Skip to Content

84 Results Found

  • Article
  • Open Access
3,016 Views
21 Pages

Large Transfer of Nitrogen, Silicon and Titanium through Various Thin Mo–Ti/Si and Ti–Mo/Si Bilayer Films Processed in Expanding Microwave Plasma: Formation of Nitrides and Silicides

  • Isabelle Jauberteau,
  • Richard Mayet,
  • Julie Cornette,
  • Pierre Carles and ,
  • Denis Mangin,
  • Annie Bessaudou,
  • Jean Louis Jauberteau and
  • Armand Passelergue
  • + 3 authors+ 0 author

18 October 2023

Silicides and nitrides of transition metals are expected to play a great role in various applications. They can be both considered as metals and ceramics. Their low resistivity and high melting point make them especially promising for super capacitor...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
21 Citations
11,619 Views
14 Pages

Silicides and Nitrides Formation in Ti Films Coated on Si and Exposed to (Ar-N2-H2) Expanding Plasma

  • Isabelle Jauberteau,
  • Richard Mayet,
  • Julie Cornette,
  • Denis Mangin and ,
  • Annie Bessaudou,
  • Pierre Carles,
  • Jean Louis Jauberteau and
  • Armand Passelergue
  • + 3 authors+ 0 author

8 February 2017

The physical properties including the mechanical, optical and electrical properties of Ti nitrides and silicides are very attractive for many applications such as protective coatings, barriers of diffusion, interconnects and so on. The simultaneous f...

(This article belongs to the Special Issue Five Years of Coatings: Coatings Science and Technology for the 21st Century)
  • Article
  • Open Access
4 Citations
3,450 Views
16 Pages

Interface Design in Lightweight SiC/TiSi2 Composites Fabricated by Reactive Infiltration Process: Interaction Phenomena between Liquid Si-Rich Si-Ti Alloys and Glassy Carbon

  • Donatella Giuranno,
  • Sofia Gambaro,
  • Grzegorz Bruzda,
  • Rafal Nowak and ,
  • Wojciech Polkowski,
  • Natalia Sobczak,
  • Simona Delsante and
  • Rada Novakovic
  • + 3 authors+ 0 author

4 July 2021

To properly design and optimize liquid-assisted processes, such as reactive infiltration for fabricating lightweight and corrosion resistant SiC/TiSi2 composites, the extensive knowledge about the interfacial phenomena taking place when liquid Si-ric...

(This article belongs to the Special Issue Interfacial and Transport Phenomena between Liquid Metal and Solid Structural Materials)
  • Article
  • Open Access
6 Citations
2,286 Views
17 Pages

Effects of Thermal Exposure Temperature on Room-Temperature Tensile Properties of Ti65 Alloy

  • Yuan-Chen Wang,
  • Jian-Yang Liu,
  • Jian-Rong Liu,
  • Wen-Yuan Li and ,
  • Bin Zhang and
  • Guang-Ping Zhang
  • + 1 author+ 0 author

9 September 2024

As a critical material for high-temperature components of aero-engines, the mechanical properties of Ti65 alloy, subjected to high-temperature and long-term thermal exposure, directly affect its service safety. The room-temperature tensile properties...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
1 Citations
5,026 Views
16 Pages

Expanding Plasma Process for Nitriding Mo–Ti Bilayer Thin Films

  • Isabelle Jauberteau,
  • Richard Mayet,
  • Julie Cornette,
  • Pierre Carles and ,
  • Denis Mangin,
  • Annie Bessaudou,
  • Jean Louis Jauberteau and
  • Armand Passelergue
  • + 3 authors+ 0 author

5 February 2019

Owing to the reducing effect of NHx radicals and H species produced in (Ar-N2-H2) expanding plasma, chemical reactions are promoted in thin metal films in contrast with other plasma treatments where the impinging energetic ions play the main role. Mu...

(This article belongs to the Collection Surface and Interface Science and Engineering for the Society of the Future)
  • Article
  • Open Access
44 Citations
4,830 Views
24 Pages

1 September 2018

In Nb-silicide based alloys Al, Cr, Hf, and Ti additions are crucial for achieving balance of properties. It is not known how the simultaneous addition of Hf with Al and Ti, or Hf with Al, Cr, and Ti affects macrosegregation, and how the alloying aff...

  • Article
  • Open Access
19 Citations
4,071 Views
11 Pages

14 August 2020

In this paper, the Si-20Cr-20Fe coating was prepared on MoNbTaTiW RHEA by a fused slurry method. The microstructural evolution and compositions of the silicide coating under high-temperature oxidation environment were studied. The results show that t...

