Skip to Content
You are currently on the new version of our website. Access the old version .

57 Results Found

  • Article
  • Open Access
3,855 Views
13 Pages

11 December 2021

Continuous work on a new generation of actuators, referred to as artificial muscles, resulted in the initiation of work on electrostatic zipping actuators, the concept of which is derived from micro electro-mechanical devices. Despite partial knowled...

  • Article
  • Open Access
11 Citations
8,263 Views
17 Pages

8 January 2017

In this article, the pull-in instability and dynamic characteristics of electrostatically actuated suspended microchannel resonators are studied. A theoretical model is presented to describe the pull-in effect of suspended microchannel resonators by...

(This article belongs to the Collection Modeling, Testing and Reliability Issues in MEMS Engineering)
  • Article
  • Open Access
8 Citations
7,390 Views
12 Pages

24 March 2016

In this study, a new analytical model is developed for an electrostatic Microelectromechanical System (MEMS) cantilever actuator to establish a relation between the displacement of its tip and the applied voltage. The proposed model defines the micro...

  • Article
  • Open Access
17 Citations
3,574 Views
13 Pages

29 September 2021

This work presents the results of the experimental and theoretical study of the static pull-in of tilting actuation executed by a hybrid levitation micro-actuator (HLMA) based on the combination of inductive levitation and electrostatic actuation. A...

(This article belongs to the Special Issue Cooperative Microactuator Systems)
  • Review
  • Open Access
165 Citations
24,472 Views
23 Pages

Review on the Modeling of Electrostatic MEMS

  • Wan-Chun Chuang,
  • Hsin-Li Lee,
  • Pei-Zen Chang and
  • Yuh-Chung Hu

21 June 2010

Electrostatic-driven microelectromechanical systems devices, in most cases, consist of couplings of such energy domains as electromechanics, optical electricity, thermoelectricity, and electromagnetism. Their nonlinear working state makes their analy...

(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering - 2009)
  • Article
  • Open Access
3 Citations
3,293 Views
11 Pages

25 October 2021

In this paper, a novel photovoltaic-electrostatic hybrid actuator with a slant lower electrode based on the PLZT ceramic is proposed. The mathematical model of photovoltaic-electrostatic hybrid actuator is established. Then, based on the mathematical...

(This article belongs to the Special Issue Miniature and Micro-Actuators)
  • Article
  • Open Access
3 Citations
2,618 Views
28 Pages

3 February 2023

Recently, a circular symmetrical nonlinear stationary 2D differential model for biomedical micropumps, where the amplitude of the electrostatic field is locally proportional to the curvature of the membrane, was studied in detail. Starting from this,...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
23 Citations
10,429 Views
14 Pages

28 July 2010

A gap with variable geometry is presented for both cantilever beam and fixed-fixed beam actuators as a method to reduce the pull-in voltage while maintaining a required displacement. The method is applicable to beams oriented either in a plane parall...

  • Article
  • Open Access
5 Citations
4,697 Views
20 Pages

Analysis of Collapse–Snapback Phenomena in Capacitive Micromachined Ultrasound Transducers

  • Chloé Halbach,
  • Veronique Rochus,
  • Jan Genoe,
  • Xavier Rottenberg and ,
  • David Cheyns and
  • Paul Heremans
  • + 1 author+ 0 author

29 January 2025

The pull-in and pull-out voltages are important characteristics of Capacitive Micromachined Ultrasound Transducers (CMUTs), marking the transition between conventional and collapse operation regimes. These voltages are commonly determined using capac...

(This article belongs to the Special Issue MEMS Ultrasonic Transducers)
  • Article
  • Open Access
4 Citations
3,889 Views
23 Pages

18 October 2021

The mechanism of the inchworm motor, which overcomes the intrinsic displacement and force limitations of MEMS electrostatic actuators, has undergone constant development in the past few decades. In this work, the electrostatic actuation unit cell (AU...

(This article belongs to the Special Issue Cooperative Microactuator Systems)
  • Article
  • Open Access
2 Citations
3,712 Views
15 Pages

25 April 2024

MEMS electrostatic actuators can suffer from a high control voltage and a limited displacement range, which are made more prevalent by the pull-in effect. This study explores a tri-electrode topology to enable a reduction in the control voltage and e...

