Skip to Content

104 Results Found

  • Article
  • Open Access
1 Citations
4,594 Views
19 Pages

2 May 2022

Thick wall-thick slab structures are a newly-developed type of structural system comprising solely of structural floor slabs and shear walls, the former of which is thicker than that of slabs used in typical reinforced concrete frame structures. This...

(This article belongs to the Topic Advances on Structural Engineering)
  • Article
  • Open Access
4 Citations
1,945 Views
21 Pages

Steel–concrete composite structures have advantages in terms of strong bearing capacity and full utilisation of performance, and thus, composite frame beams are widely used in building construction. However, in the design and use of existing co...

(This article belongs to the Special Issue High-Performance Steel–Concrete Composite/Hybrid Structures)
  • Article
  • Open Access
1 Citations
2,697 Views
17 Pages

14 November 2022

Three- or two-dimensional (2D) numerical models are used for the evaluation of the seismic performance of reinforced concrete (RC) buildings. This study examines a 2D numerical model for a specimen used in a full-scale four-story RC shaking-table tes...

(This article belongs to the Special Issue Concrete in Structural Engineering: Fabrication and Mechanical Behavior)
  • Article
  • Open Access
4 Citations
4,164 Views
17 Pages

7 March 2024

Due to the shear strain in the plane of the slab, the parts of the slab remote from the steel beam lag behind the part of the slab located in its proximity. This shear lag effect causes a non-uniform stress distribution across the width of the slab....

  • Article
  • Open Access
5 Citations
4,831 Views
18 Pages

15 October 2021

Extensive brittle failures in the weld zone of the beam bottom flange in composite joints of SMRFs were observed during the Northridge earthquake and the Kobe earthquake. One of the main reasons is the large tensile strain demand generated at the bea...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
43 Citations
5,147 Views
16 Pages

Surface Crack Detection in Precasted Slab Track in High-Speed Rail via Infrared Thermography

  • Zai-Wei Li,
  • Xiao-Zhou Liu,
  • Hong-Yao Lu,
  • Yue-Lei He and
  • Yun‐Lai Zhou

29 October 2020

The surface crack of ballastless track slab can seriously reduce the serviceability and durability of high-speed railway (HSR). Aiming at accurately and efficiently detecting the slab cracks, this research proposes an infrared thermography (IRT)-base...

(This article belongs to the Section Smart and Functional Materials)
  • Article
  • Open Access
172 Views
14 Pages

23 October 2026

In this paper, the structure of the silicon modulator is optimized by asymmetric slab design to enhance overall performance. Recognizing the inherent disparity in electron and hole mobilities in silicon, we propose and systematically investigate asym...

(This article belongs to the Special Issue Silicon Photonics: Challenges and Future Directions)
  • Article
  • Open Access
8 Citations
3,021 Views
17 Pages

Experimental Study on the Influence of Transverse Crack on Chloride Ingress in Concrete Slab Track of High-Speed Railway

  • Xiaochun Liu,
  • Haihua Li,
  • Min Qi,
  • Yiyi Yang and ,
  • Zhihui Zhu and
  • Zhiwu Yu
  • + 1 author+ 0 author

4 May 2023

The concrete track slab and the base slab of the high-speed railway CRTS II track structure are prone to transverse cracks in the initial service period, which are subjected to environmental action and train load. In order to investigate the influenc...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
10 Citations
7,025 Views
14 Pages

23 April 2017

This paper presents a pushover analysis using ABAQUS (Dassault Company, Providence, Rhodes Island, USA) for spatial reinforced concrete (RC) frames. The main purpose is to study the effect of the infills on failure patterns of the RC frames. The Fini...

  • Article
  • Open Access
1 Citations
953 Views
16 Pages

19 January 2026

To study the crack resistance of UHPC precast composite slabs, this paper conducts flexural performance tests on one UHPC monolithic slab and four UHPC precast composite slabs, investigating the influence of structural form, loading method, and shear...

