Polymer Nanofibers)
  • Article
  • Open Access
8 Citations
7,270 Views
14 Pages

Comparison between Laser and Stamping without Die (SWD) for Micro Tapered Hole Forming

  • Yung-Chou Hung,
  • Yuan-Jen Chang,
  • Chia-Lung Kuo,
  • Jin-Chen Hsu and
  • Chao-Ching Ho

15 March 2016

The forming of a micro tapered hole is based on nanosecond pulsed laser processing, which conforms to fast processing time and high throughput; however, the microhole quality should be improved. Micro stamping is a technology providing high precise s...

  • Article
  • Open Access
4 Citations
2,876 Views
15 Pages

Deformation Behavior and Microstructural Evolution of T-Shape Upsetting Test in Ultrafine-Grained Pure Copper

  • Hongpeng Jiang,
  • Guangqiang Yan,
  • Jianwei Li,
  • Jie Xu and ,
  • Debin Shan and
  • Bin Guo
  • + 1 author+ 0 author

27 August 2021

Ultrafine-grained (UFG) materials can effectively solve the problem of size effects and improve the mechanical properties due to its ultra-high strength. This paper is dedicated to analyzing the deformation behavior and microstructural evolution of U...

(This article belongs to the Special Issue Recent Achievements and Developments in Micro/Nano-Forming: Theory, Technology and Applications)
  • Article
  • Open Access
2 Citations
1,739 Views
17 Pages

19 January 2026

This paper addresses critical issues related to the structural design of a micro-factory housing a mobile 3D printing system for plastic recycling. Rather than a simple comparison, it quantifies the “modification penalty”, the structural...

(This article belongs to the Special Issue Sustainable Construction: Innovations in Design, Engineering, and the Circular Economy)
  • Article
  • Open Access
8 Citations
2,914 Views
12 Pages

Picosecond Laser Shock Micro-Forming of Stainless Steel: Influence of High-Repetition Pulses on Thermal Effects

  • José Manuel López,
  • David Munoz-Martin,
  • Juan José Moreno-Labella,
  • Miguel Panizo-Laiz and ,
  • Gilberto Gomez-Rosas,
  • Carlos Molpeceres and
  • Miguel Morales
  • + 2 authors+ 0 author

15 June 2022

A study of the peen forming of thin stainless steel metal foils (50 μm thick) using a solid-state ps-pulsed laser, emitting at a wavelength of 1064 nm was conducted. The pitch distance between consecutive laser pulses was kept constant by tun...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
9 Citations
2,722 Views
11 Pages

Effect of Strain Rate on the Mechanical Properties of Cu/Ni Clad Foils

  • Haiyang Wang,
  • Chuanjie Wang,
  • Linfu Zhang,
  • Gang Chen and ,
  • Qiang Zhu and
  • Peng Zhang
  • + 1 author+ 0 author

12 November 2021

The performance of clad foils in microforming deserves to be studied extensively, where the strain rate sensitivity of the clad foil concerning the forming performance is a crucial factor. In this paper, the strain rate sensitivity of the mechanical...

(This article belongs to the Special Issue Recent Achievements and Developments in Micro/Nano-Forming: Theory, Technology and Applications)
  • Article
  • Open Access
9 Citations
2,976 Views
14 Pages

Effect of Holding Time on the Extrusion Force and Microstructure Evolution during the Plastic Forming of Ti-6Al-4V Micro-Gears

  • Xiangzhong Yan,
  • Shengwei Zhang,
  • Kunlan Huang,
  • Yi Yang and ,
  • Wei Wang and
  • Mingxia Wu
  • + 1 author+ 0 author

17 February 2022

The application of titanium alloy micro-gears in microelectromechanical systems has been severely restricted, as the graphite mold is prone to abrasion or even to crack at high temperatures, mainly due to the forming load. We aimed to manufacture Ti-...

(This article belongs to the Special Issue Recent Achievements and Developments in Micro/Nano-Forming: Theory, Technology and Applications)
  • Article
  • Open Access
22 Citations
6,700 Views
10 Pages

Single point incremental forming is used for rapid prototyping of sheet metal parts. This forming technology was applied to the fabrication of thin shell micropyramids of aluminum, stainless steel, and titanium foils. A single point tool used had a t...

