Skip to Content

Polymers, Volume 16, Issue 18

2024 September-2 - 133 articles

Cover Story: This study uncovers the origins of the association between Lysozyme and PAA in water using molecular dynamics simulations and experiments. Simulations reveal that the structure of Lysozyme remains largely stable, with minor conformational changes induced by the PAA and temperature. Thermal treatment affects the complexation process, leading to structural and energy changes, particularly in the α-helices. Amino acid interactions with PAA vary with temperature, influencing the complexation pathway. Electrostatic interactions are dominant in the complex. This information can aid in designing biopolymer/protein materials and understanding protein function under the immobilization of polyelectrolytes and mild denaturation processes. View this paper
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list .
  • You may sign up for email alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.

Articles (133)

  • Article
  • Open Access
3 Citations
3,009 Views
16 Pages

Upcycling Post-Consumer Paint Pail Plastic Waste

  • Rajkamal Balu,
  • Swati Sharma,
  • Rachael Roberts,
  • Jitraporn Vongsvivut and
  • Namita Roy Choudhury

18 September 2024

The need for ending plastic waste and creating a circular economy has prompted significant interest in developing a new family of composite materials through recycling and recovery of waste resources (including bio-sourced materials). In this work, a...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
15 Citations
3,506 Views
19 Pages

18 September 2024

In recent decades, in order to replace traditional synthetic polymer composites, engineering research has focused on the development of new alternatives such as green biocomposites constituted by an eco-sustainable matrix reinforced by natural fibers...

(This article belongs to the Special Issue Epoxy Polymers and Composites)
  • Review
  • Open Access
53 Citations
10,967 Views
42 Pages

18 September 2024

Gene therapy is the technique of inserting foreign genetic elements into host cells to achieve a therapeutic effect. Although gene therapy was initially formulated as a potential remedy for specific genetic problems, it currently offers solutions for...

(This article belongs to the Special Issue Biopolymer-Based Materials in Medical Applications)
  • Article
  • Open Access
4 Citations
3,747 Views
15 Pages

Photo-Crosslinked Polyurethane—Containing Gel Polymer Electrolytes via Free-Radical Polymerization Method

  • Fatmanur Uyumaz,
  • Yerkezhan Yerkinbekova,
  • Sandugash Kalybekkyzy and
  • Memet Vezir Kahraman

18 September 2024

Using a novel technique, crosslinked gel polymer electrolytes (GPEs) designed for lithium-ion battery applications have been created. To form the photo crosslink via free-radical polymerization, a mixture of polyurethane acrylate (PUA), polyurethane...

(This article belongs to the Section Polymer Membranes and Films)
  • Article
  • Open Access
16 Citations
5,260 Views
14 Pages

17 September 2024

Lithium-ion batteries (LIBs) are well known for their energy efficiency and environmental benefits. However, increasing their energy density compromises their safety. This study introduces a novel ceramic-coated separator to enhance the performance a...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
11 Citations
3,386 Views
12 Pages

17 September 2024

To improve the reinforcement effect between a binder and high solid filler in a propellant formula, grafting the bonding group into the binder to form a neutral polymeric is a practically novel approach to improving the interface properties of the pr...

(This article belongs to the Special Issue Mechanical Behavior of Polymeric Materials: Recent Studies, 2nd Edition)
  • Article
  • Open Access
12 Citations
3,671 Views
24 Pages

Comprehensive Study of Mechanical, Electrical and Biological Properties of Conductive Polymer Composites for Medical Applications through Additive Manufacturing

  • Emese Paari-Molnar,
  • Kinga Kardos,
  • Roland Told,
  • Imre Simon and ,
  • Nitin Sahai,
  • Peter Szabo,
  • Judit Bovari-Biri,
  • Alexandra Steinerbrunner-Nagy,
  • Judit E. Pongracz and
  • Peter Maroti
  • + 6 authors+ 1 author

17 September 2024

Conductive polymer composites are commonly present in flexible electrodes for neural interfaces, implantable sensors, and aerospace applications. Fused filament fabrication (FFF) is a widely used additive manufacturing technology, where conductive fi...

