Skip to Content

172 Results Found

  • Article
  • Open Access
3 Citations
1,728 Views
12 Pages

Study on Characteristics of Front Abutment Pressure and Rational Stop-Mining Coal Pillar Width in Large Height Working Face

  • Wei Yu,
  • Gangwei Fan,
  • Dongsheng Zhang,
  • Wenhao Guo and ,
  • Wenhui Zhang,
  • Shizhong Zhang and
  • Zhanglei Fan
  • + 2 authors+ 0 author

7 June 2024

The width of a stop-mining coal pillar is of great significance to the stability of the surrounding rock of the main roadway and the safety of production in the mine. This paper focuses on the west panel of Sihe Coal Mine as the engineering backgroun...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
6 Citations
1,062 Views
26 Pages

Study on the Width of a Narrow Coal Pillar for Gob-Side Entry Driving near an Advancing Working Face in a Shallow Coal Seam

  • Hu Zhang,
  • Yang Wen,
  • Wenda Wu,
  • Haipo Wen and ,
  • Yaotong Hu,
  • Bo Wang,
  • Jianqiang Shao,
  • Zhongwu Li and
  • Jianchun Niu
  • + 4 authors+ 0 author

13 August 2025

In response to the challenges of controlling surrounding rock deformation in gob-side entry driving towards the advancing working face, a systematic study on the stability of the headgate# 15107 and coal pillar section was conducted, using a combinat...

  • Article
  • Open Access
123 Views
17 Pages

26 October 2026

When a coal mining district enters its final mining stage, the coal resources in boundary areas usually present irregular shapes, and the width of section coal pillars varies with the working-face dimension. Therefore, the stability of section coal p...

(This article belongs to the Special Issue Backfill-Integrated Water-Conserving Green Mining Technology in Coal Mining)
  • Article
  • Open Access
8 Citations
2,763 Views
22 Pages

Study on the Fracture Law of Inclined Hard Roof and Surrounding Rock Control of Mining Roadway in Longwall Mining Face

  • Feng Cui,
  • Shuai Dong,
  • Xingping Lai,
  • Jianqiang Chen and ,
  • Chong Jia and
  • Tinghui Zhang
  • + 1 author+ 0 author

14 October 2020

In the inclination direction, the fracture law of a longwall face roof is very important for roadway control. Based on the W1123 working face mining of Kuangou coal mine, the roof structure, stress and energy characteristics of W1123 were studied by...

  • Article
  • Open Access
79 Citations
2,508 Views
19 Pages

Failure Characteristics and Cooperative Control Strategies for Gob-Side Entry Driving near an Advancing Working Face: A Case Study

  • Wenda Wu,
  • Tianchen Wang,
  • Jianbiao Bai,
  • Jinhu Liu and ,
  • Xiangyu Wang,
  • Haiyun Xu and
  • Guorui Feng
  • + 2 authors+ 0 author

4 July 2024

Gob-side entry driving near an advancing working face can improve the recovery rate of coal resources and keep the balance between mining and development. However, the large displacement of the gob-side entry caused by the mining dynamics of abutment...

(This article belongs to the Topic New Advances in Mining Technology)
  • Article
  • Open Access
6 Citations
1,646 Views
18 Pages

Reasonable Coal Pillar Width and Control Technology for Gob-Side Entry Driving in Deep Irregular Working Face

  • Shuaifeng Yin,
  • Xubo Zhao,
  • En Wang,
  • Yitao Yan and ,
  • Kanglei Han,
  • Jun Ma and
  • Yibo Wang
  • + 2 authors+ 0 author

6 January 2025

Aiming to address the challenges of determining the coal pillar’s width and managing the significant deformation of the surrounding rock in the deep gob-side entry driving, the limiting equilibrium zone theory, employing the operational area of...

(This article belongs to the Section Process Control, Modeling and Optimization)
  • Article
  • Open Access
7 Citations
2,703 Views
20 Pages

20 June 2022

The porosity distribution law of overlying strata in the goaf has an important guiding role in distinguishing hidden disaster-causing factors in the goaf, such as the gas enrichment area and spontaneous combustion area. Existing research is concentra...

  • Article
  • Open Access
112 Views
20 Pages

31 October 2026

Targeting the problem of surface subsidence caused by deep coal seam mining, using the 1210 panel of the Shilawusu Coal Mine as the background and based on field-measured surface subsidence data, a numerical model of mining-induced overburden behavio...

