- Article
For the problem of overhead line broken strand identification, a VMD−SSA−SVM-based overhead transmission line broken strand identification method is proposed. First, the vibration acceleration response signal of overhead transmission line...
For the problem of overhead line broken strand identification, a VMD−SSA−SVM-based overhead transmission line broken strand identification method is proposed. First, the vibration acceleration response signal of overhead transmission line...
This paper deals with the Differential Evolution (DE) based method for identification of the heat equation parameters applied for the estimation of a bare overhead conductor`s temperature. The parameters are determined in the optimization process usi...
This study concerns the identification and interpretation of current and voltage signals during complex non-simultaneous disturbances in high-voltage overhead lines. It includes topics related to both the search for the optimal model of the system du...
This paper investigates system identification algorithms for modal identification of frame structures, such as a suspension bridge and an overhead transmission line-crossing frame, using ambient vibration measurements. The modal identification proced...
The heterogeneous and interoperable nature of the cyber-physical system (CPS) has enabled the smart grid (SG) to operate near the stability limits with an inconsiderable accuracy margin. This has imposed the need for more intelligent, predictive, fas...
Payload weight detection plays an important role in condition monitoring and automation of cranes. Crane cells and scales are commonly used in industrial practice; however, when their installation to the hoisting equipment is not possible or costly,...
This paper proposes a multi-gene genetic programming (MGGP) approach to identifying the dynamic prediction model for an overhead crane. The proposed method does not rely on expert knowledge of the system and therefore does not require a compromise be...
Aiming at the core pain point that in existing object detection models, it is difficult to balance detection accuracy and real-time inference efficiency on edge computing devices in UAV-based intelligent inspection of power transmission lines, this p...
Most transmission system operators (TSOs) use seasonally static models considering extreme weather conditions, serving as a reference for computing the transmission capacity of power lines. The use of dynamic line rating (DLR) models can avoid the co...
Automatically and accurately reconstructing the overhead wires of railway from airborne laser scanning (ALS) data are an efficient way of railway monitoring to ensure stable and safety transportation services. However, due to the complex structure of...
With the rapid growth in wireless communication and IoT technologies, Radio Frequency Identification (RFID) is applied to the Internet of Vehicles (IoV) to ensure the security of private data and the accuracy of identification and tracking. However,...
Radio Frequency Identification (RFID) technology is widely applied in various scenarios, including logistics tracking, supply chain management, and target monitoring. In these contexts, the malicious cloning of legitimate tag information can lead to...
The automatic identification system (AIS) is an essential tool for modern ships, enabling the broadcast of identification and location information. However, the current AIS standard lacks security features, meaning that messages exchanged via AISs ar...
Railway overhead line systems play a critical role in national railway infrastructure. However, climate change driven by anthropogenic activities has increasingly affected the construction and operation of such systems. Railway overhead lines must th...
When overhead lines are impacted by lightning, the traveling wave of the fault contains a wealth of fault information. The accurate extraction of feature quantities from transient components and their classification are fundamental to the identificat...
Insulated overhead conductor (IOC) faults cannot be detected by the ordinary protection devices due to the existence of the insulation layer. The failure of insulated overhead conductors is regularly accompanied by partial discharge (PD); thus, IOC f...
Federated Learning (FL) is a machine learning technique that preserves data privacy and security by training models directly on decentralized edge network devices. This generates substantial communication overhead due to the repeated exchange of mode...
Persistent and infrequent (PI) flows refer to packet flows that last for a long time at low packet arrival rates in network traffic. It is crucial to accurately find these flows for uncovering stealthy network threats, such as advanced persistent thr...
The swarm attestation methods have been proposed to detect illegitimate modifications in a large network efficiently. However, they do not provide the scalable identification of detected devices, which is critical to keep a swarm network trustworthy...
Conventional GPS acquisition methods, such as Max selection and threshold crossing (MAX/TC), estimate GPS code/Doppler by its correlation peak. Different from MAX/TC, a multi-layer binarized convolution neural network (BCNN) is proposed to recognize...
Battery-Free Sensor Nodes (BFSNs) used in Simultaneous Wireless Information and Power Transfer (SWIPT) systems often rely on lightweight communication protocols with minimal security overhead due to strict energy constraints. As a result, conventiona...
With the maturity of Unmanned Aerial Vehicle (UAV) technology and the development of Industrial Internet of Things, drones have become an indispensable part of intelligent transportation systems. Due to the absence of an effective identification sche...
The paper is devoted to the digital transformation of the core engineering maintenance processes involved in medium-voltage overhead distribution network infrastructure inspection. The study presents an analysis of digital twin utilization for inspec...
Internet of Things (IoT) devices connected to the Internet are exploding, which poses a significant threat for their management and security protection. IoT device identification is a prerequisite for discovering, monitoring, and protecting these dev...