(This article belongs to the Special Issue 3D Printing of Polymer Composites)
  • Article
  • Open Access
8 Citations
2,339 Views
20 Pages

17 September 2024

Fiber-based sorbent materials are an essential part of containing oil spills, thus preventing ecological damage. Poly(styrene-b-isobutylene-b-styrene) thermoplastic elastomer fibers were successfully produced by centrifugal spinning. Scanning electro...

(This article belongs to the Special Issue Fiber Spinning Technologies and Functional Polymer Fiber Development)
  • Article
  • Open Access
12 Citations
2,692 Views
12 Pages

Flexible Ti3C2Tx-Polyurethane Electrodes for Versatile Wearable Applications

  • Qiaohang Guo,
  • Kepei Chen,
  • Wei Yu,
  • Man Peng and ,
  • Nuozhou Yi,
  • Zhen Wang,
  • Peidi Zhou,
  • Kaihuai Yang,
  • Fei Han and
  • Mingcen Weng
  • + 5 authors+ 0 author

17 September 2024

With the development of science and technology, wearable electronics are increasingly widely used in medical, environmental monitoring, and other fields. Thus, the demand for flexible electrodes is increasing. The two-dimensional material Ti3C2Tx has...

(This article belongs to the Special Issue Application and Characterization of Polymer Composites)
  • Article
  • Open Access
4 Citations
3,873 Views
17 Pages

Innovative Application of Salophen Derivatives in Organic Electronics as a Composite Film with a Poly(3,4-Ethylenedioxythiophene)-poly(styrenesulfonate) Matrix

  • María Elena Sánchez Vergara,
  • Omar Jimenez Correa,
  • Ricardo Ballinas-Indilí,
  • Ismael Cosme and ,
  • José Ramón Álvarez Bada and
  • Cecilio Álvarez-Toledano
  • + 1 author+ 0 author

17 September 2024

In this work, we present the innovative synthesis of salophen (acetaminosalol) derivatives in a solvent-free environment by high-speed ball milling, using a non-conventional activation method, which allowed obtaining compounds in a shorter time and w...

(This article belongs to the Special Issue Functional Polymer Composites: Synthesis, Characterization and Application II)
  • Article
  • Open Access
1 Citations
2,012 Views
13 Pages

16 September 2024

When in contact with water, poly(lactic acid), PLA, undergoes several physical changes. A very evident one is opacification, namely the change from the typical transparent appearance to a white opaque color. This phenomenon is particularly significan...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
8 Citations
2,253 Views
15 Pages

Elimination of Delamination during the Drilling of Biocomposite Materials with Flax Fibers

  • Martin Váňa,
  • Štěpánka Dvořáčková,
  • Tomáš Knápek and
  • Dora Kroisová

16 September 2024

The present study focuses on the elimination of delamination during the drilling of a linen-based biocomposite material in epoxy resin used for the manufacture of sports kayaks, depending on the tool material, cutting conditions, and the use of addit...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
9 Citations
3,281 Views
23 Pages

16 September 2024

This work is part of the current research trend to develop a hydrogel carrier of insulin to promote wound healing. Topically applied insulin promotes keratinocyte proliferation and migration, increases collagen synthesis, reduces inflammation and oxi...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
9 Citations
3,205 Views
19 Pages

Diffusion Wave Spectroscopy Microrheological Characterization of Gelling Agarose Solutions

  • Nuria Mancebo,
  • Ramon G. Rubio,
  • Francisco Ortega,
  • Carlo Carbone and ,
  • Eduardo Guzmán,
  • Fernando Martínez-Pedrero and
  • Miguel A. Rubio
  • + 2 authors+ 0 author

16 September 2024

This work investigated the gelation kinetics and mechanical properties of agarose hydrogels studied at different concentrations (in the range 1–5 g/L) and temperatures. Rheological measurements were performed by diffusing wave spectroscopy (DWS...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
18 Citations
3,178 Views
18 Pages

