Skip to Content
You are currently on the new version of our website. Access the old version .

945 Results Found

  • Article
  • Open Access
10 Citations
2,893 Views
13 Pages

16 October 2022

Graphite/polymer composites are brittle materials, and tool wear, which has a significant impact on the quality of the machined surface of the material, is very serious during the cutting process. In general, the magnitude of the cutting force direct...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
7 Citations
1,673 Views
18 Pages

15 August 2025

The 7075-T7451 aluminum alloy, widely used in aerospace, aviation, and automotive fields for critical load-bearing components due to its excellent mechanical properties, suffers from residual stresses induced by thermo-mechanical coupling during mill...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
3 Citations
2,888 Views
29 Pages

15 June 2025

The increasing demand for precision-engineered machined components across diverse sectors highlights the importance of optimizing machining procedures. The improvement of milling strategies is significant in the production of flat surfaces and slots...

  • Article
  • Open Access
10 Citations
1,716 Views
19 Pages

28 November 2024

The milling force plays a pivotal role in CFRP milling. Modeling of the milling force is helpful to explore the changing law, optimize the processing parameters, and then reduce the appearance of defects. However, most of the existing models ignore t...

  • Article
  • Open Access
5 Citations
1,899 Views
18 Pages

8 January 2026

The shift toward digital and smart manufacturing requires an accurate prediction of cutting behavior, such as cutting forces. Controlling cutting forces in machining is important for maintaining product quality, particularly in steels such as X5CrNi1...

(This article belongs to the Special Issue Emerging Trends and Technologies in Manufacturing Engineering)
  • Article
  • Open Access
28 Citations
4,257 Views
16 Pages

11 August 2020

Optimization of cutting parameters in micro-milling is an important measure to improve surface quality and machining efficiency of the workpiece. Investigation of micro-milling forces prediction plays a positive role in improving machining capacity....

  • Article
  • Open Access
3 Citations
1,717 Views
21 Pages

28 April 2025

To ensure high quality of the machined surface, various methods are used to assess the turning process. This process can be monitored using indirect techniques, such as measuring cutting forces and recording acoustic emission (AE) signals, which help...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
27 Citations
6,666 Views
19 Pages

15 January 2023

In this paper, the responses of machined surface roughness and milling tool cutting forces under the different milling processing parameters (cutting speed v, feed rate f, and axial cutting depth ap) are experimentally investigated to meet the increa...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
143 Views
18 Pages

Analysis of the Effect of Cutting Parameters on Cutting Force and Temperature in Thermo-Mechanical Coupled Orthogonal Cutting of Polyethylene (PE)

  • Qidi Guo,
  • Yun Chen,
  • Duanjiao Li,
  • Wenxing Sun and ,
  • Junwen Yao,
  • Haotian Li,
  • Xiaonan Wang and
  • Yupeng Zou
  • + 3 authors+ 0 author

PE material is an ideal type of material for improving corrosion and impact resistance of engineering structural applications, because of its excellent corrosion resistance, low coefficient of friction, and favorable impact resistance. PE structural...

  • Article
  • Open Access
10 Citations
3,720 Views
12 Pages

In this study, the effects of cutting speed and feed rate on the roughness parameters Ra, Rz, Rsk, Rku, Rpk, Rvk, and A2 were examined during machining with coated carbide tools in a dry environment. The authors introduced the Rvk/Rpk ratio, a coeffi...

  • Article
  • Open Access
5 Citations
1,365 Views
32 Pages

11 August 2025

This study investigates the influence of cutting edge geometry (continuous, serrated, and wavy) and selected machining parameters (cutting speed vc, feed per tooth fz, and radial infeed ae) on cutting-force components and dynamic behavior during the...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
27 Citations
4,512 Views
23 Pages

Nano-lubricant machining of Aluminum 8112 alloy is the art of sustainable manufacturing of mechanical components used for defense technology and aerospace application. However, machining aluminum alloys generates excess heat, which tends to increase...

  • Article
  • Open Access
13 Citations
3,949 Views
20 Pages

27 May 2023

Trochoidal milling is an efficient strategy for the rough machining of difficult-to-cut materials. The true trochoidal toolpath has C2 continuity and avoids sharp changes in engagement angle and cutting load, resulting in smooth machine tool movement...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
3 Citations
2,131 Views
16 Pages

Hierarchical Control in Mechatronic Technological Systems

  • Natalia Lishchenko,
  • Anatoly Gushchin and
  • Vasily Larshin

2 October 2024

The topic of hierarchical control of technological machines is one of the most relevant in mechanical engineering technology. The most difficult issue in this area is the organization of interactions between different control levels, on the one hand,...

