Skip to Content

72 Results Found

  • Abstract
  • Open Access
1,362 Views
2 Pages

Sedimentation in the A356-Al2O3 Stirred Cast

  • Omid Emadinia,
  • Rui Madureira,
  • Rui Soares,
  • Helder Nunes and ,
  • Inês Frada,
  • Vitor Anjos,
  • Carlos Silva Ribeiro,
  • Rui Neto,
  • Ana Reis and
  • Manuel Vieira
  • + 5 authors+ 0 author

The production of aluminium metal matrix composites (AlMMCs) is noteworthy for obtaining enhanced mechanical and/or physical properties such as a high strength-to-weight ratio, high stiffness, high wear resistance, and higher thermal conductivity or...

(This article belongs to the Proceedings of MATERIAIS 2022)
  • Feature Paper
  • Article
  • Open Access
12 Citations
6,275 Views
13 Pages

Examination and Simulation of Silicon Macrosegregation in A356 Wheel Casting

  • Pan Fan,
  • Steve Cockcroft,
  • Daan Maijer,
  • Lu Yao and ,
  • Carl Reilly and
  • Andre Phillion
  • + 1 author+ 0 author

29 June 2018

Macrosegregation is commonly seen and has been extensively studied in large ingots in a variety of alloy systems. In comparison, this defect is rarely investigated in small aluminum shape castings. To address this shortcoming, a numerical model was d...

(This article belongs to the Special Issue Optimization of Industrial Casting Processes)
  • Article
  • Open Access
12 Citations
5,372 Views
15 Pages

Thixoforming and Rheo-Die-Casting of A356/SiC Composite

  • Sukangkana Talangkun,
  • Charinrat Potisawang and
  • Phuriphut Saenpong

13 February 2020

This research investigated the rheo-die-casting process and the production of an A356/silicon carbide (SiC) composite by a thixoforming. The composite contained 15 percent by weight SiC particles of around 15–37 µm in size as the reinforc...

(This article belongs to the Special Issue Net-Shape Die Casting of Semi-solid Alloys)
  • Article
  • Open Access
10 Citations
2,844 Views
18 Pages

The Effects of Nanoparticle Reinforcement on the Micromilling Process of A356/Al2O3 Nanocomposites

  • Talha Sunar,
  • Paolo Parenti,
  • Tansel Tunçay,
  • Dursun Özyürek and
  • Massimiliano Annoni

Improving scientific knowledge around the manufacturing of nanocomposites is key since their performance spreads across many applications, including those in meso/micro products. Powder metallurgy is a reliable process for producing these materials,...

  • Article
  • Open Access
14 Citations
2,317 Views
14 Pages

Effect of Heat Treatment on Corrosion Resistance of A356 Casting Alloy

  • Kyung-Su Jang,
  • Taehwan Jang,
  • Hyunbin Jo,
  • Dongmin Shin and ,
  • Soomin Lee,
  • Sung-Dae Kim,
  • Se-Hun Kwon and
  • Junghoon Lee
  • + 3 authors+ 0 author

27 February 2025

Al-Si alloy, known for its excellent corrosion resistance and high strength, is utilized across various industries, such as electric vehicles, requiring light metal parts for efficiency. Heat treatment is an effective process for enhancing the perfor...

(This article belongs to the Special Issue Corrosion, Fatigue and Corrosion Protection of Metals and Their Alloys in Various Environments)
  • Article
  • Open Access
31 Citations
4,140 Views
18 Pages

Ultrasonically Stir Cast SiO2/A356 Metal Matrix Nanocomposites

  • Massoud Malaki,
  • Alireza Fadaei Tehrani,
  • Behzad Niroumand and
  • Amir Abdullah

12 December 2021

Metal matrix nanocomposites are a newly developed materials with promising applications in a wide variety of areas, ranging from medical to aerospace structures, owing to their lightweight high-strength properties. A light metal like aluminum is usua...