15 September 2024

Enhanced oil recovery (EOR) methods are generally employed in depleted reservoirs to increase the recovery factor beyond that of water flooding. Polymer flooding is one of the major EOR methods. EOR polymer solutions (especially the synthetic ones ch...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
4 Citations
3,863 Views
17 Pages

Rheological Characterization of Genipin-Based Crosslinking Pigment and O-Carboxymethyl Chitosan–Oxidized Hyaluronic Acid In Situ Formulable Hydrogels

  • Ivo Marquis Beserra Junior,
  • Débora de Sousa Lopes,
  • Milena Costa da Silva Barbosa,
  • João Emídio da Silva Neto and ,
  • Henrique Nunes da Silva,
  • Marcus Vinícius Lia Fook,
  • Rômulo Feitosa Navarro and
  • Suédina Maria de Lima Silva
  • + 3 authors+ 0 author

15 September 2024

The aim of this study was to develop a material capable of rapidly absorbing bodily fluids and forming a resilient, adhesive, viscoelastic hydrogel in situ to prevent post-surgical adhesions. This material was formulated using O-carboxymethyl chitosa...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Review
  • Open Access
25 Citations
6,380 Views
64 Pages

Composite Track-Etched Membranes: Synthesis and Multifaced Applications

  • Anastassiya A. Mashentseva,
  • Duygu S. Sutekin,
  • Saniya R. Rakisheva and
  • Murat Barsbay

15 September 2024

Composite track-etched membranes (CTeMs) emerged as a versatile and high-performance class of materials, combining the precise pore structures of traditional track-etched membranes (TeMs) with the enhanced functionalities of integrated nanomaterials....

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
105 Citations
2,769 Views
19 Pages

15 September 2024

Polymeric composites for manipulating the sustained release of an encapsulated active ingredient are highly sought after for many practical applications; particularly, water-insoluble polymers and core–shell structures are frequently explored t...

(This article belongs to the Section Polymer Fibers)
  • Review
  • Open Access
16 Citations
5,798 Views
19 Pages

15 September 2024

The use of organic semiconductors in electronic devices, including transistors, sensors, and memories, unlocks innovative possibilities such as streamlined fabrication processes, enhanced mechanical flexibility, and potential new applications. Nevert...

(This article belongs to the Section Smart and Functional Polymers)
  • Article
  • Open Access
7 Citations
2,029 Views
18 Pages

15 September 2024

Polymer grouting materials are increasingly used in the filling of mine fissures. Unlike conventional inorganic grouting materials, the self-expansion of polymers adds complexity to their diffusion process within the crack. The objective of this rese...

(This article belongs to the Special Issue Advances in the Preparation, Properties and Application of Polyurethane, Cellulose and Their Composites (2nd Edition))
  • Article
  • Open Access
10 Citations
3,250 Views
14 Pages

Melatonin and Bacterial Cellulose Regulate the Expression of Inflammatory Cytokines, VEGF, PCNA, and Collagen in Cutaneous Wound Healing in Diabetic Rats

  • Jaiurte Gomes Martins da Silva,
  • Ismaela Maria Ferreira de Melo,
  • Érique Ricardo Alves,
  • Glícia Maria de Oliveira and ,
  • Anderson Arnaldo da Silva,
  • Isabela Macário Ferro Cavalcanti,
  • Diego Neves Araujo,
  • Flávia Cristina Morone Pinto,
  • José Lamartine de Andrade Aguiar and
  • Álvaro Aguiar Coelho Teixeira
  • + 6 authors+ 1 author

15 September 2024

The poor healing of diabetic wounds is characterized by prolonged inflammation and decreased collagen deposition. Diabetic patients exhibit changes in the plasma concentrations of pro-inflammatory cytokines, and the role of specific dressings may hav...