(This article belongs to the Section Petroleum and Low-Carbon Energy Process Engineering)
  • Article
  • Open Access
19 Citations
3,033 Views
11 Pages

31 March 2021

Longwall pier-column backfilling is a partial backfilling technique initially designed in thin coal seam mines. With the increase of mining intensity, the mining height and width of the backfilling working face will also increase. It is necessary to...

(This article belongs to the Section Earth Sciences)
  • Article
  • Open Access
3 Citations
1,691 Views
17 Pages

Non-Pillar Coal Mining by Driving Roadway During Mining Period in High-Gas Top-Coal-Caving Working Face

  • Haisheng Shen,
  • Zhongshun Chen,
  • Yong Yuan,
  • Bo Li and
  • Samuel Kofi Anamor

20 November 2024

To solve the problem of the inability to achieve Y-shaped ventilation in the boundary coal mining of high-gas mines and the problem of gas accumulation in the upper corner of a fully mechanized mining face, non-pillar coal mining technology is propos...

(This article belongs to the Special Issue Monitoring, Process Control, Simulation, and Optimization in Coal Mining)
  • Article
  • Open Access
6 Citations
2,158 Views
22 Pages

19 January 2024

Retaining a waterproof coal pillar is an important measure to defend against water inrush accidents in mining areas and guarantee the safe mining of the next working face. In this paper, the mechanical model of the coal pillar is established and the...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
1,300 Views
16 Pages

Automatic Gas Emission Width of Coal Bodies in the Goaf near Outbursting Coal Seams

  • Jian Xiao,
  • Ruiqing Bi,
  • Xuexi Chen,
  • Shugang Li and ,
  • Zhiheng Chen and
  • Jianglong Chen
  • + 1 author+ 0 author

1 March 2025

The influence of coal and gas outbursts from a coal seam adjacent to the working face is crucial for determining its automatic gas discharge width, which is an important basis for the roadway position design of the adjacent working face. This study f...

(This article belongs to the Special Issue Monitoring, Process Control, Simulation, and Optimization in Coal Mining)
  • Article
  • Open Access
4 Citations
1,912 Views
21 Pages

13 December 2023

Insufficient stability of the top plate at the corner of an easily combustible coal seam comprehensive mining face may lead to a natural fire within the goaf. While corner sealing is crucial for minimizing air leakage, current sealing methods struggl...

  • Article
  • Open Access
16 Citations
2,721 Views
32 Pages

Study on Regional Strata Movement during Deep Mining of Erdos Coal Field and Its Control

  • Guojian Zhang,
  • Zhiyang Wang,
  • Guangli Guo,
  • Wei Wei and ,
  • Fugang Wang,
  • Leilei Zhong and
  • Yaqiang Gong
  • + 2 authors+ 0 author

Disasters such as rock bursts and mine earthquakes became increasingly serious with the increase in mining depth in Erdos Coal Field and became serious problems that restrict high-strength continuous mining of coal mines. In this study, strata moveme...

(This article belongs to the Special Issue 2nd Edition of Mining and Environmental Health: Challenges and Opportunities)
  • Article
  • Open Access
14 Citations
2,932 Views
23 Pages

Study on the Evolution Law of Overlying Strata Structure in Stope Based on “Space–Air–Ground” Integrated Monitoring Network and Discrete Element

  • Yuanhao Zhu,
  • Yueguan Yan,
  • Yanjun Zhang,
  • Wanqiu Zhang and ,
  • Jiayuan Kong and
  • Anjin Dai
  • + 1 author+ 0 author

5 May 2023

The geological environmental damage caused by coal mining has become a hot issue in current research. Especially in the western mining area, the size of the mining working face is large, the mining intensity is high, while the surface movement and de...

(This article belongs to the Section Drone Communications)
  • Article
  • Open Access
2 Citations
1,218 Views
19 Pages

16 September 2025

This work aimed to address the severe deformation and uncontrollable instability of surrounding rocks in gob-side roadways of ultra-thick coal seams under intense mining disturbances. Theoretical analysis, numerical simulation, and field practice wer...

(This article belongs to the Special Issue Advances in Green Coal Mining Technologies)
  • Article
  • Open Access
7 Citations
2,024 Views
21 Pages

28 February 2024

A high static load state significantly increases the risk of rock burst occurrences on the island working face, posing a significant threat to the safety of coal mine production. This paper focused on the engineering background of the 8204-2 working...

