Skip to Content

49 Results Found

  • Article
  • Open Access
462 Views
20 Pages

17 July 2026

Internal cracks during slab bending and straightening are continuous-casting defects. Existing caster curves rely on plastic deformation, while curvature variation is concentrated within short sections, causing excessive strain rates and increasing t...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
8 Citations
3,155 Views
14 Pages

Inclusion Behavior in a Curved Bloom Continuous Caster with Mold Electromagnetic Stirring

  • Weixian Wang,
  • Shifu Chen,
  • Hong Lei,
  • Hongwei Zhang and ,
  • Hongjin Xiong and
  • Maofa Jiang
  • + 1 author+ 0 author

26 November 2020

Mold electromagnetic stirring (M-EMS) has been widely used in many continuous casters. In order to have a deep insight into the collision-coalescence among inclusions under M-EMS by a Eulerian approach, the effects of Archimedes electromagnetic force...

  • Article
  • Open Access
6 Citations
3,001 Views
26 Pages

Liquid Core Detection and Strand Condition Monitoring in a Continuous Caster Using Optical Fiber

  • Deva Prasaad Neelakandan,
  • Dinesh Reddy Alla,
  • Jie Huang and
  • Ronald J. O’Malley

14 December 2022

Real-time monitoring of the liquid core position during the continuous casting of steel has been demonstrated using low-cost distributed optical-fiber-based strain sensors. These sensors were installed on the containment roll support structures in th...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
25 Citations
5,691 Views
20 Pages

11 June 2021

Electromagnetic fields have emerged as powerful tools for addressing current problems in thin slab continuous casting processes in the iron and steel industry. Substantial studies have been undertaken on the fundamental effects of electromagnetic bra...

(This article belongs to the Special Issue Numerical Modeling of Metallurgical Processes: Continuous Casting and Electroslag Remelting)
  • Article
  • Open Access
23 Citations
3,984 Views
23 Pages

Microstructural Evolution, Hardness and Wear Resistance of WC-Co-Ni Composite Coatings Fabricated by Laser Cladding

  • Gibeom Kim,
  • Yong-Chan Kim,
  • Jae-Eock Cho,
  • Chang-Hee Yim and ,
  • Deok-Su Yun,
  • Tae-Gyu Lee,
  • Nam-Kyu Park,
  • Rae-Hyung Chung and
  • Dae-Geun Hong
  • + 4 authors+ 0 author

30 April 2024

This study investigated how process parameters of laser cladding affect the microstructure and mechanical properties of WC-12Co composite coating for use as a protective layer of continuous caster rolls. WC-Co powders, WC-Ni powders, and Ni-Cr alloy...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
1 Citations
1,593 Views
20 Pages

22 September 2025

The existing continuous caster layout curves cause plastic deformation of slabs during bending and straightening segments, while no effective deformation occurs in the basic arc segment, which tends to induce defects, such as cracks, and compromise s...

  • Article
  • Open Access
3 Citations
2,549 Views
11 Pages

Influence of Segmented Rolls on Homogeneity of Cooling in Continuous Casting

  • Jan Kominek,
  • Tomas Luks,
  • Michal Pohanka and
  • Jong-Yeon Hwang

2 August 2021

This paper deals with secondary cooling in a continuous caster. In particular, it deals with cooling inhomogeneity caused by spray arrangement and segmented rolls used for leading the strand. The cooling section is placed under the mold. Segmented ro...

(This article belongs to the Special Issue Advances in the Continuous Casting of Steel)
  • Article
  • Open Access
5 Citations
3,032 Views
19 Pages

Application of Electromagnetic Braking to Minimize a Surface Wave in a Continuous Caster

  • Saswot Thapa,
  • Mingqian Wang,
  • Armin K. Silaen,
  • Mauro E. Ferreira and ,
  • Wesley Rollings and
  • Chenn Zhou
  • + 1 author+ 0 author

24 January 2023

The turbulent flow in the mold region drastically influences the quality of steel produced during continuous casting. The flow itself can lead to surface defects or slag entrainment based on the formation. A high surface wave can lead to fluctuations...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
7 Citations
2,743 Views
18 Pages

29 March 2022

Understanding the essence of the flow oscillations within a submerged-entry nozzle (SEN) is essential to control flow patterns in the continuous casting mold and consequently increase the superficial quality of steel products. A numerical study of th...

