Skip to Content

880 Results Found

  • Article
  • Open Access
2 Citations
1,421 Views
15 Pages

Molecular Dynamics Study on the Nature of near Miscibility and the Role of Minimum Miscibility Pressure Reducer

  • Feng Liu,
  • Shengbing Zhang,
  • Jiale Zhang,
  • Zhaolong Liu and ,
  • Yonghui Chen and
  • Shixun Bai
  • + 1 author+ 0 author

14 February 2025

Gas miscible flooding, especially CO2 miscible flooding, is a key method for enhanced oil recovery. However, the high Minimum Miscibility Pressure (MMP) often makes true-miscible flooding impractical. A number of studies confirm the existence of a ne...

(This article belongs to the Special Issue Quantitative Evaluation, Efficient Development, Seepage, and Simulation of Geo-Energy Resources)
  • Article
  • Open Access
68 Citations
10,812 Views
10 Pages

16 July 2021

Designing polymer structures and polymer blends opens opportunities to improve the performance of plastics. Blending poly(butylene adipate-co-terephthalate) (PBAT) and polylactide (PLA) is a cost-effective approach to achieve a new sustainable materi...

(This article belongs to the Special Issue Advances in Biocompatible and Biodegradable Polymers)
  • Article
  • Open Access
9 Citations
3,532 Views
12 Pages

Miscibility Regimes in a 23Na–39K Quantum Mixture

  • Emmanuel Mercado Gutierrez,
  • Gustavo Alves de Oliveira,
  • Kilvia Mayre Farias,
  • Vanderlei Salvador Bagnato and
  • Patricia Christina Marques Castilho

29 September 2021

The effects of miscibility in interacting two-component classical fluids are relevant in a broad range of daily applications. When considering quantum systems, two-component Bose–Einstein condensates provide a well-controlled platform where the misci...

(This article belongs to the Special Issue Quantum Degenerate Atomic Mixtures)
  • Article
  • Open Access
37 Citations
6,115 Views
17 Pages

23 May 2019

CO2 flooding is an important method for improving oil recovery for reservoirs with low permeability. Even though CO2 could be miscible with oil in regions nearby injection wells, the miscibility could be lost in deep reservoirs because of low pressur...

(This article belongs to the Special Issue CO2 EOR and CO2 Storage in Oil Reservoirs)
  • Article
  • Open Access
24 Citations
6,092 Views
13 Pages

26 October 2021

Blends of poly(butylene adipate-co-terephthalate) (PBAT) and polylactide (PLA) have attracted the attention of academia and industry as a sustainable material. Unfortunately, this combination results in problems related to poor miscibility on the mol...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
15 Citations
4,920 Views
14 Pages

16 December 2021

Coaxial electrospinning (co-electrospinning) technique has greatly expanded the universality of fabricating core-shell polymer nanofibers. However, the effect of solution miscibility on the morphology of co-electrospun products remains unclear. Herei...

(This article belongs to the Section Polymer Fibers)
  • Article
  • Open Access
164 Citations
13,618 Views
17 Pages

31 October 2020

Polymer blends of poly(butylene adipate-co-terephthalate) (PBAT) and polylactide (PLA) have been drawn attention due to the application potential as packaging or agricultural films. This study aims to determine the manufacturability, miscibility and...

(This article belongs to the Special Issue Synthesis, Properties and Applications of Polymer Blends)
  • Article
  • Open Access
19 Citations
6,186 Views
10 Pages

Miscibility and Phase Separation in PMMA/SAN Blends Investigated by Nanoscale AFM-IR

  • Julia Resch,
  • Julia Dreier,
  • Christian Bonten and
  • Marc Kreutzbruck

4 November 2021

The miscibility and phase separation of poly(methyl methacrylate) (PMMA) and styrene-acrylonitrile (SAN) have already been investigated using various methods. However, these methods have limitations that often result in inconsistent characterization....