  • Article
  • Open Access
10 Citations
4,482 Views
33 Pages

2 April 2019

An Nb-silicide based alloy will require some kind of coating system. Alumina and/or SiO2 forming alloys that are chemically compatible with the substrate could be components of such systems. In this work, the microstructures, and isothermal oxidation...

  • Article
  • Open Access
17 Citations
3,270 Views
37 Pages

13 October 2020

We studied the microstructures and isothermal oxidation of the Nb-silicide-based alloys Nb-11.5Ti-18Si-5Mo-2W-4.9Sn-4.6Ge-4.5Cr-4.7Al-1Hf (JZ4) and Nb-21Ti-18Si-6.7Mo-1.2W-4.4Sn-4.2Ge-4Cr-3.7Al-0.8Hf (JZ5), calculated their average creep rate for the...

  • Article
  • Open Access
23 Citations
3,836 Views
27 Pages

10 April 2020

In this paper two Nb-silicide-based alloys with nominal compositions (at.%) Nb-12Ti-18Si-6Ta-2.5W-1Hf-2Sn-2Ge (JZ1) and Nb-12Ti-18Si-6Ta-2.5W-1Hf-5Sn-5Ge (JZ2) were studied. The alloys were designed using the alloy design methodology NICE to meet spe...

  • Article
  • Open Access
26 Citations
3,278 Views
23 Pages

25 September 2019

In this paper, we report research about the isothermal oxidation in air at 800 and 1200 °C for 100 h of the as-cast alloys (at.%) Nb-18Si-5Ge (ZF1), Nb-18Si-10Ge (ZF2), Nb-24Ti-18Si-5Ge (ZF3), Nb-24Ti-18Si-5Cr (ZF4), Nb-24Ti-18Si-5Al (ZF5), Nb-24...

  • Feature Paper
  • Article
  • Open Access
15 Citations
3,717 Views
34 Pages

20 November 2021

The microstructure, isothermal oxidation, and hardness of the Nb-23Ti-5Si-5Al-5Hf-5V-2Cr-2Sn alloy and the hardness and Young’s moduli of elasticity of its Nbss and Nb5Si3 were studied. The alloy was selected using the niobium intermetallic com...

(This article belongs to the Special Issue Advanced Refractory Alloys)
  • Article
  • Open Access
26 Citations
4,413 Views
30 Pages

5 February 2020

The research presented in this paper aspired to understand how the simultaneous addition of Ge and Sn in an Hf-free Nb-silicide-based alloy affected its oxidation resistance. Results are presented for the Nb-24Ti-18Si-5Al-5Cr-5Ge-5Sn alloy (at.%) whi...

  • Article
  • Open Access
24 Citations
3,657 Views
37 Pages

3 December 2018

The paper presents the results of an experimental study of large (≈0.6 kg) arc melted buttons of four Ti free Nb-silicide based alloys with Sn addition with nominal compositions (at.%) Nb-18Si-5Hf-5Sn (EZ1), Nb-18Si-5Al-5Sn (EZ7), Nb-18Si-5Cr-5...

  • Article
  • Open Access
9 Citations
3,161 Views
66 Pages

30 June 2022

In this paper, we present a systematic study of the as-cast and heat-treated microstructures of three refractory metal intermetallic composites based on Nb (i.e., RM(Nb)ICs), namely the alloys EZ2, EZ5, and EZ6, and one RM(Nb)IC/RCCA (refractory comp...

(This article belongs to the Special Issue Feature Papers in "Metals and Alloys" Section)
  • Article
  • Open Access
27 Citations
4,863 Views
25 Pages

7 June 2018

The Nb-silicide-based alloy of near eutectic composition (at.%) Nb-21.1Si-8.3Ti-5.4Mo-4W-0.7Hf (alloy CM1) was studied in the cast and heat-treated (1500 °C/100 h) conditions. The alloy was produced in the form of buttons and bars using three dif...

  • Article
  • Open Access
23 Citations
4,754 Views
26 Pages

5 March 2019

Coating system(s) will be required for Nb-silicide based alloys. Alumina forming alloys that are chemically compatible with the Nb-silicide based alloy substrate could be components of such systems. The intermetallic alloys Nb1.45Si2.7Ti2.25Al3.25Hf0...