(This article belongs to the Section Machines Testing and Maintenance)
  • Article
  • Open Access
7 Citations
3,090 Views
19 Pages

Investigation and Statistical Analysis for Optimizing Surface Roughness, Cutting Forces, Temperature, and Productivity in Turning Grey Cast Iron

  • Magdy M. El Rayes,
  • Adel T. Abbas,
  • Abdulhamid A. Al-Abduljabbar,
  • Adham E. Ragab and ,
  • Faycal Benyahia and
  • Ahmed Elkaseer
  • + 1 author+ 0 author

10 June 2023

This paper investigated the influence of cutting parameters, including feed rate, cutting speed, tool nose radius, and wet or dry cutting conditions, on the resultant force, cutting edge/workpiece temperature, and surface roughness when turning grey...

(This article belongs to the Special Issue Machinability Analysis and Modeling of Metal Cutting)
  • Article
  • Open Access
28 Citations
4,782 Views
26 Pages

Precision Grinding Technology of Silicon Carbide (SiC) Ceramics by Longitudinal Torsional Ultrasonic Vibrations

  • Zejiu Ye,
  • Xu Wen,
  • Weiqiang Wan,
  • Fuchu Liu and ,
  • Wei Bai,
  • Chao Xu,
  • Hui Chen,
  • Pan Gong and
  • Guangchao Han
  • + 4 authors+ 0 author

10 August 2023

Silicon carbide (SiC) ceramic material has become the most promising third-generation semiconductor material for its excellent mechanical properties at room temperature and high temperature. However, SiC ceramic machining has serious tool wear, low m...

(This article belongs to the Special Issue Physical Metallurgy of Metals and Alloys II)
  • Article
  • Open Access
6 Citations
2,021 Views
25 Pages

13 July 2024

Abrasion wear is a significant concern for cutting tools, particularly when milling asphalt concrete due to the presence of hard mineral aggregate particles. The pressure exerted on the cutting tool by the chipped material and the resulting cutting f...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
8 Citations
2,539 Views
16 Pages

Dynamic Analysis and Parameter Optimization of the Cutting System for Castor Harvester Picking Devices

  • Fanting Kong,
  • Defu Wang,
  • Lei Shi,
  • Huinan Huang and ,
  • Qing Xie,
  • Teng Wu,
  • Yongfei Sun and
  • Changlin Chen
  • + 3 authors+ 0 author

7 February 2023

Our study aimed to identify a design which would reduce cutting resistance during the harvesting of castor. This paper presents a theoretical study of the wave-type disc cutter, which plays an important role in castor harvesting. Based on the SPH&nda...

(This article belongs to the Section Agricultural Science and Technology)
  • Article
  • Open Access
7 Citations
3,648 Views
16 Pages

4 September 2024

In this study, we performed milling machining on carbon-epoxy polymer composites and jute-epoxy composites using a CNC vertical machining center. We focused on spindle speed, feed rate, depth of cut, and flute number and analyzed the cutting force an...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
20 Citations
5,720 Views
23 Pages

16 October 2020

Cutter suction dredgers are important pieces of rock excavation equipment in port and waterway construction. It is valuable but difficult to properly estimate the cutting force on the chisel pick of the cutter suction dredger. In this paper, an analy...

(This article belongs to the Section Coastal Engineering)
  • Article
  • Open Access
1,687 Views
22 Pages

Effect of Tooth Wear on the Technological Parameters of the Milling Process of Asphalt Concrete Layers

  • Marius Gabriel Petrescu,
  • Teodor Dumitru,
  • Eugen Laudacescu and
  • Maria Tănase

This article discusses the findings of an experimental study designed to investigate the cutting forces encountered during the milling of asphalt pavement, considering the influence of cutter teeth wear. Experimental research was carried out for diff...

  • Article
  • Open Access
10 Citations
3,517 Views
14 Pages

13 November 2023

Nickel-based superalloys are among the most difficult materials to machine because they have high thermal strength, they are prone to hardening, carbides severely abrade the tool, and they have very poor thermal conductivity. Slot milling is a specif...

(This article belongs to the Special Issue Material Surface Topography Measurement, Analysis and Characterization)
  • Article
  • Open Access
2 Citations
4,673 Views
10 Pages

15 February 2018

To exploit the influence of the tunnel face and the distance between the diameter and the orifice of a blast pipe on the ventilation effect in symmetric tunnel construction, this paper uses Fluent to establish a three-dimensional model and numerical...