(This article belongs to the Special Issue Hydrogel Materials for Drug Delivery and Tissue Engineering)
  • Article
  • Open Access
10 Citations
3,561 Views
16 Pages

Modified Cellulose-Based Waste for Enhanced Adsorption of Selected Heavy Metals from Wastewater

  • Katarina Trivunac,
  • Snežana Mihajlović,
  • Marija Vukčević,
  • Marina Maletić and ,
  • Biljana Pejić,
  • Ana Kalijadis and
  • Aleksandra Perić Grujić
  • + 2 authors+ 0 author

14 September 2024

Due to industrial growth and its impact on the environment, the increasing amount of industrial waste requires a comprehensive approach aligned with the principles of sustainable development. The main goals are not only to preserve natural resources...

(This article belongs to the Special Issue Polysaccharide-Based Materials: Developments and Properties)
  • Article
  • Open Access
3 Citations
2,176 Views
11 Pages

14 September 2024

Ultraviolet (UV) ink is a primary type of ink used in additive manufacturing with 3D inkjet printing. However, ink aggregation presents a challenge in nano-inkjet printing, affecting the stability and quality of the printing fluid and potentially lea...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
9 Citations
3,354 Views
25 Pages

Optimization of 3D Printing Parameters of High Viscosity PEEK/30GF Composites

  • Dmitry Yu. Stepanov,
  • Yuri V. Dontsov,
  • Sergey V. Panin,
  • Dmitry G. Buslovich and ,
  • Vladislav O. Alexenko,
  • Svetlana A. Bochkareva,
  • Andrey V. Batranin and
  • Pavel V. Kosmachev
  • + 3 authors+ 0 author

14 September 2024

The aim of this study was to optimize a set of technological parameters (travel speed, extruder temperature, and extrusion rate) for 3D printing with a PEEK-based composite reinforced with 30 wt.% glass fibers (GFs). For this purpose, both Taguchi an...

(This article belongs to the Special Issue Additive Manufacturing of Fibre Reinforced Polymer Composites)
  • Article
  • Open Access
15 Citations
3,539 Views
15 Pages

14 September 2024

Ethylene-propylene-diene monomer (EPDM) is a key engineering material; its mechanical characterization is important for the safe use of the material. In this paper, the coupled effects of thermal degradation temperature and time on the tensile mechan...

(This article belongs to the Section Polymer Physics and Theory)
  • Review
  • Open Access
143 Citations
19,409 Views
45 Pages

Applications of Long Short-Term Memory (LSTM) Networks in Polymeric Sciences: A Review

  • Ivan Malashin,
  • Vadim Tynchenko,
  • Andrei Gantimurov,
  • Vladimir Nelyub and
  • Aleksei Borodulin

14 September 2024

This review explores the application of Long Short-Term Memory (LSTM) networks, a specialized type of recurrent neural network (RNN), in the field of polymeric sciences. LSTM networks have shown notable effectiveness in modeling sequential data and p...

(This article belongs to the Special Issue Computational and Experimental Approaches in Polymeric Materials)
  • Article
  • Open Access
8 Citations
2,689 Views
18 Pages

Bacterial Cellulose-Derived Sorbents for Cr (VI) Remediation: Adsorption, Elution, and Reuse

  • Uriel Fernando Carreño Sayago,
  • Vladimir Ballesteros Ballesteros and
  • Angelica María Lozano Aguilar

14 September 2024

The search for adsorbents that are non-toxic and low cost with a high adsorption capacity and excellent recyclability is a priority to determine the way to reduce the serious environmental impacts caused by the discharge of effluents loaded with heav...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Review
  • Open Access
260 Citations
30,591 Views
25 Pages

Recent Applications of PLGA in Drug Delivery Systems

  • Jie Yang,
  • Huiying Zeng,
  • Yusheng Luo,
  • Ying Chen and ,
  • Miao Wang,
  • Chuanbin Wu and
  • Ping Hu
  • + 2 authors+ 0 author

14 September 2024

Poly(lactic-co-glycolic acid) (PLGA) is a widely used biodegradable and biocompatible copolymer in drug delivery systems (DDSs). In this article, we highlight the critical physicochemical properties of PLGA, including its molecular weight, intrinsic...

