Skip to Content

63 Results Found

  • Article
  • Open Access
7 Citations
2,725 Views
17 Pages

Analysis and Chromium Recovery from Ferrochrome Waste (Stockpiled Refined Ferrochrome Slags)

  • Otegen Sariyev,
  • Lyazat Tolymbekova,
  • Murat Dossekenov,
  • Bauyrzhan Kelamanov and ,
  • Dauren Yessengaliyev,
  • Assel Davletova and
  • Assylbek Abdirashit
  • + 2 authors+ 0 author

30 June 2025

This study investigates the effectiveness of various beneficiation methods for recovering chromium from refined ferrochrome slag. Dry magnetic separation at different field intensities (0.45 T and 0.8 T) showed that selective extraction of metallic c...

  • Review
  • Open Access
6 Citations
3,822 Views
17 Pages

Ferrochrome Pollution and Its Consequences on Groundwater Ecosystems and Public Health

  • Biswajit Patra,
  • Mihir Tanay Das,
  • Surya Narayan Pradhan,
  • Soumya Ranjan Dash and ,
  • Prajna Paramita Bhuyan and
  • Biswajita Pradhan
  • + 1 author+ 0 author

Ferrochrome pollution, a by-product of the ferroalloy industry, is emerging as a significant environmental concern due to its potential to contaminate groundwater resources. This contamination occurs primarily through the leaching of heavy metals, su...

  • Article
  • Open Access
21 Citations
5,333 Views
16 Pages

26 December 2022

In this study, high-carbon ferrochrome slag powder produced by grinding was used to replace different proportions of cement, and the effect of the amount of ferrochrome slag powder on the physical and mechanical properties of ferrochrome-slag-cement...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
5 Citations
3,493 Views
18 Pages

Value Extraction from Ferrochrome Slag: A Thermochemical Equilibrium Calculation and Experimental Approach

  • Nilamadhaba Sahu,
  • Gajanan U. Kapure,
  • Pankaj Kumar,
  • Sunil Kumar Tripathy and ,
  • Arijit Biswas,
  • Navneet Singh Randhawa and
  • Manas Paliwal
  • + 2 authors+ 0 author

29 October 2024

The valorization of slag from the production of high-carbon ferrochrome is a challenge for ferrochrome producers. The recycling of high-carbon ferrochrome slag was explored through the smelting route to recover Fe–Si–Al–Cr alloys an...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
13 Citations
9,376 Views
17 Pages

19 January 2018

A solid reduction process is described whereby chromite is reduced with the help of calcium chloride to produce ferrochrome alloy powders with high metal recovery. The process involves segregation reduction of chromite using graphite as the reductant...

  • Article
  • Open Access
6 Citations
6,892 Views
16 Pages

27 December 2022

Processing resource requirements in mineral extractive industries tend to increase over time as ore grades decrease, which consequently increases the environmental footprint of operations and products. This phenomenon may be alleviated by cleaner pro...

(This article belongs to the Special Issue Recent Developments in Mineral Processing at University of Cape Town)
  • Article
  • Open Access
566 Views
13 Pages

Development and Optimization of Ferrochrome Production Using Pre-Reduced Chromite Pellets

  • Yerbolat Makhambetov,
  • Ainash Akmanova,
  • Armat Zhakan,
  • Aibar Myrzagaliyev and ,
  • Dastan Aubakirov,
  • Zhadiger Sadyk and
  • Zhalgas Saulebek
  • + 2 authors+ 0 author

25 May 2026

This study investigates the production of high-carbon ferrochrome (HCFeCr) using pre-reduced chromite pellets. Chromite ore from the Kempirsai deposit, semicoke as a reducing agent, and activated bentonite as a binder were used for pellet preparation...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
13 Citations
2,778 Views
9 Pages

Microstructure and Wear Behavior of Laser Cladded Ni45 + High-Carbon Ferrochrome Composite Coatings

  • Jiayang Gu,
  • Ruifeng Li,
  • Shungao Chen,
  • Yuhao Zhang and ,
  • Shujin Chen and
  • Heng Gu
  • + 1 author+ 0 author