(This article belongs to the Special Issue High-Performance Steel–Concrete Composite/Hybrid Structures)
  • Article
  • Open Access
8 Citations
2,953 Views
15 Pages

31 October 2020

Cross-tensioned concrete pavement can reduce transverse joints and cracks and improve the durability of the pavement, and the decrease in slab thickness can be achieved without damaging the performance of the pavement. However, the corrosion of the s...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
32 Citations
3,356 Views
21 Pages

10 October 2023

Basalt fiber-reinforced polymer (BFRP) reinforced concrete is a new alternative to conventional steel-reinforced concrete due to its high tensile strength and corrosion resistance characteristics. However, as BFRP is a brittle material, unexpected fa...

(This article belongs to the Special Issue Structural Health Monitoring (SHM) and Nondestructive Evaluation (NDE) for Infrastructure and Manufacturing)
  • Article
  • Open Access
10 Citations
2,652 Views
19 Pages

30 May 2023

Surface cracks are typical defects in high-speed rail (HSR) slab tracks, which can cause structural deterioration and reduce the service reliability of the track system. However, the question of how to effectively detect and quantify the surface crac...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
1 Citations
1,121 Views
19 Pages

6 August 2025

In this study, a new type of novel demountable connector is proposed to enable complete dry connections between concrete beams and slabs, facilitating the full demountable design of these components. To analyze and evaluate the flexural performance o...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
3 Citations
2,599 Views
23 Pages

25 April 2024

The application of pulse power discharge (PPD) technology in the crushing and dismantling of concrete structures has characteristics related to both green and environmental protection, as well as safety and reliability, with broad application prospec...

(This article belongs to the Special Issue Dynamic Response of Structures)
  • Article
  • Open Access
599 Views
18 Pages

Influences of Under-Track Foundation Diseases on Track System

  • Jinbao Yao,
  • Xiaoteng Sun,
  • Zhikun Song and
  • Yueyue Chen

9 February 2026

In order to study the influence of the under-track foundation disease on the track system, based on the CRTS II slab ballastless track in ABAQUS, this paper analyzes the influence of the overall temperature, temperature gradient, CA mortar layer stif...

(This article belongs to the Special Issue Research on the Structural Mechanics of Steel–Concrete Composite Structures)
  • Article
  • Open Access
598 Views
29 Pages

Shear Lag Effect Analysis of GFRP Composite Truss Web Girder Bridge

  • Dongyan Xue,
  • Rui Chu,
  • Zhifeng Yuan and
  • Zheng Xiao

25 February 2026

To clarify the shear lag effect and flexural performance of glass fiber-reinforced polymer (GFRP) composite truss web girder bridges and verify the feasibility of substituting steel truss webs with GFRP members, a refined finite element (FE) model wa...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Feature Paper
  • Article
  • Open Access
14 Citations
9,741 Views
15 Pages

24 December 2020

Precast concrete (PC) plays an important role in the industrialization processes of buildings, so it is critical to study the seismic performance of such structures. Several experimental and numerical studies have been conducted to investigate the be...

(This article belongs to the Collection Structural Analysis for Earthquake-Resistant Design of Buildings)
  • Article
  • Open Access
17 Citations
9,704 Views
10 Pages

Strengthening of RC Slabs with Symmetric Openings Using GFRP Composite Beams

  • Yeol Choi,
  • Ik Hyun Park,
  • Sang Goo Kang and
  • Chang-Geun Cho

3 December 2013

This paper describes the results of experimental testing of glass fiber reinforced plastic (GFRP) composite beam strengthened reinforced concrete (RC) slabs with two symmetrical openings. Specimens, one-half scale, have been designed and fabricated t...

(This article belongs to the Special Issue Fiber-Reinforced Polymer Composites in Structural Engineering)
  • Article
  • Open Access
10 Citations
3,776 Views
28 Pages

15 December 2022

Recently, polyurea has been applied to improve the anti-blast performance of metal plates, masonry walls, and concrete structures. However, the strengthening effectiveness of polyurea on ultra-high performance concrete (UHPC) slabs with an overall re...

