268 Results Found

Oxyfluoride glass-ceramics (OxGCs) with the molar composition 80SiO2-20(1.5Eu3+: NaGdF4) were prepared with sol-gel following the “pre-crystallised nanoparticles route” with promising optical results. The preparation of 1.5 mol % Eu3+-dop...

Solid solutions of ceramic pigments of red shade have been synthesized based on YAlO3 perovskite structure doped with chromium by means of conventional synthesis; that is, the “ceramic route”. To optimize this synthesis, an emphasis has b...

Three processes for the production of ceramics close to stoichiometric MgAl2O4 are benchmarked against each other. The traditional ceramic route is based on mostly crystalline starting powder, which is converted into ceramic via shaping and heat trea...

Research and development of lead-free piezoelectric materials are still the hottest topics in the field of piezoelectricity. One of the most promising lead-free family of compounds to replace lead zirconate–titanate for actuators is that of Bi0.50Na0...

Porous ceramics can be realized by different methods and are used for various applications such as cross-flow membranes or wall-flow filters, porous burners, solar receivers, structural design elements, or catalytic supports. Within this paper, three...

Ceramic-based nanofiber materials for high-performance thermal management have drawn increasing attention owing to their high-temperature resistance, efficient thermal insulation, superior mechanical flexibility, as well as excellent physical–c...

Through an activation reaction sintering method, porous (Mo2/3Y1/3)2AlC ceramics were prepared by Mo, Y, Al, and graphite powders as raw materials. The phase composition, microstructure, element distribution, and pore structure characteristics were c...

Chemically and thermally stable ceramics are required for many applications. Many characteristics (electrochemical stability, high thermomechanical properties, etc.) directly or indirectly imply the use of refractory materials. Many devices require t...

Mullite, 3Al2O3·2SiO2, is a material with excellent thermal and mechanical properties. Two types of waste sand, rich in impurities, were employed as precursors for mullite ceramic synthesis. Two different synthesis routes were used: (i) solid-...

Aliovalent substitutions in Ca3Co4O9 often result in complex effects on the electrical properties and the solubility, and impact of the substituting cation also depends largely on the preparation and processing method. It is also well-known that the...

In this work, were synthesized (Pb0.91La0.09)(Zr0.65Ti0.35)0.9775O3 ceramic materials with different concentrations of praseodymium (0, 0.1, 0.3, 0.5, 1 wt.%) via gel-combustion route and sintered by the hot uniaxial pressing method. Measurements wer...

Three different inorganic scaffolds were obtained starting from the oxide system SiO2‒P2O5‒CaO‒MgO, to which Ce4+/Sm3+/Sr2+ cations were added in order to propose novel materials with potential application in the field of hard tissue engineering. Kno...

Perovskite-type Sr(Ti,V)O3-δ ceramics are promising anode materials for natural gas- and biogas-fueled solid oxide fuel cells, but the instability of these phases under oxidizing conditions complicates their practical application. The present w...

Giant dielectric oxides are attractive for next-generation capacitors and related applications, but their practical use is limited by high loss tangent (tanδ), strong temperature dependence of dielectric permittivity (ε′), and the...

A wider utilization of ultra high temperature ceramics (UHTC) materials strongly depends on the availability of efficient techniques for their fabrication as dense bodies. Based on recent results reported in the literature, it is possible to state th...

This work presents a comparative study on the structural, microstructural, and functional properties of a novel lead-free solid solution based on (1−x)(0.95(Bi0.5Na0.5)TiO3–0.05BaTiO3)–x(0.5Ba0.7Ca0.3TiO3–0.5BaTi0.8Zr0.2O3), a...

This article reviews the progress in developing ZnO-V2O5-based metal oxide varistors (MOVs) using powder metallurgy (PM) techniques. The aim is to create new, advanced ceramic materials for MOVs with comparable or superior functional properties to Zn...

It is well-known that the electrical properties of the Ca3Co4O9 thermoelectric (TE) compound are strongly influenced by the valence of the substituting cation, while its solubility and “functional” impact depend largely on the preparation...

Iron carbide (Fe3C) is a ceramic magnetic material with high potential for applications in different fields, including catalysis, medicine imaging, coatings, and sensors. Despite its interesting properties, it is still somehow largely unexplored, pro...

ZrO2 (3Y-TZP) matrix composites with 30 vol % Zr metallic particles were obtained by spark plasma sintering (SPS) using a colloidal processing method. The microstructure and mechanical properties of this novel ceramic–metal composite have been...

High-k Ba4Sm28/3Ti18O54 ceramics with improved microwave dielectric characteristics were successfully fabricated using the one-step reaction sintering (RS) route. The sintering characteristics, microstructure, crystal structure, infrared reflection s...

ZnO-based ceramic varistors have shown excellent electrical and dielectric properties due to their characteristics microstructures represented by the arrangement of their grains and grain boundaries that allow the absorption and flow of energy when s...

The distribution of second phase particles in the microstructure of composite ceramics affects the mechanical properties, and the intragranular structures often result in better properties compared to the intergranular structures. However, it is diff...

The structural and chemical properties of zirconolite (ideally CaZrTi2O7) as a host phase for separated REE–actinide-rich wastes are considered. Detailed analysis of both natural and synthetic zirconolite-structured phases confirms that a selec...

A novel process for producing thick protonic ceramics for use in hydrogen separation membrane reactors is demonstrated. Polymer clay bodies based on polyvinyl acetate (PVA) and mineral oil were formulated, and they permitted parts with complex archit...

