4,573 Results Found

The problem of emulsification between Phase Change Material (PCM) and Heat Transfer Fluid (HTF) in direct contact latent heat storage systems has been reported in various studies. This issue causes the PCM to flow out of the storage tank and crystall...

Photoinduced charge separation (PCS) plays an essential role in various solar energy conversions such as photovoltaic conversion in solar cells. Usually, PCS in solar cells occurs stepwise via solar energy absorption by light absorbers (dyes, inorgan...

Membrane-based direct air capture of CO₂ (m-DAC) is a promising solution for atmospheric decarbonization. Despite growing interest, the impact of relative air humidity on the performance of m-DAC systems is often neglected in the literature. This stu...

A novel process for preparing direct reduction iron (DRI) and titanium nitride (TiN) from Panzhihua titanomagnetite concentrate is proposed. This process involves pelletizing, direct reduction roasting and magnetic separation. The effects of reductio...

The metal and molecular vapor separation analysis (MMVSA) of solid samples with an atomic absorption detector (AA) was investigated for the direct determination of manganese and copper in biological materials. An open column made with a molybdenum tu...

The chromatographic resolution of pregabalin enantiomers has been often achieved by derivatization of the molecule, in order to reach enough sensitivity at low concentrations of the minor enantiomer present in the active principle. In the present art...

High-phosphorus oolitic iron ores (HPOIOs) possess abundant reserves but are incompatible with conventional blast furnace ironmaking, as phosphorus migrates into hot metals during carbothermic reduction, preventing the production of low-phosphorus cl...

The presence of a surface preferably attracting one component of a polymer mixture by the long-range van der Waals surface potential while the mixture undergoes phase separation by spinodal decomposition is called long-range surface-directed spinodal...

The force-directed paradigm is one of the few generic approaches to drawing graphs. Since force-directed algorithms can be extended easily, they are used frequently. Most of these algorithms are, however, quite slow on large graphs, as they compute a...

Direct air capture (DAC) is an emerging negative CO₂ emission technology that aims to introduce a feasible method for CO₂ capture from the atmosphere. Unlike carbon capture from point sources, which deals with flue gas at high CO₂ concentrations, car...

The multi-level spatial chromatin organization in the nucleus is closely related to chromatin activity. The mechanism of chromatin organization and remodeling attract much attention. Phase separation describes the biomolecular condensation which is t...

Direct air capture (DAC) has recently gained interest as a carbon dioxide removal (CDR) method to reduce atmospheric CO₂. DAC is mainly studied through standalone separation technologies, especially adsorption and absorption. Hybrid DAC, combining se...

GNSS reflectometry (GNSS-R) altimetry has been widely used for retrieving surface elevation over oceans, cryosphere, and land. Recently, UAV-borne GNSS-R systems have gained attention due to their flexibility for low-altitude and localized observatio...

In this study, high-purity iron with purity of 99.987 wt.% was prepared employing a process of direct reduction–melting separation–slag refining. The iron ore after pelletizing and roasting was reduced by hydrogen to obtain direct reduced...

In the present study, the direct enantiomeric separation of hexythiazox enantiomers on Lux cellulose-1, Lux cellulose-2, Lux cellulose-3, Lux cellulose-4, Lux amylose-1 and Chirapak IC chiral columns were carefully investigated by reverse-phase high-...

The coming years will see the launch of several missions (TRISHNA, LSTM, SBG), which will acquire images in four or more spectral bands in thermal infrared (TIR) at high spatial resolution (~50–60 m) and with high temporal revisit (~2–3 d...

Biological surfaces with physical discontinuity or chemical heterogeneity possess special wettability in the form of anisotropic wetting behavior. However, there are several challenges in designing and manufacturing samples with anisotropic wettabili...

To separate and locate multi-partial discharge (PD) sources in a substation, the use of spectrum differences of ultra-high frequency signals radiated from various sources as characteristic parameters has been previously reported. However, the separat...

In this paper, the process of direct reduction roasting using magnetic separation to produce direct reduction iron (DRI) from high-phosphorus oolitic hematite, using coal slime and blast furnace dust as reductant, is investigated. The possible use of...

Flow separation is easily induced at the junctions of aircraft components, and for aircraft with T-type tails, in particular, it can lead to loss of directional stability under a small sideslip angle. In the reported study, improved delayed detached...

The gas/liquid phase separation of CO₂ from a water-methanol solution at the anode side of a µDirect-Methanol-Fuel-Cell (µDMFC) plays a key role in the overall performance of fuel cells. This point is of particular importance if the &micr...

Compression molding of long fiber reinforced composites offers specific advantages in automotive applications due to the high strength to weight ratio, the comparably low tooling costs and short cycle times. However, the manufacturing process of long...

With the rapid growth of the lithium-ion battery (LIBs) market, recycling and re-using end-of-life LIBs to reclaim the critical Li, Co, Ni, and Mn has become an urgent task. Presently, high temperature, strong acid, and alkali conditions are required...

In this study, a novel direct Z-scheme SnS₂ quantum dots/sulfur-doped polyimide (SQDs/SPI) photocatalyst was firstly fabricated by an in situ crystallization growth of SnS₂ quantum dots on sulfur-doped polyimide through a facile hydrothermal method....