(This article belongs to the Special Issue Fault Detection and Data Analysis for Structure and Infrastructure Engineering)
  • Article
  • Open Access
18 Citations
4,788 Views
21 Pages

25 January 2019

Heavy reduction (HR) is a novel technology that could effectively improve the internal porosities and other internal quality problems in continuously cast steel, during which a large reduction deformation is implemented at and after the strand solidi...

(This article belongs to the Special Issue Refining and Casting of Steel)
  • Article
  • Open Access
6 Citations
3,320 Views
14 Pages

Experimental Study on Flexural Behavior of RC–UHPC Slabs with EPS Lightweight Concrete Core

  • Tuan-Anh Cao,
  • Manh-Tuan Nguyen,
  • Thai-Hoan Pham and
  • Dang-Nguyen Nguyen

This paper presents an experimental investigation that focuses on the flexural behavior of an innovative reinforced concrete–ultra-high performance concrete slab with an expanded polystyrene lightweight concrete core. This type of slab is propo...

(This article belongs to the Special Issue Machine Learning Applications in Sustainable Buildings)
  • Article
  • Open Access
14 Citations
4,718 Views
17 Pages

2 November 2018

There is confusion in the original design concept for the tensioning of longitudinally connected reinforcement of the CRTSII (China Railway Track System) slab ballastless track. In order to clarify the effect of tension value of longitudinal reinforc...

  • Article
  • Open Access
6 Citations
2,590 Views
18 Pages

Experimental Investigation on the Mechanical Performance of Steel-ECC Composite Girders with Corrugated Webs under Negative Moment

  • Zhou Fan,
  • Fangwen Wu,
  • Lanqing He,
  • Runbin He and ,
  • Keyang Zeng and
  • Zhuangzhuang Liu
  • + 1 author+ 0 author

21 September 2022

In order to improve the cracking performance in the negative moment region of composite continuous girder bridges with corrugated webs, engineered cementitious composite (ECC) is used instead of conventional normal concrete (NC). Web and concrete typ...

(This article belongs to the Special Issue Advances in Ultra-High Performance Concrete and Engineered Cementitious Composites)
  • Article
  • Open Access
10 Citations
1,768 Views
17 Pages

The Influence of Heat Treatment Process on the Residual Ferrite in 304L Austenitic Stainless Steel Continuous Casting Slab

  • Zhixuan Xue,
  • Kun Yang,
  • Yafeng Li,
  • Chaochao Pei and ,
  • Dongzhi Hou,
  • Qi Zhao,
  • Yang Wang,
  • Lei Chen,
  • Chao Chen and
  • Wangzhong Mu
  • + 5 authors+ 0 author

8 August 2025

This study investigates the distribution characteristics of residual ferrite in 304L austenitic stainless steel continuous casting slab and the impact of heat treatment processes on its content. Through optical microscopy (OM), thermodynamic calculat...

(This article belongs to the Special Issue Advanced Stainless Steel—from Making, Shaping, Treating to Products)
  • Article
  • Open Access
626 Views
24 Pages

Dynamic Bearing Characteristics of Cement Concrete Pavement Under Heavy-Duty Loads

  • Wentao Qu,
  • Siyuan Li,
  • Bang Xu,
  • Xiao Huang and ,
  • Qiang Li and
  • Lina Xiao
  • + 1 author+ 0 author

3 April 2026

Cement concrete is a critical pavement construction material. However, under prolonged exposure to heavy traffic loads and the combined effects of multiple factors, it frequently exhibits premature slab failure and concurrent multiple defects, severe...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
86 Views
40 Pages

Numerical Analysis of a Novel Integral Composite Frame Beam with End-Plate Connection

  • Qidong Chen,
  • Jizhuo Huang,
  • Gang Chen,
  • Yanjie Li and
  • Cheng Zhang

9 November 2026

Composite frame beams utilize the composite action between steel beams and concrete slabs to improve bearing capacity and stiffness. However, the longitudinal slab reinforcement is generally interrupted by the steel column, limiting the slab contribu...

