Skip to Content

193 Results Found

  • Article
  • Open Access
2 Citations
5,004 Views
8 Pages

An Inverted Magnetron Operating in HiPIMS Mode

  • Phitsanu Poolcharuansin,
  • Artit Chingsungnoen,
  • Nitisak Pasaja and
  • James W Bradley

27 November 2018

An ionized physical vapor deposition technique for thin ferromagnetic films is proposed. The technique is based on high power impulse magnetron sputtering (HiPIMS) with positive discharge polarity. A gapped-target was employed as the cathode of the m...

(This article belongs to the Special Issue Latest Developments in Pulsed Low-Temperature Plasmas)
  • Communication
  • Open Access
6 Citations
4,827 Views
8 Pages

21 January 2023

Gold is the preferred material for conductive structures in neural implants. The hitherto employed process applies adhesive layers to avoid delamination of gold structures from a polymeric substrate. The possibility to deposit gold without the use of...

  • Feature Paper
  • Article
  • Open Access
1 Citations
4,489 Views
13 Pages

A Study of HiPIMS Process Characteristics in SiO2 Deposition

  • Marcell Gajdics,
  • Dániel Olasz,
  • György Sáfrán and
  • Miklós Serényi

2 September 2025

In this study, SiO2 thin films were sputtered from a Si target using reactive HiPIMS (high-power impulse magnetron sputtering) in an argon–oxygen process gas. In order to understand the behavior of HiPIMS, the deposition process was studied by...

(This article belongs to the Section Thin Films)
  • Article
  • Open Access
7 Citations
3,245 Views
13 Pages

Influence of HiPIMS Pulse Widths on the Structure and Properties of Copper Films

  • Xincheng Liu,
  • Heda Bai,
  • Yongjie Ren,
  • Jin Li and
  • Xiangli Liu

15 May 2024

High-power pulse magnetron sputtering is a new type of magnetron sputtering technology that has advantages such as high peak power density and a high ionization rate compared to DC magnetron sputtering. In this paper, we report the effects of differe...

(This article belongs to the Special Issue Advances in Thin Films Materials: Properties, Characterization, Physical Vapor Deposition and Application)
  • Article
  • Open Access
8 Citations
5,993 Views
10 Pages

Ta–Zr–N Thin Films Fabricated through HIPIMS/RFMS Co-Sputtering

  • Li-Chun Chang,
  • Ching-Yen Chang and
  • Ya-Wen You

4 November 2017

Ta–Zr–N thin films were fabricated through co-deposition of radio-frequency magnetron sputtering and high-power impulse magnetron sputtering (HIPIMS/RFMS co-sputtering). The oxidation resistance of the fabricated films was evaluated by annealing the...

(This article belongs to the Special Issue Thin Film Deposition and Characterization Techniques)
  • Feature Paper
  • Article
  • Open Access
4 Citations
2,953 Views
9 Pages

Deposition of 3YSZ-TiC PVD Coatings with High-Power Impulse Magnetron Sputtering (HiPIMS)

  • Bastian Gaedike,
  • Svenja Guth,
  • Frank Kern,
  • Andreas Killinger and
  • Rainer Gadow

19 March 2021

Optimized coating adhesion and strength are the advantages of high-power impulse magnetron sputtering (HiPIMS) as an innovative physical vapor deposition (PVD) process. When depositing electrically non-conductive oxide ceramics as coatings with HiPIM...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
12 Citations
4,119 Views
9 Pages

1 March 2018

To simulate flood processes at the basin level, the GPU-based High-Performance Integrated Hydrodynamic Modelling System (HiPIMS) is gaining interest as computational capability increases. However, the difficulty of coping with rainfall input to HiPIM...