  • Feature Paper
  • Article
  • Open Access
10 Citations
4,099 Views
13 Pages

Experimental Investigation and Numerical Simulation of the Fluidity of A356 Aluminum Alloy

  • Hyeon-Sik Bang,
  • Hyeok-In Kwon,
  • Sung-Bean Chung,
  • Dae-Up Kim and
  • Min-Su Kim

20 November 2022

The fluidity of A356 aluminum alloy was experimentally determined at the melt temperatures and vacuum degrees by a series of suction fluidity tests. In order to achieve different cooling rates during the test, quartz tubes, as well as stainless steel...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
8 Citations
3,316 Views
8 Pages

25 August 2022

The flow stress and dynamic recrystallization behavior of A356 aluminum alloy was studied, with a strain rate ranging from 0.001 s−1 to 1 s−1 and temperature ranging from 300 to 500 °C. Both the true stress–strain curves and mic...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
26 Citations
9,625 Views
13 Pages

Effects of Holmium Additions on Microstructure and Properties of A356 Aluminum Alloys

  • Qiang Wang,
  • Zhiming Shi,
  • Hong Li,
  • Yaming Lin and ,
  • Ningyu Li,
  • Tianhao Gong,
  • Ruiying Zhang and
  • Huimin Liu
  • + 3 authors+ 0 author

19 October 2018

Sr-modification of A356 alloys has distinct shortages due to the volatilization and oxidation during remelting and pouring, which often reduce the modification efficiency and mechanical properties of the alloys. To avoid the adverse effects and enhan...

  • Article
  • Open Access
616 Views
21 Pages

Machining Performance of ZrO2–GO-Reinforced A356 Hybrid Nanocomposite

  • Rasmi Ranjan Mishra,
  • Amlana Panda,
  • Ashok Kumar Sahoo and
  • Ramanuj Kumar

25 June 2026

This work examines the machining responses of dry turning in ultrasonic-assisted stir-squeeze cast A356 hybrid nanocomposites reinforced with zirconia (ZrO2) and graphene oxide (GO). Accordingly, flank wear (VBc) ranged from 0.061 to 0.238 mm, influe...

(This article belongs to the Section Metal Matrix Composites)
  • Article
  • Open Access
11 Citations
3,543 Views
11 Pages

Rheological Behavior of the A356 Alloy in the Semisolid State at Low Shear Rates

  • Oscar Martin-Raya,
  • Sergi Menargues,
  • Enric Martin,
  • Maria Teresa Baile and
  • Josep A. Picas

12 March 2023

To control the semisolid processing of aluminum alloys produced by the additive manufacturing technique, an exhaustive knowledge of their rheological behavior is required. In the semisolid state, metallic materials can show rheological characteristic...

(This article belongs to the Special Issue Advanced Light Metal and Alloys: Preparation, Characterization, and Applications)
  • Article
  • Open Access
10 Citations
3,022 Views
10 Pages

Indentation Size Effect of Composite A356 + 6%FA Subjected to ECAP

  • Merima Muslić,
  • Luka Orešković,
  • Vera Rede and
  • Vesna Maksimović

10 May 2022

In this study, metal matrix-based composite (MMC) was subjected to Equal Chanel Angular Pressing (ECAP) in several passes to determine the influence of deformation on the hardness of the samples. Composite based on A356 aluminum alloy and reinforced...

(This article belongs to the Special Issue Material Properties—Superalloys, Ferrous and Lightweight Alloys and Metal Matrix Composites)
  • Article
  • Open Access
14 Citations
3,518 Views
14 Pages

Effect of Ultrasonic-Assisted Modification Treatment on the Microstructure and Properties of A356 Alloy

  • Xinyi Hu,
  • Dongfu Song,
  • Huiping Wang,
  • Yiwang Jia and ,
  • Haiping Zou and
  • Mingjuan Chen
  • + 1 author+ 0 author

22 May 2022

Ultrasonic treatment was applied to an A356 aluminum melt with different modifiers, and the effects of ultrasonic treatment on the structure and properties of the A356 alloy were studied. The results showed that α-Al was effectively refined wit...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
4 Citations
2,935 Views
12 Pages

Effect of Current Input Method on A356 Microstructure in Electromagnetically Stirred Process

  • Joong Suk Roh,
  • Min Heo,
  • Chul Kyu Jin,
  • Jin Ha Park and
  • Chung Gill Kang

2 April 2020

This paper focuses on the electromagnetically stirred process for manufacturing the material required for the semi-solid forming method. The maximum weight of the molten metal used at a laboratory scale in the currently published research is 3 kg. Ho...

