The metamorphic sole, tectonically welded to the base of the Samail ophiolite in a supra-subduction system, is assumed to play the main role in strain accumulation during later thrusting onto the Arabian Plate (i.e., during obduction). The present st...
This work was conducted in order to validate a pre-treatment quantitative ultrasound (QUS) and texture derivative analyses-based prediction model proposed in our previous study to identify responders and non-responders to neoadjuvant chemotherapy in...
Wooden breast (WB), white striping (WS) and spaghetti meat (SM) are breast myopathies of the Pectoralis major that greatly affect meat quality in broilers. To differentiate color and texture characteristics with instrumental methods, some of them app...
Small objects of an alloy tool steel were built by selective laser melting at different scan speeds, and their microstructures were analyzed using electron backscatter diffraction (EBSD). To present an explicit correlation with the local thermal cycl...
In any hydraulic machine there are lubricated couplings that could become critical beyond certain operating conditions. This paper presents the simulation results concerning textured surfaces with the aim of improving the performance of lubricated co...
Textural characteristics of fruit are important for their quality, storability, and consumer acceptance. While texture can be evaluated instrumentally or sensorially, instrumental measurements are preferred if they can be reliably related to human pe...
This study presents a comparison of data acquired from three LiDAR sensors from different manufacturers, i.e., Yellow Scan Mapper (YSM), AlphaAir 450 Airborne LiDAR System CHC Navigation (CHC) and DJI Zenmuse L1 (L1). The same area was surveyed with...
Regulation of fruit ripening is one of the most important topics in postharvest storage. Effects of 1-methylcyclopropene (1-MCP) greatly depend on the responsiveness of fruit cultivar to this molecule. Although 1-MCP has been used in postharvest pres...
During ecological restoration, it is necessary to comprehensively consider the state of vegetation in climate–soil–vegetation systems. The theory of ecohydrological optimality assumes that this state tends to reach long-term dynamic equilibrium betwe...
Organoleptic properties and nutritional value are the most important characteristics of fish fillet quality, which can be determined by a series of quality evaluation indexes and closely related to fish nutrition. Systematic organoleptic and nutritio...
Botrytis cinerea is a well-known pathogen of grapevine. However, under certain microclimatic conditions, Botrytis infection results in noble rot, an essential process in the production of the world-known Tokaji aszú wines in Hungary. We invest...
Background: Marginal bone loss (MBL) is a condition leading to implant loss and treatment failure. MBL is one of the main complications in dental implantology. The aim of this research is to show the method that can predict bone loss around implants...
Increasing consumption of apples (Malus domestica Borkh.) produced in Norway requires the availability of superior cultivars and extended marketability. Favorable texture and slow softening are important traits for consumer appreciation and postharve...
The purpose of this paper is to investigate the variation in the coefficient of friction (CoF) and also the wear in a lead bronze coating under different texture conditions. The tribological tests were performed using a tribometer with pin on disk co...
Pavement texture characteristics can reflect early performance decay, skid resistance, and other information. However, most statistical texture indicators cannot express this difference. This study adopts 3D image camera equipment to collect texture...
Reduced-fat products can help to fight obesity and its associated health risks. To develop appealing products, both product-specific fat replacers and suitable analytical methods for the characterization of fat-associated properties are important. Th...
Bakery products are an important sector of the food industry globally and are part of the regular diets of many people. Texture encompasses many product characteristics and plays a pivotal role in consumer acceptance. This review focuses on the studi...
The study focuses on structure analyses, texture analyses in particular, of an Al/Cu clad composite manufactured by single and double pass of the twist channel angular pressing (TCAP) method. Microscopic analyses were supplemented with numerical pred...
Background: The objective of this systematic review was to summarize the findings of texture analyses of musculoskeletal ultrasound images and synthesize the information to facilitate the use of texture analysis on assessing skeletal muscle quality i...
This research was performed on marketed table olives. We investigated possible correlations among textural parameters obtained using both sensory assessment and instrumental textural analysis. The purpose of this research study was to find out any po...
A Nd-YAG laser was used for texturing the Ti6Al4V surface with dimples of diameter 50 and 100 µm and centre-to-centre distance 100, 200 and 400 µm, defining the surface texture density. The tribological evaluation was conducted to analyse...
Surface texturing is used in many applications to control the friction and wear behaviour of mechanical components. The benefits of texture design on the tribological behaviour of conformal surfaces are well known. However, there is a big dependency...
Area-based analyses of airborne laser scanning (ALS) data are an established approach to obtain wall-to-wall predictions of forest characteristics for vast areas. The analyses of sparse data in particular are based on the height value distributions,...
Beef aging is one of the most common methods used for improving its qualities. The main goal of the present study was to analyse the influence of different cold pressed oils and aromatic herbs during marination process on the nutritional, textural, a...
This research investigates the generation and evaluation of various geometric surface textures on PLA components produced via fused filament fabrication (FFF). Textures, including grooves, pyramids, and cylinders, were created at different depth leve...