(This article belongs to the Special Issue Advances in Green, Low-Carbon, High-Performance, and Intelligent Building Materials and Structures: 2nd Edition)
  • Article
  • Open Access
6 Citations
2,979 Views
17 Pages

28 February 2023

Experimental and numerical analyses of eight in-plane restrained slabs (1425 mm (length) × 475 mm (width) × 150 mm (thickness)) reinforced with glass fiber-reinforced polymer (GFRP) bars are reported in this paper. The test slabs were ins...

(This article belongs to the Special Issue Fiber Reinforced Polymers Applications as Reinforcement of Concrete Structures—Design Aspects, Tests and Analysis)
  • Article
  • Open Access
4 Citations
4,773 Views
16 Pages

6 March 2021

The paper presents numerical modelling and an operational experiment to forge a slab ingot P40N from 55NiCrMoV7 tool steel and the procedure for the optimization of its production. The aim of the numerical simulation of forging was to verify the exis...

(This article belongs to the Special Issue Numerical Modelling in Steel Metallurgy)
  • Article
  • Open Access
13 Citations
3,448 Views
30 Pages

19 February 2024

This research was conducted to investigate, experimentally, theoretically, and numerically, the use of CFRP materials for repairing a reinforced concrete one-way solid slab exposed to thermal shock. Nine slabs, measuring 1800 mm in length, 500 mm in...

(This article belongs to the Special Issue Fiber-Reinforced Polymers and Fiber-Reinforced Cement-Based Mortars in Repair/Strengthening Methods of Masonry and Reinforced Concrete Structural Members)
  • Article
  • Open Access
3 Citations
1,401 Views
19 Pages

Parameter Optimization Analysis of Buttressed Pile Foundation Beam Retaining Wall Under Seismic Action

  • Yonggui Lin,
  • Chunshan Yang,
  • Aoyu Xu,
  • Hui Ma and ,
  • Yadong Li and
  • Chuanzhi Wang
  • + 1 author+ 0 author

To enhance the seismic performance of the pile foundation beam retaining wall-anti-slide pile system in slope engineering, this study adopts an innovative approach combining shaking-table tests and three-dimensional numerical modeling to systematical...

(This article belongs to the Special Issue Advances in Building Foundation Engineering and Underground Structures)
  • Feature Paper
  • Article
  • Open Access
39 Citations
5,474 Views
13 Pages

Experimental Study on Two PCM Macro-Encapsulation Designs in a Thermal Energy Storage Tank

  • David Vérez,
  • Emiliano Borri,
  • Alicia Crespo,
  • Boniface Dominick Mselle and ,
  • Álvaro de Gracia,
  • Gabriel Zsembinszki and
  • Luisa F. Cabeza
  • + 2 authors+ 0 author

2 July 2021

The use of latent heat thermal energy storage is an effective way to increase the efficiency of energy systems due to its high energy density compared with sensible heat storage systems. The design of the storage material encapsulation is one of the...

(This article belongs to the Special Issue Phase Change Materials: Design and Applications)
  • Article
  • Open Access
3 Citations
2,260 Views
22 Pages

29 June 2023

The assembled hollow-core slab bridge is the most widely used beam bridge in China. With the increasing traffic volume and traffic load in China, the joints of the hollow-core slab bridge are prone to damage. In this paper, a hollow-core slab bridge...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1,091 Views
20 Pages

Mechanical Response of Two-Way Reinforced Concrete Slabs Under Combined Horizontal and Vertical Loads in Fire

  • Xing Feng,
  • Yingting Wang,
  • Xiangheng Zha,
  • Binhui Jiang and ,
  • Qingyuan Xu,
  • Wenjun Wang and
  • Faxing Ding
  • + 2 authors+ 0 author

19 August 2025

The existing analytical methods lack a reasonable explanation for the cracking and deformation response mechanism of two-way reinforced concrete (RC) slabs under combined horizontal and vertical loads during a fire. In addition, there is a lack of co...