  • Article
  • Open Access
18 Citations
5,347 Views
9 Pages

5 February 2016

In this study, the effects of in situ TiAl3 particles on dry sliding wear behavior of A356 aluminum alloy (added Ti) composites were investigated. The wear samples were prepared by adding different amounts of Ti (4%, 6%, and 8%) into A356 powder allo...

  • Article
  • Open Access
6 Citations
4,520 Views
17 Pages

Planning Mechanical Behavior of A356 Alloy Wheels by Using Distinct Heat Treatments

  • Adriano L. Tonetti,
  • Wislei R. Osório,
  • Ausdinir D. Bortolozo and
  • Giovana S. Padilha

13 April 2024

The aim of this investigation concerns evaluating the mechanical strength and microhardness values of A356 alloy samples in distinctive heat treatments, including those commonly applied to automotive wheels. It is recognized that A356 and Al-Si-based...

(This article belongs to the Topic Alloys and Composites Corrosion and Mechanical Properties)
  • Article
  • Open Access
10 Citations
4,208 Views
13 Pages

Effect of Hybrid Ultrasonic and Mechanical Stirring on the Distribution of m-SiCp in A356 Alloy

  • J. Grilo,
  • H. Puga,
  • V. H. Carneiro,
  • S. D. Tohidi and ,
  • F. V. Barbosa and
  • J. C. Teixeira
  • + 1 author+ 0 author

8 May 2020

The present study details the micro-scale silicon carbide particle (m-SiCp) homogeneous distribution in an A356 alloy through hybrid ultrasonic-stirring melt treatment under different operation conditions. Ultrasonically excited fluids were studied b...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
29 Citations
4,444 Views
10 Pages

1 October 2019

This paper studied the relationship between the residual amount of Sr and the morphology of the eutectic Si phase in A356 obtained through different modification treatment processes; additionally, the cooling rates of molds were studied. The eutectic...

(This article belongs to the Collection Alloy and Process Development of Light Metals)
  • Article
  • Open Access
33 Citations
5,863 Views
9 Pages

Influence of Vibration Treatment and Modification of A356 Aluminum Alloy on Its Structure and Mechanical Properties

  • Vladimir V. Promakhov,
  • Marina G. Khmeleva,
  • Ilya A. Zhukov,
  • Vladimir V. Platov and ,
  • Anton P. Khrustalyov and
  • Alexander B. Vorozhtsov
  • + 1 author+ 0 author

15 January 2019

A series of casting experiments was conducted with A356 aluminum alloys by applying vibration treatment and using Al-TiB2 composite master alloys. The main vibration effects include the promotion of nucleation and a reduction in as-cast grain size. U...

  • Article
  • Open Access
9 Citations
6,401 Views
18 Pages

26 June 2017

Semisolid slurry of A356 aluminum alloy was prepared by Self-Inoculation Method, and the secondary solidification behavior during rheo-diecasting forming process was researched. The results indicate that the component with non-dendritic and uniformly...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Casting Alloys)
  • Feature Paper
  • Article
  • Open Access
415 Views
16 Pages

Local Microstructure and Hardness of the Oxide-Layer of Oxalic Acid-Anodized A356 Alloy

  • Alexandra Musza,
  • Dávid Ugi,
  • Nguyen Quang Chinh and
  • Ádám Vida

17 August 2026

The cross-sectional microstructure, local chemical composition, and mechanical behavior of anodic oxide layers produced by oxalic acid anodizing of cast A356 aluminum alloy were investigated using digital optical microscopy, scanning electron microsc...

(This article belongs to the Special Issue Advanced Alloy Degradation and Implants, 2nd Edition)
  • Review
  • Open Access
453 Views
18 Pages

27 September 2026

Heat-treated A356 aluminum alloy has attracted sustained attention because of its low density, good castability and corrosion resistance. These properties make it valuable for automotive, structural and aerospace applications, while its final perform...