  • Feature Paper
  • Article
  • Open Access
7 Citations
3,609 Views
15 Pages

Nitrogen under Super-Reducing Conditions: Ti Oxynitride Melts in Xenolithic Corundum Aggregates from Mt Carmel (N. Israel)

  • William L. Griffin,
  • Sarah E. M. Gain,
  • Martin Saunders,
  • Olivier Alard and ,
  • Jeremy Shaw,
  • Vered Toledo and
  • Suzanne Y. O’Reilly
  • + 2 authors+ 0 author

18 July 2021

Titanium oxynitrides (Ti(N,O,C)) are abundant in xenolithic corundum aggregates in pyroclastic ejecta of Cretaceous volcanoes on Mount Carmel, northern Israel. Petrographic observations indicate that most of these nitrides existed as melts, immiscibl...

(This article belongs to the Special Issue 10th Anniversary of Minerals: Frontiers of Mineral Science)
  • Brief Report
  • Open Access
2 Citations
4,427 Views
10 Pages

15 February 2025

This study investigates the impact of cross-bridge Kelvin resistor (CBKR) layout designs on specific contact resistivity (ρc) measurements between TiSi2 and n+ Si. The theoretical ρc is calculated as a function of silicon doping concentration...

  • Article
  • Open Access
23 Citations
7,835 Views
12 Pages

Flexible Powder Production for Additive Manufacturing of Refractory Metal-Based Alloys

  • Frauke Hinrichs,
  • Alexander Kauffmann,
  • Daniel Schliephake,
  • Sascha Seils and ,
  • Susanne Obert,
  • Karin Ratschbacher,
  • Melissa Allen,
  • Astrid Pundt and
  • Martin Heilmaier
  • + 4 authors+ 0 author

28 October 2021

The quality and properties of metal powders are essential for powder metallurgical (PM) processes in general and for additive manufacturing (AM) processing routes in particular. Thus, a variety of atomization technologies were established meeting the...

  • Review
  • Open Access
1,252 Views
25 Pages

1 April 2026

This article presents a review of current trends in the development of protective coatings for TiAl alloys. These materials have been indicated as potential replacements for nickel-based alloys for several decades; however, many problems related to t...

(This article belongs to the Special Issue Protective Coatings for Metallic Materials)
  • Article
  • Open Access
380 Views
15 Pages

TiSi2 Phase Formation in Magnetron-Sputtered Ti Films on Silicon During Rapid Thermal Annealing

  • Symaiyl Keiinbay,
  • Kair Kh. Nussupov,
  • Nurzhan B. Beisenkhanov and
  • Alex A. Volinsky

6 October 2026

Titanium thin films were deposited on crystalline silicon substrates by DC magnetron sputtering and annealed by rapid thermal processing under vacuum and nitrogen environments. X-ray diffraction, atomic force microscopy, and four-point probe measurem...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
4 Citations
3,969 Views
10 Pages

Preparation of TiSi2 Powders with Enhanced Lithium-Ion Storage via Chemical Oven Self-Propagating High-Temperature Synthesis

  • Jianguang Xu,
  • Menglan Jin,
  • Xinlu Shi,
  • Qiuyu Li and ,
  • Chengqiang Gan and
  • Wei Yao
  • + 1 author+ 0 author

2 September 2021

Although silicon has highest specific capacity as anode for lithium-ion battery (LIB), its large volume change during the charge/discharge process becomes a great inevitable hindrance before commercialization. Metal silicides may be an alternative ch...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
8 Citations
10,208 Views
7 Pages

7 November 2017

This study demonstrated an ultra thin poly-Si junctionless nanosheet field-effect transistor (JL NS-FET) with nickel silicide contact. For the nickel silicide film, two-step annealing and a Ti capping layer were adopted to form an ultra thin uniform...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
54 Citations
5,796 Views
19 Pages

4 January 2018

The alloying of Nb5Si3 modifies its properties. Actual compositions of (Nb,TM)5X3 silicides in developmental alloys, where X = Al + B + Ge + Si + Sn and TM is a transition and/or refractory metal, were used to calculate the composition weighted diffe...

  • Article
  • Open Access
12 Citations
3,118 Views
8 Pages

Effect of Irradiation with Si+ Ions on Phase Transformations in Ti–Al System during Thermal Annealing

  • Zhuldyz Sagdoldina,
  • Bauyrzhan Rakhadilov,
  • Sherzod Kurbanbekov,
  • Rauan Kozhanova and
  • Aidar Kengesbekov

10 February 2021

The article deals with the effect of irradiation with Si+ ions on phase transformations in the Ti–Al system during thermal annealing. An aluminum film with a thickness of 500 nm was deposited on VT1-00 titanium samples by magnetron sputtering, follow...