  • Feature Paper
  • Article
  • Open Access
15 Citations
7,119 Views
20 Pages

Improved Adhesion of the DLC Coating Using HiPIMS with Positive Pulses and Plasma Immersion Pretreatment

  • Iñigo Gómez,
  • Adrián Claver,
  • José Antonio Santiago,
  • Iván Fernandez and ,
  • Jose Fernandez Palacio,
  • Cristina Diaz,
  • Stephan Mändl and
  • Jose Antonio Garcia
  • + 3 authors+ 0 author

5 September 2021

Diamond-like carbon (DLC) coatings are used due to their extraordinary tribomechanical properties, great hardness, high elastic modulus, high wear resistance, low friction coefficient and chemical inertness, which provide them with biocompatibility....

(This article belongs to the Special Issue Design, Characterization and Applications of Functional Coatings)
  • Article
  • Open Access
5 Citations
5,349 Views
19 Pages

HIPIMS/UBM PVD Coating Equipment Designed to Coat Universal Sized Broaches

  • Wolf-Dieter Münz,
  • Roman Klink,
  • Dejan Aleksic and
  • Mansour Mazaheri

23 February 2022

This paper describes a physical vapor deposition (PVD) coating equipment, as well as the according deposition parameters suitable to provide hard nitride coatings on broaches up to a length of 2.2 m. The octagonal-shaped vacuum chamber reached a heig...

(This article belongs to the Special Issue Magnetron Sputtering Deposition of Thin Films)
  • Feature Paper
  • Article
  • Open Access
65 Citations
11,980 Views
21 Pages

The Effect of Magnetic Field Strength and Geometry on the Deposition Rate and Ionized Flux Fraction in the HiPIMS Discharge

  • Hamidreza Hajihoseini,
  • Martin Čada,
  • Zdenek Hubička,
  • Selen Ünaldi and ,
  • Michael A. Raadu,
  • Nils Brenning,
  • Jon Tomas Gudmundsson and
  • Daniel Lundin
  • + 3 authors+ 0 author

13 May 2019

We explored the effect of magnetic field strength | B | and geometry (degree of balancing) on the deposition rate and ionized flux fraction F flux in dc magnetron sputtering (dcMS) and high power impulse magnetron sputtering (HiPIMS)...

(This article belongs to the Special Issue Latest Developments in Pulsed Low-Temperature Plasmas)
  • Article
  • Open Access
15 Citations
5,688 Views
12 Pages

HiPIMS and DC Magnetron Sputter-Coated Silver Films for High-Temperature Durable Reflectors

  • Sophie Gledhill,
  • Kevin Steyer,
  • Charlotte Weiss and
  • Christina Hildebrandt

20 September 2019

High-temperature durable mirrors based on a protected silver sputter coating are attractive for secondary reflector applications in concentrated solar thermal power plants. In this paper, silver films are deposited by high-power impulse magnetron spu...

(This article belongs to the Special Issue Surfaces and Interfaces for Renewable Energy)
  • Article
  • Open Access
2 Citations
1,418 Views
20 Pages

The Effect of HiPIMS Pulse Conditions on the Microstructural, Mechanical, and Tribological Properties of TiB2 Coatings on Steel Substrates

  • Daniel Kottfer,
  • Karol Kyzioł,
  • Mária Kaňuchová,
  • Marta Kianicová and ,
  • Michal Žitňan,
  • Ewa Durda,
  • Marianna Trebuňová,
  • Dávid Medveď and
  • Patrik Kľučiar
  • + 4 authors+ 0 author

13 October 2025

This study examines the impact of varying pulse conditions on the properties of titanium diboride (TiB2) coatings deposited by high-power impulse magnetron sputtering (HiPIMS). The coatings were prepared on steel substrates using an industrial-scale...