(This article belongs to the Special Issue Reviews on Progress in Polymer Processing and Performance)
  • Review
  • Open Access
76 Citations
9,923 Views
33 Pages

Analytical and Computational Methods for the Estimation of Drug-Polymer Solubility and Miscibility in Solid Dispersions Development

  • Djordje Medarević,
  • Jelena Djuriš,
  • Panagiotis Barmpalexis,
  • Kyriakos Kachrimanis and
  • Svetlana Ibrić

The development of stable solid dispersion formulations that maintain desired improvement of drug dissolution rate during the entire shelf life requires the analysis of drug-polymer solubility and miscibility. Only if the drug concentration is below...

(This article belongs to the Special Issue Recent Progress in Solid Dispersion Technology)
  • Article
  • Open Access
13 Citations
4,965 Views
21 Pages

Poly(etheretherketone)/Poly(ethersulfone) Blends with Phenolphthalein: Miscibility, Thermomechanical Properties, Crystallization and Morphology

  • Adrian Korycki,
  • Christian Garnier,
  • Amandine Abadie,
  • Valerie Nassiet and ,
  • Charles Tarek Sultan and
  • France Chabert
  • + 1 author+ 0 author

1 May 2021

Polyetheretherketone (PEEK)/polyethersulfone (PES) blends are initially not miscible, except when the blends are prepared by solvent mixing. We propose a route to elaborate PEEK/PES blends with partial miscibility by melt mixing at 375 °C with phenol...

(This article belongs to the Collection Advances in Polymeric Composites)
  • Article
  • Open Access
19 Citations
5,610 Views
14 Pages

Determination of Minimum Miscibility Pressure of CO2–Oil System: A Molecular Dynamics Study

  • Ding Li,
  • Shuixiang Xie,
  • Xiangliang Li,
  • Yinghua Zhang and ,
  • Heng Zhang and
  • Shiling Yuan
  • + 1 author+ 0 author

17 August 2021

CO2 enhanced oil recovery (CO2-EOR) has become significantly crucial to the petroleum industry, in particular, CO2 miscible flooding can greatly improve the efficiency of EOR. Minimum miscibility pressure (MMP) is a vital factor affecting CO2 floodin...

(This article belongs to the Special Issue Molecular Simulation in Interface and Surfactant)
  • Article
  • Open Access
5 Citations
3,239 Views
15 Pages

16 April 2024

In this study, we report the mechanochemical synthesis of praziquantel hemihydrate in the presence of five solvents with different water miscibility. The commercially available praziquantel Form A (a racemic anhydrate structure) was ground in the pre...

(This article belongs to the Special Issue Structural Studies in Drug Discovery and Development: From the Lead to the Pharmaceutical Form)
  • Article
  • Open Access
21 Citations
3,955 Views
21 Pages

Microfluidic Studies on Minimum Miscibility Pressure for n-Decane and CO2

  • Dmitrii Pereponov,
  • Michael Tarkhov,
  • Desmond Batsa Dorhjie,
  • Alexander Rykov and ,
  • Ivan Filippov,
  • Elena Zenova,
  • Vladislav Krutko,
  • Alexey Cheremisin and
  • Evgeny Shilov
  • + 4 authors+ 0 author

27 June 2023

Oil production is a complex process that can be made more efficient by applying gas enhanced oil recovery (EOR) methods. Thus, it is essential to know the minimum miscibility pressure (MMP) and minimum miscibility enrichment (MME) of gas in oil. Conv...

(This article belongs to the Special Issue The Optimization of Well Testing Operations for Oil and Gas Field)
  • Article
  • Open Access
47 Citations
5,807 Views
13 Pages

Plasticizer Enhancement on the Miscibility and Thermomechanical Properties of Polylactic Acid-Chitin-Starch Composites

  • Indra Surya,
  • N. G. Olaiya,
  • Samsul Rizal,
  • Ikramullah Zein and ,
  • N. A. Sri Aprilia,
  • M. Hasan,
  • Esam Bashir Yahya,
  • K. K. Sadasivuni and
  • H. P. S. Abdul Khalil
  • + 4 authors+ 0 author

5 January 2020

In previous research, a polylactic chitin starch composite was prepared without the use of a solvent to enhance the miscibility. In this study, a polylactic acid (PLA) chitin starch composite was produced with chloroform as a plasticizer in the ratio...

