Skip to Content

292 Results Found

  • Article
  • Open Access
1,038 Views
20 Pages

Pultrusion is an efficient continuous manufacturing process for fiber-reinforced polymer (FRP) composites, but conventional open-bath impregnation has limitations such as resin exposure, quality variation, and resin loss. To overcome these limitation...

(This article belongs to the Section Composites Manufacturing and Processing)
  • Feature Paper
  • Article
  • Open Access
45 Citations
8,531 Views
12 Pages

13 October 2016

Hole quality plays a crucial role in the production of close-tolerance holes utilized in aircraft assembly. Through drilling experiments of carbon fiber-reinforced plastic composites (CFRP), this study investigates the impact of varying drilling feed...

(This article belongs to the Special Issue Machining of Composites and Multi-Stacks of Aerospace Materials)
  • Article
  • Open Access
37 Citations
5,255 Views
10 Pages

Compliant Micron-Sized Patterned InGaN Pseudo-Substrates Utilizing Porous GaN

  • Shubhra S. Pasayat,
  • Chirag Gupta,
  • Yifan Wang,
  • Steven P. DenBaars and ,
  • Shuji Nakamura,
  • Stacia Keller and
  • Umesh K. Mishra
  • + 2 authors+ 0 author

4 January 2020

The compliant behavior of densely packed 10 × 10 µm2 square patterned InGaN layers on top of porous GaN is demonstrated. The elastic relaxation of the InGaN layers is enabled by the low stiffness of the porous GaN under layer. High resolu...

  • Article
  • Open Access
480 Views
14 Pages

23 June 2026

This study evaluated the retention force between milled polyetheretherketone (PEEK) posts with different surface treatments and resin composites for core build-up, and the effect of thermal cycling on the retention force. Four groups of PEEK posts we...

(This article belongs to the Special Issue Advanced Materials and Smart Technologies for Dental Implants and Prosthodontics)
  • Article
  • Open Access
2 Citations
1,690 Views
23 Pages

14 October 2025

This study investigates the effect of silylation and cellulose loading on the mechanical properties of epoxy composites. We use the hydrolyzed 3-Aminopropyltriethoxysilane (KH550) as a crosslinker for epoxy and as a coupling agent for cellulose. The...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
6 Citations
3,395 Views
18 Pages

10 March 2023

Graphene/copper matrix composites have a wide range of application prospects, but the mechanical properties of the interface have been one of the key problems restricting their wide application. In this paper, the mechanical behaviors at the interfac...

  • Article
  • Open Access
4 Citations
3,507 Views
14 Pages

Study of Strain-Hardening Behaviour of Fibre-Reinforced Alkali-Activated Fly Ash Cement

  • Hyuk Lee,
  • Vanissorn Vimonsatit,
  • Priyan Mendis and
  • Ayman Nassif

3 December 2019

This paper presents a study of parameters affecting the fibre pull out capacity and strain-hardening behaviour of fibre-reinforced alkali-activated cement composite (AAC). Fly ash is a common aluminosilicate source in AAC and was used in this study t...

(This article belongs to the Special Issue Supplementary Cementitious Materials in Concrete)
  • Article
  • Open Access
25 Citations
5,288 Views
17 Pages

13 December 2018

Due to their excellent properties and two-dimensional geometry, graphenes (Grs) have been widely used as reinforced fillers in graphene/aluminum nanolaminated composite (GANC). The separation and slippage behavior of the GANC is highly dependent on t...

  • Article
  • Open Access
1 Citations
1,972 Views
13 Pages

Reduced Graphene Oxide Reinforces Boron Carbide with High-Pressure and High-Temperature Sintering

  • Xiaonan Wang,
  • Dianzhen Wang,
  • Kaixuan Rong,
  • Qiang Tao and
  • Pinwen Zhu

28 November 2024

Introducing a second phase has been an effective way to solve the brittleness of boron carbide (B4C) for its application. Though reduced graphene oxide (rGO) is an ideal candidate for reinforcing the B4C duo’s two-dimensional structure and exce...