(This article belongs to the Special Issue Microstructure, Properties and Characterization of Aluminum Alloys)
  • Article
  • Open Access
10 Citations
2,210 Views
20 Pages

An Investigation on the Enhanced Wear Behavior of Ultrasonically Stirred Cast A356/SiO2np Nano-composites

  • Ahmad Ghahremani,
  • Amir Abdullah,
  • Alireza Fallahi Arezoodar and
  • Manoj Gupta

25 April 2023

Metal matrix nanocomposites (MMNCs) are becoming the materials of choice in a variety of engineering and medical applications owing to their exhibiting a superior combination of targeted properties. Amongst different MMNCs, aluminum-based composites...

(This article belongs to the Special Issue Advances in Metal Matrix Composites: Structure, Properties and Applications)
  • Article
  • Open Access
1,768 Views
19 Pages

Inhibiting Eutectic Si Macrosegregation in Squeeze Cast A356 Alloy by Symmetrical Multidirectional Pressure

  • Weitao Cai,
  • Xiaozu Zhang,
  • Dongtao Wang,
  • Wenping Weng and ,
  • Zibin Wu and
  • Hiromi Nagaumi
  • + 1 author+ 0 author

15 September 2024

The process of symmetrical multidirectional pressure was adopted to inhibit the macrosegregation of eutectic Si in squeeze cast A356 alloy. Five pressure modes were applied to study the effects of multidirectional pressure and the timing of pressure...

(This article belongs to the Section F: Engineering and Materials)
  • Article
  • Open Access
5 Citations
4,753 Views
14 Pages

18 November 2020

Ultrasonic treatment (UST) and its effects, primarily cavitation and acoustic streaming, are useful for a high range of industrial applications, e.g., welding, filtering, cleaning or emulsification. In the metallurgy and foundry industry, UST can be...

(This article belongs to the Special Issue Material Modeling in Multiphysics Simulation)
  • Article
  • Open Access
11 Citations
6,209 Views
11 Pages

6 December 2021

The A356 alloy has been widely used in automotive components, such as wheels and brake disks, because it is an excellent lightweight material with high corrosion resistance and good mechanical properties. Recently, to reduce the weight of brake disks...

(This article belongs to the Special Issue Metal Alloys: Fusion of the Cutting Edge Research Tools with Conventional Metal Study)
  • Article
  • Open Access
16 Citations
5,081 Views
24 Pages

Modelling the Mechanical Attributes (Roughness, Strength, and Hardness) of Al-alloy A356 during Sand Casting

  • Kashif Ishfaq,
  • Muhammad Asad Ali,
  • Naveed Ahmad,
  • Sadaf Zahoor and ,
  • Abdulrahman M. Al-Ahmari and
  • Faisal Hafeez
  • + 1 author+ 0 author

28 January 2020

Sand-casting is a well established primary process for manufacturing various parts of A356 alloy. However, the quality of the casting is adversely affected by the change in the magnitude of the control variables. For instance, a larger magnitude of p...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
5 Citations
1,702 Views
16 Pages

11 February 2025

Mechanical properties and corrosion resistance of La2O3/A356 composites with different contents of La2O3 were investigated by optical microscopy, X-ray diffractometry, scanning electron microscopy, electrochemical tests, and immersion corrosion tests...

(This article belongs to the Special Issue Design and Development of Metal Matrix Composites)
  • Article
  • Open Access
8 Citations
5,942 Views
24 Pages

The Microstructural Refinement of the A356 Alloy Using Semi-Solid and Severe Plastic-Deformation Processing

  • Mohamed Abdelgawad Gebril,
  • Mohd Zaidi Omar,
  • Intan Fadhlina Mohamed,
  • Norinsan Kamil Othman and ,
  • Ahmad Muhammad Aziz and
  • Osama M. Irfan
  • + 1 author+ 0 author

2 November 2023

Improving the engineering properties of A356 alloy is an appealing option for the automotive industry. This study aimed at refining and redistributing Si particles and the eutectic phase by applying T6 heat treatment to a semi-solid A356 alloy, follo...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
6 Citations
2,176 Views
14 Pages

Thermal Management of Friction-Drilled A356 Aluminum Alloy: A Study of Preheating and Drilling Parameters

  • Ahmed Abdalkareem,
  • Rasha Afify,
  • Nadia Hamzawy,
  • Tamer S. Mahmoud and
  • Mahmoud Khedr

Friction drilling is a non-conventional process that generates heat through the interaction between a rotating tool and a workpiece, forming a hole with a bushing. In this study, the effect of the preheating temperature, rotational speed, and feed ra...