  • Article
  • Open Access
5 Citations
2,629 Views
10 Pages

16 May 2023

Nematic liquid crystals (LCs) are known to undergo a phase transition to chiral nematic LCs possessing helices upon doping with enantiomeric molecules known as chiral dopants. The relationship between the helical pitch (p), the molar fraction (x), an...

(This article belongs to the Special Issue Symmetry and Liquid Crystals)
  • Article
  • Open Access
17 Citations
2,570 Views
19 Pages

Characteristics and Mechanisms of CO2 Flooding with Varying Degrees of Miscibility in Reservoirs Composed of Low-Permeability Conglomerate Formations

  • Yun Luo,
  • Shenglai Yang,
  • Yiqi Zhang,
  • Gen Kou and ,
  • Shuai Zhao,
  • Xiangshang Zhao,
  • Xing Zhang,
  • Hao Chen,
  • Xiuyu Wang and
  • Lei Bai
  • + 6 authors+ 1 author

12 June 2024

The reservoir type of the MH oil field in the Junggar Basin is a typical low-permeability conglomerate reservoir. The MH oilfield was developed by water injection in the early stage. Nowadays, the reservoir damage is serious, and water injection is d...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
5 Citations
3,729 Views
19 Pages

As amorphization may improve the solubility and bioavailability of a drug substance, the aim of this work was to assess to what extent the crystallinity of caffeine (CAF) and theophylline (TF) can be reduced by homogenization with a polymeric excipie...

  • Article
  • Open Access
8 Citations
4,150 Views
13 Pages

Partial Miscibility and Concentration Distribution of Two-Phase Blends of Crosslinked NBR and PVC

  • Yuka Komori,
  • Aoi Taniguchi,
  • Haruhisa Shibata,
  • Shinya Goto and
  • Hiromu Saito

10 March 2023

We found that the blends of nitrile butadiene rubber (NBR) and polyvinyl chloride (PVC) exhibited lower critical solution temperature (LCST)-type phase behavior in which a single-phase blend tends to phase separate at elevated temperatures when the a...

(This article belongs to the Special Issue Phase Transitions and Structures in Polymer Science)
  • Article
  • Open Access
15 Citations
5,277 Views
12 Pages

Ketone Solvent to Reduce the Minimum Miscibility Pressure for CO2 Flooding at the South Sumatra Basin, Indonesia

  • Adi Novriansyah,
  • Wisup Bae,
  • Changhyup Park,
  • Asep K. Permadi and
  • Shabrina Sri Riswati

21 March 2020

This paper experimentally analyzes the chemical additives, i.e., methanol and ethanol, as alcohol solvents, and acetone as a ketone solvent, and the temperature influencing the minimum miscibility pressure (MMP) that is essential to design miscible C...

(This article belongs to the Special Issue Research on the Polymer-Coated Nanoparticles for Enhanced Oil Recovery)
  • Article
  • Open Access
500 Views
26 Pages

Study on Minimum Miscibility Pressure of CO2–Oil System in Deep High-Temperature and High-Pressure Reservoirs

  • Hong-Mei Wang,
  • Li-Jian Li,
  • Hong Chen,
  • Wei Xiong and ,
  • Ye Tian,
  • Yu-Long Zhao,
  • Yu-Jia Zeng and
  • Xian-Yu Jiang
  • + 3 authors+ 0 author

25 June 2026

Deep high-temperature and high-pressure (HTHP) oil reservoirs have limited experimental MMP data, large differences between reservoir and saturation pressures, low gas–oil ratios, and pressure-sensitive CO2–oil phase behavior, which make...