The paper shows that, in looking for exact solutions to nonlinear PDEs, the direct method of functional separation of variables can, in certain cases, be more effective than the method of differential constraints based on the compatibility analysis o...

In China, direct-reverse flotation is proved to be applicable to most phosphate ores. However, because the ratio of froth product is generally high, current direct-reverse technology faces challenges in terms of high reagent consumptions and cost. A...

Evidence of chemical disequilibria and other anomalous observations in the Venusian atmosphere motivate the search for life within the planet’s temperate clouds. To find signs of a Venusian aerial biosphere, a dedicated astrobiological space mi...

This proof-of-concept (PoC) study presents a pipeline made by two blocks: 1. the identification of the network that generates interictal epileptic activity; and 2. the study of the time course of the electrical activity that it generates, called neur...

This paper addresses the two-dimensional (2D) direction-of-arrival (DOA) estimation problem with two novel methods for mixed noncircular and circular signals. The first proposed method is named the two-stage direction-of-arrival matrix (TSDOAM) metho...

Single crystal (SX) is widely used in modern turbine blades to improve the creep fracture, fatigue, oxidation, and coating properties of the turbine, so that the turbine engine has excellent performance and durability. In this paper, the single cryst...

The separation models are tools used in solar engineering to estimate direct normal (DNI) and diffuse horizontal (DHI) solar irradiances from measurements of global solar irradiance (GHI). This paper proposes two empirical separation models that stan...

This work reports numerical investigation of lateral migration of a paramagnetic microparticle of an elliptic shape in a plane Poiseuille flow of a Newtonian fluid under a uniform magnetic field by direct numerical simulation (DNS). A finite element...

It is a challenging but key task to reduce the tritium inventory in EU-DEMO to levels that are acceptable for a nuclear regulator. As solution to this issue, a smart fuel cycle architecture is proposed based on the concept of Direct Internal Recyclin...

In this study, the feasibility of converting iron-bearing tailings from urban steel scrap recycling to value-added direct reduced iron (DRI) via magnetic separation followed by hydrogen reduction under microwave irradiation was investigated, with an...

This paper studies blind source separation (BSS) for frequency hopping (FH) sources. These radio frequency (RF) signals are observed by a uniform linear array (ULA) over (i) line-of-sight (LOS), (ii) single-cluster, and (iii) multiple-cluster Spatial...

Fluorine-containing polymers occupy a peculiar niche among conventional polymers due to the unique combination of physicochemical properties. Direct surface fluorination of the polymeric materials is one of the approaches for the introduction of fluo...

The effects of basicity and MgO content on reduction behavior and separation of iron and slag during smelting vanadium titanomagnetite by electric furnace were investigated. The reduction behaviors affect the separation of iron and slag in the direct...

Distinct seasonal characteristics of monsoon climate significantly affect river streamflow in South Korea. The roles of direct runoff and baseflow on streamflow have become more important to ecosystems and human communities in various watersheds of S...

The increase in emissions and concentration of carbon dioxide in the atmosphere necessitates the implementation of direct carbon dioxide capture technologies. The article presents the characteristics of a single-stage membrane unit for the direct cap...

The coal-based direct reduction followed by magnetic separation (CDRMS) is an efficient iron extraction and dephosphorization process, which requires adding additives to improve the phosphorus removal rate. Compared with other additives, sodium carbo...

This paper considers the complex-valued mixing matrix estimation and direction-of-arrival (DOA) estimation of synchronous orthogonal frequency hopping (FH) signals in the underdetermined blind source separation (UBSS). A novel mixing matrix estimatio...

Within the turbomachinery industry, components are currently assessed deploying standard second-order steady solvers. These are unable to capture complicated unsteady phenomena that have a critical impact on component performance. In this work, the h...

In this paper, we propose a robust deep learning (DL)-based method for Direction-of-Arrival (DOA) estimation. Specifically, we develop a novel CRDCNN-LSTM network architecture, which integrates a Cross-Residual Depthwise Convolutional Neural Network...

The application of semiconductor photocatalysts with narrow band gaps is hindered by the rapid recombination of electron–hole pairs and limitation of multiple reactive oxygen species (ROS) synchronous generation. A n–n-type direct Z-schem...

Experimental findings to contribute to the preliminary design of a metal foil pump for fuel separation in the Direct Internal Recycling loop of the DEMO fusion device are presented. In parametric studies on a small-scale superpermeation experiment wi...

Waste copper slag is a typical hazardous solid waste containing a variety of valuable elements and has not been effectively disposed of so far. In this paper, a stepwise extraction process was proposed to recover valuable elements (copper, iron, lead...

Land surface reflectance is a basic physical parameter in many quantitative remote sensing models. However, the existing reflectance conversion techniques for drone-based (or UAV-based) remote sensing need further improvement and optimization due to...

Excessive (carbon dioxide) CO₂ emissions are a primary factor contributing to climate change. As one of the crucial technologies for alleviating CO₂ emissions, carbon capture and utilization (CCU) technology has attracted considerable global attentio...

Vanadium–titanium magnetite is a strategically important resource for iron, vanadium, and titanium production, yet its utilization in conventional blast furnace–basic oxygen furnace routes is limited by the dilution of titanium into low-v...

Weed management is a persistent challenge in Southeast Asian rice production, particularly in direct-seeded rice (DSR), due to the diversity of weed species and variable field and environmental conditions that can compromise weed control, necessitati...