  • Article
  • Open Access
1,082 Views
15 Pages

Unveiling the Microstructure Evolution Mechanism of A356 Aluminum Alloy During Squeeze Casting Torsional Formation

  • Zhenhu Wang,
  • Biwu Zhu,
  • Heng Li,
  • Xiao Liu and ,
  • Guoqiang Chen,
  • Shengkai Xiong,
  • Wenhui Liu,
  • Ganlin Qin,
  • Congchang Xu and
  • Luoxing Li
  • + 5 authors+ 0 author

19 September 2025

In this study, a novel casting–forging hybrid forming technique, introducing torsional shear during squeeze casting, was investigated. This approach enhances the forming efficiency and refines the grain size. Using a finite element method coupl...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
2 Citations
1,173 Views
21 Pages

Effect of Anodizing and Welding Parameters on Microstructure and Mechanical Properties of Laser-Welded A356 Alloy

  • Baiwei Zhu,
  • Hongwei Yuan,
  • Jun Liu,
  • Gong Chen and ,
  • Tianyun Feng and
  • Erliang Liu
  • + 1 author+ 0 author

10 December 2025

This study investigates the effects of anodizing and welding parameters on the microstructure and mechanical properties of laser-welded die-cast A356 aluminum alloy. The influence of different surface oxidation conditions, namely, no anodized film (N...

(This article belongs to the Special Issue Cutting Performance of Coated Tools)
  • Article
  • Open Access
11 Citations
3,867 Views
16 Pages

Creep Behavior of A356 Aluminum Alloy Reinforced with Multi-Walled Carbon Nanotubes by Stir Casting

  • L. Shan,
  • C. Y. Tan,
  • X. Shen,
  • S. Ramesh and ,
  • R. Kolahchi,
  • M. H. Hajmohammad and
  • D. K. Rajak
  • + 2 authors+ 0 author

15 December 2022

Lightweight aluminum alloy components are often used to manufacture a variety of engineering components in many industries. In recent years, researchers have studied the effect of improving the mechanical properties of metal alloys by incorporating n...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
13 Citations
3,349 Views
12 Pages

Combining Heat Treatment and High-Pressure Torsion to Enhance the Hardness and Corrosion Resistance of A356 Alloy

  • Mohamed Abdelgawad Gebril,
  • Mohd Zaidi Omar,
  • Intan Fadhlina Mohamed,
  • Norinsan Kamil Othman and
  • Osama M. Irfan

17 May 2022

A356 aluminium alloy is subjected to heat treatment and high-pressure torsion (HPT) processing to investigate the impact of the combined treatments on the alloy’s microstructure refinement, corrosion resistance and hardness. The high-pressure t...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
7 Citations
4,429 Views
19 Pages

Effect of Strain Rate on the Deformation Behaviour of A356-T7 Cast Aluminium Alloys at Elevated Temperatures

  • Elanghovan Natesan,
  • Johan Ahlström,
  • Swathi K. Manchili,
  • Stefan Eriksson and
  • Christer Persson

15 September 2020

Internal combustion engine downsizing and powertrain electrification trends in recent years have led to higher thermal loads on the cylinder head materials with an increased number of engine start–stop thermal load cycles. This requires designi...

(This article belongs to the Special Issue Microstructure, Deformation, and Fatigue Behavior in Metals)
  • Article
  • Open Access
9 Citations
3,956 Views
15 Pages

Structural, Fatigue Behavior, and Mechanical Properties of Zirconium Tungstate-Reinforced Casted A356 Aluminum Alloy

  • Muhammad Raza,
  • Hussein Alrobei,
  • Rizwan Ahmed Malik,
  • Azhar Hussain and ,
  • Meshal Alzaid,
  • Mohsin Saleem and
  • Mian Imran
  • + 2 authors+ 0 author

9 November 2020

The aim of this study is to investigate the structure–property relationship of the zirconium tungstate-reinforced casted A356 aluminum alloy. The reinforcement ceramic used was zirconium tungstate of the negative thermal coefficient type, which...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
10 Citations
4,033 Views
21 Pages

20 December 2021

As the electrification of vehicle powertrains takes prominence to meet stringent emission norms, parts of internal combustion engines like cylinder heads are subjected to an increased number of thermal load cycles. The cost-effective design of such s...