(This article belongs to the Special Issue Resilient Building Materials and Structural Systems for Extreme Environments)
  • Article
  • Open Access
21 Citations
5,933 Views
16 Pages

5 July 2021

The main objectives of this study are to evaluate the effect of geometrical constraints of plain concrete and reinforced concrete slabs on the Wenner four-point concrete electrical resistivity (ER) test through numerical and experimental investigatio...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
13 Citations
2,230 Views
20 Pages

Flexural Behavior of Engineered Cementitious Composites (ECC) Slabs with Different Strength Grades

  • Fengjiang Qin,
  • Yang Han,
  • Xinyan Wei,
  • Xuejun Wang and ,
  • Zhigang Zhang and
  • Xiaoyue Zhang
  • + 1 author+ 0 author

30 April 2025

Engineering Cementitious Composites (ECC) has gained significant attention in civil engineering due to its excellent tensile strength, crack width control capability, and remarkable ductility. This study examines the influence of the ECC strength and...

(This article belongs to the Special Issue Experimental Study, Numerical Simulation & Structural Applications of Construction Materials—3rd Edition)
  • Article
  • Open Access
5 Citations
8,505 Views
32 Pages

Performance of FRP-Upgraded RC One-Way Ribbed Slabs with an Opening in Flexure Zone

  • Amjad Al Kallas,
  • Hussein Elsanadedy,
  • Husain Abbas,
  • Tarek Almusallam and
  • Yousef Al-Salloum

6 September 2023

Reinforced concrete (RC) one-way ribbed slabs serve as a prevalent flooring solution in the Middle East. In this region, the occurrence of openings within these slabs is frequent, particularly when making modifications to existing buildings. However,...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
443 Views
22 Pages

2 September 2026

Reinforced concrete (RC) beams undergo axial elongation during inelastic flexural deformation. In frame structures, this elongation is restrained by adjacent columns and slabs, inducing axial compression and beam overstrength, thereby amplifying forc...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
14 Citations
3,711 Views
12 Pages

17 August 2021

The volumetric changes of concrete, including drying shrinkage, are effectively controlled in steel fiber-reinforced concrete (SFRC) mixtures due to the action of the included steel fiber. The current code provision in ANSI/SDI C-2017 allows a minimu...

(This article belongs to the Special Issue Advances in High-Performance Fiber-Reinforced Concrete)
  • Article
  • Open Access
673 Views
10 Pages

A 1064 nm Deep-Etched Wide-Ridge Waveguide Slab-Coupled Photonic Crystal Semiconductor Laser

  • Jianxin Zhang,
  • Gaoben Shi,
  • Xiaoyun Liu,
  • Haizhu Sun and ,
  • Xinmin Fan,
  • Pingping Wang,
  • Yan Wang,
  • Fuyong Qin and
  • Zaifa Du
  • + 4 authors+ 0 author

Semiconductor lasers are key devices in optical communication, optical storage and other fields. Achieving single-mode, high-power and high-beam-quality output is an important research goal in laser technology. Conventional slab-coupled optical waveg...

(This article belongs to the Special Issue High-Power Laser Physics and Technology: From Fundamental Strong-Field Interactions to Industrial Applications)
  • Article
  • Open Access
4 Citations
4,705 Views
26 Pages

3 January 2023

The objective of this paper is to investigate the dynamic behaviour of post-tensioned concrete flat slabs with different geometries and damping ratios. Four groups of models with different lengths, widths, thicknesses and damping ratios designed acco...

(This article belongs to the Special Issue Achieving Sustainability in Civil and Construction Engineering through Emerging Technologies)
  • Article
  • Open Access
4 Citations
2,228 Views
17 Pages

13 July 2023

In the process of electroslag remelting (ESR) for large-sized slab ingots, controlling the surface quality of the slab ingot is challenging due to its relatively high width-to-thickness ratio. In this study, a three-dimensional dynamic mathematical m...