(This article belongs to the Section Polymer Applications)
  • Review
  • Open Access
40 Citations
10,109 Views
51 Pages

A Review on the Application of Deep Eutectic Solvents in Polymer-Based Membrane Preparation for Environmental Separation Technologies

  • Gorka Marco-Velasco,
  • Alejandro Gálvez-Subiela,
  • Ramón Jiménez-Robles,
  • Marta Izquierdo and ,
  • Amparo Cháfer and
  • José David Badia
  • + 1 author+ 0 author

14 September 2024

The use of deep eutectic solvents (DESs) for the preparation of polymer membranes for environmental separation technologies is comprehensively reviewed. DESs have been divided into five categories based on the hydrogen bond donor (HBD) and acceptor (...

(This article belongs to the Section Polymer Membranes and Films)
  • Article
  • Open Access
24 Citations
6,595 Views
15 Pages

Bio-Epoxy Resins Based on Lignin and Tannic Acids as Wood Adhesives—Characterization and Bonding Properties

  • Ivana Gavrilović-Grmuša,
  • Milica Rančić,
  • Tamara Tešić,
  • Stevan Stupar and ,
  • Milena Milošević and
  • Jelena Gržetić
  • + 1 author+ 0 author

14 September 2024

The possibility of producing and designing bio-epoxides based on the natural polyphenol lignin/epoxidized lignin and tannic acids for application as wood adhesives is presented in this work. Lignin and tannic acids contain numerous reactive hydroxyl...

(This article belongs to the Special Issue Recent Developments in Biodegradable and Biobased Polymers II)
  • Article
  • Open Access
9 Citations
2,818 Views
24 Pages

14 September 2024

Carbon fiber-reinforced polymer (CFRP), known for its light weight, high strength, and corrosion-resistant properties, is extensively used in the lightweight design of satellite components, the optimization of electronic device casings, and the proce...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
18 Citations
4,845 Views
25 Pages

Investigating Additive Manufacturing Possibilities for an Unmanned Aerial Vehicle with Polymeric Materials

  • Laura Šostakaitė,
  • Edvardas Šapranauskas,
  • Darius Rudinskas,
  • Arvydas Rimkus and
  • Viktor Gribniak

14 September 2024

Fused filament fabrication, also known as fused deposition modeling and 3D printing, is the most common additive manufacturing technology due to its cost-effectiveness and customization flexibility compared to existing alternatives. It may revolution...

(This article belongs to the Special Issue 3D Printing of Polymer-Based Composite Materials)
  • Review
  • Open Access
142 Citations
14,445 Views
34 Pages

Biodegradable Natural Hydrogels for Tissue Engineering, Controlled Release, and Soil Remediation

  • Ane Garcia-Garcia,
  • Sara Muñana-González,
  • Senentxu Lanceros-Mendez,
  • Leire Ruiz-Rubio and ,
  • Leyre Perez Alvarez and
  • José Luis Vilas-Vilela
  • + 1 author+ 0 author

14 September 2024

This article provides insights into hydrogels of the most promising biodegradable natural polymers and their mechanisms of degradation, highlighting the different possibilities of controlling hydrogel degradation rates. Since biodegradable hydrogels...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
15 Citations
2,721 Views
15 Pages

Exploiting the Properties of Non-Wood Feedstocks to Produce Tailorable Lignin-Containing Cellulose Nanofibers

  • Meghan E. Lamm,
  • Donna A. Johnson,
  • Katie Copenhaver,
  • Samarthya Bhagia and ,
  • Amber M. Hubbard,
  • Colleen C. Walker,
  • Kevin Doyle and
  • Soydan Ozcan
  • + 3 authors+ 0 author

14 September 2024

Lignin-containing cellulose nanofibrils (LCNFs) are mainly produced commercially from treated wood pulp, which can decrease some of the carbon-negative benefits of utilizing biomass feedstock. In this work, LCNFs are prepared from non-wood feedstocks...