(This article belongs to the Special Issue Mechanical Properties and Characterization of Metallic Materials for Lightweight Structures)
  • Article
  • Open Access
42 Citations
3,647 Views
14 Pages

The Applicability of Die Cast A356 Alloy to Additive Friction Stir Deposition at Various Feeding Speeds

  • Bandar Alzahrani,
  • Mohamed M. El-Sayed Seleman,
  • Mohamed M. Z. Ahmed,
  • Ebtessam Elfishawy and ,
  • Adham M. Z. Ahmed,
  • Kamel Touileb,
  • Nabil Jouini and
  • Mohamed I. A. Habba
  • + 3 authors+ 0 author

13 October 2021

In the current investigation, additive friction stir-deposition (AFS-D) of as-cast hypoeutectic A356 Al alloy was conducted. The effect of feeding speeds of 3, 4, and 5 mm/min at a constant rotational speed of 1200 rpm on the macrostructure, microstr...

(This article belongs to the Special Issue Advanced Manufacturing of Metals and Composites: Effect of Processes on Microstructure and Mechanical Properties)
  • Article
  • Open Access
40 Citations
8,456 Views
14 Pages

Determination of Acceptable Quality Limit for Casting of A356 Aluminium Alloy: Supplier’s Quality Index (SQI)

  • Eray Erzi,
  • Özen Gürsoy,
  • Çağlar Yüksel,
  • Murat Colak and
  • Derya Dispinar

30 August 2019

Aluminium and its alloys have been widely used in the automotive industry for some time and A356 is one of the most popular aluminium alloys today in the sector. It contains approximately 7 wt.% Si and 0.3 wt.% Mg. Due to the defects that may be pres...

(This article belongs to the Special Issue Dedicating to Professor John Campbell's 80th Birthday)
  • Article
  • Open Access
1 Citations
1,794 Views
12 Pages

4 September 2023

Despite the dozens of earlier research verifications, the contribution of shearing of molten metallic alloys during their solidification to grain formation is still ambiguous. Also, modeling of this phenomenon has received very little attention. Expe...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
13 Citations
5,468 Views
10 Pages

Effects of Warm Laser Peening on Thermal Stability and High Temperature Mechanical Properties of A356 Alloy

  • Hansong Chen,
  • Jianzhong Zhou,
  • Jie Sheng,
  • Xiankai Meng and ,
  • Shu Huang and
  • Xiaojiang Xie
  • + 1 author+ 0 author

24 May 2016

To study the effects of warm laser peening (WLP) on the thermal stability and mechanical properties of A356 alloy, the samples were treated by WLP using a Nd:YAG solid-state laser and temperature control device. The residual stress, micro-hardness an...

(This article belongs to the Special Issue Laser Shock Processing on Metal)
  • Article
  • Open Access
15 Citations
8,228 Views
15 Pages

Room Temperature Mechanical Properties of A356 Alloy with Ni Additions from 0.5 Wt to 2 Wt %

  • Lucia Lattanzi,
  • Maria Teresa Di Giovanni,
  • Maverick Giovagnoli,
  • Annalisa Fortini and ,
  • Mattia Merlin,
  • Daniele Casari,
  • Marisa Di Sabatino,
  • Emanuela Cerri and
  • Gian Luca Garagnani
  • + 4 authors+ 0 author

29 March 2018

In recent years, the influence of Ni on high-temperature mechanical properties of casting Al alloys has been extensively examined in the literature. In the present study, room temperature mechanical properties of an A356 alloy with Ni additions from...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Casting Alloys)
  • Article
  • Open Access
54 Citations
15,525 Views
19 Pages

Dynamic and Thermal Properties of Aluminum Alloy A356/Silicon Carbide Hollow Particle Syntactic Foams

  • James Cox,
  • Dung D. Luong,
  • Vasanth Chakravarthy Shunmugasamy,
  • Nikhil Gupta and ,
  • Oliver M. Strbik and
  • Kyu Cho
  • + 1 author+ 0 author

2 December 2014

Aluminum alloy A356 matrix syntactic foams filled with SiC hollow particles (SiCHP) are studied in the present work. Two compositions of syntactic foams are studied for quasi-static and high strain rate compression. In addition, dynamic mechanical an...