(This article belongs to the Special Issue Metallurgical Process Simulation and Optimization)
  • Feature Paper
  • Article
  • Open Access
12 Citations
5,101 Views
34 Pages

21 July 2022

A new model of particle entrapment during continuous casting of steel is presented, which includes the effects of multiphase flow from argon gas injection and thermal buoyancy from superheat in the strand. The model simulates three different capture...

(This article belongs to the Special Issue High-Efficiency and High-Quality Continuous Casting Processes)
  • Article
  • Open Access
7 Citations
3,792 Views
22 Pages

Experimental Analysis of the Influence of the Sliding-Gate Valve on Submerged Entry Nozzle Outlet Jets

  • Jesus Gonzalez-Trejo,
  • Raul Miranda-Tello,
  • Ruslan Gabbasov,
  • Cesar A. Real-Ramirez and
  • Francisco Cervantes-de-la-Torre

20 January 2024

This work studies how the sliding-gate valve (SGV) modifies the features and the dynamic behavior of the outlet jets for flat-bottom and well-bottom bifurcated submerged entry nozzles (SENs) used in continuous casting machines. Three conditions for t...

(This article belongs to the Special Issue Pipe Flow: Research and Applications)
  • Article
  • Open Access
14 Citations
2,664 Views
15 Pages

Hybrid-Input FCN-CNN-SE for Industrial Applications: Classification of Longitudinal Cracks during Continuous Casting

  • Davi Alberto Sala,
  • Andy Van Yperen-De Deyne,
  • Erik Mannens and
  • Azarakhsh Jalalvand

6 October 2023

In the presented research, machine learning methods were applied to the prediction of longitudinal cracks in steel slabs during continuous casting. We employ a deep learning approach to process 68 thermocouple signals as a multivariate time series (M...

(This article belongs to the Special Issue Advanced Applications of Artificial Intelligence in Metallic Materials Processing)
  • Article
  • Open Access
2 Citations
1,824 Views
18 Pages

A Practical 1D Approach for Real-Time Prediction of Argon Flow and Pressure in Continuous Casting of Steel

  • Hyunjin Yang,
  • Bong-Min Jin,
  • Hyeonjin Kim,
  • Seungwon Seo and
  • Seunghyun Sim

1 September 2025

The pressure and flow rate of an argon line embedded within a stopper rod serve as useful industrial indicators and control factors for mitigating air aspiration into the Submerged Entry Nozzle (SEN) during the continuous casting of steel. This manus...

(This article belongs to the Special Issue Advanced Metal Casting Processes: Latest Research, Insights, and Challenges)
  • Article
  • Open Access
10 Citations
4,292 Views
12 Pages

17 June 2021

Štore Steel Ltd. is one of the major flat spring steel producers in Europe. Until 2016 the company used a three-strand continuous casting machine with 6 m radius, when it was replaced by a completely new two-strand continuous caster with 9 m radius....

(This article belongs to the Special Issue Applied Artificial Intelligence in Steelmaking)
  • Article
  • Open Access
8 Citations
4,210 Views
11 Pages

13 May 2019

AISI M2 steel was smelted in a 150 kg medium-frequency induction furnace and cast to form round billets with a cross-section diameter of 100 mm via a vertical continuous caster and sand mold. The secondary dendrite arm spacing (λ2), cooling ra...

  • Feature Paper
  • Article
  • Open Access
5 Citations
4,050 Views
23 Pages

Analysis of Non-Symmetrical Heat Transfers during the Casting of Steel Billets and Slabs

  • Adán Ramírez-López,
  • Omar Dávila-Maldonado,
  • Alfonso Nájera-Bastida,
  • Rodolfo D. Morales and ,
  • Jafeth Rodríguez-Ávila and
  • Carlos Rodrigo Muñiz-Valdés
  • + 1 author+ 0 author

31 August 2021

The current automation of steelmaking processes is capable of complete control through programmed hardware. However, many metallurgical and operating factors, such as heat transfer control, require further studies under industrial conditions. In this...