(This article belongs to the Special Issue Engineering Problems in the Development of Unconventional Oil and Gas Reservoirs)
  • Article
  • Open Access
56 Citations
13,525 Views
12 Pages

Miscibility and Hydrogen Bonding in Blends of Poly(4-vinylphenol)/Poly(vinyl methyl ketone)

  • Hana Bourara,
  • Slimane Hadjout,
  • Zitouni Benabdelghani and
  • Agustin Etxeberria

28 October 2014

The miscibility and phase behavior of poly(4-vinylphenol) (PVPh) with poly(vinyl methyl ketone) (PVMK) was investigated by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM)....

(This article belongs to the Special Issue Polymer Blends)
  • Article
  • Open Access
33 Citations
8,148 Views
17 Pages

Phase Behaviour and Miscibility Studies of Collagen/Silk Fibroin Macromolecular System in Dilute Solutions and Solid State

  • Ima Ghaeli,
  • Mariana A. De Moraes,
  • Marisa M. Beppu,
  • Katarzyna Lewandowska and ,
  • Alina Sionkowska,
  • Frederico Ferreira-da-Silva,
  • Maria P. Ferraz and
  • Fernando J. Monteiro
  • + 3 authors+ 0 author

18 August 2017

Miscibility is an important issue in biopolymer blends for analysis of the behavior of polymer pairs through the detection of phase separation and improvement of the mechanical and physical properties of the blend. This study presents the formulation...

(This article belongs to the Special Issue Natural Polymers and Biopolymers)
  • Article
  • Open Access
15 Citations
6,002 Views
22 Pages

Unravelling the Miscibility of Poly(2-oxazoline)s: A Novel Polymer Class for the Formulation of Amorphous Solid Dispersions

  • Melissa Everaerts,
  • Ali Tigrine,
  • Victor R. de la Rosa,
  • Richard Hoogenboom and ,
  • Peter Adriaensens,
  • Christian Clasen and
  • Guy Van den Mooter
  • + 2 authors+ 0 author

6 August 2020

Water-soluble polymers are still the most popular carrier for the preparation of amorphous solid dispersions (ASDs). The advantage of this type of carrier is the fast drug release upon dissolution of the water-soluble polymer and thus the initial hig...

(This article belongs to the Collection Poorly Soluble Drugs)
  • Article
  • Open Access
3 Citations
1,710 Views
20 Pages

The Influence of Miscibility of Some PLA-Based Bio-Hybrids Designed for 3D Printing and Medium-Life Applications on Their Physical Aging and Thermodynamic Stability

  • Doina Dimonie,
  • Silvia Mathe,
  • Roxana Doina Trușcă,
  • Celina Maria Damian and ,
  • Maria Râpă,
  • Ștefan-Ovidiu Dima,
  • Ștefan Dumitru and
  • Florin Oancea
  • + 3 authors+ 0 author

25 December 2025

The aim of this article was to identify the dependence of the physical aging of PLA-talc-PCL bio-hybrids, with or without a nucleating agent (NA), produced by melt compounding and designed for 3D printing for medium-life applications, on the degree o...

(This article belongs to the Special Issue Progress in 3D Printing of Polymeric Materials)
  • Article
  • Open Access
2 Citations
2,371 Views
15 Pages

22 December 2022

Fracture toughness is one of the main factors influencing the durability of light-cured composites used for dental restorations and fillings. One of the methods of increasing the fracture toughness is the modification of the matrix with liquid acrylo...

(This article belongs to the Special Issue Biomaterials and Mechanics in Dentistry)
  • Article
  • Open Access
19 Citations
3,909 Views
15 Pages

Effect of Process Parameters on Laser Powder Bed Fusion of Al-Sn Miscibility Gap Alloy

  • Chiara Confalonieri,
  • Riccardo Casati and
  • Elisabetta Gariboldi

Al-Sn binary system is a miscibility gap alloy consisting of an Al-rich phase and a Sn-rich phase. This system is traditionally applied in bearings and more recently found application as form-stable phase change material (PCM) exploiting solid-liquid...

(This article belongs to the Special Issue Laser Assisted Manufacturing)
  • Article
  • Open Access
47 Citations
7,721 Views
13 Pages

22 October 2018

The mechanical properties of poly (lactic acid) (PLA) nanofibers with 0%, 5%, 10%, and 20% (w/w) poly (vinyl alcohol) (PVA) were investigated at the macro- and microscale. The macro-mechanical properties for the fiber membrane revealed that both the...