  • Communication
  • Open Access
974 Views
13 Pages

Structural and Mechanical Property Evolution During the Processing of Semi-Finished Products from Ti-xNb-4Zi-1Si Biomedical Alloys (x = 12 and 18 wt.%)

  • Olha Shevchenko,
  • Mykola Kuzmenko,
  • Sergiy Firstov,
  • Dmytro Verbylo and ,
  • Kateryna Valuiska,
  • Yana Mourdjeva,
  • Nikolay Doynov and
  • Vanya Dyakova
  • + 3 authors+ 0 author

Biomedical Ti–Nb–Zr–Si alloys containing 12 and 18 wt.% Nb were fabricated by electron beam melting and subjected to thermomechanical processing, including forging, cross-helical rolling, and subsequent cooling or quenching. The eff...

  • Article
  • Open Access
9 Citations
4,250 Views
13 Pages

Evolution on the Microstructure and Mechanical Properties of a New Multicomponent Near-Alpha Titanium Alloy after Rolling and Heat Treatments

  • Jingyu Han,
  • Zhilei Xiang,
  • Xiaozhao Ma,
  • Zongyi Zhou and ,
  • Jingcun Huang,
  • Jihao Li,
  • Andong Wang,
  • Gaoliang Shen and
  • Ziyong Chen
  • + 4 authors+ 0 author

4 July 2023

Near-alpha titanium alloys are widely used in aeroengine blades due to their excellent specific strength and mechanical properties. The mechanical properties of near-α titanium alloys are closely related to the evolution of the microstructure a...

(This article belongs to the Special Issue Titanium Alloys: Microstructure, Mechanical Properties and Biomedical Applications)
  • Article
  • Open Access
18 Citations
6,368 Views
8 Pages

27 July 2017

The microstructural evolution and tensile properties of Ti-3Al-8V-6Cr-4Mo-4Zr titanium alloys with various Si contents were investigated. The results revealed that the addition of trace Si and the presence of Zr induced the formation of (TiZr)6Si3 si...

(This article belongs to the Special Issue Titanium Alloys 2017)
  • Article
  • Open Access
11 Citations
3,538 Views
31 Pages

26 May 2023

Refractory metal (RM) M5Si3 silicides are desirable intermetallics in metallic ultra-high temperature materials (UHTMs), owing to their creep properties and high Si content that benefits oxidation resistance. Of particular interest is the alloyed Nb5...

  • Article
  • Open Access
34 Citations
5,057 Views
23 Pages

11 April 2018

In Nb-silicide based alloys, eutectics can form that contain the Nbss and Nb5Si3 phases. The Nb5Si3 can be rich or poor in Ti, the Nb can be substituted with other transition and refractory metals, and the Si can be substituted with simple metal and...

  • Article
  • Open Access
11 Citations
3,737 Views
12 Pages

Microstructural Evolution and Subsequent Mechanical Properties of Ti65 Titanium Alloy during Long-Term Thermal Exposure

  • Juan Li,
  • Wentao Jiang,
  • Chunlin Xia,
  • Yuting Deng and ,
  • Yue Gao and
  • Changyi Yang
  • + 1 author+ 0 author

25 July 2024

The microstructural stability and property evolution of high-temperature titanium alloys under long-term high-temperature conditions has been a critical scientific issue in the field of advanced titanium alloys. In this work, we systematically invest...

(This article belongs to the Special Issue Design, Phase Transformation and Mechanical Properties of Titanium Alloy)
  • Article
  • Open Access
5 Citations
2,462 Views
15 Pages

14 August 2023

Si-Co diffusion coatings were prepared on a Y-modified TiAl-Nb alloy using the pack cementation process. The structures of the coatings prepared at different temperatures (1050, 1080, and 1120 °C) and pack Co contents (5, 10, and 20 wt.%) were co...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
30 Citations
4,716 Views
33 Pages

10 January 2019

Nb–silicide based alloy will require some kind of coating system. Alumina forming alloys that are chemically compatible with the Nb–silicide based alloy substrate could be components of such systems. The intermetallic alloys Nb1.7Si2.4Ti2...

