- Article
Circular–circular regression models are widely used to investigate relationships between angular variables in various applied fields, including biostatistics. The classical von Mises (vM) circular–circular regression model, however, is kn...
Circular–circular regression models are widely used to investigate relationships between angular variables in various applied fields, including biostatistics. The classical von Mises (vM) circular–circular regression model, however, is kn...
Circular data arise in a wide range of scientific fields, including meteorology, medicine, biology, and neuroscience, yet existing regression methods for such data are largely restricted to parametric generalized linear models or tree-based methods t...
Circular data are extremely important in many different contexts of natural and social science, from forestry to sociology, among many others. Since the usual inference procedures based on the maximum likelihood principle are known to be extremely no...
Leveraging circular regression, this study analyzed phenological data from China spanning the period 2003 to 2015, meticulously examining the effects of temperature, precipitation, and CO2 concentrations on the phenological patterns of woody and herb...
Lock-in amplification (LIA) is an effective approach for recovery of weak signal buried in noise. Determination of the input signal amplitude in a classical dual-phase LIA is based on incoherent detection which leads to a biased estimation at low sig...
The prediction and control of the mechanical behaviours of fibre-reinforced polymer (FRP)-confined circular concrete columns subjected to axial loading are directly related to the safety of the structures. One challenge in building a mechanical model...
Non-parametric regression with a circular response variable and a unidimensional linear regressor is a topic which was discussed in the literature. In this work, we extend the results to the case of multivariate linear explanatory variables. Nonparam...
This article is dedicated to the design of a linear-circular regression technique and to its application to ground-based GNSS-Reflectometry (GNSS-R) altimetry. The altimetric estimation is based on the observation of the phase delay between a GNSS si...
To address the problems that existing UAV RF signal azimuth estimation methods rely on idealized simulation data and lack accuracy and robustness in complex environments, a high-precision azimuth estimation method based on an improved ResNet, namely...
The transition towards a circular economy is widely expected to reduce dependence on primary resources, yet higher levels of circularity do not necessarily translate into proportional reductions in absolute material use. This study investigates the r...
In this paper, the authors identified key elements important for circularity. The primary goal of circularity is to eliminate waste and prove the constant use of resources. In the paper, we classified studies according to circular approaches and stat...
The authors have revised the circularity of materials, which is essential to stimulate circular activity processes. The theoretical part starts with the revision of material circularity under linear and circular models, and answers to the question of...
Food-related circularity reduces food waste, enhances food security, and promotes sustainable food management. This study assessed the extent of food-related circularity adoption among adult consumers in the Eastern Province of Saudi Arabia and ident...
In order to accomplish economic, social, and environmental objectives, farm diversification is a significant feature in India’s agricultural systems and rural development. It is crucial to examine factors impacting farm productivity, such as so...
The European Union’s commitment to achieving climate neutrality by 2050 requires sustainable economic models that address both environmental degradation and energy security. While renewable energy technologies are recognized solutions to climat...
The Circular Economy represents an essential strategy for a more sustainable future, both for the environment and for the economy and society. The main purpose of this article is to conduct a holistic analysis that highlights Romania’s perspect...
In this study, an optimization method using various multi-output regression models as model proxies within the NSGA-II framework was applied to determine the geometric parameters (P, W, D) of L-shaped twisted tape inserts for achieving the optimal ov...
Small and medium-sized enterprises account for 99% of EU firms, making their engagement with circular economy (CE) practices indispensable to any economy-wide transition, yet the firm-level business case for voluntary adoption remains empirically con...
The transition to a circular economy (CE) presents significant financial challenges and opportunities for public waste management and fiscal governance in Slovakia. This study examines the financial implications of the circular economy transition for...
Circular economy is gaining attention in business and society to advance sustainability. This paradigm is particularly relevant for energy-consuming products such as washing machines, where alternatives to linear economy such as pay-per-use and refur...
Urbanization and climate change are requiring cities to find novel pathways to a sustainable future, and therefore the urban context may accelerate the conversion to a circular economy. In this sense, climate change is a considerable threat to the en...
This study investigates the effects of aging and recycling on the optical properties of paperboard, which is key to advancing circular economy practices in packaging. Methods included deinking flotation of cardboard made from sea algae and eco-conven...
This study presents a new approach to determining the preload force of bolted joints. The concept involves measuring the torsional angle without contact. For this purpose, we present a circular magnetic sensor array integrated into the torque wrench....
The aim of this research is to determine the significance of the impact of selected environmental protection indicators, with a focus on waste management, on the sustainability of economic growth in EU countries (21 member states) over the period 201...
Steel braces in concentrically braced frames exhibit nonlinear axial force–displacement responses under repeated tension and compression. This study develops a workflow for predicting the hysteretic response of pin-ended circular steel tube bra...