  • Article
  • Open Access
72 Citations
13,624 Views
18 Pages

The Effects of Strain Rates on Mechanical Properties and Failure Behavior of Long Glass Fiber Reinforced Thermoplastic Composites

  • Junjia Cui,
  • Shaoluo Wang,
  • Shuhao Wang,
  • Guangyao Li and ,
  • Peilin Wang and
  • Chengsong Liang
  • + 1 author+ 0 author

5 December 2019

Long glass fiber reinforced thermoplastic composites have been increasingly used in automotive parts due to their excellent mechanical properties and recyclability. However, the effects of strain rates on the mechanical properties and failure mechani...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
19 Citations
4,123 Views
18 Pages

Optimization of Thermoplastic Pultrusion Parameters of Jute and Glass Fiber-Reinforced Polypropylene Composite

  • Ponlapath Tipboonsri,
  • Supaaek Pramoonmak,
  • Putinun Uawongsuwan and
  • Anin Memon

27 December 2023

Thermoplastic pultrusion is a suitable process for fabricating continuous unidirectional thermoplastics with a uniform cross-section, high mechanical properties due to continuous fiber reinforcement, low cost, and suitability for mass production. In...

(This article belongs to the Special Issue Development in Fiber-Reinforced Polymer Composites)
  • Article
  • Open Access
3 Citations
2,795 Views
17 Pages

28 September 2021

Strain-hardening cement-based composites are a promising class of materials for a wide variety of applications due to their considerable tensile strength and pronounced ductility caused by the development of multiple fine cracks. Nevertheless, the sa...

(This article belongs to the Special Issue Cyclic Deterioration of Concrete)
  • Article
  • Open Access
24 Citations
5,521 Views
14 Pages

10 February 2022

Pultrusion of thermoplastic composites has been the hotspot of manufacturing high-performance thermoplastic composites in recent years. The optimization of process parameters in the pultrusion usually needed repeated attempts, which wasted lots of ma...

(This article belongs to the Special Issue Advanced Polymer Composite Materials: Processing, Modeling, Properties and Applications)
  • Article
  • Open Access
7 Citations
3,340 Views
22 Pages

Suction anchors play a crucial role as marine supporting infrastructure within mooring systems. In engineering practice, the composite load comprising nonlinear waves and cyclic pull-out loads can have adverse effects on the seabed soil, posing a thr...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
24 Citations
7,554 Views
14 Pages

Research on Tensile Properties of Carbon Fiber Composite Laminates

  • Jiayi Wang,
  • Lifeng Chen,
  • Wei Shen and
  • Lvtao Zhu

8 June 2022

In order to study the thread tensile performance of carbon fiber composite laminates, the connection between the test piece, connecting bolts, bushings, and the composite matrix, was leveraged for loading, and combined with an ultra-sound scanning im...

(This article belongs to the Special Issue Smart Textile and Polymer Materials)
  • Article
  • Open Access
2 Citations
1,873 Views
17 Pages

Pull-Out Progressive Damage and Failure Analysis of Laminated Composite Bolted Joints

  • Zhaowei Zeng,
  • Qixiang Fan,
  • Feng Liao,
  • Gang Liu and
  • Jianwei Yan

24 November 2024

Laminated composite bolted joints are increasingly used in the aerospace field, and their damage and failure behavior has been studied in depth. In view of the complexity and stability requirements of laminated composite bolted structures, accurate p...

(This article belongs to the Special Issue Additive Manufacturing and Microstructure Characteristics of Metallic Material)
  • Article
  • Open Access
1 Citations
683 Views
19 Pages

21 April 2026

Iron-based shape memory alloy (Fe-SMA) fibers can enhance cementitious composites through both crack bridging and thermally activated recovery stresses. Since fiber pull-out governs load transfer at the micro scale, understanding the combined effects...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
16 Citations
6,198 Views
17 Pages

Analysis of CFRP Joints by Means of T-Pull Mechanical Test and Ultrasonic Defects Detection

  • Caterina Casavola,
  • Fania Palano,
  • Francesco De Cillis,
  • Angelo Tati and ,
  • Roberto Terzi and
  • Vincenza Luprano
  • + 1 author+ 0 author

18 April 2018

Defects detection within a composite component, with the aim of understanding and predicting its mechanical behavior, is of great importance in the aeronautical field because the irregularities of the composite material could compromise functionality...