(This article belongs to the Section Sensor Materials)
  • Article
  • Open Access
6 Citations
3,245 Views
16 Pages

MEMS Smart Glass with Larger Angular Tuning Range and 2D Actuation

  • Md Kamrul Hasan,
  • Mustaqim Siddi Que Iskhandar,
  • Steffen Liebermann,
  • Shilby Baby and ,
  • Jiahao Chen,
  • Muhammad Hasnain Qasim,
  • Dennis Löber,
  • Roland Donatiello,
  • Guilin Xu and
  • Hartmut Hillmer
  • + 5 authors+ 0 author

31 December 2024

Millions of electrostatically actuatable micromirror arrays have been arranged in between windowpanes in inert gas environments, enabling active daylighting in buildings for illumination and climatization. MEMS smart windows can reduce energy consump...

(This article belongs to the Collection Optical MEMS: Design, Fabrication, Control, Modeling and Developments)
  • Article
  • Open Access
361 Views
40 Pages

17 September 2026

High-fidelity continuum models of electrostatically actuated MEMS accurately capture distributed electromechanical interactions but are computationally expensive for repeated simulation, optimization, and real-time applications. This work develops a...

(This article belongs to the Special Issue MEMS and NEMS Sensors: Innovations, Applications, and Future Directions in Micro/Nano Technologies, 2nd Edition)
  • Article
  • Open Access
6 Citations
6,306 Views
15 Pages

12 January 2018

In this paper, analytical closed-form expressions to accurately estimate the pull-in characteristics of an electrostatically-actuated doubly-clamped nanobeam are derived and examined. In this regard, a coupled electro-mechanical problem for the nano-...

  • Article
  • Open Access
1 Citations
3,289 Views
22 Pages

Design, Fabrication, and Dynamic Analysis of a MEMS Ring Resonator Supported by Twin Circular Curve Beams

  • Ahmad Rahbar Ranji,
  • Gnanesh Nagesh,
  • Fangyan Sun and
  • Mohammed Jalal Ahamed

11 July 2024

In this paper, we present a compressive study on the design and development of a MEMS ring resonator and its dynamic behavior under electrostatic force when supported by twin circular curve beams. Finite element analysis (FEA)-based modeling techniqu...

(This article belongs to the Special Issue Chip-Based MEMS Platforms)
  • Article
  • Open Access
4 Citations
5,815 Views
16 Pages

21 November 2024

Despite major advances in the field of actuator technology for microsystems, miniaturized microfluidic actuation systems for mobile devices are still not common in the market. We present a micropump concept and an associated mass flow sensor design,...

  • Feature Paper
  • Article
  • Open Access
6 Citations
4,316 Views
16 Pages

30 August 2019

This paper investigates the lateral pull-in effect of an in-plane overlap-varying transducer. The instability is induced by the translational and rotational displacements. Based on the principle of virtual work, the equilibrium conditions of force an...

(This article belongs to the Collection Modeling, Testing and Reliability Issues in MEMS Engineering)
  • Abstract
  • Open Access
1,496 Views
3 Pages

Employing a tri-electrode electrostatic actuator revealed a significant improvement in reducing the controlling voltage. However, the primary electrode fixed voltage can be a few times higher than the conventional topology. In this work, materials wi...

(This article belongs to the Proceedings of XXXV EUROSENSORS Conference)
  • Article
  • Open Access
3 Citations
2,983 Views
16 Pages

Capacitance–Voltage Studies on Electrostatically Actuated MEMS Micromirror Arrays

  • Jiahao Chen,
  • Xiaohui Yang,
  • Mustaqim Siddi Que Iskhandar,
  • Md. Kamrul Hasan and ,
  • Shilby Baby,
  • Muhammad Hasnain Qasim,
  • Dennis Löber,
  • Shujie Liu,
  • Roland Donatiello and
  • Hartmut Hillmer
  • + 7 authors+ 2 authors

29 January 2025

This article presents the electrostatic actuation performance of micromirror arrays for intelligent active daylight control and energy management in green buildings using a capacitive–voltage (C-V) measurement technique. In order to understand...

(This article belongs to the Collection Optical MEMS: Design, Fabrication, Control, Modeling and Developments)
  • Article
  • Open Access
105 Citations
13,367 Views
22 Pages

15 February 2008

We study the influence of von Karman nonlinearity, van der Waals force, and a athermal stresses on pull-in instability and small vibrations of electrostatically actuated mi-croplates. We use the Galerkin method to develop a tractable reduced-order mo...