(This article belongs to the Special Issue Advanced Underground Coal Mining and Ground Control Technology)
  • Article
  • Open Access
3 Citations
1,855 Views
20 Pages

22 July 2024

There are fewer studies on the width of coal pillar retaining under a thick, hard roof. This paper takes the thick limestone roof in the 10110 working face of Jinniu Coal Mine as the background, taking the reasonable coal pillar width and its stabili...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
2 Citations
1,925 Views
14 Pages

23 January 2024

The scientific and reasonable width of coal pillars is of great significance to ensure safe and sustainable mining in the western mining area of China. To achieve a precise analysis of the reasonable width of coal pillars in fully mechanized caving f...

(This article belongs to the Topic Mathematical Modeling and Numerical Simulation in Rock Mechanics and Mining Engineering)
  • Article
  • Open Access
234 Views
24 Pages

25 September 2026

In close-distance coal seam mining, the long-term static high-stress field induced by remnant pillars in the overlying goaf superimposes with the dynamic load disturbance from fully mechanized top-coal caving (TCC) in the underlying extra-thick seam....

  • Feature Paper
  • Article
  • Open Access
15 Citations
2,164 Views
17 Pages

11 August 2022

An advanced break or a vast region of pressurisation may occur when the working face passes through an abandoned roadway, resulting in a roof falling or water inrush. The stress evolution of the working face passing through an abandoned roadway in a...

(This article belongs to the Special Issue Volume II: Mining Innovation)
  • Article
  • Open Access
6 Citations
1,889 Views
15 Pages

Study on the Stability and Reasonable Width of Coal Pillars in “Three Soft” Coal Seams Based on a Physical Similarity Simulation Experiment

  • Tao Yang,
  • Yiming Zhang,
  • Jie Zhang,
  • Haifei Lin and ,
  • Ruoyu Bao,
  • Yifeng He,
  • Yihui Yan,
  • Pengkun Luo,
  • Haohao Wu and
  • Haibo Pang
  • + 6 authors+ 1 author

14 July 2024

As the depth of coal seams increases and the demand for coal grows, the deformation and failure of roadways and coal pillars also intensify. To address the instability of roadways, it is crucial to study the appropriate dimensions for coal pillars. T...

  • Article
  • Open Access
4 Citations
2,011 Views
12 Pages

Impact of the Mining Dimensions on the Stability of Backfilled Pier-Columns

  • Jianlin Xie,
  • Weibing Zhu,
  • Jialin Xu,
  • Xiaozhen Wang and
  • Limin Wang

15 October 2021

Owing to alternate mining of the new and old mining areas on sites, the mining thickness and width of the working face for pier-column backfilling varies. Thus, there is an urgent need to determine the impact on the bearing performance of the backfil...

  • Article
  • Open Access
7 Citations
1,972 Views
21 Pages

24 September 2024

The occurrence of rock bursts due to penetrating faults are frequent in China, thereby limiting the safe production of coal mines. Based on the engineering background of a 501 working face in a TB coal mine, this paper investigates stress and energy...

  • Article
  • Open Access
4 Citations
2,108 Views
20 Pages

28 October 2023

This study aims at the problems of the difficulty in controlling the stability of the surrounding rock and the high-impact danger of knife handle-type working face mining. We take the I010206 working face of Kuangou Coal Mine in Xinjiang as the engin...

(This article belongs to the Special Issue Mine Earthquake and Rock Burst Monitoring, Early Warning and Prevention)
  • Article
  • Open Access
4 Citations
925 Views
20 Pages

Risk Identification Method and Application of Roof Water Inrush Under Multi-Working Face Mining

  • Zhendi Huang,
  • Kun Wang,
  • Xuesheng Liu,
  • Yongqiang Zhao and ,
  • Xuebin Li,
  • Biao Fu and
  • Yu Zhou
  • + 2 authors+ 0 author

23 March 2025

Adjacent, multi-working face mining can expand the range of disturbed overburden, increasing the risk of triggering roof water inrush, which threatens the safe operation of coal mines. In this paper, we propose a risk identification method for roof w...

(This article belongs to the Section Energy Science and Technology)
  • Article
  • Open Access
22 Citations
2,841 Views
20 Pages

Recovery Technology of Bottom Coal in the Gob-Side Entry of Thick Coal Seam Based on Floor Heave Induced by Narrow Coal Pillar

  • Kai Wang,
  • Yanli Huang,
  • Huadong Gao,
  • Wen Zhai and ,
  • Yongfeng Qiao,
  • Junmeng Li,
  • Shenyang Ouyang and
  • Wei Li
  • + 3 authors+ 0 author

1 July 2020

To improve the resource recovery efficiency of mining face in thick coal seams, the correlation between deformation failure of bottom coal in the gob-side entry and coal pillar width was analyzed by theoretical analysis, numerical calculation, and si...