1 April 2020

A composite coating with enhanced mechanical properties including high hardness and excellent wear resistance was produced by laser cladding of mixed Ni45 and high-carbon ferrochrome powders on an ASTM 1045 steel substrate. Different quantities, rang...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
1 Citations
899 Views
18 Pages

A Numerical Simulation on the Melting Behavior of Ferrochrome Alloy in Molten Steel

  • Yuanhao Hai,
  • Mengke Liu,
  • Guojun Ma,
  • Xiang Zhang and
  • Dingli Zheng

28 January 2026

Ferrochrome alloy is a crucial additive in steelmaking, significantly enhancing the strength, hardness, and corrosion resistance of steel; investigating the melting behavior of ferrochrome alloy could provide a theoretical foundation for producing st...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
4 Citations
2,285 Views
21 Pages

31 May 2024

Reactive powder concrete (RPC) is a new generation concrete with high strength, used in special structures, and its use is increasing day by day. In this study, instead of using high-strength aggregates typically used in RPC, wastes released in ferro...

(This article belongs to the Section Waste and Recycling)
  • Article
  • Open Access
402 Views
19 Pages

Aluminosilicochrome Produced from Technogenic Wastes as an Alternative to Conventional Ferrosilicochrome in Refined Ferrochrome Smelting

  • Aristotel Issagulov,
  • Aibar Myrzagaliyev,
  • Saule Sagintayeva,
  • Yerbolat Makhambetov and ,
  • Diana Issagulova and
  • Kuanysh Ilyassov
  • + 1 author+ 0 author

14 August 2026

This study investigates the possibility of using aluminosilicochrome (ASC) produced from technogenic raw materials as a potential alternative to FSC-48 ferrosilicochrome in refined ferrochrome smelting. Laboratory smelting tests were carried out in a...

(This article belongs to the Section Extractive Metallurgy)
  • Article
  • Open Access
223 Views
20 Pages

Low-Carbon Ferrochrome Production by Mixing Ore–Lime Melt and Ferrosilicochrome: Pilot-Scale Industrial Trials

  • Aristotel Issagulov,
  • Anuar Kopabayev,
  • Saule Sagintayeva,
  • Diana Issagulova and ,
  • Nurzhan Nurgali and
  • Armat Zhakan
  • + 1 author+ 0 author

21 October 2026

This study investigates a two-stage duplex process for producing low-carbon ferrochrome based on sequential mixing of molten ore–lime and metallic melts, with emphasis on its adaptation to the raw materials and operating conditions of the Aktob...

  • Article
  • Open Access
5 Citations
4,436 Views
15 Pages

10 March 2023

The release of Cu into water is an immediate concern that negatively affects environmental health. To eliminate this problem, the adsorption of Cu(II) on varying substances has been studied widely for two decades. The utilization of low-cost adsorben...

(This article belongs to the Special Issue Advances in Wastewater Treatment: Adsorption Mechanism, Isotherms, Kinetics and Reusability)
  • Article
  • Open Access
15 Citations
4,191 Views
16 Pages

Preparation and Hydration Mechanisms of Low Carbon Ferrochrome Slag-Granulated Blast Furnace Slag Composite Cementitious Materials

  • Chao Ren,
  • Keqing Li,
  • Yonghua Wang,
  • Yanfang Li and ,
  • Jiannan Tong and
  • Jingyao Cai
  • + 1 author+ 0 author

16 March 2023

Low carbon ferrochrome slag (LCFS) is the metallurgical waste slag from the carbon ferrochrome alloy smelting process. Compared with high carbon ferrochrome slag, LCFS has great potential as cementitious material; the chemical compositions of the two...

