The work reported here focuses on an evaluation of a novel heat stable formulation of a uterotonic peptide drug oxytocin involving stability testing under elevated temperatures and toxicokinetic response generated by sublingual (SL) administration in...
Etoricoxib, as a model drug, has a poor solubility and dissolution rate. Cyclodextrin derivatives can be used to solve such a problem. A comparative study was run on three cyclodextrin derivatives, namely β-CD, HP β-CD, and SBE β-CD, t...
Nicotine (NCT), administered in the form of a fast dissolving oral delivery system, can be a potential alternative to nicotine replacement therapy. NCT was extracted by maceration and acid-base extraction methods from Burley tobacco leaves with diffe...
Three-dimensional printing technology holds marked promise for the pharmaceutical industry and is now under intense investigation. Most research is aimed at a greater efficiency in printing oral dosage forms using powder bed printing or fused deposit...
Fast-dissolving tablets (FDTs) have arisen as a novel way to tackle issues encountered by patients with dysphagia, including youngsters, older people, and those with neurodegenerative or developmental disabilities. This review emphasises the crucial...
Paroxetine (PX) is the most potent serotonin reuptake inhibitor utilized in depression and anxiety treatment. It has drawbacks, such as having a very bitter taste, low water solubility, and undergoing extensive first pass metabolism, leading to poor...
The present study aimed to develop a nicotine microemulsion (NCT-ME) and incorporate it into a fast-dissolving film. The NCT-ME was prepared by mixing the specified proportions of nicotine (NCT), surfactant, co-solvent, and water. The NCT-ME was meas...
Febuxostat is a widely prescribed drug for the treatment of gout, which is a highly prevalent disease worldwide and is a major cause of disability in mankind. Febuxostat suffers from several limitations such as gastrointestinal disturbances and low o...
Three-dimensional printing (3DP) allows production of novel fast dissolving oral films (FDFs). However, mechanical properties of the films may not be desirable when certain excipients are used. This work investigated whether adding chitosan micro-rib...
The aim of this study was to develop fast dissolving films based on β-glucan and bilberry juice due to the bioactive potential of β-glucan and antidiabetic effect of bilberry juice. The benefit of incorporation of bioactive compounds into t...
Hypertensive crisis (HC) is an emergency health condition which requires an effective management strategy. Over the years, various researchers have developed captopril based fast-dissolving formulations to manage HC; however, primarily, the question...
Loratadine (LOR) is a second-generation antihistamine that exhibits a low and variable oral bioavailability (10–40%) and delayed onset owing to poor solubility and an extensive first-pass effect. Therefore, in light of the clinical need, the ma...
Tramadol hydrochloride is a synthetic analogue of codeine and shows activity on the central nervous system as an opioid agonist and inhibitor of serotonin and norepinephrine reuptake. It has been used for controlling moderate to severe pain. Mucoadhe...
A fast-dissolving film containing levocetirizine, a non-sedative antihistamine drug, was developed using pullulan, xanthan gum, propylene glycol, and tween 80 as the base materials. The drug content of the prepared films was within an acceptable limi...
In order to improve the solubility properties of BCS class II drug itraconazole, fast dissolving oral polymeric film formulations based on itraconazole nanocrystals were produced. Drug nanocrystals were manufactured by the wet pearl milling technique...
Migraine is a neurological disorder characterized by severe headaches, visual aversions, auditory, and olfactory disorders, accompanied by nausea and vomiting. Zolmitriptan (ZMT®) is a potent 5HT1B/1D serotonin receptor agonist frequently used fo...
This study focused on developing an influenza vaccine delivered in polymeric nanoparticles (NPs) using dissolving microneedles. We first formulated an influenza extracellular matrix protein 2 virus-like particle (M2e VLP)-loaded with poly(lactic-co-g...
Two size classes of piroxicam (PXC) pellets (mini (380–550 μm) and conventional (700–1200 μm)) were prepared using extrusion/spheronization and medium viscosity chitosan (CHS). Mixture experimental design and numerical optimization...
The purpose of this study was to investigate the applicability of the Gastrointestinal Simulator (GIS), a multi-compartmental dissolution model, to predict the in vivo performance of Biopharmaceutics Classification System (BCS) Class IIa compounds. A...
Background: Cannabidiol (CBD) is an approved treatment for childhood epilepsies and a candidate treatment for several other CNS disorders. However, it has poor oral bioavailability. We investigated the effect of a novel lipid formulation on its absor...
Sprinkle formulations represent an interesting concept of medicinal products aimed at the steadily growing population of patients suffering from swallowing difficulties (dysphagia). In the present work, immediate-release sprinkle MUPS (multiple-unit...
Background/Objectives: Electrospun polyvinylpyrrolidone (PVP) fibers are highly promising for fast-dissolving drug delivery. Methods: In this study, five PVP grades with molecular weights ranging from 4000 to 1,300,000 Da were investigated over a bro...
Several applications of nanofiber-based systems are based on their corresponding functionality-related properties, which often cannot be satisfied by a fiber web with a monolithic structure because of the various physicochemical properties and amount...
The influence of excipients on the disintegration times of tablets and the release of papaverine hydrochloride (PAP) from tablets were studied. Ten different formulations of tablets with PAP were prepared by direct powder compression. Different binde...
The most used pharmaceutical formulations for children are syrups, suppositories, soft chewable capsules, and mini-tablets. Administrating them might create an administration discomfort. This study aimed to develop and evaluate orodispersible films (...