(This article belongs to the Special Issue Advanced Tundish Metallurgy and Clean Steel Technology)
  • Article
  • Open Access
16 Citations
6,250 Views
22 Pages

An Intelligent Logic-Based Mold Breakout Prediction System Algorithm for the Continuous Casting Process of Steel: A Novel Study

  • Md Obaidullah Ansari,
  • Joyjeet Ghose,
  • Somnath Chattopadhyaya,
  • Debasree Ghosh and ,
  • Shubham Sharma,
  • Prashant Sharma,
  • Abhinav Kumar,
  • Changhe Li,
  • Rajesh Singh and
  • Sayed M. Eldin
  • + 5 authors+ 0 author

5 December 2022

Mold breakout is one of the significant problems in a continuous casting machine (caster). It represents one of the key areas within the steel production facilities of a steel plant. A breakout event on a caster will always cause safety hazards, high...

(This article belongs to the Special Issue Advanced Manufacturing Technology and Systems, 2nd Edition)
  • Article
  • Open Access
7 Citations
4,453 Views
18 Pages

Flow Control Based on Feature Extraction in Continuous Casting Process

  • Shereen Abouelazayem,
  • Ivan Glavinić,
  • Thomas Wondrak and
  • Jaroslav Hlava

1 December 2020

The flow structure in the mold of a continuous steel caster has a significant impact on the quality of the final product. Conventional sensors used in industry are limited to measuring single variables such as the mold level. These measurements give...

(This article belongs to the Special Issue Tomography Sensing Technologies)
  • Article
  • Open Access
4 Citations
5,132 Views
12 Pages

Method of Verification of Carbon Segregation Ratio Determined with Experimental Methods

  • Jan Falkus,
  • Katarzyna Miłkowska-Piszczek,
  • Paweł Krajewski and
  • Tomasz Ropka

10 April 2020

The problem of macrosegregation of alloying elements occurring during cast strand solidification in the continuous casting process is still valid; it is the subject of numerous experiments and theoretical considerations. A large percentage of this re...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
9 Citations
3,846 Views
29 Pages

Measurement and Model-Based Control of Solidification in Continuous Casting of Steel Billets

  • Martin Schlautmann,
  • Marc Köster,
  • Waldemar Krieger,
  • Matthias Groll and ,
  • Ralf Schuster,
  • Jörg Bellmann and
  • Piero Frittella
  • + 2 authors+ 0 author

9 January 2023

A laser vibrometer system in combination with appropriate artificial intelligence methods for clustering of the measured vibration spectra was tested at a continuous steel casting machine to receive information on the solidification status of the str...

(This article belongs to the Special Issue Thermophysics and Heat Transfer)
  • Review
  • Open Access
53 Citations
26,320 Views
12 Pages

Continuous Casting Practices for Steel: Past, Present and Future

  • Roderick I. L. Guthrie and
  • Mihaiela M. Isac

18 May 2022

This historical review of casting methods used to produce sheets of steel for automobiles, household products, rocket bodies, etc., all point toward the development of one-step commercial processes, which are capable of casting liquid steel directly...

(This article belongs to the Special Issue Modeling and Simulation of Metallurgical Processes in Ironmaking and Steelmaking)
  • Article
  • Open Access
10 Citations
3,685 Views
21 Pages

Contactless Inductive Flow Tomography for Real-Time Control of Electromagnetic Actuators in Metal Casting

  • Ivan Glavinić,
  • Vladimir Galindo,
  • Frank Stefani,
  • Sven Eckert and
  • Thomas Wondrak

30 May 2022

Flow control of liquid metals based on the actual flow condition is important in many metallurgical applications. For instance, the liquid steel flow in the mould of a continuous caster strongly influences the product quality. The flow can be modifie...

(This article belongs to the Special Issue Tomographic Sensors for Industrial Process Control)
  • Article
  • Open Access
6 Citations
5,223 Views
14 Pages

25 March 2019

Control of the roll gap of the caster segment is one of the key parameters for ensuring the quality of a slab in continuous casting. In order to improve the precision and timeliness of the roll gap value control, we proposed a rolling gap value predi...

(This article belongs to the Special Issue Continuous Casting)
  • Article
  • Open Access
13 Citations
5,273 Views
22 Pages

Modeling of Inclusion Capture in a Steel Slab Caster with Vertical Section and Bending

  • Seong-Mook Cho,
  • Brian G. Thomas,
  • Jong-Yeon Hwang,
  • Jong-Geun Bang and
  • Il-Sin Bae

17 April 2021

Particles in molten steel, including argon-gas bubbles, slag droplets, and non-metallic inclusions, are removed into the surface-slag layer or captured by the solidifying steel-shell during continuous steel casting. Captured particles often become se...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
3 Citations
2,946 Views
11 Pages

Application of Graphite Electrode Plasma Heating Technology in Continuous Casting

  • Yong Wang,
  • Jingxin Song,
  • Nailiang Cheng,
  • Zhenhe Guo and ,
  • Jingshe Li,
  • Shufeng Yang,
  • Mengjing Zhao and
  • Cun Wang
  • + 3 authors+ 0 author

1 April 2022

In this study, the industrial, experimental effect of a plasma heating system in the form of graphite electrode in the tundish of double-strand slab caster was evaluated for the first time. The system uses three graphite electrodes, two of which are...