(This article belongs to the Special Issue Preparation and Properties of New Cementitious Materials)
  • Article
  • Open Access
455 Views
16 Pages

Stabilization of Self-Disintegrating Refined Ferrochrome Slags Using Desulfurized Borate Ore from the Inder Deposit: A Comparative Study with Colemanite

  • Murat Kuanyshev,
  • Otegen Sariyev,
  • Nurbek Aitkenov,
  • Zhumabay Tukashev and ,
  • Bauyrzhan Kelamanov,
  • Almas Yerzhanov,
  • Gulnara Zhabalova and
  • Aigerim Abilberikova
  • + 3 authors+ 0 author

9 July 2026

The production of refined ferrochrome is accompanied by the formation of self-disintegrating slags caused by the β→γ-Ca2SiO4 polymorphic transformation during cooling, resulting in environmental and technological problems. This study...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
3 Citations
2,271 Views
13 Pages

11 May 2023

In order to determine a way to be able to shorten the smelting time of low-carbon ferrochrome alloys and to strengthen the temperature control capability of the AOD converter during the smelting process, this article establishes a mechanism model of...

(This article belongs to the Special Issue Modeling, Simulation, Control, and Optimization of Processes)
  • Article
  • Open Access
17 Citations
2,791 Views
18 Pages

Carbon-Free Smelting of Ferrochrome Using FeAlSiCa Alloy

  • Amankeldy Akhmetov,
  • Zulfiadi Zulhan,
  • Zhadiger Sadyk,
  • Azamat Burumbayev and ,
  • Armat Zhakan,
  • Sultan Kabylkanov,
  • Ruslan Toleukadyr,
  • Zhalgas Saulebek,
  • Zhuldyz Ayaganova and
  • Yerbolat Makhambetov
  • + 5 authors+ 0 author

2 June 2025

This study explored the feasibility of the carbon-free smelting of ferrochrome (FeCr) using a complex reducing agent—ferroaluminosilicalcium alloy (FeAlSiCa)—produced from industrial waste and ferrosilicochrome (FeSiCr) dust. Laboratory-s...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
8 Citations
1,469 Views
21 Pages

Effect of Nano Ferrochrome Slag-Infused Polymer Matrix on Mechanical Properties of Bidirectional Carbon Fiber-Reinforced Polymer Composite

  • Sultan Saif Al mamari,
  • Sabariah Julai,
  • Mohd Faizul Mohd Sabri,
  • Lenin Anselm Wilson Annamal and
  • S. M. Shahabaz

18 September 2025

Polymeric nanocomposites have been extensively investigated due to their potential for enhancing the mechanical and tribological properties of polymer composites. In this study, the mechanical performance of carbon fiber-reinforced epoxy composites m...

(This article belongs to the Section Polymer Fibers)
  • Article
  • Open Access
3 Citations
3,038 Views
15 Pages

An Energy Efficient Advanced Comminution Process to Treat Low-Grade Ferrochrome Slag Using High-Pressure Grinding Rolls

  • Talasetti Santosh,
  • Chinthapudi Eswaraiah,
  • Shivakumar Irappa Angadi,
  • Sunil Kumar Tripathy and ,
  • Rahul Kumar Soni and
  • Danda Srinivas Rao
  • + 1 author+ 0 author

30 March 2023

The present research aims to analyze the comminution behavior of ferrochrome slag using high-pressure grinding rolls. The laboratory bench scale high-pressure grinding rolls were used to study the three significant variables on the grinding efficienc...

(This article belongs to the Section B: Energy and Environment)
  • Article
  • Open Access
13 Citations
1,817 Views
15 Pages

Development of a Briquetting Method for Dust from High-Carbon Ferrochrome (HC FeCr) Crushing Using Vibropressing on an Industrial Scale and Its Subsequent Remelting

  • Otegen Sariyev,
  • Maral Almagambetov,
  • Nurzhan Nurgali,
  • Gulnur Abikenova and ,
  • Bauyrzhan Kelamanov,
  • Dauren Yessengaliyev and
  • Assylbek Abdirashit
  • + 2 authors+ 0 author

3 June 2025

The article provides a brief overview of technologies and methods for processing dispersed metallic waste generated during ferroalloy production, including high-carbon ferrochrome (HCFeCr). It is noted that the most cost-effective and rational method...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
1 Citations
1,309 Views
15 Pages

Evaluation of the Rutting Performance of Hot-Mix Asphalt Concrete Containing Ferrochrome Slag Aggregate

  • Hossam F. Hassan,
  • Khalid Al-Shamsi,
  • Khalifa Al-Jabri and
  • Saba Al Amri

Ferrochrome (FeCr) slag is a by-product of high-carbon ferrochromium, which is used in the manufacturing of stainless steel. In this study, FeCr was evaluated as a replacement for natural aggregates in hot-mix asphalt (HMA) bituminous base and wearin...