With the ability to fabricate personalized dosage forms and considerably shorter manufacturing time, semisolid extrusion (SSE) 3D printing has rapidly grown in popularity in recent years as a novel, versatile manufacturing method that powers a wide r...
The present work aimed to develop a chronotherapeutic system of valsartan (VS) using nanocrystal formulation to improve dissolution. VS nanocrystals (VS-NC) were fabricated using modified anti-solvent precipitation by employing a Box–Behnken de...
Aceclofenac-loaded poly(vinyl-pyrrolidone)-based nanofiber formulations were prepared by electrospinning to obtain drug-loaded orally disintegrating webs to enhance the solubility and dissolution rate of the poorly soluble anti-inflammatory active th...
In recent research on the formulation prediction of oral dissolving drugs, deep learning models with significantly improved performance compared to machine learning models were proposed. However, the performance degradation due to limitations of an i...
Tolmetin sodium (TLM) is a non-steroidal anti-inflammatory drug (NSAIDs). TLM is used to treat inflammation, skeletal muscle injuries, and discomfort associated with bone disorders. Because of the delayed absorption from the gastro intestinal tract (...
In this work hydroxypropyl methylcellulose (HPMC) fast-dissolving thin films for oral administration are investigated. Furosemide (Class IV of the Biopharmaceutical Classification System) has been used as a model drug for in vitro release tests using...
The main objective of this study consists in establishing the influence of the intergranular superdisintegrant on the specific properties of drotaverine hydrochloride fast-dissolving granules (DROT-FDGs) and orodispersible tablets (DROT-ODTs). The or...
Amorphous solid dispersions (ASDs) improve the oral delivery of poorly water-soluble drugs. ASDs of olanzapine (OLZ), which have a high melting point and low solubility, are performed using a complicated process. Three-dimensional (3D) printing based...
Background: Lamivudine is widely used alone or in combination with other anti-HIV drugs in the infant to adolescent age groups of pediatric populations. Compounding of medications is frequently used for pediatric patients. However, many issues have b...
Rosuvastatin (RSV) is a widely used cholesterol-lowering medication, but its limited bioavailability due to its susceptibility to stomach pH and extensive first-pass metabolism poses a significant challenge. A fast-dissolving film (FDF) formulation o...
The present work aimed to explain the differences in oral performance in fasted humans who were categorized into groups based on the three different drug product formulations of dexketoprofen trometamol (DKT) salt—Using a combination of in vitr...
Lidocaine is a local anesthetic agent used in the form of injection and topical cream. However, these formulation types have limitations of being either painful or slow-acting, thereby hindering effective and complete clinical performance of lidocain...
Due to fast nasal mucociliary clearance, only the dissolved drug content can effectively permeate the mucosa and be pharmaceutically active after intranasal application of suspensions. Therefore, the aim of this study was to increase the budesonide c...
The aim of the study was to prepare indomethacin nanocrystal-loaded, 3D-printed, fast-dissolving oral polymeric film formulations. Nanocrystals were produced by the wet pearl milling technique, and 3D printing was performed by the semi-solid extrusio...
In this review, our intention was to shed some light on the history of sublingual and buccal delivery over the past 75 years. By searching the query sublingual and buccal, we noticed four steady growth periods in the number of publications between 19...
The effect of hydroxypropyl methylcellulose (HPMC) and methylcellulose (Methocel® 60 HG) on the dissolution behavior of two cocrystals derived from nitazoxanide (NTZ), viz., nitazoxanide-glutaric acid (NTZ-GLU, 1:1) and nitazoxanide-succinic acid...
Major depressive disorder (MMD) is a leading cause of disability worldwide. Approximately one-third of patients with MDD fail to achieve response or remission leading to treatment-resistant depression (TRD). One of the psychopharmacological strategie...
Background: Temozolomide (TMZ) oral suspension (Ped-TMZ, KIZFIZO®) is being developed for the treatment of relapsed or refractory neuroblastoma, a rare cancer affecting infants and young children. The study assessed the safety and the bioequivale...
A. filiculoides is a fast-growing aquatic fern with potential for laboratory-scale biomass production, nutrient recovery and biorefinery-oriented bioprocessing. However, its cultivation in controlled bioreactors remains limited by insufficient integr...
Nanofibers of the poorly water-soluble antibiotic ciprofloxacin (CIP) were fabricated in the form of an amorphous solid dispersion by using poly(vinyl pyrrolidone) as a polymer matrix, by the low-cost electrospinning method. The solubility of the nan...
Photochromic polycaprolactone (PCL) nanofibers were prepared through electrospinning. Various factors, including the solvent system, the concentration of PCL, the viscosity of the solution, and the electrical conductivity, influence the morphology of...
Background/Objectives: Children with autism spectrum disorder (ASD) frequently experience poor compliance with oral medication due to bitterness, unpleasant taste, and unsuitable dosage forms such as large tablets or capsules. Risperidone, a widely p...
The study aimed to prepare ciprofloxacin-loaded polyvinylpyrrolidone electrospun nanofibers for oral drug delivery, using a conventional nozzle-based and a lab-built nozzle-free electrospinning equipment. To produce nanofibers, electrospinning is the...
The aim of this study was to improve the solubility of etoposide–ethylcellulose (ET–ETO) microparticles using the freeze-drying technique. Ethylcellulose (EC) microparticles loaded with etoposide (ETO) were prepared with different drug–polymer molar...
The development of topical inserts for the prevention of sexually transmitted infections (STIs), particularly human immunodeficiency virus (HIV), represents a promising alternative to oral and parenteral pre-exposure prophylaxis (PrEP) dosage forms....
of 2