(This article belongs to the Topic Metallurgical and Materials Engineering)
  • Feature Paper
  • Article
  • Open Access
20 Citations
4,862 Views
12 Pages

17 March 2021

The solidifying steel follows highly nonlinear thermo-mechanical behavior depending on the loading history, temperature, and metallurgical phase fraction calculations (liquid, ferrite, and austenite). Numerical modeling with a computationally challen...

(This article belongs to the Special Issue Material Modeling in Multiphysics Simulation)
  • Article
  • Open Access
7 Citations
5,178 Views
10 Pages

20 December 2021

Industrial experiments of mechanical soft reduction in continuous casting were conducted in the present study aiming to improve the internal quality of the bearing steel blooms. Two methods were developed to verify the solidification model for a reli...

(This article belongs to the Special Issue High-Efficiency and High-Quality Continuous Casting Processes)
  • Feature Paper
  • Article
  • Open Access
20 Citations
5,089 Views
20 Pages

21 April 2023

A digital-twin-model-based optimal control system is presented for the steel continuous casting process. The system is designed for the coordinated optimization and dynamic control of secondary cooling and final electromagnetic stirring (FEMS), and i...

(This article belongs to the Special Issue Advanced Solidification Processing and Casting Technologies)
  • Article
  • Open Access
19 Citations
4,351 Views
17 Pages

Fine Description of Multi-Process Operation Behavior in Steelmaking-Continuous Casting Process by a Simulation Model with Crane Non-Collision Constraint

  • Jianping Yang,
  • Jiangshan Zhang,
  • Min Guan,
  • Yujie Hong and ,
  • Shan Gao,
  • Weida Guo and
  • Qing Liu
  • + 2 authors+ 0 author

5 October 2019

The fine description of multi-process operation behavior in steelmaking-continuous casting process is an important foundation for the improvement of production scheduling in steel plants. With sufficient consideration on non-collision movements among...

(This article belongs to the Special Issue Mathematical Modeling and Simulation in Ironmaking and Steelmaking)
  • Review
  • Open Access
1 Citations
705 Views
34 Pages

9 July 2026

The paper presents a critical review of the key work published to date on the hot ductility of steels in relation to the problem of cracking during continuous casting, including recent publications in the field. Laboratory testing methods that are mo...

(This article belongs to the Special Issue High-Strength Steels: Transformation Behavior, Microstructure Control and Performance Optimization)
  • Article
  • Open Access
5 Citations
4,179 Views
12 Pages

Study on Mushy Zone Coefficient in Solidification Heat Transfer Mathematical Model of Thin Slab with High Casting Speed

  • Zhijun Ding,
  • Yuekai Xue,
  • Limin Zhang,
  • Chenxiao Li and ,
  • Shuhuan Wang and
  • Guolong Ni
  • + 1 author+ 0 author

30 October 2023

When the casting speed of the thin slab continuous caster is increased, the ratios of the solid and liquid phases in the solidification front of the molten steel in the mold change, which affects the thickness of the solidified shell. In order to acc...

(This article belongs to the Special Issue Renewable Energy and Green Metallurgy Technology)
  • Article
  • Open Access
8 Citations
3,404 Views
14 Pages

16 June 2020

The cleanliness of the casting blanks could seriously affect the quality of downstream products. Recently, ultrasound technology has been introduced to detect the inclusions in metal materials. However, due to the anisotropy of the material crystal,...

  • Article
  • Open Access
20 Citations
4,129 Views
13 Pages

Fluid Flow Control in a Billet Tundish during Steel Filling Operations

  • Rodolfo D. Morales,
  • Javier Guarneros,
  • Kinnor Chattopadhyay,
  • Alfonso Nájera-Bastida and
  • Jafeth Rodríguez

30 March 2019

The startup of casting sequences in continuous casting of steel using three different turbulence inhibitors were modeled and simulated through the multiphase volume of fluid model (VOF) in a four-strand tundish. In the actual caster, one of the inhib...