(This article belongs to the Special Issue Advances in Sustainable Construction Materials for Asphalt Pavements)
  • Article
  • Open Access
3 Citations
1,893 Views
25 Pages

Ferrochrome Smelting Using Chrome Raw Materials Pre-Reduced with Various Reducing Agents

  • Isagulov Aristotel,
  • Saulebek Zhalgas,
  • Sagintayeva Saule and
  • Makhambetov Yerbolat

23 March 2026

This study quantitatively evaluates the effect of solid-phase pre-reduction of chromite concentrate on the energy efficiency and techno-economic performance of high-carbon ferrochrome (HC FeCr) smelting. Laboratory pre-reduction experiments were cond...

  • Review
  • Open Access
59 Citations
19,367 Views
35 Pages

An Overview of Currently Applied Ferrochrome Production Processes and Their Waste Management Practices

  • Stephanus P. du Preez,
  • Tristan P. M. van Kaam,
  • Eli Ringdalen,
  • Merete Tangstad and ,
  • Kazuki Morita,
  • Dmitri G. Bessarabov,
  • Pieter G. van Zyl and
  • Johan P. Beukes
  • + 3 authors+ 0 author

13 June 2023

Ferrochrome (FeCr) is the main source of virgin chromium (Cr) units used in modern-day chromium (Cr) containing alloys. The vast majority of produced Cr is used during the production of stainless steel, which owes its corrosion resistance mainly to t...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
4 Citations
935 Views
13 Pages

Briquetting and Remelting of Aspiration Dust Generated During High-Carbon Ferrochrome Crushing in Direct Current Electric Arc Furnaces

  • Otegen Sariyev,
  • Maral Almagambetov,
  • Nurzhan Nurgali,
  • Kanat Bilyalov and ,
  • Bauyrzhan Kelamanov,
  • Dauren Yessengaliyev and
  • Assylbek Abdirashit
  • + 2 authors+ 0 author

16 March 2026

This study addresses the problem of efficient utilization of aspiration dust (AD) generated during crushing of high-carbon ferrochrome (HCFeCr). To solve this issue, a briquetting technology was proposed, involving aspiration dust blended with dry ga...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
8 Citations
1,467 Views
15 Pages

Utilization of Chromite Spinel Powder in the Metallothermic Smelting of Low-Carbon Ferrochrome

  • Yerbolat Makhambetov,
  • Magzhan Kutzhanov,
  • Ruslan Toleukadyr,
  • Aibar Myrzagaliyev and ,
  • Zhadiger Sadyk,
  • Zhalgas Saulebek and
  • Amankeldy Akhmetov
  • + 2 authors+ 0 author

18 July 2025

This study investigates the feasibility of producing low-carbon FeCr via metallothermic smelting of Cr concentrate and chromite spinel powder using a complex FeAlSiCa alloy as the reductant in an induction furnace. The proposed approach offers an alt...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
12 Citations
1,441 Views
15 Pages

Assessment of Physicochemical Properties of Dust from Crushing High-Carbon Ferrochrome: Methods for Agglomeration

  • Otegen Sariyev,
  • Assylbek Abdirashit,
  • Maral Almagambetov,
  • Nurzhan Nurgali and ,
  • Bauyrzhan Kelamanov,
  • Dauren Yessengaliyev and
  • Azamat Mukhambetkaliyev
  • + 2 authors+ 0 author

19 February 2025

Fine classes of metal dust generated during the production of ferroalloys increase the likelihood of irretrievable losses, creating the prerequisites for the development of rational methods for processing this material. One of the known technologies...

