In the work of this contribution, two kinetics models have been employed to assess the boron diffusivities in nickel borides in case of Inconel 718 alloy. The first approach, named the alternative diffusion model (ADM), used the modified version of m...
The plasma paste boriding process was used for production of the borided layers on pure nickel and nickel-chromium alloys. The produced layers consisted of nickel borides only (in the case of nickel) or a nickel and chromium borides mixture (in the c...
Layers of iron–nickel Fe-Ni-B-type borides were produced on C45 steel using a new hybrid treatment variant which combines boriding under glow discharge conditions with galvanic nickel precoating. The aim was to investigate whether these layers...
Amines play an important role in synthesizing drugs, pesticides, dyes, etc. Herein, we report on an efficient catalyst for the general construction of amine mediated by nickel boride nanoclusters supported by a TS-1 molecular sieve. Efficient product...
This study presents new results on the practical adhesion behavior of a boride layer formed on Monel 400 alloy, developed using the powder-pack boriding (PPBP) at 1223 K for 2, 4, and 6 h of exposure times, obtaining layer thicknesses from approximat...
We demonstrate synthesis of the ternary intermetallic MgNi3B2 using autogenous pressure from the reaction of NaBH4 with Mg and Ni metal powder. The decomposition of NaBH4 to H2 and B2H6 commences at low temperatures in the presence of Mg and/or Ni an...
The study investigated the dependence of the indentation load on nanomechanical properties for a gas-borided layer produced on Inconel 600-alloy. During the measurements, the indentation load range from 10 mN to 500 mN was used. Three types of tested...
Crystalline Ni2B, Ni3B, and Ni4B3 are synthesized by a single-step method using autogenous pressure from the reaction of NaBH4 and Ni precursors. The effect of reaction temperature, pressure, time, and starting materials on the composition of synthes...
Plasma paste boriding was employed in order to produce the boride layers on Nimonic 80A-alloy. The process was carried out at temperatures of 1023 K, 1073 K and 1123 K for 3, 4 and 6 h in a gas mixture of 50% H2-50% Ar. Borax paste was used as a boro...
This study examines the formation of hard layers containing Ni-B and Cr-B on the surface of 80/20 nickel–chromium alloy. The work evaluates the mechanical properties of the boride layers using instrumented nanoindentation. In addition, the grow...
Laser boriding is a surface treatment that involves the simultaneous re-melting and mixing of the alloying material, containing amorphous boron blended with diluted polyvinyl alcohol, with the substrate material (Nimonic 80A-alloy). As a result of hi...
A novel fourth-generation nickel-based single crystal superalloy was brazed with Co-based filler alloy. The effects of post-weld heat treatment (PWHT) on the microstructure and mechanical properties of brazed joints were investigated. The experimenta...
Nickel boride compounds have attracted considerable attention in the field of electrocatalysis due to their unique electronic structures and excellent chemical stability. However, the difficulty in obtaining single-phase products under traditional ex...
Transition metal-based catalysts designed for efficient urea oxidation reactions (UOR) are essential for hydrogen production via urea-assisted water electrolysis. A series of amorphous nickel–cobalt boride catalysts supported on nickel foam wer...
Austenitic 316L stainless steel has been the most widely acceptable biomaterial for producing implants. The downside of this material includes the leaching of nickel ions from the matrix that limits its’ usage in implant manufacturing. In this...
Development of welding consumables with fluorides and borides of rare earth metals is a promising area for improving the weldability of low alloy steels. As lanthanum fluoride and boride dissociate, lanthanum and boron dissolve in the weld pool and t...
Solid-state composites based on sodium borohydride (NaBH4) were studied for applications as hydrogen generation materials. Hydrates of cobalt and nickel chlorides subjected to a thermal treatment were added to the composites as catalyst precursors. U...
In an effort to develop new antibacterial drugs, some novel bisindolylmethane derivatives containing Schiff base moieties were prepared and screened for their antibacterial activity. The synthesis of the bisindolylmethane Schiff base derivatives 3–26...
The corrosion behavior of 316L stainless steel joints brazed with three commercial nickel-based filler metals (Ni-7Cr-2.8B-4.5Si, Ni-14.3Cr-3.5B, and Ni-18.5Cr-9.8Si) was comparatively investigated. The B-containing joints form dispersed CrB-type bor...
The dissimilar joining of martensitic and ferritic stainless steels have been developed that needs corrosion resistance and enhanced mechanical properties. In this study, the transient liquid-phase bonding of martensitic stainless steel 410 and super...
For the first time, using optical, scanning, and transmission electron microscopy and X-ray phase analysis in combination with measurements of tensile mechanical properties, we obtained data on the structural features of the polycrystalline shape-mem...
Nickel-based Ni-Cr-Si-B self-fluxing alloys are excellent candidates to replace cobalt-based alloys in aeronautical components. In this work, metal additive manufacturing by directed energy deposition using a laser beam (DED-LB, also known as LMD) an...
The damaged K465 nickel-based superalloy parts were repaired by laser forming repair technology. The cracking characteristics and grain boundary liquation in heat affected zones were investigated by optical microscopy (OM), scanning electron microsco...
Nickel-based superalloys are particularly suitable for applications under corrosive conditions. Economic advantages can be achieved by limiting the use of materials to the surface region. Furthermore, the tribological property profile can be signific...
Laser cladding technology is an effective method for producing wear-resistant coatings on damaged substrates, improving both wear and corrosion resistance, which extends the service life of components. However, the fabrication of hard and brittle mat...
Electroless nickel-boron coatings were deposited from a novel deposition bath that was stabilizer-free. Those coatings were analyzed by DSC to determine the crystallization temperature of nickel-boride phases, and then the best heat treatment conditi...
Trace elements such as boron (B) and zirconium (Zr) can increase creep resistance in nickel-based superalloys. This study investigates the change of microstructures on the grain boundary (GB) in phase-controlled nickel-based superalloys through the a...
The brazing of structural high-temperature-resistant nickel alloys is a predominant method in manufacturing jet engines in the aircraft industry. Ni-Cr-base brazing filler metals (BFMs) containing B and Si as the melting point depressants are used fo...
The knowledge of alloy–process–structure–property relationships is of particular interest for several safety-critical brazed components and requires a detailed characterization. Thus, three different nickel-based brazing filler metals were produced w...
In additive manufacturing, controlling hot cracking in non-weldable nickel-based superalloys poses a significant challenge for forming complex components. This study introduces a multiple preheating process for the forming surface in electron beam po...
Austenitic 316L stainless steel is known for its good resistance to corrosion and oxidation. However, under conditions of appreciable mechanical wear, this steel had to demonstrate suitable wear protection. In this study, laser surface alloying with...
In this study, we investigated the electronic properties and selective adsorption for CO2 of nickel boride clusters (NiB)n, (n = 1~10) using the first principles method. We optimized the structures of the clusters and analyzed their stability based o...
This paper investigates the friction process between an Fe-based coating and C45 steel with surface-active lubrication, as well as examines the coating surface before and after tribological testing. As a result, it is possible to determine whether th...
In this work, the characterization of the assembly of a steel shaft into a γ-TiAl part for turbocharger application, obtained using Electron Beam Welding (EBW) technology with a Ni-based filler, was carried out. The Ti-48Al-2Nb-0.7Cr-0.3Si (at %) all...
The purpose of this work is to study the effect of heat treatments on the microstructure of the nickel-based superalloy Inconel 713C. Three different conditions were studied and the results compared: (1) as cast; (2) solid solution treatment (1179 &d...