  • Article
  • Open Access
18 Citations
5,505 Views
16 Pages

3D-FEM Approach of AISI-52100 Hard Turning: Modelling of Cutting Forces and Cutting Condition Optimization

  • Anastasios Tzotzis,
  • Nikolaos Tapoglou,
  • Rajesh Kumar Verma and
  • Panagiotis Kyratsis

20 January 2022

In the present study, a 3D finite element (FE) model for machining AISI-52100 steel was proposed, with respect to three levels of cutting speed (100 m/min, 150 m/min and 200 m/min), feed (0.08 mm/rev, 0.11 mm/rev and 0.14 mm/rev), depth of cut (0.20...

(This article belongs to the Special Issue Feature Papers to Celebrate the First Impact Factor of Machines)
  • Article
  • Open Access
1 Citations
961 Views
18 Pages

Milling Parameters and Quality of Machined Surface of Wire Arc Additive Manufactured AISI 321 Steel

  • Qingrong Zhang,
  • Victor Nikolaevich Kozlov,
  • Vasiliy Aleksandrovich Klimenov,
  • Dmitry Anatolyevich Chinakhov and ,
  • Roman Vladimirovich Chernukhin,
  • Zeli Han and
  • Mengxu Qi
  • + 2 authors+ 0 author

2 February 2026

Due to the unique microstructure and mechanical heterogeneity of austenitic stainless steel made via wire arc additive manufacturing (WAAM), its machinability differs significantly from that of rolled material. Accordingly, this study systematically...

(This article belongs to the Special Issue Research on Metal Cutting, Casting, Forming, and Heat Treatment)
  • Article
  • Open Access
7 Citations
4,705 Views
22 Pages

The constitutive model and its pertinent set of parameters are important input data in finite element modeling to define the behavior of Ti6Al4V during machining process. The present work focusses on comparing different constitutive models and the pa...

(This article belongs to the Special Issue Advances in Modelling of Machining Operations)
  • Article
  • Open Access
8 Citations
2,567 Views
21 Pages

5 December 2023

To realize the reduction in cutting force and guarantee pruning section quality in the pruning and stubble work of Caragana korshinskii (C.K.), a concentric curvilineal edge sliding cutter was proposed and the related cutting characteristics were stu...

(This article belongs to the Special Issue New Development of Smart Forestry: Machine and Automation)
  • Article
  • Open Access
366 Views
17 Pages

17 August 2026

In the manufacturing industry, cutting force is the primary factor affecting bamboo milling. Excessive cutting force can increase tool wear and affect processing quality, processing energy consumption, and processing stability. Cutting parameters hav...

(This article belongs to the Special Issue Fabrication and Enhancement of Functional Surface Based on Advanced Coatings and Cutting Technologies)
  • Article
  • Open Access
31 Citations
4,713 Views
21 Pages

Experimental Investigation and Statistical Evaluation of Optimized Cutting Process Parameters and Cutting Conditions to Minimize Cutting Forces and Shape Deviations in Al6026-T9

  • Muhammad Abas,
  • Bashir Salah,
  • Qazi Salman Khalid,
  • Iftikhar Hussain and ,
  • Abdur Rehman Babar,
  • Rashid Nawaz,
  • Razaullah Khan and
  • Waqas Saleem
  • + 3 authors+ 0 author

29 September 2020

Precise, economical and sustainable cutting operations are highly desirable in the advanced manufacturing environment. For this aim, the present study investigated the influence of cutting parameters (i.e., the cutting speed (c), feed rate (f), depth...

(This article belongs to the Special Issue Optimization and Simulation in Alloy Cutting Processes)
  • Article
  • Open Access
64 Citations
4,599 Views
12 Pages

Parameter Identification of Cutting Forces in Crankshaft Grinding Using Artificial Neural Networks

  • Ivan Pavlenko,
  • Milan Saga,
  • Ivan Kuric,
  • Alexey Kotliar and ,
  • Yevheniia Basova,
  • Justyna Trojanowska and
  • Vitalii Ivanov
  • + 2 authors+ 0 author

26 November 2020

The intensifying of the manufacturing process and increasing the efficiency of production planning of precise and non-rigid parts, mainly crankshafts, are the first-priority task in modern manufacturing. The use of various methods for controlling the...