  • Article
  • Open Access
513 Views
18 Pages

Effect of the Grain-Refining of A356 Aluminum Alloy Closed-Cell Foams on the Mechanical Compression Properties

  • Jessy Emanuel Gonzalez Herrera,
  • Eduardo Colin García,
  • Alejandro Cruz Ramírez,
  • José Antonio Romero Serrano and ,
  • Juan Cancio Jiménez Lugos,
  • Miguel Pérez Labra,
  • Víctor Hugo Gutiérrez Pérez and
  • Jorge Enrique Rivera Salinas
  • + 3 authors+ 0 author

23 July 2026

Aluminum metallic foams are lightweight porous materials characterized by low density, high stiffness, and remarkable energy absorption capacity. The mechanical performance of these materials strongly depends on the microstructure of the metallic mat...

(This article belongs to the Special Issue State of the Art of Crystalline Metals and Alloys)
  • Article
  • Open Access
1 Citations
1,197 Views
29 Pages

4 June 2026

Aluminum alloy A356 (Al-7Si-0.3Mg) is widely employed in automotive structural components due to its favorable strength-to-weight ratio, yet its mechanical performance is highly sensitive to T6 heat-treatment processes. Conventional heat-treatment sc...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
9 Citations
2,998 Views
18 Pages

10 March 2023

Equiatomic AlCoCrFeNi high-entropy alloy (HEA) has gained significant interest in recent years because of its excellent mechanical properties. A356 aluminum alloy reinforced by AlCoCrFeNi HEA particles was fabricated by friction stir processing (FSP)...

(This article belongs to the Special Issue Additive Manufacturing and Welding Technologies for High-Entropy Alloys and Dissimilar Metals)
  • Article
  • Open Access
7 Citations
3,483 Views
13 Pages

8 March 2024

To enhance the performance of ultra-high voltage power fittings in severe weather conditions without altering their current structure, the high-strength and toughness aluminum alloys were rationally selected to study the optimization of the die-casti...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
6 Citations
4,757 Views
16 Pages

25 May 2023

The fracture performance and damage prediction of die-cast materials are critical to guarantee the safe application of die-cast structural components in lightweight vehicles. Monotonic loading experiments were conducted on different shapes of die-cas...

  • Article
  • Open Access
14 Citations
4,219 Views
15 Pages

Microstructural Evaluation and Corrosion Resistance of Semisolid Cast A356 Alloy Processed by Equal Channel Angular Pressing

  • Mohamed Abdelgawad Gebril,
  • Mohd Zaidi Omar,
  • Intan Fadhlina Mohamed and
  • Norinsan Kamil Othman

8 March 2019

As-cast and semisolid casting using a cooling slope A356 alloy were processed by equal channel angular pressing (ECAP) for Si and grain refinement. The ECAP was conducted at room temperature in a mold, with a channel angle of 120°, and this resul...

(This article belongs to the Special Issue Casting and Forming of Advanced Aluminum Alloys)
  • Article
  • Open Access
2,452 Views
18 Pages

Optimizing the Tribological Performance of Copper-Reinforced A356 Aluminum Alloy: Influence of Heat Treatment and Composition Variation

  • G. Divya Deepak,
  • Nithesh Kashimat,
  • Karthik Birur Manjunathaiah,
  • Vignesha Nayak and ,
  • Gajanan Anne and
  • Sathyashankara Sharma
  • + 1 author+ 0 author

Recent progress in metal matrix composites (MMCs) has led to significant research efforts aimed at refining reinforcement methods and processing techniques and enhancing material properties. Incorporating reinforcements has notably improved both mech...

(This article belongs to the Special Issue Mechanical Properties of Composite Materials and Joints)

of 2