  • Article
  • Open Access
10 Citations
3,529 Views
12 Pages

Effect of C Addition on as-Cast Microstructures of High Nb Containing TiAl Alloys

  • Jinhu Liu,
  • Fuqiang Zhang,
  • Hai Nan,
  • Xin Feng and
  • Xianfei Ding

7 November 2019

Two high Nb-containing TiAl alloys, Ti46.6Al7.5Nb0.5Si0.2B (Alloy A) and Ti46.1Al7.4Nb5C0.5Si0.2B (Alloy B), were prepared by graphite mold casting. As-cast microstructures of the two alloys were characterized to clarify the effect of carbon addition...

  • Review
  • Open Access
20 Citations
4,762 Views
10 Pages

17 June 2019

Si-based thermoelectric materials have attracted attention in recent decades with their advantages of low toxicity, low production costs, and high stability. Here, we report recent achievements on the synthesis and characterization of Si-based thermo...

(This article belongs to the Special Issue Selected Papers from ISCTA 2018)
  • Article
  • Open Access
1 Citations
1,122 Views
20 Pages

Laser Remelting of Biocompatible Ti-Based Glass-Forming Alloys: Microstructure, Mechanical Properties, and Cytotoxicity

  • Aleksandra Małachowska,
  • Wiktoria Drej,
  • Agnieszka Rusak,
  • Tomasz Kozieł and ,
  • Denis Pikulski and
  • Wojciech Stopyra
  • + 1 author+ 0 author

18 December 2025

Titanium-based bulk metallic glasses (BMGs) offer high strength, lower stiffness than Ti-6Al-4V, and superior corrosion resistance, but conventional Ti glass-forming systems often contain toxic Ni, Be, or Cu. This work investigates five novel Ti-base...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
8 Citations
3,137 Views
15 Pages

Formation Mechanism of Ti–Si Multi-Layer Coatings on the Surface of Ti–6Al–4V Alloy

  • Yu Zhao,
  • Guodong Liang,
  • Xinjian Zhang,
  • Xudong Zhao and ,
  • Wensheng Li,
  • Uladzimir Seniuts,
  • Zhornik Viktor and
  • Bo Cheng
  • + 3 authors+ 0 author

9 April 2024

Titanium alloys are widely used in aerospace applications due to their high specific strength and exceptional corrosion resistance. In this study, a silicide coating with a multi-layer structure was designed and prepared via a pack cementation proces...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
7 Citations
3,334 Views
18 Pages

3 June 2019

Nb-silicide based alloys are new ultra-high temperature materials that could replace Ni-based superalloys. Environmentally resistant coating system (s) with αAl2O3 or SiO2 forming bond coat alloys that are chemically compatible with the Nb-sili...

  • Review
  • Open Access
43 Citations
7,015 Views
21 Pages

Development of TiAl–Si Alloys—A Review

  • Anna Knaislová,
  • Pavel Novák,
  • Marcello Cabibbo,
  • Lucyna Jaworska and
  • Dalibor Vojtěch

22 February 2021

This paper describes the effect of silicon on the manufacturing process, structure, phase composition, and selected properties of titanium aluminide alloys. The experimental generation of TiAl–Si alloys is composed of titanium aluminide (TiAl, Ti3Al...

(This article belongs to the Special Issue Materials under Extreme Conditions: Technologies for CRMs Reduction, Substitution and Recovery)
  • Article
  • Open Access
31 Citations
6,306 Views
8 Pages

High-Pressure Spark Plasma Sintering (HP SPS): A Promising and Reliable Method for Preparing Ti–Al–Si Alloys

  • Anna Knaislová,
  • Pavel Novák,
  • Sławomir Cygan,
  • Lucyna Jaworska and
  • Marcello Cabibbo

27 April 2017

Ti–Al–Si alloys are prospective material for high-temperature applications. Due to low density, good mechanical properties, and oxidation resistance, these intermetallic alloys can be used in the aerospace and automobile industries. Ti–Al–Si alloys w...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
4 Citations
1,439 Views
20 Pages

Phase Evolution During High-Energy Ball Milling and Annealing of Ti-Doped Mo-V-Si-B Alloys

  • Dennis Zang,
  • Julia Becker,
  • Ulf Betke,
  • Georg Hasemann and ,
  • Kateryna Khanchych,
  • Bronislava Gorr and
  • Manja Krüger
  • + 2 authors+ 0 author

26 May 2025

Refractory metal-based Mo-Si-B alloys have long been considered the most promising candidates for replacing nickel-based superalloys in the aerospace and energy sector due to their outstanding mechanical properties and good oxidation of the Mo-silici...