Promoted by carbon neutrality and solid iste policies, iron- and steelmaking iste slag (ISWS)-based glass-ceramics have drawn attention because of their contribution to achieving the net-zero carbon emissions goal for the iron- and steelmaking indust...

Achieving carbon neutrality is important to solve environmental problems and thus requires decarbonizing manufacturing processes to reduce greenhouse gas emissions. The firing of ceramics, including calcination and sintering, is a typical fossil fuel...

Due to the importance of optimizing the manufacture of ceramic pigments, motivated by the increase in prices of both raw materials and energy, and the need to control manufacturing parameters to obtain optimal conditions for the preparation of cerami...

Metal–ceramic composites are obtained via ex-situ or in-situ routes. The in-situ route implies the synthesis of reinforcement in the presence of a matrix and is often regarded as providing more flexibility to the microstructure design of composites t...

The aim of this study was to investigate properties of ceramic phosphors fabricated using nano Lu3Al5O12:Ce3+ phosphors produced with a sol-gel-combustion method. These nano Lu3Al5O12:Ce3+ phosphors had a size of about 200 nm, leading to high density...

Ceramics suffer the curse of extreme brittleness and demand new design philosophies and novel concepts of manufacturing to overcome such intrinsic drawbacks, in order to take advantage of most of their excellent properties. This has been one of the f...

The precursor-derived ceramic route is recognized as an advanced and efficient technique for fabricating ceramic matrix composites, particularly suitable for the development and microstructural tailoring of continuous fiber-reinforced ceramic matrix...

In this work, (1-x)Li2TiO3-xLi4NbO4F ceramics were prepared by the conventional solid-state ceramic route. With the increase of Li4NbO4F content, the phase structure transformed from ordered monoclinic to disordered cubic. By increasing Li3NbO4F cont...

Support is a necessary foundation for ceramic membranes to achieve high performance. Finding the optimum balance between high performance and low cost is still a significant challenge in the fabrication of ceramic supports. In this study, low-cost fl...

This study focuses on two different techniques for preparation of nickel manganite (NiMn2O4) system. One approach is conventional ceramic method, and the second is based on replacing the ceramic route with green synthesis mediated by egg white. The g...

For the first time to the best of our knowledge, cobalt-chromium spinels CoCr2−xGaxO4 with different amounts of gallium (x = 0–2 with a step of 0.5) were synthesized via the aqueous sol–gel route as ceramic pigments. The phase compo...

In present work, the combination of spark plasma sintering (SPS) and selective laser melting (SLM) techniques was introduced to produce composite materials where silver-doped titania (TiO2) ceramics were reinforced with ordered lattice structures of...

Polysilazanes functionalized with alkoxy groups were designed and synthesized as single source precursors for fabrication of micro and mesoporous amorphous silica-based materials. The pyrolytic behaviors during the polymer to ceramic conversion were...

Lead-free piezoelectric ceramics with nominal composition at morphotropic phase boundary Ba0.85Ca0.15Ti0.9Zr0.1O3 (BCTZ) prepared by different processing routes and sintered either by conventional solid-state reaction or by spark plasma sintering (SP...

Additive manufacturing methods can constitute a valuable alternative to conventional production techniques for components used in the heavy industry, particularly in foundry applications. This innovative manufacturing approach enables an expanded pro...

Among a series of 3D printing techniques, stereolithography provides a new route to produce ceramic architectures with the advantages of high-precision and short cycle time. However, up to now the stereolithography of non-oxide ceramics still face co...

Sn-doped MnNiFeO4 ceramic with negative temperature coefficient (NTC) was prepared through the low-temperature solid-phase reaction route (LTSPR), aiming at improving the sintering behavior and modulating the electrical properties. The experimental r...

(Pb0.97La0.02)(Zr0.95Ti0.05)O3 (PLZT2/95/5) ceramics were successfully prepared via a solid-state reaction route. The dielectric properties were investigated in the temperature region of 26–650 °C. The dielectric diffuse anomaly in the dielectric rel...

The optical band-gap energy (Eg) is an important feature of semiconductors which determines their applications in optoelectronics. Therefore, it is necessary to investigate the electronic states of ceramic ZnO and the effect of doped impurities under...

Electrical discharge machinable ceramics provide an alternative machining route independent on the material hardness which enables manufacturing of customized ceramic components. In this study a composite material based on an alumina/zirconia matrix...

Gadolinium-containing calcium phosphates are promising contrast agents for various bioimaging modalities. Gadolinium-substituted tricalcium phosphate (TCP) powders with 0.51 wt% of gadolinium (0.01Gd-TCP) and 5.06 wt% of (0.1Gd-TCP) were synthesized...

This study presents a fabrication route for an electrically conductive ZrO2–TiN ceramic nanocomposite with a nanoscale TiN phase occupying ≤30 vol% to improve the mechanical reinforcement of the zirconia matrix, and at the same time provide...

Ceramizable silicone rubber (CSR) composed of silicone rubber matrix and inorganic fillers can be transformed into a dense flame-retardant ceramic upon encountering high temperatures or flames. Conventionally, CSR can be sintered into a dense ceramic...

Porous ceramic membranes for aqueous microfiltration and ultrafiltration processes suffer from the high-costs of material and processing. The latter is mainly due to the high-temperature sintering step. In this work, cement-based membrane supports fr...

Alumina ceramics were obtained from three different alumina sources, A1–A3, with various rare-earth dopants (La2O3–La, Nd2O3–Nd, and Y2O3–Y), concentration levels (500 and 1000 ppm) and synthesizing routes (1500 °C, 1815 &...