(This article belongs to the Special Issue Metallurgical Process: Optimization and Control)
  • Article
  • Open Access
7 Citations
4,178 Views
20 Pages

15 October 2020

The main objectives of this study are to investigate the spectral responses of a fire-damaged concrete slab using Impact-echo (IE) testing, and to develop a simplified model for interpreting the frequency shift due to heat-induced concrete damage aft...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
1 Citations
1,122 Views
27 Pages

27 March 2025

With the rapid development of urban rail transit, the floating slab vibration isolation system has become widely used in the field due to its effective vibration reduction and isolation capabilities. Traditional floating slab vibration-isolation syst...

(This article belongs to the Special Issue Advanced Design and Synthesis in Piezoelectric Smart Materials)
  • Article
  • Open Access
10 Citations
4,058 Views
21 Pages

25 February 2019

An adaptive neuro-fuzzy inference system (ANFIS)-based model was developed to predict the punching shear strength of flat concrete slabs without shear reinforcement. The model was developed using a database collected from 207 experiments available in...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
4 Citations
3,181 Views
24 Pages

A Novel PWM Signal-Generation Strategy for Pockels Cell Drivers

  • Yajun Wu,
  • Wenqing Liu,
  • Jinxin Chen,
  • Xinhui Sun and
  • Tianshu Zhang

A Pockels cell driver (PCD) can be viewed as a high-voltage pulse width generator for controlling the bi-refringence effect of electro-optical crystals. The main features of a PCD include a high repetition rate, fast on and off switching, variable pu...

  • Article
  • Open Access
1,127 Views
28 Pages

Behavior and Early-Age Performance of Continuously Reinforced Concrete Bus Pad

  • Sang Cheol Park,
  • Kang In Lee,
  • Soon Ho Baek,
  • Sang Jin Kim and
  • Seong-Min Kim

2 July 2025

The behavior of the cast-in-place continuously reinforced concrete (CRC) bus pad applied to bus stop pavement in a central bus-only lane was experimentally analyzed under environmental and moving vehicle loads, and the early-age performance of the CR...

(This article belongs to the Special Issue Sustainable Cementitious Materials for Civil and Transportation Engineering—2nd Edition)
  • Article
  • Open Access
122 Views
18 Pages

30 October 2026

Large-scale irregular cracks developed on the second-floor roof slabs of an industrial plant shortly after formwork removal. To identify the cracking mechanism and optimize the strengthening scheme, field inspection, X-ray diffraction (XRD) phase ana...

  • Article
  • Open Access
15 Citations
3,828 Views
18 Pages

Effect of Mold Width on the Flow Field in a Slab Continuous-Casting Mold with High-Temperature Velocity Measurement and Numerical Simulation

  • Jian-Qiu Liu,
  • Jian Yang,
  • Chao Ma,
  • Yi Guo and ,
  • Wen-Yuan He,
  • Chang-Liang Zhao,
  • Ren-Bo Jiang and
  • Yin-Tao Guo
  • + 3 authors+ 0 author

1 December 2021

In this paper, the effects of the width of the mold on the surface velocity, flow field pattern, turbulent kinetic energy distribution, and surface-level fluctuation in the mold were studied with measurement of the flow velocity near the surface of t...

(This article belongs to the Special Issue Advances in Ironmaking and Steelmaking Processes)
  • Article
  • Open Access
35 Citations
4,986 Views
15 Pages

9 January 2024

The utilization and incorporation of glass fiber-reinforced plastics (GFRP) in structural applications and architectural constructions are progressively gaining prominence. Therefore, this paper experimentally and numerically investigates the use of...

(This article belongs to the Special Issue The Use of Fibers in the Field of Structural and Earthquake Engineering: Experimental Measurements and Numerical Simulations)

of 3