(This article belongs to the Special Issue Alloy Strengthening Mechanisms, Microstructure Control, and Performance Optimization)
  • Article
  • Open Access
3 Citations
3,508 Views
16 Pages

Gas-Atomized Nickel Silicide Powders Alloyed with Molybdenum, Cobalt, Titanium, Boron, and Vanadium for Additive Manufacturing

  • Mohammad Ibrahim,
  • Qiang Du,
  • Even Wilberg Hovig,
  • Geir Grasmo and ,
  • Christopher Hulme and
  • Ragnhild E. Aune
  • + 1 author+ 0 author

13 September 2023

Nickel silicides (NiSi) are renowned for their ability to withstand high temperatures and resist oxidation and corrosion in challenging environments. As a result, these alloys have garnered interest for potential applications in turbine blades and un...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
8 Citations
3,457 Views
12 Pages

Interaction of Oxygen with the Stable Ti5Si3 Surface

  • Lora S. Chumakova,
  • Alexander V. Bakulin,
  • Stephen Hocker,
  • Siegfried Schmauder and
  • Svetlana E. Kulkova

14 March 2022

The atomic structure and surface energies of several low-index surfaces (0001), (11¯00) and (112¯0) of Ti5Si3 in dependence on their termination were calculated by the projector augmented-wave method within the density functional theory. It...

  • Article
  • Open Access
7 Citations
3,128 Views
10 Pages

Ab Initio Study of Ternary W5Si3 Type TM5Sn2X Compounds (TM = Nb, Ti and X = Al, Si)

  • Ioannis Papadimitriou,
  • Claire Utton and
  • Panos Tsakiropoulos

1 October 2019

The adhesion of the scale formed on Nb-silicide based alloys at 1473 K improves when Al and Sn are in synergy with Si and Ti. This improvement is observed when there is segregation of Sn in the microstructure below the alloy/scale interface and a lay...

  • Article
  • Open Access
10 Citations
3,871 Views
39 Pages

10 December 2021

We studied the effect of the addition of Hf, Sn, or Ta on the density, macrosegregation, microstructure, hardness and oxidation of three refractory metal intermetallic composites based on Nb (RM(Nb)ICs) that were also complex concentrated alloys (i.e...

(This article belongs to the Special Issue Feature Papers in "Metals and Alloys" Section)
  • Article
  • Open Access
11 Citations
3,029 Views
44 Pages

15 October 2021

This paper is about metallic ultra-high temperature materials, in particular, refractory metal intermetallic composites based on Nb, i.e., RM(Nb)ICs, with the addition of boron, which are compared with refractory metal high entropy alloys (RHEAs) or...

  • Article
  • Open Access
  • Best Paper Award
35 Citations
5,379 Views
11 Pages

15 March 2022

Low-density materials show promising prospects for industrial application in engineering, and have remained a research hotspot. The ingots of Al15Zr40Ti28Nb12Cr5, Al15Zr40Ti28Nb12Mo5 and Al15Zr40Ti28Nb12Si5 high-entropy alloys were prepared using an...

(This article belongs to the Special Issue Amorphous and High-Entropy Alloy Coatings)
  • Article
  • Open Access
4 Citations
3,664 Views
11 Pages

Microstructure and Properties of TiB2 Composites Produced by Spark Plasma Sintering with the Addition of Ti5Si3

  • Agnieszka Twardowska,
  • Marcin Podsiadło,
  • Iwona Sulima,
  • Krzysztof Bryła and
  • Paweł Hyjek

8 July 2021

Titanium diboride (TiB2) is a hard, refractory material, attractive for a number of applications, including wear-resistant machine parts and tools, but it is difficult to densify. The spark plasma sintering (SPS) method allows producing TiB2-based co...

(This article belongs to the Special Issue Novel High-Temperature Materials: Preparation, Characterization, and Applications)
  • Article
  • Open Access
19 Citations
7,499 Views
17 Pages

Characterizing the Soldering Alloy Type In–Ag–Ti and the Study of Direct Soldering of SiC Ceramics and Copper

  • Roman Koleňák,
  • Igor Kostolný,
  • Jaromír Drápala,
  • Martin Sahul and
  • Ján Urminský

16 April 2018

The aim of the research was to characterize the soldering alloy In–Ag–Ti type, and to study the direct soldering of SiC ceramics and copper. The In10Ag4Ti solder has a broad melting interval, which mainly depends on its silver content. The liquid poi...

(This article belongs to the Special Issue Science, Characterization and Technology of Joining and Welding)

of 2