(This article belongs to the Special Issue Precision and Ultra-Precision Subtractive and Additive Manufacturing Processes of Alloys and Steels)
  • Article
  • Open Access
56 Citations
4,831 Views
12 Pages

Optimization of Machining Parameters to Minimize Cutting Forces and Surface Roughness in Micro-Milling of Mg13Sn Alloy

  • Ali Ercetin,
  • Kubilay Aslantaş,
  • Özgür Özgün,
  • Mustafa Perçin and
  • Manjunath Patel Gowdru Chandrashekarappa

12 August 2023

This comprehensive study investigates the micro-milling of a Mg13Sn alloy, a material of considerable interest in various high-precision applications, such as biomedical implants. The main objective of the study was to explore the optimizations of va...

(This article belongs to the Special Issue Manufacturing Methods or Processing Methods in Micromachines)
  • Article
  • Open Access
8 Citations
1,653 Views
23 Pages

Optimizing Cutting Parameters for Enhanced Control of Temperature, Cutting Forces, and Energy Consumption in Dry Turning of Ti6Al4V Alloy

  • Manuel Herrera Fernández,
  • Sergio Martín-Béjar,
  • Lorenzo Sevilla Hurtado and
  • Francisco Javier Trujillo Vilches

21 February 2025

This study aims to analyze the influence of cutting parameters (cutting speed, feed rate, and depth of cut) on cutting temperature, forces, and energy consumption during the dry turning of Ti6Al4V, providing an optimized machining strategy to improve...

  • Article
  • Open Access
60 Citations
5,384 Views
22 Pages

24 June 2020

Cutting force in the machining process of SiCp/Al particle reinforced metal matrix composite is affected by several factors. Obtaining an effective mathematical model for the cutting force is challenging. In that respect, the second-order model of cu...

  • Article
  • Open Access
3 Citations
1,387 Views
27 Pages

6 June 2025

This article explores how alloy composition, hardness, and machining parameters can affect the cutting forces encountered in aluminum–lithium (Al-Li)-based alloys. By analyzing Cu and Cu with Sc additions to Al-Li alloys and exposing them to va...

(This article belongs to the Special Issue Advances in Al/Mg/Cu Alloys and Their Composites: Welding, Additive Manufacturing, Heterogeneous Microstructures, and Mechanical Properties)
  • Article
  • Open Access
24 Citations
3,454 Views
16 Pages

Assessments of Process Parameters on Cutting Force and Surface Roughness during Drilling of AA7075/TiB2 In Situ Composite

  • S. Parasuraman,
  • I. Elamvazuthi,
  • G. Kanagaraj,
  • Elango Natarajan and
  • A. Pugazhenthi

31 March 2021

Reinforced aluminum composites are the basic class of materials for aviation and transport industries. The machinability of these composites is still an issue due to the presence of hard fillers. The current research is aimed to investigate the drill...

  • Article
  • Open Access
3 Citations
2,433 Views
21 Pages

Identification of the Constitutive Parameters of Viscosity and the Prediction of the Cutting Force of S32760 Duplex Stainless Steel under a High Strain Rate

  • Wei Zhang,
  • Jialiang Liu,
  • Lin Yang,
  • Xiangyuan Zhang and ,
  • Heqing Zhang and
  • Fukang Gong
  • + 1 author+ 0 author

4 June 2023

The mechanical properties of S32760 duplex stainless steel under dynamic loading conditions at high strain rates are significantly different from those under quasi-static conditions. As a result of large strain, high strain rate, and high temperature...

  • Article
  • Open Access
11 Citations
4,090 Views
14 Pages

22 June 2023

Lubrication and cooling in hard machining is an urgent and growing concern. The use of a suitable cooling lubrication condition is a crucial factor and has a great influence on the machining efficiency and the machined surface quality in hard machini...

  • Article
  • Open Access
20 Citations
5,085 Views
23 Pages

10 June 2025

This study focuses on optimizing machining parameters in the micro-milling of AlSi10Mg aluminum alloy produced via the powder bed fusion additive manufacturing process. Although additive manufacturing enables complex geometries and minimizes material...

(This article belongs to the Section Additive Manufacturing Technologies)
  • Article
  • Open Access
17 Citations
3,924 Views
19 Pages

30 June 2020

Ensuring optimal turning conditions has a huge impact on the quality and properties of the machined surface. The condition of the cutting tool is one of the factors to achieve this goal. In order to control its wear during the turning process, monito...