Across the European Union, deposit–refund systems (DRSs) are increasingly seen as a crucial response to mounting waste management challenges, including low recycling rates and rising plastic pollution. By attaching a refundable deposit to bever...
The constant rise in the consumption of resources puts the environment under pressure. Most resources are non-renewable in nature, which is why they must be utilized with great care. For this reason, the European Union devotes increasingly more atten...
This study aimed to identify patterns of sustainability engagement based on circular economy (CE) strategy implementation, CE-oriented collaborative relationships, and environmental, social, and governance (ESG) performance, as well as to investigate...
Herein, a processing method is proposed for accurate microdisplacement measurements from a 2D Fabry–Perot (F-P) fringe pattern. The core of the processing algorithm uses the F-P interference imaging concentric ring pattern to accurately calculate the...
As one of the world’s fastest-growing economies, Vietnam is tackling environmental pollution, particularly plastic waste. This study contributes to the literature on environmental culture and practical solutions by better understanding households’ be...
Bananas are one of the most important crops worldwide. However, a large amount of residual lignocellulosic biomass is generated during its production and is currently undervalued. These residues have the potential to be used as feedstock in bio-based...
23 February 2023
Water pollution caused by microplastics represents an important challenge for the environment and people’s health. The weak international regulations and standards in this domain support increased water pollution with microplastics. The literat...
This article deals with the problem of harvesting combed straw by mixing it with the soil and the process of combed straw decomposition in particular. The idea and purpose of the research are also analysed in terms of circular economy, which represen...
Small and medium-sized enterprises (SMEs) represent the majority of EU businesses and a disproportionate share of its environmental impact, yet longitudinal evidence on their resource efficiency behaviour remains scarce. This study examines whether S...
This case study research provides unique insight into mixed construction and demolition waste generated through the construction of a secondary school project and, moreover, provides actual site data that is rare within published literature. A determ...
Evaluating the reliability of deep soft rock tunnels is a very important issue to be solved. In this study, we propose a Monte Carlo simulation reliability analysis method (MCS–RAM) integrating the adaptive momentum stochastic optimization algo...
In work, data from carbonization of the eight main municipal solid waste components (carton, fabric, kitchen waste, paper, plastic, rubber, paper/aluminum/polyethylene (PAP/AL/PE) composite packaging pack, wood) carbonized at 300–500 °C for 20–60 min...
The scope of this paper is to analyze European consumers’ attitudes and behavior towards the environment. The paper has the following main objectives: measuring homogeneity and heterogeneity within and between European countries with reference...
In this work, a nonparametric method is proposed to jointly test the significance of the regression coefficient estimates in a logistic regression model and identify which explanatory variables are effective in predicting the binary response. The mot...
Utilizing panel quantile regression on an unbalanced dataset for 30 European countries from 2008 to 2018, this article seeks to investigate how the age of cabinet members influences e-waste recycling rates in European countries, alongside other relev...
The component method is a powerful tool for designing and modelling steel beam-to-column connections. Its widespread use is ensured by several formulations currently included in Eurocode 3 part 1.8 for welded and bolted joints. However, the recent us...
The global plastic production total has risen to more than 400 million tons per year; this number is mainly driven by industrial appliances. In the EU, where the annual production is about 30 million tons, only 32% of plastic waste is recycled. There...
Due to complex traffic conditions, freeway curves are associated with higher crash rates, particularly for trucks, which poses significant safety risks. Predicting truck crash rates on curves is essential for enhancing freeway safety. However, geomet...
This study examines the determinants of capital structure in small agricultural enterprises in Serbia, with a particular emphasis on the external context shaped by circular economy (CE) indicators. Using a balanced panel of 254 firms between 2014 and...
The demand for sustainable construction has intensified the search for structurally viable recycled concrete aggregate (RCA) applications, historically limited by high water absorption, low density, and a weak dual interfacial transition zone (ITZ)....
Mechanisms for sectoral change in the economy are being used to move towards a circular economy. Trade in recycled raw materials could contribute to circular economy development and is treated as the main circular indicator used to monitor progress t...
Bamboo-based fiber composite panel is a new type of composite material with excellent performance. When processing bamboo-based fiber composite panels, the dynamic stability of the circular saw blade affects the surface quality of the product and the...
The circular economy has become one of the main strategic issues on a global scale in the striving towards achieving sustainable economic systems. The traditional model of production, consumption and disposal is being transformed into a recycling and...
The research presented in this article aimed to analyze the impact of circular economy initiatives on the European Union environmental goods and services sector. Data from the Eurostat databases were used to conduct the research. Validation of the fi...
(1) If policy-makers and businesses are to encourage consumers to participate in circular consumption systems, knowledge is needed about what motivates consumers to choose different disposal options. This paper aims to shed light on what motivates co...
of 9