  • Article
  • Open Access
6 Citations
2,543 Views
16 Pages

The Optimization of Coal Pillars on Return Air Sides and the Reasonable Horizon Layout of Roadway Groups in Highly Gassy Mines

  • Qi Ma,
  • Yidong Zhang,
  • Linsheng Gao,
  • Zexin Li and ,
  • Guangyuan Song and
  • Yu Zheng
  • + 1 author+ 0 author

1 August 2022

Multiple roadways are opened to solve the difficulties in gas control in the high seam working face of high gassy mines, resulting in a large width of coal pillars between roadway groups. Moreover, recovering coal pillars is challenging during stopin...

(This article belongs to the Collection Sustainable Development of Coal Based Energy: Technology, Environment, Humanities, Economy, and Education)
  • Article
  • Open Access
7 Citations
1,679 Views
14 Pages

28 June 2023

The internal overburden movement after coal mining may cause many disasters to the on-site production. It is of great guiding significance for the engineering treatment such as separation layer grouting and gas extraction to master the evolution law...

  • Article
  • Open Access
17 Citations
2,841 Views
17 Pages

Study on Evolution of Front Abutment Pressure at Working Face in Repeated Mining of Close-Distance Coal Seams

  • Fulian He,
  • Liang Li,
  • Kai Lv,
  • Binbin Qin and ,
  • Xuhui Xu,
  • Qing Ma and
  • Yongqiang Chen
  • + 2 authors+ 0 author

29 September 2022

In order to determine the reasonable width of a stopping coal pillar in close-distance coal seams, the evolution law of front abutment pressure of the working face with repeated mining was studied. Based on the actual engineering project, we conducte...

(This article belongs to the Special Issue Sustainable and Responsible Development of Minerals, Safety-Driven Mining Operations, Digital Mining, Critical Minerals)
  • Article
  • Open Access
6 Citations
1,588 Views
16 Pages

31 December 2024

The rational coal pillar width directly improves the utilization rate of coal resources and the safety of coal mines. Taking Jinjitan Coal Mine as the engineering background, using theoretical analysis and calculation through numerical simulation, th...

  • Article
  • Open Access
3 Citations
1,563 Views
19 Pages

12 October 2023

The low-gas permeability area of a fully mechanized up-dip working face was quantitatively studied using a physical similarity simulation test and theoretical analysis under varying dip angles of rock strata. Based on the theory of fractal geometry,...

(This article belongs to the Section H: Geo-Energy)
  • Article
  • Open Access
35 Citations
3,705 Views
17 Pages

Stability Analysis of Roadway Groups under Multi-Mining Disturbances

  • Yuantian Sun,
  • Ruiyang Bi,
  • Qingliang Chang,
  • Reza Taherdangkoo and ,
  • Junfei Zhang,
  • Junbo Sun,
  • Jiandong Huang and
  • Guichen Li
  • + 3 authors+ 0 author

28 August 2021

The roadway stability has been regarded as the main challenging issue for safety and productivity of deep underground coal mines, particularly where roadways are affected by coal mining activities. This study investigates the −740 m main roadway in t...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
9 Citations
2,918 Views
18 Pages

The Stability of Roadway Groups under Rheology Coupling Mining Disturbance

  • Sen Yang,
  • Guichen Li,
  • Ruiyang Bi,
  • Bicheng Yao and ,
  • Ruiguang Feng and
  • Yuantian Sun
  • + 1 author+ 0 author

8 November 2021

The deep roadway groups play an important role in transportation and ventilation in coal mine production. Therefore, it is very important to comprehensively analyze the coupling effect of rheological deformation and coal mining on the stability of th...

(This article belongs to the Special Issue Advances in Rock Mechanics and Geotechnical Engineering)
  • Article
  • Open Access
4 Citations
663 Views
17 Pages

1 March 2026

This paper presents the development and results of an analytical method for calculating the stability coefficient of a rock mass that is capable of adjusting the face support pressure required for face stability depending on changes in the mass struc...

(This article belongs to the Section Chemical, Civil and Environmental Engineering)
  • Article
  • Open Access
7 Citations
3,138 Views
13 Pages

2 December 2022

Structurally and functionally integrated materials usually face the problem of serious functional degradation after large deformation or fracture, such as load-bearing and thermal insulation integrated lattice. In this work, the lattice with a big wi...