(This article belongs to the Special Issue Carbon Fiber Reinforced Polymers)
  • Feature Paper
  • Article
  • Open Access
4 Citations
3,047 Views
13 Pages

Electrohydraulic expansion joining has great potential for joining the light weight and high strength thin-walled pipes due to its high strain rate. Based on the central composite design (CCD) of response surface methodology, multiple experiments of...

(This article belongs to the Special Issue Advanced Joining Technologies of Alloys and Composites in the Automotive, Aeronautic and Astronautic Fields)
  • Article
  • Open Access
558 Views
25 Pages

Adhesion-Promoting Properties of Plasma Polymer Layers in Epoxy Resin for Glass Fiber-Reinforced Plastics

  • Markus Haag,
  • Mariagrazia Troia,
  • Patrick Delfs,
  • Pascal Holste and ,
  • Dhia Ben Salem,
  • Lea Senneka,
  • Oliver I. Strube,
  • Deniz Yesilyurt,
  • Andreas Schulz and
  • Thomas Gries
  • + 7 authors+ 2 authors

27 August 2026

Glass fiber-reinforced plastics (GFRPs) rely on strong fiber–matrix adhesion to achieve optimal mechanical performance. However, conventional sizing systems provide only partial surface coverage and may limit interfacial bonding. The current st...

(This article belongs to the Special Issue Polymer Composites and Fibers, 4th Edition)
  • Article
  • Open Access
3 Citations
2,409 Views
14 Pages

Experimental Study on Bond Behavior of Glass Textile Mesh in Earth-Based Matrix

  • Weinan Han,
  • Feng Wu,
  • Yugang Zhao,
  • Haitao Wang and
  • Shenglin Chu

29 January 2023

The bond behavior between the textile and the earth-based matrix determined the reinforcement effectiveness of the composite systems. This paper presented a pull-out experimental study on the glass textile mesh reinforced earth-based matrix. The bond...

(This article belongs to the Special Issue Advanced Composite Materials for Structural Maintenance, Repair, and Control)
  • Article
  • Open Access
8 Citations
4,477 Views
12 Pages

Controlling the Crack Propagation Path of the Veil Interleaved Composite by Fusion-Bonded Dots

  • Guangchang Chen,
  • Jindong Zhang,
  • Gang Liu,
  • Puhui Chen and
  • Miaocai Guo

30 July 2019

This study investigated the effect of the fusion-bonded dots of veil interleaves on the crack propagation path of the interlaminar fracture of continuous carbon fiber reinforced epoxy resin. Two thin fiber layers (i.e., nylon veil (NV) with fusion-bo...

(This article belongs to the Special Issue Polymer Matrix Composites for Advanced Applications)
  • Article
  • Open Access
27 Citations
6,233 Views
23 Pages

28 November 2020

Carbon fibre-reinforced polypropylene composite filaments were fabricated via the extrusion–pultrusion method. One of the important factors influencing composites’ filament processability and structural properties is the impregnation qual...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
4 Citations
2,883 Views
19 Pages

8 November 2022

(1) Background: The effects of prickly burnet (Sarcopoterium spinosum) control measures (pulling out, burning and cutting) and grazing on the botanical composition, grazeable dry matter (GDM) yield and nutritional values of rangeland were investigate...

(This article belongs to the Collection Novel Animal Feeds, Forage Crops, and Cultivation Strategies for Enhancing Livestock Nutrition and Ecosystem Services)
  • Article
  • Open Access
1 Citations
3,069 Views
11 Pages

Repair Composite Adhesion Strength: A Comparison of Testing Methods

  • Khrystyna Moskalova,
  • Serhii Hedulian,
  • Nadiia Antoniuk and
  • Mario Šercer

20 November 2024

The adhesive strength of repair composites to concrete substrates was assessed through both Ukrainian and European standard test methods. The types of adhesion loss observed included adhesive failure along the contact layer (AF-S), and cohesion failu...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
9 Citations
5,967 Views
17 Pages

17 February 2021

This study aimed to develop an extrusion and pultrusion system for producing carbon fiber-filled thermoplastic pellets. The extruder delivers a plastic melt to an impregnation die in sufficient volume and is pulled out along with the fibers. The fibe...

