- Article
Nonlinear narrowband low-frequency noise generated during tractors’ operation significantly affects operators’ comfort and working efficiency. Traditional linear active noise control algorithms often struggle to effectively suppress such...
Nonlinear narrowband low-frequency noise generated during tractors’ operation significantly affects operators’ comfort and working efficiency. Traditional linear active noise control algorithms often struggle to effectively suppress such...
The lithium-ion battery is the power source of an electric vehicle, so it is of great significance to estimate the state of charge (SOC) of lithium-ion batteries accurately to ensure vehicle safety. To improve the accuracy of the parameters of the eq...
In this paper, a sparse set-membership proportionate normalized least mean square (SM-PNLMS) algorithm integrated with a correntropy induced metric (CIM) penalty is proposed for acoustic channel estimation and echo cancellation. The CIM is used for c...
This study proposes a fully automated gearbox fault diagnosis approach that does not require knowledge about the specific gearbox construction and its load. The proposed approach is based on evaluating an adaptive filter’s prediction error. The obtai...
This paper presents a novel variable matrix-type step-size affine projection sign algorithm (VMSS-APSA) characterized by robustness against impulsive noise. To mathematically derive a matrix-type step size, VMSS-APSA utilizes mean-square deviation (M...
Conventional affine projection (AP) algorithm with a fixed order is subject to a tradeoff between convergence speed and steady-state misalignment. In order to address such problem, a switching mechanism on the order of AP algorithm is proposed by com...
Stereophonic audio devices employ two loudspeakers and two microphones in order to create a bidirectional sound effect. In this context, the stereophonic acoustic echo cancellation (SAEC) setup requires the estimation of four echo paths, each one cor...
Magnetic sensors are highly relevant in clinical and industrial applications such as localization tasks and geological investigations. The spatial behavior of these sensors is of great interest for accurate forward modeling and the consequential poss...
The generalized maximum correntropy criterion (GMCC) algorithm is computationally simple and robust against impulsive noise but it suffers from slow convergence speed as it is derived and based on stochastic gradient, which only use the current data...
With the increase of labor cost and the development of agricultural mechanization, standardized orchards suitable for autonomous operations of agricultural machinery will be a future development trend of the fruit-planting industry. For field-plantin...
High-dimensional system identification problems can be efficiently addressed based on tensor decompositions and modelling. In this paper, we design a recursive least-squares (RLS) algorithm tailored for the identification of trilinear forms, namely R...
The recently proposed tensor-based recursive least-squares dichotomous coordinate descent algorithm, namely RLS-DCD-T, was designed for the identification of multilinear forms. In this context, a high-dimensional system identification problem can be...
The multilinear system framework allows for the exploitation of the system identification problem from different perspectives in the context of various applications, such as nonlinear acoustic echo cancellation, multi-party audio conferencing, and vi...
MEMS (micro-electro-mechanical system)-based inertial sensors, i.e., accelerometers and angular rate sensors, are commonly used as a cost-effective solution for the purposes of navigation in a broad spectrum of terrestrial and aerospace applications....
In dynamic propagation environments, beamforming algorithms may suffer from strong interference, steering vector mismatches, a low convergence speed and a high computational complexity. Reduced-rank signal processing techniques provide a way to addre...
Photoplethysmography (PPG) technology has been used to develop small, wearable, pulse rate sensors. These devices, consisting of infrared light-emitting diodes (LEDs) and photodetectors, offer a simple, reliable, low-cost means of monitoring the puls...
In this study, the application of an intelligent digital twin integrated with machine learning for bearing anomaly detection and crack size identification will be observed. The intelligent digital twin has two main sections: signal approximation and...
Real-time estimation of the road surface friction coefficient is crucial for vehicle dynamics control. Under large steering angles, the accuracy of existing road surface friction coefficient estimation methods is unsatisfactory due to the nonlinear c...
This paper mainly considers the fractional parameter identification algorithms of the bilinear-in-parameter autoregressive (AR-BIP) system. The data filtering technique is introduced to improve the parameter estimation accuracy of the AR-BIP system,...
The adoption of digital twins has revolutionized industrial process simulation, monitoring, and control effectiveness. However, practical implementations of digital twins are hindered by substantial challenges, including extended development time, di...
An adaptive hybrid fuzzy-proportional plus crisp-integral current control algorithm (CCA) for regulating supply current and enhancing the operation of a shunt active power filter (SAPF) is presented. It introduces a unique integration of fuzzy-propor...
Accurate wind power prediction is vital for improving grid stability. In order to improve the accuracy of wind power prediction, in this study, a hybrid prediction model combining time-varying filtered empirical modal decomposition (TVFEMD), improved...
When the adaptive filter length is increased, the calculation complexity increases rapidly because the relationship between the calculation and the adaptive filter length N contains a power function with no secondary path identification algorithm. Un...
In this paper, the fast least-mean-squares (LMS) algorithm was used to both eliminate noise corrupting the important information coming from a piezoresisitive accelerometer for automotive applications, and improve the convergence rate of the filterin...
This paper proposes an improved adaptive filtering algorithm based on the Sage–Husa adaptive Kalman filtering algorithm to address the issue of measurement noise characteristics impacting the navigation accuracy in strapdown inertial navigation...