(This article belongs to the Special Issue 3D Printed Functional Lattice Structures)
  • Article
  • Open Access
3 Citations
2,252 Views
22 Pages

Analysis of Filler Metals Influence on Quality of Hard-Faced Surfaces of Gears Based on Tests in Experimental and Operating Conditions

  • Svetislav Marković,
  • Vukić Lazić,
  • Dušan Arsić,
  • Ružica R. Nikolić and ,
  • Djordje Ivković,
  • Robert Ulewicz and
  • Otakar Bokuvka
  • + 2 authors+ 0 author

4 November 2022

Hard-facing as a type of the coating depositing is increasingly used today. Physical-chemical-metallurgical characteristics of contact layers in tribo-mechanical systems depend on the operating conditions and the conditions under which the work surfa...

(This article belongs to the Special Issue Quality, Microstructure and Properties of Metal Alloys)
  • Article
  • Open Access
18 Citations
2,560 Views
15 Pages

Fractal Characteristics of Overburden Rock Fractures and Their Impact on Ground Fissures in Longwall Coal Mining

  • Chunwei Ling,
  • Bin Liu,
  • Cun Zhang,
  • Teng Teng and ,
  • Kangning Zhang,
  • Bo Sun and
  • Jinlong Zhou
  • + 2 authors+ 0 author

Ground fissures are generated during the coal mining process due to overlying strata migration, which provides gas and water seepage channels and usually contributes to coal mining accidents in shallow buried coal seams with larger mining height work...

(This article belongs to the Special Issue Applications of Fractal Analysis in Underground Engineering)
  • Article
  • Open Access
7 Citations
2,505 Views
16 Pages

Study on Stability Discrimination Technology of Stope Arch Structure

  • Quansheng Li,
  • Yanjun Zhang,
  • Yongqiang Zhao,
  • Yuanhao Zhu and
  • Yueguan Yan

5 September 2022

The stress of rock strata changes under mining action, and the arch structure will be formed around the mining area. The stability study of the arch structure has crucial scientific value for solving the problems of stope pressure and surface subside...

(This article belongs to the Special Issue Sustainable and Responsible Development of Minerals, Safety-Driven Mining Operations, Digital Mining, Critical Minerals)
  • Article
  • Open Access
1,802 Views
30 Pages

15 October 2025

Indexable face milling tools are often used to machine workpieces with large axial and radial depth of cuts, and thus, the inserts quickly wear out in machining. A kernel technique of smart machining is tool wear compensation, which is to regularly a...

(This article belongs to the Special Issue Advanced Micro- and Nano-Manufacturing Technologies, 2nd Edition)
  • Article
  • Open Access
6 Citations
1,874 Views
14 Pages

Research on the Influence of Process Parameters on the Flow Field in Mold

  • Fengming Du,
  • Jian Zhao,
  • Yue Zheng,
  • Tianyi Li and
  • Gengtao Zheng

14 October 2022

The mold is one of the core components of steelmaking, and its flow field distribution will directly affect the quality of the casting slab. A three-dimensional nozzle model is built in this work, and fluid simulation is carried out to investigate th...

(This article belongs to the Special Issue Liquid–Fluid Interfaces and Dynamics)
  • Article
  • Open Access
4 Citations
515 Views
24 Pages

Deformation Characteristics and Breakage Mechanism of Thick-Hard Roof Based on a Medium-Thick Plate Mechanical Model

  • Zhengzheng Cao,
  • Yi Xiong,
  • Yufeng Xue,
  • Desheng Zhu and ,
  • Guosheng Li,
  • Youlin Xu,
  • Teng Teng and
  • Yi Xue
  • + 3 authors+ 0 author

31 July 2026

To solve the whole cutting-off and large-area weighting of thick-hard roof led by the high-intensity mining in working face, the mechanical mechanism of the impact pressure of thick-hard top working face in the Shendong mining area is studied. The th...

(This article belongs to the Section Petroleum and Low-Carbon Energy Process Engineering)
  • Article
  • Open Access
372 Views
29 Pages

Coal Pillar Width Determination and Roof Full-Cable Support Technology for Gob-Side Entry Driving in Extra-Thick Coal Seams

  • Yu Kang,
  • Baisheng Zhang,
  • Dong Duan,
  • Shuaiyou Ji and ,
  • Zhechong Liang and
  • Longbo Du
  • + 1 author+ 0 author

18 May 2026

To determine a reasonable coal pillar width for gob-side entry driving in extra-thick coal seams and improve roof control under thick top-coal conditions, the No. 50604 return airway of Ti’an Coal Mine was selected as the engineering case. A co...