(This article belongs to the Section Machine Design and Theory)
  • Article
  • Open Access
269 Citations
18,892 Views
18 Pages

Thermal and Mechanical Properties of Bamboo Fiber Reinforced Epoxy Composites

  • Kai Zhang,
  • Fangxin Wang,
  • Wenyan Liang,
  • Zhenqing Wang and ,
  • Zhiwei Duan and
  • Bin Yang
  • + 1 author+ 0 author

3 June 2018

Bamboo fibers demonstrate enormous potential as the reinforcement phase in composite materials. In this study, in order to find suitable NaOH concentration for bamboo fiber treatment, bamboo fibers were treated with 2 wt.%, 6 wt.% and 10 wt.% NaOH so...

  • Article
  • Open Access
7 Citations
2,343 Views
31 Pages

27 October 2025

Carbon nanotubes (MWCNTs) were synthesized in situ on para-aramid fabrics (gCPO) via a low-temperature (450 °C) chemical vapor deposition (CVD) process to enhance interfacial pull-out, frictional, and fracture toughness characteristics. FESEM ana...

(This article belongs to the Special Issue Fabrication and Applications of Polymer Nanocomposite Materials)
  • Article
  • Open Access
5 Citations
2,919 Views
12 Pages

The Influence of Sagittal Pin Angulation on the Stiffness and Pull-Out Strength of a Monolateral Fixator Construct

  • Axel Klemeit,
  • Anna Weber,
  • Christoph Bourauel,
  • Kristian Welle and ,
  • Christof Burger,
  • Frank A. Schildberg and
  • Christoph Deborre
  • + 2 authors+ 0 author

Monolateral pin-to-bar-clamp fixators are commonly used to stabilize acute extremity injuries. Certain rules regarding frame geometry have been established that affect construct stability. The influence of sagittal pin angulation on construct stiffne...

(This article belongs to the Special Issue Biomechanics, Health, Disease and Rehabilitation)
  • Article
  • Open Access
13 Citations
3,832 Views
14 Pages

26 January 2022

The composite material textile reinforced concrete (TRC) requires a high bond performance between the fiber strand and the concrete matrix. While the influence of the textile on bond behavior is well known, in this publication the influence of the co...

(This article belongs to the Special Issue Structural Reinforced Polymer Composites)
  • Article
  • Open Access
1 Citations
2,314 Views
15 Pages

25 May 2023

To investigate the mechanical properties of high-strength stainless steel wire mesh (HSSSWM) in Engineering Cementitious Composites (ECCs) and determine a reasonable lap length, a total of 39 specimens in 13 sets were designed and fabricated by consi...

(This article belongs to the Special Issue Numerical Modeling and Mechanical Properties of Fiber-Reinforced Cementitious Composites)
  • Article
  • Open Access
12 Citations
3,528 Views
10 Pages

Characterization of MAO + Cu Composite Coatings on Aluminum Alloy

  • Shang-Kun Wu,
  • Wei Yang,
  • Wei Gao,
  • Yu-Hong Yao and ,
  • Yong Zhang and
  • Jian Chen
  • + 1 author+ 0 author

28 September 2021

Novel composite coatings were fabricated on 6061 aluminum alloy substrates by two steps combining micro-arc oxidation (MAO) plus electroless copper plating (Cu). Different MAO + Cu composite coatings were compared. Cu continuously and evenly covered...

(This article belongs to the Special Issue State-of-the-Art on Coatings Research in Asia)
  • Article
  • Open Access
4 Citations
6,841 Views
18 Pages

15 September 2021

Composite hydraulic cylinders are used to reduce the weight of construction equipment such as aerial work platforms or excavators. The weight is compensated by manufacturing hydraulic cylinders from Carbon Fiber Reinsforced Plastic (CFRP), but this i...