(This article belongs to the Special Issue Advanced Functional Coatings for Surface Engineering: Deposition, Properties and Applications)
  • Article
  • Open Access
1,247 Views
18 Pages

26 November 2025

In this study, we investigate the role of film thickness in modulating the properties of Cu films deposited on BaTiO3 ceramic substrates using direct current magnetron sputtering (DCMS) and high-power pulsed magnetron sputtering (HiPIMS). While HiPIM...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
4 Citations
2,800 Views
16 Pages

Studies of Electrical Parameters and Thermal Stability of HiPIMS Hafnium Oxynitride (HfOxNy) Thin Films

  • Mirosław Puźniak,
  • Wojciech Gajewski,
  • Aleksandra Seweryn,
  • Marcin T. Klepka and ,
  • Bartłomiej S. Witkowski,
  • Marek Godlewski and
  • Robert Mroczyński
  • + 2 authors+ 0 author

22 March 2023

This work demonstrated the optimization of HiPIMS reactive magnetron sputtering of hafnium oxynitride (HfOxNy) thin films. During the optimization procedure, employing Taguchi orthogonal tables, the parameters of examined dielectric films were explor...

(This article belongs to the Special Issue Trends in Electronic and Optoelectronic Materials)
  • Feature Paper
  • Article
  • Open Access
7 Citations
2,597 Views
8 Pages

20 January 2025

We used high-power impulse magnetron sputtering (HiPIMS) to deposit tungsten carbide films for superior wear protection in abrasive environments. In order to sample different W-to-C ratios more efficiently, a combinatorial approach was chosen. A sing...

  • Article
  • Open Access
17 Citations
4,610 Views
20 Pages

Surface Modification of 304L Stainless Steel and Interface Engineering by HiPIMS Pre-Treatment

  • Angélique Chabanon,
  • Alexandre Michau,
  • Michel Léon Schlegel,
  • Deniz C. Gündüz and ,
  • Beatriz Puga,
  • Frédéric Miserque,
  • Frédéric Schuster,
  • Hicham Maskrot,
  • Cristelle Pareige and
  • Fanny Balbaud-Célérier
  • + 11 authors+ 6 authors

A clean and defect-free substrate/coating interface is required to guarantee good adhesion of coatings under service conditions. For this purpose, an etching pre-treatment using High-Power Impulse Magnetron Sputtering (HiPIMS) was performed to modify...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
28 Citations
4,851 Views
22 Pages

9 February 2021

The high-power impulse magnetron sputtering (HiPIMS) technique is widely used owing to the high degree of ionization and the ability to synthesize high-quality coatings with a dense structure and smooth morphology. However, limited efforts have been...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
13 Citations
3,168 Views
25 Pages

A Comparative Study on Al0.6Ti0.4N Coatings Deposited by Cathodic Arc and HiPIMS in End Milling of Stainless Steel 316L

  • Victor Saciotto,
  • Qianxi He,
  • Monica C. Guimaraes,
  • Jose M. DePaiva and ,
  • Joern Kohlscheen,
  • Luis C. Fontana and
  • Stephen C. Veldhuis
  • + 2 authors+ 0 author

28 June 2024

The machining of austenitic stainless steel alloys is usually characterized by high levels of adhesion and built-up edge; therefore, improving tribological conditions is fundamental to obtaining higher tool life and better surface finish. In this wor...

(This article belongs to the Special Issue Oxidation, Wear, Corrosion Behaviors and Activated Bonding Properties of Coatings Deposited on Metals)
  • Article
  • Open Access
5 Citations
3,196 Views
12 Pages

Transparent Silver Coatings with Copper Addition for Improved Conductivity by Combined DCMS and HiPIMS Process

  • Catalin Vitelaru,
  • Anca C. Parau,
  • Mihaela Dinu,
  • Iulian Pana and ,
  • Lidia R. Constantin,
  • Arcadie Sobetkii and
  • Iulian Iordache
  • + 2 authors+ 0 author

27 July 2022

The demand for transparent conductive coatings has increased over recent years, leading to the development of various technical solutions. One of the approaches is to use metallic coatings very close to their coalescence thickness, so that a good com...