(This article belongs to the Special Issue Micro/Nano Manufacturing)
  • Article
  • Open Access
11 Citations
3,894 Views
14 Pages

23 March 2022

In this paper, nano/microfibrils were applied to enhance the mechanical and hydrophobic properties of the sugarcane bagasse fiber films. The successful preparation of nano/microfibrils was confirmed by scanning electron microscope (SEM), X-ray diffra...

(This article belongs to the Special Issue Cellulose and Its Derivatives: Applications, and Future Perspectives)
  • Article
  • Open Access
2 Citations
2,129 Views
12 Pages

Short-Term Material Characterization by Electrohydraulic Incremental Extrusion through Micro Channels

  • Lasse Langstädtler,
  • Sebastian Schnabel,
  • Marius Herrmann,
  • Christian Schenck and
  • Bernd Kuhfuss

22 January 2021

Conventional testing procedures for characterizing the mechanical behavior of materials require intense preparation in geometry and in the handling of the samples to apply specific stress conditions. Furthermore, these procedures are time consuming....

  • Article
  • Open Access
16 Citations
5,170 Views
20 Pages

Feature Size Effect on Formability of Multilayer Metal Composite Sheets under Microscale Laser Flexible Forming

  • Huixia Liu,
  • Wenhao Zhang,
  • Jenn-Terng Gau,
  • Zongbao Shen and ,
  • Youjuan Ma,
  • Guoce Zhang and
  • Xiao Wang
  • + 2 authors+ 0 author

18 July 2017

Multilayer metal composite sheets possess superior properties to monolithic metal sheets, and formability is different from monolithic metal sheets. In this research, the feature size effect on formability of multilayer metal composite sheets under m...

  • Article
  • Open Access
3 Citations
3,048 Views
11 Pages

The Concordance of Alveolar Bone Deficiency with Severity of Lip Deformity in Microform Cleft Lip

  • Taehee Jo,
  • Kyehoon Choi,
  • Jaehoon Choi,
  • Junhyung Kim and ,
  • Kihwan Han and
  • Woonhyeok Jeong
  • + 1 author+ 0 author

21 December 2022

Background: We assessed the anthropometric measurements of bone defects in microform cleft lip. Methods: The external phenotypes of the nose and upper lip, and alveolar bone defects in microform cleft lip were measured anthropometrically using multim...

(This article belongs to the Section Plastic, Reconstructive and Aesthetic Surgery/Aesthetic Medicine)
  • Article
  • Open Access
4 Citations
4,142 Views
10 Pages

17 April 2019

In sheet microforming processes, in-surface principal strain rates may be compressive such that the thickness of the sheet increases in the process of deformation. In general, the evolution of free surface roughness depends on the sense of the princi...

(This article belongs to the Special Issue Metal Micro-forming)
  • Article
  • Open Access
22 Citations
4,293 Views
15 Pages

Research on the Micro-Extrusion Process of Copper T2 with Different Ultrasonic Vibration Modes

  • Linhong Xu,
  • Yulan Lei,
  • Haiou Zhang,
  • Zhaochen Zhang and ,
  • Yuchu Sheng and
  • Guangchao Han
  • + 1 author+ 0 author

10 November 2019

As an effective method for the fabrication of miniature metallic parts, the development of micro-forming process (MFP) is still restricted by the existence of size effect. To improve the micro-forming performance of metal material, ultrasonic vibrati...

  • Review
  • Open Access
51 Citations
18,838 Views
35 Pages

Electropolishing and Shaping of Micro-Scale Metallic Features

  • Sana Zaki,
  • Nan Zhang and
  • Michael D. Gilchrist

18 March 2022

Electropolishing (EP) is most widely used as a metal finishing process. It is a non-contact electrochemical process that can clean, passivate, deburr, brighten, and improve the biocompatibility of surfaces. However, there is clear potential for it to...

(This article belongs to the Section D3: 3D Printing and Additive Manufacturing)

of 96