  • Article
  • Open Access
11 Citations
5,618 Views
20 Pages

19 April 2022

The miscibility of a series of binary blends such as polystyrene/poly(methyl methacrylate) (PS/PMMA), polystyrene/poly(vinyl chloride)(PS/PVC), poly(vinyl chloride)/poly(polymethyl methacrylate)(PVC/PMMA) and poly(ethylene-co-vinyl alcohol)/poly(lact...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
40 Citations
6,190 Views
16 Pages

9 December 2019

Carbon dioxide (CO2) injection is one of the most effective methods for improving hydrocarbon recovery. The minimum miscibility pressure (MMP) has a great effect on the performance of CO2 flooding. Several methods are used to determine the MMP, inclu...

(This article belongs to the Special Issue Artificial Intelligence and Cognitive Computing: Methods, Technologies, Systems, Applications and Policy Making)
  • Article
  • Open Access
1 Citations
439 Views
18 Pages

Experimental Study on CO2–Crude Oil Phase Behavior, Miscibility and Threshold Pressure Gradient for CCUS in Ultra-Low Permeability Reservoir

  • Chunning Gao,
  • Yingjie Yuan,
  • Wei Fan,
  • Jiawen Song and ,
  • Xinhui Lei,
  • Jiahao Ma and
  • Changhua Yang
  • + 2 authors+ 0 author

17 September 2026

The Chang 8 reservoir in the Baima Middle Block of the Ordos Basin is an ultra-low-permeability reservoir that has faced formation-pressure depletion, a rising water cut, and poor remaining-oil recovery during long-term water-injection development. C...

(This article belongs to the Special Issue Advanced Strategies in Enhanced Oil Recovery: Theory and Technology)
  • Article
  • Open Access
2 Citations
2,259 Views
14 Pages

25 February 2025

CO2 flooding technology for tight oil reservoirs not only effectively addresses the challenge of low recovery rates, but also facilitates geological CO2 sequestration, thereby achieving the dual objective of enhanced CO2 utilization and secure storag...

(This article belongs to the Section A: Sustainable Energy)
  • Article
  • Open Access
19 Citations
5,423 Views
21 Pages

Solid dispersions provide a key technology to formulate poorly water-soluble drugs, and a main task of early development is appropriate selection of polymer. This study investigates the use of a novel rheology-based approach to evaluate miscibility a...

(This article belongs to the Special Issue Pharmaceutical Freeze Drying and Spray Drying)
  • Article
  • Open Access
30 Citations
4,374 Views
22 Pages

7 December 2022

The purpose of the present work was to gain a fundamental understanding of how the composition and physico-chemical properties affect the rheology, morphology, miscibility, and thermal stability of poly(lactic acid) (PLA)—poly(hydroxybutyrate-c...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
13 Citations
6,495 Views
11 Pages

6 December 2016

Amorphous poly(vinyl phenol) (PVPh) is introduced into poly(butylene succinate-co-butylene adipate)/poly(l-lactic acid) (PBSA/PLLA) blends via solution casting. Fourier transform infrared spectroscopy (FTIR) analysis verifies that intermolecular hydr...

(This article belongs to the Special Issue Polymer Blends 2017)
  • Article
  • Open Access
1 Citations
1,447 Views
16 Pages

Investigating the Role of Miscibility in Hydrogenated Dicyclopentadiene Resin/Polymer Blends: A Molecular Dynamics Study

  • Anastassia N. Rissanou,
  • Rohit Ghanta,
  • Manolis Doxastakis and
  • Vagelis Harmandaris

28 February 2026

The behavior and properties of polymer–resin blends are critical for the design of advanced polymeric systems in a wide range of applications. In this work, we present an atomistic molecular dynamics study of the effects of hydrogenated dicyclo...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
4 Citations
2,769 Views
17 Pages

22 June 2023

Chitosan is a polysaccharide vastly examined in polymer science for its unique structure. In the present study, CS was derivatized with 2-methoxy-4vinylphenol (MVP) in four different ratios through a free radical reaction. The CS-MVP derivatives were...