  • Article
  • Open Access
6 Citations
1,784 Views
15 Pages

Processing of Secondary Raw Materials from Ferrochrome Production via Agglomeration and Study of Their Mechanical Properties

  • Yerlan Zhumagaliyev,
  • Yerbol Shabanov,
  • Maral Almagambetov,
  • Maulen Jundibayev and ,
  • Nursultan Ulmaganbetov,
  • Salamat Laikhan,
  • Akgul Jundibayeva,
  • Aigerim Abilberikova,
  • Nurbala Ubaidulayeva and
  • Rysgul Adaibayeva
  • + 5 authors+ 0 author

6 August 2025

In the process of producing ferroalloys, a large amount of secondary raw materials is formed, including slag, aspiration dusts and sludge. The recycling of secondary raw materials can create resources and bring environmental and economic benefits. We...

  • Article
  • Open Access
4 Citations
1,279 Views
14 Pages

Sustainable Chromium Remediation: Sorption of Chromium from Leaching Solutions of Refined

  • Gita Sultanbayeva,
  • Raushan Kaiynbayeva,
  • Raissa Chernyakova,
  • Hamdi Temel and ,
  • Umirzak Jussipbekov and
  • Khaidar Tassibekov
  • + 1 author+ 0 author

19 March 2025

Chromium pollution has emerged as a critical environmental concern, prompting extensive research into the chemical and mineralogical properties of refined ferrochrome (RFC) slag, the leaching of chromium using sulfuric acid, and the adsorption of chr...

  • Article
  • Open Access
11 Citations
2,861 Views
11 Pages

Effect of Phase Composition on Leaching Behavior and Mechanical Properties of Ceramics from Ferrochrome Slag and Tundish Slag

  • Dejian Pei,
  • Yu Li,
  • Xiangjie Duan,
  • Daqiang Cang and ,
  • Yindong Yang,
  • Alex McLean,
  • Zhancheng Guo and
  • Chuanhua Xu
  • + 3 authors+ 0 author

8 March 2022

Ferrochrome slag (FS) and tundish slag (TS) are two typical slags containing high contents of Cr2O3 (3.88 wt.%) and MnO (18.69 wt.%), respectively. In this study, batches of ceramics were prepared from FS and TS, and their Cr/Mn leaching behaviors, m...

(This article belongs to the Special Issue Industrial Solid Wastes for Construction and Building Materials)
  • Article
  • Open Access
12 Citations
7,639 Views
18 Pages

29 January 2018

This paper describes an innovative process for the production of ferrochromium alloy via segregation reduction of chromite at 1300 °C in the presence of calcium chloride. Both charcoal and petroleum coke were used as the reductant. Individual polycry...

(This article belongs to the Special Issue Towards Sustainability in Extractive Metallurgy)
  • Article
  • Open Access
14 Citations
3,383 Views
15 Pages

Anthropogenic Sources Dominate Foliar Chromium Dust Deposition in a Mining-Based Urban Region of South Africa

  • Sutapa Adhikari,
  • Anine Jordaan,
  • Johan Paul Beukes and
  • Stefan John Siebert

Dust pollution can be severe in urban centers near mines and smelters. Identification of dust sources and assessing dust capturing plant morphological traits may help address the problem. A chromium (Cr) mining and ferrochrome smelting region in Sekh...

(This article belongs to the Special Issue Sustainable Cities: Environmental Regeneration for Healthier Lives)
  • Article
  • Open Access
13 Citations
3,715 Views
13 Pages

Properties of Glass-Ceramics Prepared from Industrial Multi-Wastes

  • Zuoliang Zhang,
  • Heli Ma,
  • Chunlei Wu,
  • Ye Sun and ,
  • Ren Chen and
  • Xiaoying Guo
  • + 1 author+ 0 author

12 September 2023

Because of their excellent properties, glass-ceramics have been widely developed and applied in many fields, and there are many potential application values to be disseminated. The preparation of glass-ceramics from industrial slag and metallurgical...