  • Article
  • Open Access
38 Citations
9,214 Views
11 Pages

Ultra-Short Pulse HiPIMS: A Strategy to Suppress Arcing during Reactive Deposition of SiO2 Thin Films with Enhanced Mechanical and Optical Properties

  • Vasile Tiron,
  • Ioana-Laura Velicu,
  • Teodora Matei,
  • Daniel Cristea and ,
  • Luis Cunha and
  • George Stoian
  • + 1 author+ 0 author

30 June 2020

In this contribution, based on the detailed understanding of the processes’ characteristics during reactive high-power impulse magnetron sputtering (HiPIMS), we demonstrated the deposition of silicon oxide (SiO2) thin films with improved optica...

(This article belongs to the Special Issue Advances in Hard Coatings: Production, Properties and Applications)
  • Article
  • Open Access
1 Citations
693 Views
18 Pages

17 April 2026

Hydrogen embrittlement (HE) represents a critical degradation mechanism in carbon steel components operating in hydrogen-rich environments, such as those encountered in clean energy and petrochemical applications. This study evaluates the hydrogen pe...

(This article belongs to the Special Issue Corrosion of Materials: Evaluation, Testing, Protection, and Failure Analysis, Third Edition)
  • Feature Paper
  • Article
  • Open Access
16 Citations
4,695 Views
13 Pages

A Strategy for Alleviating Micro Arcing during HiPIMS Deposition of DLC Coatings

  • Catalin Vitelaru,
  • Anca Constantina Parau,
  • Lidia Ruxandra Constantin,
  • Adrian Emil Kiss and ,
  • Alina Vladescu,
  • Arcadie Sobetkii and
  • Tomas Kubart
  • + 2 authors+ 0 author

26 February 2020

In this work, we investigate the use of high power impulse magnetron sputtering (HiPIMS) for the deposition of micrometer thick diamond like carbon (DLC) coatings on Si and steel substrates. The adhesion on both types of substrates is ensured with a...

(This article belongs to the Special Issue Advances in Diamond-Like Carbon (DLC) Films)
  • Article
  • Open Access
1,262 Views
21 Pages

X-band copper resonating cavities are key components of future pulsed GHz normal-conductive multi-TeV accelerators. High electric field gradients are required for emerging applications; however, as gradients increase, components’ lifetime decre...

  • Article
  • Open Access
15 Citations
4,810 Views
20 Pages

6 October 2022

High-power impulse magnetron-sputtering thick metal/carbon–nitride-doped metal-matrix multilayer nano-composite coating can be applied to cutting-tool holder components to improve cutting insert’s life. One of the challenges of such an ad...

(This article belongs to the Topic Materials and Surface Treatment Processes Used for Engineering Applications)
  • Article
  • Open Access
7 Citations
4,089 Views
11 Pages

Selective Metal Ion Irradiation Using Bipolar HIPIMS: A New Route to Tailor Film Nanostructure and the Resulting Mechanical Properties

  • Iván Fernández-Martínez,
  • José A. Santiago,
  • Álvaro Mendez,
  • Miguel Panizo-Laiz and ,
  • Pablo Diaz-Rodríguez,
  • Lucía Mendizábal,
  • Javier Díez-Sierra,
  • Cristina Zubizarreta,
  • Miguel A. Monclus and
  • Jon Molina-Aldareguia
  • + 5 authors+ 0 author

1 February 2022

This manuscript introduces and experimentally demonstrates a novel concept of selective metal ion irradiation by combining bipolar HIPIMS with conventional DC magnetron sputtering operation and simple DC biasing. The addition of the positive pulse to...

(This article belongs to the Special Issue Hard Coatings for Surface Engineering Solutions)
  • Article
  • Open Access
16 Citations
6,497 Views
20 Pages

Thermal Shock and Oxidation Behavior of HiPIMS TiAlN Coatings Grown on Ti-48Al-2Cr-2Nb Intermetallic Alloy

  • Claudio Badini,
  • Silvia M. Deambrosis,
  • Elisa Padovano,
  • Monica Fabrizio and ,
  • Oxana Ostrovskaya,
  • Enrico Miorin,
  • Giuseppe C. D’Amico,
  • Francesco Montagner,
  • Sara Biamino and
  • Valentina Zin
  • + 5 authors+ 0 author

25 November 2016

A High Power Impulse Magnetron Sputtering (HiPIMS) method for depositing TiAlN environmental barrier coatings on the surface of Ti-48Al-2Cr-2Nb alloy was developed in view of their exploitation in turbine engines. Three differently engineered TiAlN f...