(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering)
  • Article
  • Open Access
8 Citations
7,669 Views
14 Pages

Electrostatic Excitation for the Force Amplification of Microcantilever Sensors

  • Ali Shokuhfar,
  • Payam Heydari and
  • Salman Ebrahimi-Nejad

25 October 2011

This paper describes an electrostatic excited microcantilever sensor operating in static mode that is more sensitive than traditional microcantilevers. The proposed sensor comprises a simple microcantilever with electrostatic excitation ability and a...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
3 Citations
2,518 Views
20 Pages

8 July 2023

Jump and pull-in instability are common nonlinear dynamic behaviors leading to the loss of the performance reliability and structural safety of electrostatic micro gyroscopes. To achieve a better understanding of these initial-sensitive phenomena, th...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
15 Citations
8,930 Views
14 Pages

20 March 2018

A micro-machined hybrid contactless suspension, in which a conductive proof mass is inductively levitated within an electrostatic field, is studied. This hybrid suspension has the unique capability to control the stiffness, in particular along the ve...

(This article belongs to the Special Issue Micromanipulation)
  • Article
  • Open Access
17 Citations
4,066 Views
13 Pages

5 August 2021

In this research, we investigate the structural behavior, including the snap-through and pull-in instabilities, of in-plane microelectromechanical COSINE-shaped and electrically actuated clamped-clamped micro-beams resonators. The work examines vario...

(This article belongs to the Special Issue New Advances in Micromachined Resonators)
  • Article
  • Open Access
6 Citations
3,049 Views
13 Pages

Experimental Study and Simulation of Pull-In Behavior in Hybrid Levitation Microactuator for Square-Shaped Proof Masses

  • Emil R. Mamleyev,
  • Chun Him Lee,
  • Jan G. Korvink,
  • Manfred Kohl and
  • Kirill V. Poletkin

20 January 2023

This paper presents the results of a comprehensive study of the pull-in phenomenon in the hybrid levitation microactuator (HLMA), in which square-shaped proof masses (PMs) of different sizes, namely, length sides of 2.8 and 3.2 mm and thicknesses of...

(This article belongs to the Section Miniaturized and Micro Actuators)
  • Article
  • Open Access
102 Citations
22,572 Views
37 Pages

31 May 2007

Electrostatic micro-electro-mechanical system (MEMS) is a special branch with a wide range of applications in sensing and actuating devices in MEMS. This paper provides a survey and analysis of the electrostatic force of importance in MEMS, its physi...

(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering)
  • Abstract
  • Open Access
2 Citations
4,403 Views
3 Pages

Pull-In Voltage and Stress in Fixed-Fixed Beams of RF MEMS Switches

  • Anna Persano,
  • Girolamo Tagliapietra,
  • Jacopo Iannacci,
  • Alvise Bagolini and ,
  • Fabio Quaranta and
  • Pietro Siciliano
  • + 1 author+ 0 author

Electrostatically actuated microelectromechanical system (MEMS) switches with fixed- fixed beams were fabricated. FEM modeling was used to calculate the contributions of stress in the fabricated beams from the measured values of pull-in voltage. The...

(This article belongs to the Proceedings of XXXV EUROSENSORS Conference)
  • Article
  • Open Access
16 Citations
4,365 Views
24 Pages

18 March 2019

A class of bipolar electrostatically actuated micro-resonators is presented in this paper. Two parametric equations are proposed for changing the microbeam shape of the upper and lower sections. The mechanical properties of a micro-resonator can be e...

(This article belongs to the Special Issue MEMS Sensors and Resonators)
  • Article
  • Open Access
6 Citations
3,617 Views
10 Pages

On the Efficiency Enhancement of an Actively Tunable MEMS Energy Harvesting Device

  • Mortaza Aliasghary,
  • Saber Azizi,
  • Hadi Madinei and
  • Hamed Haddad Khodaparast

6 September 2022

In this paper, we propose an active control method to adjust the resonance frequency of a capacitive energy harvester. To this end, the resonance frequency of the harvester is tuned using an electrostatic force, which is actively controlled by a volt...

(This article belongs to the Topic Dynamical Systems: Theory and Applications)
  • Article
  • Open Access
8 Citations
4,637 Views
23 Pages

28 August 2017

Micro functionally graded material (FGM) structures are able to have proper functions in vast environments. In this paper, nonlinear governing equations of the size-dependent micro-switch are derived using modified couple stress theory. Effective ext...

  • Article
  • Open Access
9 Citations
8,786 Views
13 Pages

A Bi-Directional Out-of-Plane Actuator by Electrostatic Force

  • Hao Ren,
  • Weimin Wang,
  • Fenggang Tao and
  • Jun Yao

5 December 2013

Presented in this paper is a bi-directional out-of-plane actuator which combines the merits of the electrostatic repulsive principle and the electrostatic attractive principle. By taking advantage of the electrostatic repulsive mode, the common “pull...