  • Article
  • Open Access
1 Citations
1,663 Views
22 Pages

Impacts of Cooling Reduction Due to Spray Nozzle Clogging on Shell Formation in Continuous Casting of Steel

  • Dianzhi Meng,
  • Sai Bhuvanesh Nandipati,
  • Armin K. Silaen,
  • Yufeng Wang and ,
  • Sunday Abraham,
  • Dallas Brown and
  • Chenn Zhou
  • + 2 authors+ 0 author

4 October 2025

In steel continuous casting, the secondary cooling zone is usually equipped with air-mist nozzles. Spray nozzle clogging is a common problem that reduces cooling efficiency and affects product quality. This study uses a 3D CFD model to investigate it...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
4 Citations
1,519 Views
15 Pages

A Data-Driven Approach for Internal Crack Prediction in Continuous Casting of HSLA Steels Using CTGAN and CatBoost

  • Mengying Geng,
  • Haonan Ma,
  • Shuangli Liu,
  • Zhuosuo Zhou and ,
  • Lei Xing,
  • Yibo Ai and
  • Weidong Zhang
  • + 2 authors+ 0 author

31 July 2025

Internal crack defects in high-strength low-alloy (HSLA) steels during continuous casting pose significant challenges to downstream processing and product reliability. However, due to the inherent class imbalance in industrial defect datasets, conven...

(This article belongs to the Special Issue Latest Developments in Advanced Machining Technologies for Materials)
  • Article
  • Open Access
27 Citations
4,624 Views
13 Pages

31 July 2021

For the purpose of increasing the capacity of an Angang Strip Production (ASP) continuous caster and the surface quality of a medium-thin slab with mold sections of 150 × (1020–1540) mm2, the present work investigated the influences of the submerged...

(This article belongs to the Special Issue Numerical and Physical Modeling in Steel Refining and Casting)
  • Feature Paper
  • Review
  • Open Access
94 Citations
18,532 Views
38 Pages

23 April 2019

This paper reviews the current state of the art in the application of electromagnetic forces to control fluid flow to improve quality in continuous casting of steel slabs. Many product defects are controlled by flow-related phenomena in the mold regi...

(This article belongs to the Special Issue Continuous Casting)
  • Article
  • Open Access
28 Citations
6,720 Views
15 Pages

6 May 2018

Inclusions entrapped by the solidifying front during continuous casting would deteriorate the properties of the final steel products. In order to investigate the inclusion motion and the entrapment during the full solidification in curved billet cast...

(This article belongs to the Special Issue Continuous Casting)
  • Article
  • Open Access
8 Citations
3,206 Views
13 Pages

Bending and Straightening of a Medium Carbon Steel Continuous Casting Slab with Low Temperature End Plastic Groove

  • Jingbo Yang,
  • Fujun Zhang,
  • Jingshe Li,
  • Wei Liu and ,
  • Tiantian Wang,
  • Hang Yuan and
  • Daqiang Cang
  • + 2 authors+ 0 author

1 April 2022

The high temperature brittleness range of medium carbon microalloyed steel under an actual continuous casting process was determined by the high temperature tensile test. The test results revealed that only a third of the brittle temperature range fr...

  • Article
  • Open Access
8 Citations
1,938 Views
17 Pages

17 August 2023

In the current study, the transient flow characteristics on the top surface of a steel slab continuous casting strand were numerically investigated using a large eddy simulation combined with volume of fluid (LES + VOF) model. The validation of numer...

(This article belongs to the Special Issue Metallurgical Process Simulation and Optimization—2nd Volume)
  • Article
  • Open Access
2 Citations
1,485 Views
37 Pages

30 April 2026

Accurate thermal analysis of steel solidification and heat transfer in the continuous casting mold is essential for understanding and controlling solidification, shell thickness uniformity, interfacial gap phenomena, and defects such as cracks and br...

(This article belongs to the Special Issue Advanced Simulation and Modeling Technologies of Metallurgical Processes—2nd Edition)
  • Article
  • Open Access
4 Citations
8,184 Views
8 Pages

Use of NTRIP for Optimizing the Decoding Algorithm for Real-Time Data Streams

  • Zhanke He,
  • Wenda Tang,
  • Xuhai Yang,
  • Liming Wang and
  • Jihua Liu

10 October 2014

As a network transmission protocol, Networked Transport of RTCM via Internet Protocol (NTRIP) is widely used in GPS and Global Orbiting Navigational Satellite System (GLONASS) Augmentation systems, such as Continuous Operational Reference System (COR...