  • Feature Paper
  • Article
  • Open Access
5 Citations
2,956 Views
12 Pages

Tailoring the Hybrid Magnetron Sputtering Process (HiPIMS and dcMS) to Manufacture Ceramic Multilayers: Powering Conditions, Target Materials, and Base Layers

  • Bruno César Noronha Marques de Castilho,
  • Felipe de Sousa Mazuco,
  • Alisson Mendes Rodrigues,
  • Pedro Renato Tavares Avila and ,
  • Raira Chefer Apolinario,
  • Philipp Daum,
  • Fabiana Pereira da Costa,
  • Romualdo Rodrigues Menezes,
  • Gelmires de Araújo Neves and
  • Haroldo Cavalcanti Pinto
  • + 6 authors+ 1 author

18 July 2022

The mechanical and wear behavior of CrN/CrAlN multilayers were improved by tailoring the experimental conditions of a hybrid magnetron sputtering process based on a high-power impulse (HiPIMS) and two direct current magnetron sputtering (dcMS) power...

  • Article
  • Open Access
24 Citations
3,516 Views
19 Pages

Wear Behavior and Machining Performance of TiAlSiN-Coated Tools Obtained by dc MS and HiPIMS: A Comparative Study

  • Vitor F. C. Sousa,
  • Francisco J. G. Silva,
  • Hernâni Lopes,
  • Rafaela C. B. Casais and ,
  • Andresa Baptista,
  • Gustavo Pinto and
  • Ricardo Alexandre
  • + 2 authors+ 0 author

7 September 2021

Duplex stainless steels are being used on applications that require high corrosion resistance and excellent mechanical properties, such as the naval and oil-gas exploration industry. The components employed in these industries are usually obtained by...

(This article belongs to the Special Issue Surface Processing of Steels: Materials, Techniques and Applications)
  • Article
  • Open Access
6 Citations
3,909 Views
21 Pages

Influences of Nitrogen Flow Rate on Microstructure, Mechanical and Tribological Properties of WCN Coatings Deposited by HiPIMS

  • Weifeng He,
  • Yuhui Yang,
  • Shuqi Huang,
  • Shuyu Fan and ,
  • Min Hu,
  • Yongchao Wang,
  • Wei Xu and
  • Lei Wang
  • + 3 authors+ 0 author

20 April 2021

Tungsten carbide (WC) and Tungsten carbonitride (WCN) coatings are deposited by reactive high-power impulse magnetron sputtering (HiPIMS) with various nitrogen gas flow rates. The characteristics of discharge current and plasma optical emission of Hi...

  • Article
  • Open Access
21 Citations
5,678 Views
15 Pages

A Comparative Study in the Tribological Behavior of DLC Coatings Deposited by HiPIMS Technology with Positive Pulses

  • Jose A. García,
  • Pedro J. Rivero,
  • Eneko Barba,
  • Ivan Fernández and ,
  • Jose A. Santiago,
  • Jose F. Palacio,
  • Gonzalo G. Fuente and
  • Rafael J. Rodríguez
  • + 3 authors+ 0 author

24 January 2020

During the last few decades, diamond-like carbon (DLC) coatings were widely used for tribological applications, being an effective tool for improving the performance and the useful life of different machining tools. Despite its excellent properties,...

  • Article
  • Open Access
4 Citations
3,106 Views
13 Pages

27 August 2023

The good mechanical properties of metal nitrides make them ideal surface coatings for cutting tools and mold components. Conventional TiN coatings have largely been replaced by AlTiN due to their superior mechanical properties and resistance to high...