This paper reports on an investigation of crystallographic texture of as-built and heat-treated Ti6Al4V (ELI) produced by direct metal laser sintering (DMLS). The texture analyses were conducted using electron backscatter diffraction (EBSD). The &bet...
Palmero cheese is an artisanal dairy product from the Canary Islands (Spain), awarded with the Protected Denomination of Origin (PDO) from the European Union. It is made with raw milk from the Palmera dairy goat on La Palma island. The aim of this re...
Okara, a fiber-rich soybean byproduct, can improve the sustainability of plant-based meats but may compromise texture when used at high levels. This study investigated the effects of okara flour (0–40%) on the structure–function relations...
Mass flow inequality in the initial stage of tube processing can lead to eccentricity and micro- and nano-structural changes that affect residual stress and texture development. In this study, the macro- and micro-texture development of copper tubes...
The analyses of texture evolution of cold rolled interstitial free (IF) steel sheets during annealing and recrystallization are presented, in which the dispersion curves of surface acoustic waves (SAW) excited by laser-induced transient thermal grati...
Biobased raw materials like natural polysaccharides are increasingly sought by the cosmetic industry for their valuable properties. Such biodegradable and usually non-cytotoxic biopolymers are commonly used in skin-care products as rheological modifi...
The texture of fresh jujube fruit is related to its popularity and commercial value. The metabolic networks and essential genes that regulate the texture of jujube (Ziziphus jujuba) fruit are still unknown. In this study, two jujube cultivars with si...
This paper explores the influence of micro textures on cutting performance of polycrystalline cubic boron nitride (PCBN) tools from two aspects, that is, tool wear and machined surface roughness. By designing micro-hole textures with different forms...
The surface texture parameter is a real reflection of the surface topography, which is closely related to the tribological properties of the surface, and the study of the correlation between the surface texture parameter and wear resistance is of gre...
The objective of this study was to determine the structural and textural description of municipal solid waste incineration (MSWI) bottom ash that was subjected to a six-month seasoning process. Bottom ash samples, with a particle size fraction of 0.0...
An accurate 3D pose estimation of spherical objects remains challenging in industrial inspections and robotics due to their geometric symmetries and limited feature discriminability. This study proposes a texture-optimized simulation framework to enh...
Food texture plays a critical role in influencing an individual’s perceived satiation and ad libitum intake. It remains unclear, however, whether such textural changes can also affect snack consumption. This study aimed to address this question...
Gluten-free baked goods exhibit reduced texture and taste characteristics compared to their gluten-containing counterparts. As a result, there is a renewed interest in the fermentation of gluten-free cereals with lactic acid bacteria, which is associ...
Botrytis cinerea, can lead to the formation of noble rot (NR) of grape berries under certain environmental conditions, resulting in favored metabolic and physical changes necessary for producing highly regarded botrytized wines. The functional genes...
Two-process random textures seem to present better functional properties than one-process surfaces. There are many random two-process textures. Plateau-honed cylinder surfaces are the most popular example. Two-process surfaces are also created during...
In this paper, we assess changes in CT texture of metastatic liver lesions after treatment with chemotherapy in patients with pancreatic cancer and determine if texture parameters correlate with measured time to progression (TTP). This retrospective...
The aim of this study was to develop a chilled, texture-modified salmon product for dysphagia patients, enriched with dairy and fish hydrolysate proteins. The challenge was to create a product with appealing sensory qualities and texture that meets l...
This paper presents an experimental study of uniform and variable texture patterns on a honed EN-GJS 400-15 spheroidal graphite cast iron surface. Textured samples were fabricated using a CNC electrochemical jet machining technique and tested against...
This review focuses on a set of studies about functional bakery products. The literature search was performed on scientific databases ScienceDirect, PubMed, MDPI, BOn, and SciELO, based on some eligibility criteria, and a total of 102 original resear...
Interstitial free (IF) steel is widely used in the automotive industry, due to its excellent deep drawing performance. In this study, in order to study the influence of different rolling processes on the texture evolution and deep drawing performance...
In cycling, a wide range of ergogenic foods with a variety of flavours, shapes, and textures are available. The timing of their consumption and their correct oral processing can influence the performance of athletes. Furthermore, the differences in t...
Technological meat quality and sensory attributes of fresh and frozen lamb meat were compared. Samples were collected from two abattoirs (one small-scale, one large-scale) that use different slaughter methods in terms of chilling regime and electrica...
This study aims to evaluate the utility of texture analysis in predicting the outcome of stereotactic radiosurgery (SRS) for brain metastases from lung cancer. From 83 patients with lung cancer who underwent SRS for brain metastasis, a total of 118 m...
This study investigates the potential of object-based texture parameters extracted from 15m spatial resolution ASTER imagery for estimating tree size diversity in a Mediterranean forested landscape in Turkey. Tree size diversity based on tree basal a...
This paper studies micro structure fabrication by means of a textured tool cutting edge, which is manufactured by applying the wire cut electrical discharge machining (WEDM). Machining performance of the square structure fabrication on the tool cutti...
of 25