(This article belongs to the Section Purification Technology)
  • Article
  • Open Access
287 Views
11 Pages

Optimization of Chromium Production Waste Treatment Processes

  • Alexander Kim,
  • Alexander Akberdin,
  • Ruslan Sultangaziyev and
  • Kalamkas Titosheva

4 September 2026

This paper presents the results of a study on the utilization of chromium-containing waste in the production of mineral wool based on natural basalt. It was shown that a mixture of low-dolomite chromate sludge and low-carbon ferrochrome slag in a 1:1...

  • Article
  • Open Access
7 Citations
2,317 Views
21 Pages

Influence of Chromite Ore Selection on the Pelletized Oxidative Sintering Process: A South African Case Study

  • Yolindi van Staden,
  • Stephanus Petrus du Preez,
  • Johan Paul Beukes,
  • Pieter Gideon van Zyl and
  • Jason Groenewald

26 November 2024

The smelting of chromite to produce ferrochrome (FeCr) and subsequently, stainless steel, is an energy-intensive carbothermic process. Various countries apply the Outotec FeCr process, which employs oxidative sintering in air to produce mechanically...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
30 Citations
7,508 Views
24 Pages

The Use of Hydrogen as a Potential Reductant in the Chromite Smelting Industry

  • Jamey Davies,
  • Dogan Paktunc,
  • José Juan Ramos-Hernandez,
  • Merete Tangstad and ,
  • Eli Ringdalen,
  • Johan P. Beukes,
  • Dmitri G. Bessarabov and
  • Stephanus P. Du Preez
  • + 3 authors+ 0 author

25 April 2022

The chromium (Cr) content of stainless steel originates from recycled scrap and/or ferrochrome (FeCr), which is mainly produced by the carbothermic reduction of chromite ore. Ever-increasing pressure on FeCr producers to curtail carbon emissions just...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
25 Citations
5,632 Views
25 Pages

The Effect of Pre-Oxidation on the Reducibility of Chromite Using Hydrogen: A Preliminary Study

  • Jamey Davies,
  • Merete Tangstad,
  • Eli Ringdalen,
  • Johan Paul Beukes and ,
  • Dmitri Bessarabov and
  • Stephanus Petrus du Preez
  • + 1 author+ 0 author

20 July 2022

The majority of ferrochrome (FeCr) is produced through the carbothermic reduction of chromite ore. In recent years, FeCr producers have been pressured to curve carbon emissions, necessitating the exploration of alternative smelting methods. The use o...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
1 Citations
763 Views
15 Pages

Agglomeration of Fine-Grained Chromium-Containing Materials Using Rigid Extrusion

  • Nursultan Ulmaganbetov,
  • Maral Almagambetov,
  • Yerbolat Makhambetov,
  • Armat Zhakan and ,
  • Zhadiger Sadyk,
  • Zhalgas Saulebek,
  • Ruslan Toleukadyr and
  • Diana Isagulova
  • + 3 authors+ 0 author

20 May 2026

This study investigates the agglomeration of chromium-containing dust from ferroalloy production using rigid vacuum extrusion. Direct utilization of fine technogenic materials in submerged arc furnaces is limited due to poor gas permeability, increas...

  • Review
  • Open Access
376 Views
32 Pages

Comparative Technological Routes for Processing Chromo-Magnesian Ore Materials into Chemical and Metallurgical Products: A Systematic Review

  • Yerlan Zhumagaliyev,
  • Yerbol Shabanov,
  • Zhadra Shilmagambetova,
  • Victor Semenikhin and ,
  • Aliya Mazhit,
  • Karlyga Almuratova,
  • Svetlana Semenikhina,
  • Bauyrrzhan Orynbayev,
  • Saltanat Zhumagaliyeva and
  • Akylbek Shairzhanov
  • + 6 authors+ 1 author

3 August 2026

Chromo-magnesian ore materials constitute a complex resource base for producing both metallurgical and chemical products, yet existing research remains fragmented across beneficiation, smelting, chemical extraction, waste valorization, and refractory...