  • Article
  • Open Access
8 Citations
2,735 Views
15 Pages

Tribological Properties of Hard TiB2 Thin Films Prepared at Low Temperatures Using HiPIMS

  • Jianjian Yu,
  • Ping Zhang,
  • Puyou Ying,
  • Changhong Lin and ,
  • Tao Yang,
  • Jianbo Wu,
  • Chen Li,
  • Min Huang and
  • Vladimir Levchenko
  • + 4 authors+ 0 author

16 April 2024

Magnetron-sputtered WS2 composite thin films are solid lubricants with excellent performances. However, the low hardness of the WS2 thin films necessitates the further improvement of their wear resistance. For this purpose, an effective strategy is t...

(This article belongs to the Section Thin Films)
  • Feature Paper
  • Article
  • Open Access
362 Views
10 Pages

18 August 2026

CrAlN PVD coatings are frequently used to protect cutting tools because of their superior hardness and wear resistance. However, the influence of carbon addition to such coatings remains largely unexplored. Therefore, Cr-Al-C-N coatings were deposite...

(This article belongs to the Section Tribology)
  • Article
  • Open Access
24 Citations
5,112 Views
21 Pages

Comparative Study of Tribomechanical Properties of HiPIMS with Positive Pulses DLC Coatings on Different Tools Steels

  • Adrián Claver,
  • Emilio Jiménez-Piqué,
  • José F. Palacio,
  • Eluxka Almandoz and ,
  • Jonathan Fernández de Ara,
  • Iván Fernández,
  • José A. Santiago,
  • Eneko Barba and
  • José A. García
  • + 4 authors+ 0 author

29 December 2020

Diamond-like carbon (DLC) coatings are very interesting due to their extraordinary properties; their excellent wear resistance, very low friction coefficient, great hardness, high elastic modulus or biocompatibility can be highlighted, as can their m...

(This article belongs to the Special Issue Design, Characterization and Applications of Functional Coatings)
  • Feature Paper
  • Article
  • Open Access
60 Citations
5,415 Views
16 Pages

Photocatalytic Performance of CuxO/TiO2 Deposited by HiPIMS on Polyester under Visible Light LEDs: Oxidants, Ions Effect, and Reactive Oxygen Species Investigation

  • Hichem Zeghioud,
  • Aymen Amine Assadi,
  • Nabila Khellaf,
  • Hayet Djelal and ,
  • Abdeltif Amrane and
  • Sami Rtimi
  • + 1 author+ 0 author

29 January 2019

In the present study, we propose a new photocatalytic interface prepared by high-power impulse magnetron sputtering (HiPIMS), and investigated for the degradation of Reactive Green 12 (RG12) as target contaminant under visible light light-emitting di...

(This article belongs to the Special Issue Application of Photoactive Nanomaterials in Degradation of Pollutants)
  • Article
  • Open Access
9 Citations
3,084 Views
22 Pages

Mechanical and Tribological Properties of the CrAl/CrAlN and CrAl/CrAlN-(a-CNx) Multilayers Deposited by HIPIMS

  • Cecilio J. Martínez-González,
  • Max F. Flores-Jiménez,
  • David I. Bravo-Barcenas,
  • Omar Jiménez-Alemán and
  • Martín Flores-Martínez

31 July 2023

In this study, two CrAl/CrAlN multilayer coatings of 1.5 µm and 1.2 µm thicknesses were deposited from a (50:50) CrAl sectioned target by high-power impulse magnetron sputtering (HIPIMS) onto A11 tool steel to evaluate the effect over mechanical and...

(This article belongs to the Special Issue Mechanical Properties and Tribological Behavior of Alloy/Coatings, 2nd Edition)
  • Article
  • Open Access
18 Citations
5,109 Views
12 Pages

TiN/NbN Nanoscale Multilayer Coatings Deposited by High Power Impulse Magnetron Sputtering to Protect Medical-Grade CoCrMo Alloys

  • Arunprabhu Arunachalam Sugumaran,
  • Yashodhan Purandare,
  • Krishnanand Shukla,
  • Imran Khan and ,
  • Arutiun Ehiasarian and
  • Papken Hovsepian
  • + 1 author+ 0 author

20 July 2021

This study describes the performance of nanoscale multilayer TiN/NbN coatings deposited on CoCrMo medical-grade alloys by utilising novel mixed high power impulse magnetron sputtering (HIPIMS) and direct current unbalanced magnetron sputtering (UBM)...