(This article belongs to the Special Issue Cellulose and Cellulose Micro/Nanomaterials: Recent Research and Applications)
  • Article
  • Open Access
14 Citations
4,903 Views
18 Pages

Study on Thermal Cycling Reliability of Epoxy-Enhanced SAC305 Solder Joint

  • Peng Zhang,
  • Songbai Xue,
  • Lu Liu,
  • Jianhao Wang and ,
  • Hiroaki Tatsumi and
  • Hiroshi Nishikawa
  • + 1 author+ 0 author

14 September 2024

In this work, epoxy was added into commercial Sn-3.0Ag-0.5Cu (SAC305) solder paste to enhance the thermal cycling reliability of the joint. The microstructure and fracture surface were observed using a scanning electron microscope/energy dispersive s...

(This article belongs to the Special Issue Mechanical Behaviour of Polymeric-Based Systems Used in Engineering Applications)
  • Review
  • Open Access
82 Citations
10,347 Views
17 Pages

13 September 2024

The nanofiber materials of three-dimensional spatial structure synthesized by electrospun have the characteristics of high porosity, high specific surface area, and high similarity to the natural extracellular matrix (ECM) of the human body. These ar...

(This article belongs to the Special Issue Biopolymer Composites for Biomedicine Applications)
  • Article
  • Open Access
9 Citations
1,897 Views
19 Pages

13 September 2024

The demand for polymer composites with improved mechanical and electrical properties is crucial for advanced aerospace, electronics, and energy storage applications. Single-walled carbon nanotubes (SWCNTs) and iron oxide (Fe3O4) nanoparticles are key...

(This article belongs to the Special Issue Processing, Characterization and Modeling of Polymer Nanocomposites)
  • Article
  • Open Access
1,482 Views
12 Pages

13 September 2024

Cyanate, a toxic product from the chemical oxidation treatment of highly toxic cyanide, can be converted to harmless ammonia and carbon dioxide by cyanase (EC 4.2.1.104). Cyanase from Thermomyces lanuginosus was entrapped in biomimetic silica to impr...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
4 Citations
2,254 Views
12 Pages

13 September 2024

In this paper, the PANI/PDA-Ti4O7 composite coating was prepared on 316L by constant current deposition with a current density of 2.8 mA·cm−2, in which the Ti4O7 powders were modified by PDA (polydopamine). The open-circuit potential of...

(This article belongs to the Section Smart and Functional Polymers)
  • Article
  • Open Access
7 Citations
2,605 Views
20 Pages

Adding Rare Earth Oxide Markers to Polyoxymethylene to Improve Plastic Recycling through Tracer-Based Sorting

  • Aleksander Jandric,
  • Christoph Olscher,
  • Christian Zafiu,
  • Robert Lielacher and ,
  • Christoph Lechner,
  • Andrea Lassenberger and
  • Florian Part
  • + 2 authors+ 0 author

13 September 2024

Engineering plastics, such as polyoxymethylene (POM), are high-performance thermoplastics designed to withstand high temperature or mechanical stress and are used in electronic equipment, the automotive industry, construction, or specific household u...

(This article belongs to the Special Issue Recycling of Plastic and Rubber Wastes, 2nd Edition)
  • Article
  • Open Access
16 Citations
4,321 Views
13 Pages

13 September 2024

With global warming in recent years, extreme weather conditions have increased in frequency and intensity, exacerbating the challenges for waterproofing materials. The current stages of SBS asphalt waterproofing membrane aging research mainly focus o...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
9 Citations
4,342 Views
20 Pages

13 September 2024

Rapid technological advancements in recent years have opened the door to innovative solutions in the field of telecommunications and wireless systems; thus, new materials and manufacturing methods have been explored to satisfy this demand. This paper...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
12 Citations
3,157 Views
14 Pages

Advanced Electrospun Composites Based on Polycaprolactone Fibers Loaded with Micronized Tungsten Powders for Radiation Shielding