(This article belongs to the Special Issue Wireless Sensor Networks and the Internet of Things)
  • Article
  • Open Access
3 Citations
1,106 Views
16 Pages

A Meshless Multiscale and Multiphysics Slice Model for Continuous Casting of Steel

  • Božidar Šarler,
  • Boštjan Mavrič,
  • Tadej Dobravec and
  • Robert Vertnik

10 September 2025

A simple Lagrangian travelling slice model has been successfully used to predict the relations between the process parameters and the strand temperatures in the continuous casting of steel. The present paper aims to include a simple macrosegregation,...

(This article belongs to the Special Issue Advanced Simulation and Modeling Technologies of Metallurgical Processes—2nd Edition)
  • Article
  • Open Access
29 Citations
5,714 Views
19 Pages

Productivity Enhancement by Prediction of Liquid Steel Breakout during Continuous Casting Process in Manufacturing of Steel Slabs in Steel Plant Using Artificial Neural Network with Backpropagation Algorithms

  • Md Obaidullah Ansari,
  • Somnath Chattopadhyaya,
  • Joyjeet Ghose,
  • Shubham Sharma and ,
  • Drazan Kozak,
  • Changhe Li,
  • Szymon Wojciechowski,
  • Shashi Prakash Dwivedi,
  • Huseyin Cagan Kilinc and
  • Dominik Walczak
  • + 6 authors+ 1 author

17 January 2022

Breakout is one of the major accidents that often arise in the continuous casting shops of steel slabs in Bokaro Steel Plant, Jharkhand, India. Breakouts cause huge capital loss, reduced productivity, and create safety hazards. The existing system is...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
7 Citations
2,394 Views
17 Pages

15 February 2024

The influence of Ti on the behavior of hot ductility was examined in four different Ti-containing micro-alloyed steels with a constant content of Nb. Thermomechanical investigations using a dilatometer were carried out to simulate the conditions duri...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
6 Citations
4,105 Views
22 Pages

Simulation Model of a Steelmaking–Continuous Casting Process Based on Dynamic-Operation Rules

  • Xin Shao,
  • Qing Liu,
  • Hongzhi Chen,
  • Jiangshan Zhang and ,
  • Shan Gao and
  • Shaoshuai Li
  • + 1 author+ 0 author

3 September 2024

The steelmaking–continuous casting process (SCCP) is a complex manufacturing process which exhibits the distinct features of process manufacturing. The SCCP involves a variety of production elements, such as multiple process routes, a wide arra...

(This article belongs to the Special Issue Metallurgical Process Simulation and Optimization—2nd Volume)
  • Article
  • Open Access
5 Citations
2,183 Views
13 Pages

27 February 2025

The twin-roll casting (TRC) process has gained significant attention for aluminum sheet production due to its cost-effectiveness and high processing efficiency. However, controlling the initial grain structure of TRC strips remains challenging due to...

(This article belongs to the Special Issue Development of Advanced Aluminum and Magnesium Alloys: Microstructure, Mechanical Properties and Processing—2nd Edition)
  • Article
  • Open Access
4 Citations
3,144 Views
26 Pages

28 April 2025

This work introduces a 0.6-scale water model of the continuous slab-casting process and a MATLAB-based model to study the effects of non-primed and multiphase flow on pressure and flow rate. The water model uses stopper-rod flow control and features...

(This article belongs to the Special Issue Multiphase Flow for Industry Applications)
  • Article
  • Open Access
1,729 Views
27 Pages

HPC: A Computational Benchmark of Classical, Parallel, and Hybrid Metaheuristics for QUBO-Based Suspension Geometry Optimization

  • Muhammad Waqas Arshad,
  • Stefano Lodi,
  • Omair Ashraf,
  • Muhammad Haseeb Rasool and
  • Syed Rizwan Hassan

23 February 2026

The calibration of suspension geometry involves highly nonlinear kinematic relationships and leads to challenging optimization landscapes that are difficult to explore efficiently with classical local methods. Quadratic Unconstrained Binary Optimizat...

(This article belongs to the Special Issue Advances in Vehicle Suspension System Optimization and Control)