  • Article
  • Open Access
7 Citations
9,779 Views
18 Pages

CMOS-MEMS Test-Key for Extracting Wafer-Level Mechanical Properties

  • Wan-Chun Chuang,
  • Yuh-Chung Hu and
  • Pei-Zen Chang

12 December 2012

This paper develops the technologies of mechanical characterization of CMOS-MEMS devices, and presents a robust algorithm for extracting mechanical properties, such as Young’s modulus, and mean stress, through the external electrical circuit behavior...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
15 Citations
7,713 Views
8 Pages

3D Finite Element Simulation of Graphene Nano-Electro-Mechanical Switches

  • Jothiramalingam Kulothungan,
  • Manoharan Muruganathan and
  • Hiroshi Mizuta

15 August 2016

In this paper, we report the finite element method (FEM) simulation of double-clamped graphene nanoelectromechanical (NEM) switches. Pull-in and pull-out characteristics are analyzed for graphene NEM switches with different dimensions and these are c...

(This article belongs to the Special Issue Graphene Nano-Electro-Mechanical (NEM) Devices and Applications)
  • Article
  • Open Access
8 Citations
6,573 Views
10 Pages

In situ Stiffness Adjustment of AFM Probes by Two Orders of Magnitude

  • Marcel Lambertus Cornelis De Laat,
  • Héctor Hugo Pérez Garza and
  • Murali Krishna Ghatkesar

12 April 2016

The choice on which type of cantilever to use for Atomic Force Microscopy (AFM) depends on the type of the experiment being done. Typically, the cantilever has to be exchanged when a different stiffness is required and the entire alignment has to be...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
2 Citations
2,216 Views
27 Pages

Finite Differences for Recovering the Plate Profile in Electrostatic MEMS with Fringing Field

  • Mario Versaci,
  • Luisa Fattorusso,
  • Alessandra Jannelli and
  • Paolo Di Barba

22 September 2022

Global existence and uniqueness conditions for a dimensionless fourth-order integro-differential model for an electrostatic-elastic MEMS device with parallel plates and fringing field contribution were recently achieved by the Authors. Moving from th...

(This article belongs to the Special Issue Advances in Micro Electro Mechanical Systems: From MEMS to NEMS Devices)
  • Article
  • Open Access
8 Citations
4,315 Views
23 Pages

An Improved Passivity-based Control of Electrostatic MEMS Device

  • Mutaz Ryalat,
  • Hazem Salim Damiri,
  • Hisham ElMoaqet and
  • Imad AlRabadi

16 July 2020

It is commonly known that the performance of an electrostatic microelectromechanical system (MEMS) device is limited to a specific range of the full gap distance due to the inherited “pull-in instability” phenomenon. In this work, we desi...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
3 Citations
8,530 Views
22 Pages

Nonlinear Modeling for Distortion Analysis in Silicon Bulk-Mode Ring Resonators

  • Abolfazl Bijari,
  • Sayyed-Hossein Keshmiri and
  • Farshad Babazadeh

22 August 2012

A distributed modeling approach has been developed to describe the dynamic behavior of ring resonators. The model includes the effect of large amplitudes around primary resonance frequencies, material and electrostatic nonlinearities. Through a combi...

  • Feature Paper
  • Article
  • Open Access
5 Citations
5,345 Views
16 Pages

Random Access Addressing of MEMS Electrostatic Shutter Array for Multi-Object Astronomical Spectroscopy

  • Xufeng Liu,
  • Takuya Takahashi,
  • Masahiro Konishi,
  • Kentaro Motohara and
  • Hiroshi Toshiyoshi

17 August 2020

An extended version of cross-bar type addressing technique is developed for three-port electrostatic micro shutters arranged in an arrayed format. A microelectromechanical systems (MEMS) shutter blade suspended by a pair of torsion beams works as a m...

(This article belongs to the Special Issue Optical MEMS, Volume II)
  • Article
  • Open Access
1 Citations
3,850 Views
12 Pages

5 December 2022

In this study, an electrostatically driven vertical MEMS actuator was designed using a hollow square electrode. To attain vertical actuation, a hollow square-shaped electrode was designed on the glass substrate. The silicon proof mass, containing a s...

(This article belongs to the Topic MEMS Sensors and Resonators)
  • Article
  • Open Access
8 Citations
6,248 Views
13 Pages

20 December 2023

Micromechanical switches are of significant interest for advanced radio frequency and microwave systems, but their practical implementation is limited by low reliability. Electrodes of a microscopic size develop weak contact force that leads to high...