  • Article
  • Open Access
1 Citations
375 Views
25 Pages

Comparative Performance of Bio-Carbon and Petroleum Coke as Reductants in CaCl2 Assisted Direct Reduction of Chromite

  • David Carter,
  • Jason P. Coumans,
  • Nail Zagrtdenov,
  • Dominique Duguay and
  • Dogan Paktunc

9 September 2026

CaCl2-assisted Direct Reduction of Chromite (DRC) is a potentially lower energy alternative to conventional chromite smelting to produce ferrochrome (FeCr). This study investigates the technical feasibility of substituting petroleum coke (PC) with bi...

(This article belongs to the Section Metals and Alloys)
  • Review
  • Open Access
37 Citations
7,761 Views
21 Pages

Valuable Recovery Technology and Resource Utilization of Chromium-Containing Metallurgical Dust and Slag: A Review

  • Ju Xu,
  • Mengke Liu,
  • Guojun Ma,
  • Dingli Zheng and ,
  • Xiang Zhang and
  • Yanglai Hou
  • + 1 author+ 0 author

18 October 2023

As a type of metallurgical solid waste with a significant output, chromium-containing metallurgical dust and slag are gaining increasing attention. They mainly include stainless steel dust, stainless steel slag, ferrochrome dust, and ferrochrome slag...

(This article belongs to the Special Issue Comprehensive Utilization of Metallurgical Resources and Environmental Protection)
  • Article
  • Open Access
5 Citations
2,776 Views
18 Pages

Physical and Chemical Studies of Smelting Products of Calcinated Composite Pellets Produced from Chromium Production Waste

  • Almagul Ultarakova,
  • Yerbulat Tastanov,
  • Nurzhan Sadykov,
  • Aisha Tastanova and
  • Zhadyra Yerzhanova

14 September 2023

This study presents the results of the enlarged laboratory research on the melting of calcined composite pellets for ferrochrome obtained from fine-dispersed conditioned chrome concentrate containing 50.3% Cr2O3. This is a product of the gravitationa...

(This article belongs to the Special Issue Multiscale Composite Materials Characterization—Manufacturing, Testing and Structural Integrity Analysis, Volume II)
  • Article
  • Open Access
11 Citations
8,147 Views
19 Pages

Characterisation of a Real-World Søderberg Electrode

  • Ralph Ivor Glastonbury,
  • Johan Paul Beukes,
  • Pieter Gideon van Zyl,
  • Merete Tangstad and ,
  • Eli Ringdalen,
  • Douglas Dall,
  • Joalet Dalene Steenkamp and
  • Masana Mushwana
  • + 3 authors+ 0 author

22 December 2020

Very little research on Søderberg electrodes has been published in the journal peer reviewed public domain. The main aim of this work is to characterise a Søderberg electrode that was cut off approximately 0.5 m below the contacts shoes...

(This article belongs to the Special Issue Advances in Pyrometallurgy)
  • Article
  • Open Access
2 Citations
823 Views
16 Pages

Atmospheric Induction Direct Chromium Alloying of Steel Using FeAlSiCa as a Metallothermic Reductant

  • Amankeldy Akhmetov,
  • Yerbolat Makhambetov,
  • Arnat Smagulov,
  • Zhadiger Sadyk and ,
  • Ruslan Toleukadyr and
  • Sailaubai Baisanov
  • + 1 author+ 0 author

12 March 2026

The study investigates the technology of direct Cr alloying of steel in an induction furnace using Cr-containing oxide raw materials and an FeAlSiCa metallothermic reducing agent under atmospheric conditions. The experimental design included four cha...