(This article belongs to the Topic Metallurgical and Materials Engineering)
  • Article
  • Open Access
51 Citations
10,730 Views
13 Pages

Finite Element Modeling of the Fiber-Matrix Interface in Polymer Composites

  • Daljeet K. Singh,
  • Amol Vaidya,
  • Vinoy Thomas,
  • Merlin Theodore and ,
  • Surbhi Kore and
  • Uday Vaidya
  • + 1 author+ 0 author

Polymer composites are used in numerous industries due to their high specific strength and high specific stiffness. Composites have markedly different properties than both the reinforcement and the matrix. Of the several factors that govern the final...

(This article belongs to the Special Issue Characterization and Modelling of Composites)
  • Article
  • Open Access
18 Citations
5,991 Views
9 Pages

ZrB2-CNTs Nanocomposites Fabricated by Spark Plasma Sintering

  • Hua Jin,
  • Songhe Meng,
  • Weihua Xie,
  • Chenghai Xu and
  • Jiahong Niu

29 November 2016

ZrB2-based nanocomposites with and without carbon nanotubes (CNTs) as reinforcement were prepared at 1600 °C by spark plasma sintering. The effects of CNTs on the microstructure and mechanical properties of nano-ZrB2 matrix composites were studied. T...

(This article belongs to the Special Issue The Failure Micromechanics and Toughening Mechanisms of Materials)
  • Review
  • Open Access
15 Citations
3,737 Views
18 Pages

Screw Osteointegration—Increasing Biomechanical Resistance to Pull-Out Effect

  • Bogdan Costăchescu,
  • Adelina-Gabriela Niculescu,
  • Alexandru Mihai Grumezescu and
  • Daniel Mihai Teleanu

11 August 2023

Spinal disorders cover a broad spectrum of pathologies and are among the most prevalent medical conditions. The management of these health issues was noted to be increasingly based on surgical interventions. Spinal fixation devices are often employed...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
4 Citations
1,340 Views
17 Pages

Bonding Properties of Embedded Fiber Reinforced Polymer Strip-Engineered Cementitious Composite Joints

  • Weiwen Li,
  • Wujun Fang,
  • Yao Lu,
  • Wanye Li and ,
  • Jingming Yang,
  • Hao Wang,
  • Peng Wang,
  • Yaocheng Wang and
  • Hongzhi Cui
  • + 4 authors+ 0 author

12 April 2025

The combination of fiber reinforced polymer (FRP) and engineered cementitious composite (ECC) has emerged as a promising method for strengthening reinforced concrete (RC) structures. By embedding FRP within an ECC to form a composite reinforcement la...

(This article belongs to the Section Polymer Fibers)
  • Feature Paper
  • Article
  • Open Access
11 Citations
2,657 Views
20 Pages

27 September 2022

In recycled asphalt mixtures, the RAP binder often becomes stiff and brittle due to aging, making it difficult to achieve a complete integration with the added virgin binder, which could provide a negative impact on the long-term performance of the r...

(This article belongs to the Special Issue Science and Technology of Pavement Coatings Materials)
  • Article
  • Open Access
24 Citations
4,373 Views
15 Pages

Carbon Fiber Reinforced Polymer Composites Doped with Graphene Oxide in Light of Spectroscopic Studies

  • Paulina Florek,
  • Magdalena Król,
  • Piotr Jeleń and
  • Włodzimierz Mozgawa

7 April 2021

Carbon fiber reinforced polymer composites are a dynamically developing group of lightweight composites for applications in the automotive, wind energy, aerospace, and sports sectors. Interfacial connection is the weakest place in these materials. In...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
6 Citations
3,314 Views
25 Pages

16 February 2023

The group studs arrangement is applied to prefabricated composite beams to significantly improve construction speed. However, contact vibration exists in the unconstrained interface area of the high-speed railway composite beam during the operation p...

(This article belongs to the Special Issue Steel-Concrete Composite Structures: Design and Construction)
  • Article
  • Open Access
11 Citations
6,557 Views
9 Pages

Bulk metallic glass (BMG) and BMG-graphite composites were fabricated using spark plasma sintering at the sintering temperature of 575 °C and holding time of 15 min. The sintered composites exhibited partial crystallization and the presence of distri...

(This article belongs to the Section Innovations in Materials Science and Materials Processing)
  • Article
  • Open Access
10 Citations
2,579 Views
18 Pages

9 August 2023

In order to investigate the effect of fiber end on the bonding mechanical properties between shape memory alloy (SMA) fibers and Engineered Cementitious Composites (ECC), this study designed and fabricated five groups of specimens with variations in...