(This article belongs to the Collection Microsystem and Nanosystem Research for Sensors, Actuators and Energy Conversion Devices)
  • Article
  • Open Access
15 Citations
4,378 Views
22 Pages

Study of Dynamics in Metallic MEMS Cantilevers—Pull-In Voltage and Actuation Speed

  • Xiaohui Yang,
  • Philipp Kästner,
  • Eireen Käkel,
  • Marek Smolarczyk and ,
  • Shujie Liu,
  • Qingdang Li and
  • Hartmut Hillmer
  • + 2 authors+ 0 author

13 January 2023

For different metals and varying geometries, this paper presents simulations of electrostatically actuated MEMS cantilevers regarding their influence on pull-in voltage and actuation speed. Three-dimensional electromechanical modeling including many...

(This article belongs to the Section Nanotechnology and Applied Nanosciences)
  • Article
  • Open Access
1 Citations
3,774 Views
14 Pages

10 September 2025

As MEMS design encounters growing challenges, particularly stiction between movable and stationary electrodes, dielectric charging, pull-in instability, and multi-valued response characteristics, the integration of dimple-equipped structures has emer...

(This article belongs to the Special Issue Advances in Nonlinear Analysis: Theory, Methods and Applications)
  • Review
  • Open Access
10 Citations
7,491 Views
38 Pages

4 April 2023

Having benefited from technological developments, such as surface micromachining, high-aspect-ratio silicon micromachining and ongoing miniaturization in complementary metal–oxide–semiconductor (CMOS) technology, some electrostatic actuat...

(This article belongs to the Special Issue Cooperative Microactuator Devices and Systems)
  • Article
  • Open Access
2 Citations
5,517 Views
14 Pages

28 December 2024

Silicon–glass anode bonding is the key technology in the process of wafer-level packaging for MEMS sensors. During the anodic bonding process, the device may experience adhesion failure due to the influence of electric field forces. A common so...

(This article belongs to the Special Issue Recent Advances in Silicon-Based MEMS Sensors and Actuators)
  • Article
  • Open Access
1 Citations
6,113 Views
16 Pages

14 August 2024

This study presents the design and simulation of an RF MEMS variable capacitor with a high tuning ratio and high linearity factor of capacitance–voltage response. An electrostatic torsion actuator with planar and non-planar structures is presen...

(This article belongs to the Collection Microsystem and Nanosystem Research for Sensors, Actuators and Energy Conversion Devices)
  • Article
  • Open Access
9 Citations
2,736 Views
28 Pages

14 January 2023

Electrostatic force nonlinearity is widely present in MEMS systems, which could impact the system sensitivity performance. The Frequency modulation (FM) method is proposed as an ideal solution to solve the problem of environmental fluctuation stabili...

(This article belongs to the Section A: Physics)
  • Article
  • Open Access
12 Citations
3,458 Views
26 Pages

Nonlinear Analysis and Performance of Electret-Based Microcantilever Energy Harvesters

  • Bashar Hammad,
  • Hichem Abdelmoula,
  • Eihab Abdel-Rahman and
  • Abdessattar Abdelkefi

7 November 2019

An energy harvester composed of a microcantilever beam with a tip mass and a fixed electrode covered with an electret layer is investigated when subject to an external harmonic base excitation. The tip mass and fixed electrode form a variable capacit...

  • Article
  • Open Access
13 Citations
14,362 Views
19 Pages

12 October 2009

In this paper, the reliability of capacitive shunt RF MEMS switches have been investigated using three dimensional (3D) coupled multiphysics finite element (FE) analysis. The coupled field analysis involved three consecutive multiphysics interactions...

(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering - 2009)
  • Article
  • Open Access
6 Citations
4,570 Views
23 Pages

29 June 2019

The paper presents a novel fully integrated MEMS-based non-resonating operated 2D mechanical scanning system using a 1D push-pull actuator. Details of the design, fabrication and tests performed are presented. The current design utilizes an integrate...

(This article belongs to the Special Issue MEMS Technology for Biomedical Imaging Applications)
  • Article
  • Open Access
10 Citations
4,353 Views
24 Pages

5 November 2018

In order to investigate the effects of geometric imperfections on the static and dynamic behavior of capacitive micomachined ultrasonic transducers (CMUTs), the governing equations of motion of a circular microplate with initial defection have been d...

(This article belongs to the Section A: Physics)

of 2