(This article belongs to the Special Issue Advances in Efficient Utilization of Metallurgical Solid Waste)
  • Article
  • Open Access
11 Citations
1,610 Views
17 Pages

Electric Arc Metallothermic Smelting of FeCr Using FeAlSiCa as a Reductant

  • Yerbolat Makhambetov,
  • Zhadiger Sadyk,
  • Armat Zhakan,
  • Azamat Burumbayev and ,
  • Sultan Kabylkanov,
  • Aibar Myrzagaliyev,
  • Dastan Aubakirov,
  • Natalya Lu and
  • Amankeldy Akhmetov
  • + 4 authors+ 0 author

9 September 2025

This study investigates the use of the complex reductant FeAlSiCa as an alternative to the conventional FeSiCr in the EAF smelting of FeCr. The smelting process using FeAlSiCa is characterized by a stable furnace operation, active discharge of metal...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
334 Views
17 Pages

Influence of Process Parameters on Chromium Metallization During Chromite Pellet Pre-Reduction

  • Ainash Akmanova,
  • Aristotel Issagulov,
  • Saule Sagintayeva,
  • Dastan Aubakirov and ,
  • Diana Issagulova,
  • Aibar Myrzagaliyev and
  • Yerbolat Makhambetov
  • + 2 authors+ 0 author

22 September 2026

The present study compares the effects of temperature, holding time, and nominal carbon excess on the pre-reduction of Donskoy chromite pellets with semi-coke. FactSage equilibrium calculations were interpreted alongside three laboratory series with...

(This article belongs to the Section Extractive Metallurgy)
  • Article
  • Open Access
32 Citations
6,193 Views
25 Pages

Assessment of Mineralogical Characteristics of Clays and the Effect of Waste Materials on Their Index Properties for the Production of Bricks

  • Aamar Danish,
  • Ermedin Totiç,
  • Muhammed Bayram,
  • Mücahit Sütçü and ,
  • Osman Gencel,
  • Ertuğrul Erdoğmuş and
  • Togay Ozbakkaloglu
  • + 2 authors+ 0 author

13 December 2022

Significant research investigations on the characteristics of unexplored clay deposits are being conducted in light of the growing need for clay in the ceramic industry and the variable chemistry of clays. Parallel to this, the generation of waste ma...

(This article belongs to the Special Issue Environmental Impact on Mechanical Properties of Construction Materials)
  • Article
  • Open Access
16 Citations
3,930 Views
17 Pages

Recovery of Chromium from Slags Leachates by Electrocoagulation and Solid Product Characterization

  • Lubomir Pikna,
  • Maria Hezelova,
  • Agnieszka Morillon,
  • David Algermissen and ,
  • Ondrej Milkovic,
  • Robert Findorak,
  • Martin Cesnek and
  • Jaroslav Briancin
  • + 3 authors+ 0 author

27 November 2020

Slags produced in the steelmaking industry could be a source of chromium. Slags contain, depending on different types of slags, between 2 to 5 wt.% of Cr. Roasting of slag with NaOH, followed by subsequent leaching can produce leachates which can be...

(This article belongs to the Section Extractive Metallurgy)
  • Article
  • Open Access
6 Citations
2,182 Views
13 Pages

22 May 2024

Zero-valent iron (Fe0) has been extensively used in hexavalent chromium (Cr(VI)) removal from groundwater, but its treatment suffers from interference of humic acid (HA) and ferrochrome precipitate. In this study, a biotic Fe0 system was established...

(This article belongs to the Section Water Resources Management, Policy and Governance)
  • Article
  • Open Access
1 Citations
673 Views
13 Pages

Thermodynamic and Kinetic Study of Chromium Ore Reduction Using Complex Fe–Si–Cr and Al–Si–Cr Alloys

  • Askhat Akuov,
  • Alibek Baisanov,
  • Bauyrzhan Kelamanov,
  • Aidana Baisanova and ,
  • Nina Vorobkalo and
  • Yerulan Samuratov
  • + 1 author+ 0 author

8 May 2026

This study investigates the thermodynamic and kinetic features of chromium reduction from chromium ore using complex Fe–Si–Cr and Al–Si–Cr alloys as reducing agents for the refined ferrochrome production. The thermodynamic pro...

(This article belongs to the Section Extractive Metallurgy)
  • Article
  • Open Access
2 Citations
1,820 Views
19 Pages

25 February 2025

The direct hot modification and subsequent preparation of qualified building materials from molten slag has gained significant attention at present due to its characteristics of saving energy and reducing CO2 emissions. Molten silicomanganese slag, d...

of 2