(This article belongs to the Special Issue Sustainable Development of the Coal Industry: Process Safety and Environmental Protection)
  • Article
  • Open Access
2 Citations
617 Views
23 Pages

5 March 2026

To address the problems of strong roof integrity, severe energy accumulation, and difficult caving in thick and hard roofs, a three-dimensional numerical study on fracture propagation and pressure-relief control durisng segmented hydraulic fracturing...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
265 Views
32 Pages

Study on Overlying Strata Bearing Characteristics of Mining via Strip Slice Filling for Super-Thick Isolated Working Face Coal Seams

  • Huisheng Qu,
  • Dengdeng Zhuang,
  • Lang Liu,
  • Chen Huang and ,
  • Jiangbo Wei,
  • Ermeng Zhang,
  • Zhenmin Luo and
  • Tiantian Li
  • + 3 authors+ 0 author

14 August 2026

In this study, to address the overlying strata control issue for the isolated working face of a super-thick coal seam confined by surrounding goafs and open-pit boundaries, we focus on mining via upward slicing strip paste filling in a Ningxia coal m...

  • Article
  • Open Access
34 Citations
4,506 Views
30 Pages

Study on Three-Dimensional Stress Field of Gob-Side Entry Retaining by Roof Cutting without Pillar under Near-Group Coal Seam Mining

  • Xiaoming Sun,
  • Yangyang Liu,
  • Junwei Wang,
  • Jiangbing Li and ,
  • Shijie Sun and
  • Xuebin Cui
  • + 1 author+ 0 author

22 August 2019

In order to explore the distribution law of stress field under the mining mode of gob-side entry retaining by roof cutting without pillar (GERRCP) under goaf, based on the engineering background of 8102 and 9101 working faces in Xiashanmao coal mine,...

(This article belongs to the Special Issue Advances in Condition Monitoring, Optimization and Control for Complex Industrial Processes)
  • Article
  • Open Access
16 Citations
2,501 Views
24 Pages

Study on the Influence and Control of Stress Direction Deflection and Partial-Stress Boosting of Main Roadways Surrounding Rock and under the Influence of Multi-Seam Mining

  • Dongdong Chen,
  • Fangfang Guo,
  • Zijian Li,
  • Xiang Ma and ,
  • Shengrong Xie,
  • Yiyi Wu and
  • Zhiqiang Wang
  • + 2 authors+ 0 author

4 November 2022

A large coal pillar (usually more than 90 m) is generally left in place to ensure the stability of main roadway groups, due to its long service lifespan, which commonly also causes a significant loss of coal resources. The design of the width of the...

(This article belongs to the Special Issue Method and Technology of Green Coal Mining)
  • Article
  • Open Access
151 Views
22 Pages

Coal Extraction Beneath Buildings: Mining Parameters and Surface Subsidence Control Using Three-Roadway Continuous Mining and Backfilling

  • Jiaotao Xu,
  • Xiangling Li,
  • Shizhong Zhang,
  • Tieliang An and ,
  • Gangwei Fan,
  • Zihan Kong,
  • Shaodong Li and
  • Ziquan Wu
  • + 3 authors+ 0 author

14 October 2026

With the gradual depletion of high-quality and readily mineable coal resources, recovering coal beneath buildings while controlling surface subsidence is important for sustainable resource development and protection of surface structures. Using the 1...

(This article belongs to the Section Resources and Sustainable Utilization)
  • Article
  • Open Access
5 Citations
1,468 Views
24 Pages

Characteristics of Overlying Rock Breakage and Fissure Evolution in the Mining of Extra-Thick Coal Seams in Anticline Structural Area

  • Jun Wang,
  • Shibao Liu,
  • Xin Yu,
  • Haoyuan Gu and ,
  • Huaidong Liu and
  • Changyou Liu
  • + 1 author+ 0 author

9 August 2025

To reveal the fracture mechanism of overburden aquifers during mining under anticlinal structural zones in western mining areas, this study takes Panel 1309 of the Guojiahe Coal Mine as the engineering background and employs field investigations, phy...

(This article belongs to the Special Issue Novel Research on Rock Mechanics and Geotechnical Engineering)
  • Article
  • Open Access
6 Citations
1,516 Views
18 Pages

10 March 2025

This study investigates the traditional coal pillar support methods employed in double-roadway excavation of high-mining-height longwall faces, specifically those with widths ranging from 20 m to 30 m. It highlights that these methods not only result...

of 4