(This article belongs to the Special Issue Marine Biopolymers and Their Applications in Drug Delivery)
  • Article
  • Open Access
24 Citations
5,153 Views
17 Pages

Joining of Cu-based dispersion-strengthened alloys to Ni-based superalloys has garnered increased attention for liquid rocket engine applications due to the high thermal conductivity of Cu-based alloys and high temperature tensile strength of Ni-base...

(This article belongs to the Special Issue Joining of Unweldable Materials: Concepts, Techniques and Processes)
  • Article
  • Open Access
3 Citations
2,181 Views
11 Pages

Investigation of the Influence of Formation Water on the Efficiency of CO2 Miscible Flooding at the Core Scale

  • Yanfu Pi,
  • Zailai Su,
  • Li Liu,
  • Yutong Wang and ,
  • Shuai Zhang,
  • Zhihao Li and
  • Yufeng Zhou
  • + 2 authors+ 0 author

12 October 2023

This study investigated the impact of formation water on the mass transfer between CO2 and crude oil in low-permeability reservoirs through CO2 miscible flooding. Formation water leads to water blocks, which affect the effectiveness of CO2 miscible f...

(This article belongs to the Special Issue Advances in Improving Oil Recovery in Low-Permeability Hydrocarbon Resources)
  • Article
  • Open Access
14 Citations
6,039 Views
15 Pages

10 August 2021

This study aimed to improve polydimethylsiloxane (PDMS) conversion in the preparation of polycarbonate (PC)–polydimethylsiloxane (PDMS) copolymer through melt polycondensation. We examined the transesterification process of PDMS with diphenyl carbona...

(This article belongs to the Special Issue Polymers Synthesis and Characterization)
  • Article
  • Open Access
2 Citations
2,132 Views
13 Pages

17 May 2024

Carbon dioxide (CO2) miscible fracturing huff-and-puff technology now plays a pivotal role in enhancing crude oil recovery rates, particularly in reservoirs with challenging physical properties, strong water sensitivity, high injection pressure, and...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
4 Citations
2,809 Views
13 Pages

Poly(L-lactic acid) (PLLA) was blended with an ethylene-vinyl acetate (EVA) copolymer, which is generally recognized as a phase-separated system. The interactions between these polymer species were examined via spherulite observation. The PLLA/EVA bl...

(This article belongs to the Section Polymer Composites)
  • Article
  • Open Access
19 Citations
6,614 Views
16 Pages

Miscibility and Nanoparticle Diffusion in Ionic Nanocomposites

  • Argyrios Karatrantos,
  • Yao Koutsawa,
  • Philippe Dubois,
  • Nigel Clarke and
  • Martin Kröger

10 September 2018

We investigate the effect of various spherical nanoparticles in a polymer matrix on dispersion, chain dimensions and entanglements for ionic nanocomposites at dilute and high nanoparticle loading by means of molecular dynamics simulations. The nanopa...

(This article belongs to the Special Issue Multiscale Modeling of Polymers)
  • Article
  • Open Access
4 Citations
2,773 Views
22 Pages

25 September 2024

The existence of propane (C3H8) in a CO2-oil mixture has great potential for increasing CO2 solubility and decreasing minimum miscibility pressure (MMP). In this study, the enhanced solubility, reduced viscosity, and lowered MMP of CO2-saturated crud...

(This article belongs to the Section H: Geo-Energy)
  • Article
  • Open Access
14 Citations
3,044 Views
14 Pages

Experimental Study on the Sweep Law of CO2 Miscible Flooding in Heterogeneous Reservoir in Jilin

  • Wen Li,
  • Hongwei Yu,
  • Zhengming Yang,
  • Jinlong Li and ,
  • Xinliang Chen and
  • Longfei Ma
  • + 1 author+ 0 author

8 August 2022

It is very important to effectively describe the sweep characteristics of CO2 miscible flooding based on physical models for actual reservoir development. In this study, based on the geological characteristics of the Jilin ultra-low permeability rese...