(This article belongs to the Special Issue Novel Cementitious Materials for Resilient and Sustainable Buildings and Infrastructure)
  • Article
  • Open Access
30 Citations
7,501 Views
14 Pages

Flexural Behavior of Carbon Textile-Reinforced Geopolymer Composite Thin Plate

  • Hiep Le Chi,
  • Petr Louda,
  • Aravin Prince Periyasamy,
  • Totka Bakalova and
  • Vladimir Kovacic

8 November 2018

Textile-reinforced Portland cement-based concrete has been researched and developed over the last few decades. It was widely used in a different range of applications, such as repair and/or strengthening of structural elements, thin walls, lightweigh...

  • Article
  • Open Access
8 Citations
2,752 Views
17 Pages

Study on the Performance of Active Embedded Steel Wire Knot Form in Silicone Graphene Composite Thermal Insulation Structure Integrated System

  • Xiaoxia Zhao,
  • Dajiang Geng,
  • Zhiqiang Cheng,
  • Zhicheng Bai and ,
  • Mingjian Long,
  • Yang Chen,
  • Qingqing Lu and
  • Wei Ying
  • + 3 authors+ 0 author

Based on the advantages of the silicone graphene composite thermal insulation board, it was used to replace traditional plywood in the external wall formwork system, and the active embedded steel wire knot form in silicone graphene composite thermal...

(This article belongs to the Special Issue Latest Advances of Green Concrete Technology in Civil Engineering)
  • Article
  • Open Access
9 Citations
3,776 Views
17 Pages

Tailored Interfaces in Fiber-Reinforced Elastomers: A Surface Treatment Study on Optimized Load Coupling via the Modified Fiber Bundle Debond Technique

  • Julia Beter,
  • Boris Maroh,
  • Bernd Schrittesser,
  • Inge Mühlbacher and ,
  • Thomas Griesser,
  • Sandra Schlögl,
  • Peter Filipp Fuchs and
  • Gerald Pinter
  • + 3 authors+ 0 author

24 December 2020

The interface between the reinforcement and surrounding matrix in a fibrous composite is decisive and critical for maintaining component performance, durability, and mechanical structure properties for load coupling assessment, especially for highly...

(This article belongs to the Special Issue Advanced Rubber Composite)
  • Article
  • Open Access
2 Citations
3,797 Views
13 Pages

16 December 2022

Carbon nanotubes (CNTs) are widely used as reinforcements in cement-based composites. The improvement in the mechanical properties of the resulting materials depends on the characteristics of the interface formed between CNTs and the cement matrix. T...

(This article belongs to the Collection Nanocarbon-Based Composites and Their Thermal, Electrical, and Mechanical Properties)
  • Article
  • Open Access
6 Citations
2,854 Views
10 Pages

24 March 2022

A comprehensive study on the mechanical properties of a pure carbon nanotube (PCNT)/nitrile butadiene rubber (NBR) composite and an amide-functionalized carbon nanotube (CONH2–CNT)/nitrile butadiene rubber (NBR) composite was carried out using...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
35 Citations
5,244 Views
10 Pages

6 February 2018

In this article, hybrid composite laminates with shape memory alloy (SMA) and glass fiber (GF) as the reinforced phase, and epoxy resin as the host material, were manufactured by vacuum-assisted resin injection (VARI) processing. The SMA wires were e...

  • Article
  • Open Access
7 Citations
2,078 Views
14 Pages

16 December 2022

In order to study the bond performance between desert sands engineered cementitious composites (DS-ECC) and corrosion steel bars, seven groups of specimens were designed and manufactured. Through the center pull-out test, the effects of different typ...

  • Article
  • Open Access
3 Citations
12,875 Views
16 Pages

25 February 2025

The aim of this study was to analyze the effects of a 7-week combined strength and power training program on body composition, aerobic capacity, strength, sprint, and agility in elite youth soccer players. Twenty-one players, divided into age groups...

(This article belongs to the Special Issue Technologies in Sports and Physical Activity)

of 6