(This article belongs to the Special Issue Hard Coatings for Surface Engineering Solutions)
  • Article
  • Open Access
15 Citations
4,748 Views
14 Pages

Mechanical Properties and Residual Stress Measurement of TiN/Ti Duplex Coating Using HiPIMS TiN on Cold Spray Ti

  • Nhat Minh Dang,
  • Wen-Yen Lin,
  • Zhao-Ying Wang,
  • Sima Ahmad Alidokht and ,
  • Richard R. Chromik,
  • Terry Yuan-Fang Chen and
  • Ming-Tzer Lin
  • + 2 authors+ 0 author

This study investigated the mechanical properties and the residual stress of high-power impulse magnetron sputtering (HiPIMS) titanium nitride (TiN) thin film capping on cold spray titanium (Ti) coating. This TiN/Ti duplex coating was deposited on th...

(This article belongs to the Special Issue Recent Advancement in Thin Film Deposition, Characterization, and Surface Engineering)
  • Article
  • Open Access
23 Citations
6,772 Views
12 Pages

Effects of Negative Bias Voltage and Ratio of Nitrogen and Argon on the Structure and Properties of NbN Coatings Deposited by HiPIMS Deposition System

  • Jicheng Ding,
  • Tengfei Zhang,
  • Haijuan Mei,
  • Je Moon Yun and ,
  • Seong Hee Jeong,
  • Qimin Wang and
  • Kwang Ho Kim
  • + 2 authors+ 0 author

24 December 2017

The NbNx>1 coatings were deposited on Si wafer and SUS 304 stainless steel substrates by a high power impulse magnetron sputtering (HiPIMS) system at various bias voltages and the ratios of nitrogen and argon (N2/Ar). By virtue of electron probe m...

(This article belongs to the Special Issue Hybrid Surface Coatings & Process (Selected Papers from HyMaP 2017))
  • Article
  • Open Access
2 Citations
1,325 Views
19 Pages

6 September 2025

In this study, the electrochemical corrosion behavior of TiAlZrTaNb nitride thin films deposited on 304 stainless steel substrates was investigated. The thin films were synthesized using high-power impulse magnetron sputtering (HiPIMS) and are classi...

(This article belongs to the Section Corrosion and Protection)
  • Article
  • Open Access
15 Citations
5,348 Views
16 Pages

Ti–Cu Coatings Deposited by a Combination of HiPIMS and DC Magnetron Sputtering: The Role of Vacuum Annealing on Cu Diffusion, Microstructure, and Corrosion Resistance

  • Lina Qin,
  • Donglin Ma,
  • Yantao Li,
  • Peipei Jing and ,
  • Bin Huang,
  • Fengjuan Jing,
  • Dong Xie,
  • Yongxiang Leng,
  • Behnam Akhavan and
  • Nan Huang
  • + 5 authors+ 0 author

5 November 2020

Titanium-copper (Ti–Cu) coatings have attracted extensive attention in the surface modification of industrial and biomedical materials due to their excellent physical and chemical properties and biocompatibility. Here, Ti–Cu coatings are...

(This article belongs to the Section Surface Coatings for Biomedicine and Bioengineering)
  • Feature Paper
  • Article
  • Open Access
1 Citations
1,086 Views
13 Pages

Antibacterial Efficacy and Biocompatibility of HiPIMS-Ag Films for Prosthetic Application

  • Ping-Yen Hsieh,
  • Shu-Ting Li,
  • Ying-Hung Chen,
  • Hsi-Kai Tsou and ,
  • Ming-Che Wu and
  • Ju-Liang He
  • + 1 author+ 0 author

3 November 2025

Implant-associated infections (IAIs) remain a major cause of orthopedic implant failure, motivating the development of surface coatings that deliver durable antibacterial activity without compromising host compatibility. Here, we deposit silver (Ag)...