(This article belongs to the Topic Porous Flow of Energy & CO2 Transformation and Storage in Deep Formations)
  • Article
  • Open Access
298 Views
16 Pages

21 September 2026

Carbon dioxide-enhanced oil recovery (CO2-EOR) in ultra-low-permeability reservoirs requires a reliable understanding of CO2–oil phase behavior and minimum miscibility pressure (MMP), particularly where multiple stratigraphic members are co-dev...

(This article belongs to the Section H1: Petroleum Engineering)
  • Article
  • Open Access
10 Citations
2,940 Views
14 Pages

5 April 2021

Unlocking oil from tight reservoirs remains a challenging task, as the existence of fractures and oil-wet rock surfaces tends to make the recovery uneconomic. Injecting a gas in the form of a foam is considered a feasible technique in such reservoirs...

(This article belongs to the Section H: Geo-Energy)
  • Article
  • Open Access
14 Citations
3,595 Views
15 Pages

Interaction between Gelatin and Mulberry Leaf Polysaccharides in Miscible System: Physicochemical Characteristics and Rheological Behavior

  • Xiu-Xiu Zhang,
  • Bu-Yan Liao,
  • Zi-Jing Guan,
  • Kiran Thakur and ,
  • Mohammad Rizwan Khan,
  • Rosa Busquets,
  • Jian-Guo Zhang and
  • Zhao-Jun Wei
  • + 3 authors+ 0 author

26 May 2022

In this study, the miscible system was formed by mixing gelatin (G) with mulberry leaf polysaccharides (MLPs) continuously extracted with a hot buffer (HBSS), a chelating agent (CHSS), a dilute alkali (DASS), and a concentrated alkali (CASS), and the...

(This article belongs to the Special Issue Research on the Properties of Polysaccharides, Starch, Protein, Pectin, and Fibre in Food Processing)
  • Article
  • Open Access
274 Views
15 Pages

Blasingame Production Decline Model of CO2 Miscible Flooding in the Tight Oil Reservoirs with Stress Sensitivity

  • Jianchao Shi,
  • Yuzhe Shi,
  • Wenhao Duan,
  • Peng Song and ,
  • Xiaodong Chen,
  • Yizhuo Yang,
  • Handan Zhang,
  • Xinjiu Rao,
  • Jing Ma and
  • Xinwei Liao
  • + 5 authors+ 0 author

22 August 2026

For tight oil reservoirs, analyzing the characteristics of the Blasingame production decline curves of production wells under CO2 flooding can effectively evaluate the development performance of CO2 miscible flooding. However, tight oil reservoirs ex...

(This article belongs to the Special Issue Advances in Carbon Dioxide (CO2) Enhanced Oil Recovery (EOR) and Carbon Capture and Storage (CCS))
  • Article
  • Open Access
3 Citations
2,531 Views
13 Pages

31 July 2025

This study presents a comprehensive evaluation of miscible gas injection (MGI) strategies for enhanced oil recovery (EOR) in high-salinity reservoirs, with a focus on the Raleigh Oil Field. Using a calibrated Equation of State (EOS) model in CMG WinP...

(This article belongs to the Special Issue Recent Developments in Enhanced Oil Recovery (EOR) Processes)
  • Article
  • Open Access
4 Citations
1,048 Views
18 Pages

Pore-Scale Numerical Simulation of CO2 Miscible Displacement Behavior in Low-Permeability Oil Reservoirs

  • Tingting Li,
  • Suling Wang,
  • Jinbo Li,
  • Daobing Wang and ,
  • Zhiheng Tao and
  • Yue Wu
  • + 1 author+ 0 author

17 December 2025

CO2 miscible flooding provides dual advantages in enhancing oil recovery and facilitating geological sequestration, and has become a key technical approach for developing low-permeability oil reservoirs and carbon emission reduction. The pore-scale f...

(This article belongs to the Special Issue Hydrogen–Carbon Storage Technology and Optimization)

of 18