  • Chiara Giuliani,
  • Ilaria De Stefano,
  • Mariateresa Mancuso,
  • Noemi Fiaschini and ,
  • Luis Alexander Hein,
  • Daniele Mirabile Gattia,
  • Elisa Scatena,
  • Eleonora Zenobi,
  • Costantino Del Gaudio and
  • Antonio Rinaldi
  • + 7 authors+ 2 authors

13 September 2024

Exposure to high levels of radiation can cause acute, long-term health effects, such as acute radiation syndrome, cancer, and cardiovascular disease. This is an important occupational hazard in different fields, such as the aerospace and healthcare i...

(This article belongs to the Special Issue Advances in Functional Polymers and Composites)
  • Article
  • Open Access
6 Citations
2,381 Views
14 Pages

13 September 2024

A series of partially bio-based and biodegradable poly(propylene terephthalate-co-adipate) (PPTA) random copolymers with different components were prepared by the melt polycondensation of petro-based adipic acid and terephthalic acid with bio-based 1...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
5 Citations
1,722 Views
12 Pages

Preparation and Performance of Leather-Finished Plywood

  • Yuanyuan Zou,
  • Ziyi Yuan,
  • Yuxin Lu,
  • Xiaoqian Liu and ,
  • Chuxuan Chen and
  • Lu Fang
  • + 1 author+ 0 author

13 September 2024

In order to achieve batch production, we propose a simple and fast method to prepare leather-finished plywood. In this study, ethylene–vinyl acetate was selected as the intermediate layer to prepare EVA/polyurethane (PU) leather composites. ESE...

(This article belongs to the Special Issue New Challenges in Wood and Wood-Based Materials III)
  • Article
  • Open Access
12 Citations
2,735 Views
20 Pages

Carboxyalkylated Lignin as a Sustainable Dispersant for Coal Water Slurry

  • Hussein Ahmad Qulatein,
  • Weijue Gao and
  • Pedram Fatehi

13 September 2024

Coal water slurry (CWS) has been considered a cleaner and sustainable alternative to coal. However, the challenging suspension of coal particles in CWS has created a major obstacle to its use in industry. This study presents a novel approach to enhan...

(This article belongs to the Collection Lignin)
  • Article
  • Open Access
8 Citations
1,797 Views
12 Pages

13 September 2024

The application of binary gas mixtures consisting of heptafluorobutyronitrile (C4F7N) and carbon dioxide (CO2) in AC GIS is currently attracting much attention. Therefore, the evaluation of the gas–solid interface charge distribution characteri...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
5 Citations
2,360 Views
15 Pages

13 September 2024

Microgel particles can play a key role, e.g., in drug delivery systems, tissue engineering, advanced (bio)sensors or (bio)catalysis. Amine-functionalized microgels are particularly interesting in many applications since they can provide pH responsive...

(This article belongs to the Special Issue Smart and Bio-Medical Polymers)
  • Review
  • Open Access
55 Citations
26,735 Views
18 Pages

Poly-d,l-lactic Acid (PDLLA) Application in Dermatology: A Literature Review

  • Kar Wai Alvin Lee,
  • Lisa Kwin Wah Chan,
  • Angela Wai Kay Lee,
  • Cheuk Hung Lee and ,
  • Sky Tin Hau Wong and
  • Kyu-Ho Yi
  • + 1 author+ 0 author

13 September 2024

Poly-d,l-lactic acid (PDLLA) is a biodegradable and biocompatible polymer that has garnered significant attention in dermatology due to its unique properties and versatile applications. This literature review offers a comprehensive analysis of PDLLA&...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
4 Citations
2,069 Views
13 Pages

12 September 2024

Atmospheric plasma jets generated from air or nitrogen using commercial sources with relatively high energy densities are commonly used for industrial applications related to surface treatments, especially to increase the wettability of polymers or t...

(This article belongs to the Special Issue Plasma Processing of Polymers, 2nd Edition)

of 3

XFacebookLinkedIn
Polymers - ISSN 2073-4360