To solve the problem that the ship’s strapdown inertial navigation system (SINS) alignment accuracy decreases with the increase of the nonlinear filtering state dimension under mooring conditions, a method based on Kalman filter (KF) and Adaptive sca...
In this paper, an adaptive fading-memory receding-horizon (AFMRH) filter is proposed by combining the receding-horizon structure and the adaptive fading-memory method. In the recent finite horizon, state error covariance is adapted with an adaptive f...
To address the diverse requirements of accuracy and robustness in integrated navigation for unmanned aerial vehicles, an interactive robust filter algorithm that integrates the interactive multiple model concept and leverages the complementary applic...
Autonomous Underwater Vehicles (AUVs) rely on integrated navigation systems and corresponding filtering algorithms to ensure mission success and the spatiotemporal accuracy of sampled data. Among these, the ensemble Kalman filter (EnKF) combines Mont...
To enhance the positioning accuracy of autonomous underwater vehicles (AUVs), a new adaptive filtering algorithm (RHAUKF) is proposed. The most widely used filtering algorithm is the traditional Unscented Kalman Filter or the Adaptive Robust UKF (ARU...
The Hammerstein adaptive filter using maximum correntropy criterion (MCC) has been shown to be more robust to outliers than the ones using the traditional mean square error (MSE) criterion. As there is no report on the robust Hammerstein adaptive fil...
With the development of location-based service (LBS), indoor positioning based on pedestrian dead reckoning (PDR) has become a hot research topic. Smartphones are becoming more popular for indoor positioning. This paper proposes a two-step robust-ada...
Augmented IIR filter adaptive algorithms have been considered in many studies, which are suitable for proper and improper complex-valued signals. However, lots of augmented IIR filter adaptive algorithms are developed under the mean square error (MSE...
Adaptive filtering has the advantages of real-time processing, small computational complexity, and good adaptability and robustness. It has been widely used in communication, navigation, signal processing, optical fiber sensing, and other fields. In...
We propose a communication-navigation integrated signal (CPIS), which is superimposed on the communication signal with power that does not affect the communication service, and realizes high-precision indoor positioning in a mobile communication netw...
To address the issues of decreased accuracy and poor stability in distributed transfer alignment caused by factors such as wing deflection and deformation in complex flight environments, this paper proposes a wing-distributed transfer alignment metho...
The maximum correntropy criterion (MCC) has recently been successfully applied to adaptive filtering. Adaptive algorithms under MCC show strong robustness against large outliers. In this work, we apply the MCC criterion to develop a robust Hammerstei...
Dual-polarized sensitive arrays (DPSAs) with the space–time-polarization adaptive processing (STPAP) technique, which employs the polarization domain as well as the space domain and time domain to filter out interferences, can cancel a larger n...
The current real-time detection of sowing depth has the problems of low detection accuracy and poor reliability. After analyzing the movement mechanism of the sowing monomer parallel four-bar linkage, an improved adaptive Kalman filtering method for...
As an important component of autonomous intelligent systems, the research on autonomous positioning algorithms used by UAVs is of great significance. In order to resolve the problem whereby the GNSS signal is interrupted, and the visual sensor lacks...
A sensorless control system of a permanent magnet synchronous motor based on an extended Kalman filter (EKF) algorithm faces problems with inaccurate or mismatched process noise statistics. This problem affects the performance of the filter, resultin...
Presently, the technology development trend of active noise control (ANC) systems is focused on implementing advanced adaptive filters in resource-constrained electronic appliances. Recently, several authors have proved that the use of two adaptive f...
In order to solve the problems of filtering divergence and low accuracy in Kalman filter (KF) applications in a high-speed unmanned aerial vehicle (UAV), this paper proposed a new method of integrated robust adaptive Kalman filter: strong adaptive Ka...
Traditional adaptive filtering algorithms are non-recursive systems that cannot use a time-variant reference input in real time and are not appropriate for control signals with uncertainties and unanticipated conditions. The main purpose of this rese...
Low-performing GPS receivers, often used in challenging scenarios such as attitude maneuver and attitude rotation, are frequently encountered for micro–nano satellites. To address these challenges, this paper proposes a modified robust adaptive...
Nonlinear filtering algorithms have significant implications in the optimal estimation of navigation states and in improving the accuracy, reliability, and robustness of navigation systems. This manuscript surveys the developments of the nonlinear fi...
In vehicle GNSS/INS integrated navigation, robust and adaptive algorithms have become one of the key technologies for achieving a comprehensive PNT due to their ability to control the gross errors of the observation model and dynamic model. The Sage&...
Aiming at the issue of time-varying measurement noise with heavy-tailed characteristics and outliers generated by the polarization compass (PC) in the micro-electro-mechanical system–inertial navigation system (MEMS-INS) and PC-integrated navig...
Random noise degrades the quality and reduces the interpretability of Ground Penetrating Radar (GPR) data. The Block Matching Three Dimension (BM3D) algorithm is effective at suppressing Gaussian noise, but ineffective at handling salt-and-pepper noi...
The features of measurement and process noise are directly related to the optimal performance of the cubature Kalman filter. The maneuvering target model’s high level of uncertainty and non-Gaussian mean noise are typical issues that the radar...
of 45