(This article belongs to the Collection Machining and Manufacturing of Alloys and Steels)
  • Article
  • Open Access
9 Citations
3,066 Views
18 Pages

On-Line Compensation for Micromilling of High-Aspect-Ratio Straight Thin Walls

  • Yang Li,
  • Xiang Cheng,
  • Siying Ling and
  • Guangming Zheng

In order to improve the machining quality and reduce the dimensional errors of micro high-aspect-ratio straight thin walls, the on-line cutting parameter compensation device has been introduced and corresponding micromilling processes have been inves...

(This article belongs to the Special Issue Micro and Nano Machining Processes)
  • Article
  • Open Access
1,307 Views
25 Pages

3 February 2025

The Finite-Difference Method (FDM) plays a pivotal role in the field of stability prediction, particularly in the modeling and stability analysis of cutting process dynamics. However, traditional approaches to optimizing the FDM often treat system st...

(This article belongs to the Section Advanced Manufacturing)
  • Article
  • Open Access
8 Citations
3,035 Views
24 Pages

28 April 2023

With the rapid development of photoelectric communication and other fields, the demand for high-precision aspheric mirrors has been increasing. Predicting dynamic cutting forces is vital in selecting machining parameters and also affects the surface...

  • Article
  • Open Access
12 Citations
3,483 Views
17 Pages

20 May 2023

In the present study, the impact of cutting-edge microgeometry on the cutting forces in the finish milling of a 7075-aluminium alloy was analysed. The influence of selected values of the rounding radius of cutting edge, and the size of the margin wid...

(This article belongs to the Special Issue Nonconventional Technology in Materials Processing-Volume 2)
  • Article
  • Open Access
22 Citations
3,569 Views
17 Pages

5 November 2022

Conical picks are applied to rock breaking, and the cutting parameters greatly influence cutting performance and rock damage. A conical pick rock-cutting numerical simulation model and software to provide a quantitative analysis of rock damage are es...

(This article belongs to the Section Machines Testing and Maintenance)
  • Article
  • Open Access
12 Citations
2,933 Views
21 Pages

Modelling of the Face-Milling Process by Toroidal Cutter

  • Marcin Płodzień,
  • Łukasz Żyłka and
  • Antun Stoić

2 April 2023

When face milling using a toroidal cutter, with a change in the depth of the cut, the entering angle varies as well. An experimental test of the influence of cutting parameters, such as the depth of the cut and the feed per tooth on the cutting force...

(This article belongs to the Special Issue Manufacturing Technology, Materials and Methods)
  • Feature Paper
  • Article
  • Open Access
2,913 Views
15 Pages

7 August 2021

Low-rigidity thin-walled parts are components of many machines and devices, including high precision electric micro-machines used in control and tracking systems. Unfortunately, traditional machining methods used for machining such types of parts cau...

(This article belongs to the Topic Modern Technologies and Manufacturing Systems)
  • Article
  • Open Access
13 Citations
3,125 Views
18 Pages

6 March 2025

Thin-walled micro-structures are a critical component of micro-devices, and their precise manufacture has a direct impact on product performance. Micro-milling is an effective manufacturing method that enables the production of micro-thin-walled stru...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
10 Citations
2,620 Views
17 Pages

27 July 2023

In this study, the cutting parameters for machining deep bottle holes (deep holes with complex profiles and length-to-diameter ratio greater than 10) were optimized based on cutting simulation, a regression analysis genetic algorithm, and experimenta...

(This article belongs to the Special Issue Advanced Machining Technology for Modern Engineering Materials)
  • Article
  • Open Access
2 Citations
1,327 Views
20 Pages

22 November 2025

To improve the quality of natural rubber tapping operations and resolve ambiguities in force application during the tapping process, a mechanical testing platform integrating linear and rotary modules was developed. This platform precisely quantifies...

(This article belongs to the Section Forest Operations and Engineering)
  • Article
  • Open Access
8 Citations
4,783 Views
15 Pages

Online Tool Wear Monitoring by the Analysis of Cutting Forces in Transient State for Dry Machining of Ti6Al4V Alloy

  • Yezika Sánchez Hernández,
  • F. Javier Trujillo Vilches,
  • Carolina Bermudo Gamboa and
  • Lorenzo Sevilla Hurtado

17 September 2019

In this work, the analysis of the cutting speed and feed rate influence on tool wear and cutting forces in Ti6Al4V alloy dry machining is presented. The study has been focused on the machining in a transient state. The tool wear mechanisms, tool wear...

of 19