(This article belongs to the Special Issue Advanced Coating Technology by Physical Vapor Deposition and Applications)
  • Feature Paper
  • Article
  • Open Access
9 Citations
4,002 Views
19 Pages

Improving the Quality of Friction Stir Welds in Aluminium Alloys

  • Arutiun Ehiasarian,
  • Yashodhan Purandare,
  • Arunprabhu Sugumaran,
  • Papken Hovsepian and ,
  • Peter Hatto and
  • Jeroen De Backer
  • + 1 author+ 0 author

The Stationary Shoulder Friction Stir Welding (SS-FSW) technique benefits from reduced heat input, improved mechanical properties and surface finish of the weld, avoiding the need for post weld processing. Coatings on the tool probe and the shoulder...

(This article belongs to the Special Issue Hard Coatings for Surface Engineering Solutions)
  • Feature Paper
  • Article
  • Open Access
1 Citations
532 Views
14 Pages

13 June 2026

In view of the fact that there are few reports on the preparation of NbC coating by high-power pulsed magnetron sputtering (HiPIMS) technology. In this study, the effects of NbC interlayer thickness on the microstructure, corrosion resistance and ele...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Review
  • Open Access
23 Citations
7,607 Views
13 Pages

23 January 2025

High-Power Impulse Magnetron Sputtering (HiPIMS) has emerged as an excellent technology for producing high-quality nitride coatings, such as aluminum nitride (AlN), titanium nitride (TiN), chromium nitride (CrN), and silicon nitride (SiN), and compos...

(This article belongs to the Special Issue Trends in Coatings and Surface Technology, 2nd Edition)
  • Article
  • Open Access
11 Citations
3,527 Views
14 Pages

Effects of HiPIMS Duty Cycle on Plasma Discharge and the Properties of Cu Film

  • Yongjie Ren,
  • Heda Bai,
  • Xincheng Liu,
  • Jin Li and
  • Xiangli Liu

13 May 2024

In this paper, Cu thin films were deposited on Si (100) substrates by the high−power impulse magnetron sputtering (HiIPMS) technique, and the effects of different duty cycles (from 2.25% to 5.25%) on the plasma discharge characteristics, micros...

(This article belongs to the Special Issue Advances in Thin Films Materials: Properties, Characterization, Physical Vapor Deposition and Application)
  • Article
  • Open Access
16 Citations
5,947 Views
12 Pages

1 May 2020

To protect ecologies and the environment by preventing floods, analysis of the impact of climate change on water requires a tool capable of considering the rainfall-runoff processes on a small scale, for example, 10 m. As has been shown previously, h...

(This article belongs to the Section Hydrology)
  • Article
  • Open Access
11 Citations
8,434 Views
11 Pages

Zr–Si–N films were fabricated through the co-deposition of high-power impulse magnetron sputtering (HiPIMS) and radio-frequency magnetron sputtering (RFMS). The mechanical properties of the films fabricated using various nitrogen flow rat...

(This article belongs to the Special Issue Design and Synthesis of Hard Coatings)
  • Article
  • Open Access
4 Citations
2,909 Views
12 Pages

21 August 2019

Zr–Si–N films with atomic ratios of N/(Zr + Si) of 0.54–0.82 were fabricated through high-power impulse magnetron sputtering (HiPIMS)–radio-frequency magnetron sputtering (RFMS) cosputtering by applying an average HiPIMS power...

(This article belongs to the Special Issue Sputtering Technologies for Growth of Advanced Thin Film)
  • Article
  • Open Access
4 Citations
4,044 Views
17 Pages

11 December 2021

Despite its great potential for thin films deposition and technological applications, the HiPIMS technology has its own limitations including the control of ion energy and flux towards the substrate when coping with the deposition of electrical insul...

(This article belongs to the Section Thin Films)

of 4