Power distribution networks are vulnerable to different faults, which compromise the grid performance and need to be managed effectively. Automatic and accurate fault detection and location are key components of effective fault management. This paper...
Drones have become a crucial research tool across marine environments over the past decade, being specifically useful in marine mammal research. Fin whales (Balaenoptera physalus) have been monitored feeding along the Catalan coast, Spain (NW Mediter...
With the development of smart grids and home energy management systems, accurate load identification has become an important part of improving energy efficiency and ensuring electrical safety. However, traditional load identification methods struggle...
Crossarms are widely used in power distribution and telecommunication sectors to support overhead cables. These structures are horizontally attached to the top of vertically erected utility poles and are essential elements in connecting overhead cabl...
Southern highbush blueberries (SHB; Vaccinium corymbosum interspecific hybrid) are a low chill species of blueberry that are commercially grown in sub-tropical climates. Due to the nature of SHB, the flowering and fruit set occur in mid-winter to ear...
Radio frequency fingerprint (RFF) identification represents a promising technique for lightweight device authentication. However, current research on RFF primarily focuses on the close-set recognition assumption. Moreover, the high computational comp...
Introduction: In recent years, several hospitals have incorporated MRI equipment managed directly by their cardiology departments. The aim of our work is to determine the total cost per test of both CT and MRI in the setting of a Cardiology Departmen...
Microservice architecture consists of a collection of loosely coupled, self-contained services that can be deployed independently. Given the limited capacity of the resources for a large number of services, the deployment of the services does not sca...
Classification of video traffic is crucial for network management, enforcing quality of service, and optimising bandwidth. Feature selection plays a vital role in traffic identification by reducing data volume, enhancing accuracy, and reducing comput...
The accurate identification of look-alike medical vials is essential for patient safety, particularly when similar vials contain different substances, volumes, or concentrations. Traditional methods, such as manual selection or barcode-based identifi...
Nowadays, user identification plays a more and more important role for authorized machine access and remote personal data usage. For reasons of privacy and convenience, biometrics-based user identification, such as iris, fingerprint, and face ID, has...
Deduplication of encrypted data is a significant function for both the privacy of stored data and efficient storage management. Several deduplication techniques have been designed to provide improved security or efficiency. In this study, we focus on...
Distributed databases are increasingly used in enterprise and cloud environments, but their distributed architecture introduces significant security challenges, including data leaks and insider threats. In the context of escalating cyber threats targ...
There are contexts where TCP/IP is not suitable for performing data transmission due to long delays, timeouts, network partitioning, and interruptions. In these scenarios, mobile opportunistic networks (MONs) are a valid option, providing asynchronou...
Despite encryption, the packet size is still visible, enabling observers to infer private information in the Internet of Things (IoT) environment (e.g., IoT device identification). Packet padding obfuscates packet-length characteristics with a high d...
The continuous static contraction of the upper limb during overhead work often leads to progressive muscle fatigue, which is the main cause of work-related musculoskeletal disorders (WMSDs) and reduced operational safety. Traditional fatigue detectio...
The identification of a new generation of adaptive strategies for deep brain stimulation (DBS) will require the development of mixed hardware–software systems for testing and implementing such controllers clinically. Towards this aim, introducing an...
This work demonstrates a formal connection between density estimation with a data-rate constraint and the joint objective of fixed-rate universal lossy source coding and model identification introduced by Raginsky in 2008 (IEEE TIT, 2008, 54, 3059&nd...
The paper analyzes the utilization of cable screen currents for earth fault identification and location. Attention is paid on cable and mixed feeders—cable and overhead lines. The principle of operation is based on utilization of 3 criterion va...
Accurate tool wear identification is essential for ensuring the continuity of intelligent machining and workpiece quality. To address the challenges of multi-source fusion inefficiency and inadequate feature extraction, this study proposes a novel id...
With the development of IoT, IoT devices have proliferated. With the increasing demands of network management and security evaluation, automatic identification of IoT devices becomes necessary. However, existing works require a lot of manual effort a...
Overhead power transmission line icing (PTLI) disasters are one of the most severe dangers to power grid safety. Automatic iced transmission line identification is critical in various fields. However, existing methods primarily focus on the linear ch...
In an IoT (Internet of Things) system where each IoT device has one/many RFID tags, there might be many RFID tags. However, when multiple tags respond to the reader’s interrogation at the same time, their signals collide. Due to the collision,...
The identification and localization of a fault are a basic requirement for optimal operation of a modern power system. An effective fault identification method significantly reduces outage time, improves the electrical supply reliability, and enhance...
19 September 2022
Many healthcare facilities use code-based alert systems to notify staff of ongoing emergencies via public announcement systems. This study sought to assess the ability of clinical and non-clinical employees across the State of Georgia to correctly id...
The vortex throw, similar to the javelin throw, requires exceptional mastery of technique and specific motor abilities to ensure success. This study examines the anthropometric and motoric status of young female track-and-field athletes and investiga...
of 5