Titanium dioxide (TiO2) is manufactured worldwide as crystalline and amorphous forms for multiple applications, including tissue engineering, but our study proposes analyzing the impact of crystalline phases of TiO2 on Mesenchymal Stem Cells (MSCs)....
To evaluate the effects of different TiO2 crystalline phases on the catalytic oxidation performance of benzene on Pt-loaded TiO2 catalysts, physicochemical examinations were conducted using several spectroscopic and analytical techniques. Obvious eff...
Titanium biomaterials’ response has been recognized to be affected by particles size, crystal structure, and surface properties. Chemical and structural properties of these nanoparticle materials are important, but their size is the key aspect....
The thermally-induced crystallization of anodically grown TiO2 amorphous nanotubes has been studied so far under ambient pressure conditions by techniques such as differential scanning calorimetry and in situ X-ray diffraction, then looking at the ov...
In this work, we investigated the role of the crystalline phases of titanium dioxide in the solar photocatalytic H2 production by the reforming of glycerol, focusing the attention on the influence of photodeposited gold, as a metal co-catalyst, on Ti...
Crystalline phase engineering is a prominent strategy for synergistically optimizing the surface–body phases of a catalyst. In this work, TiO2 nanosheets assembled into nanotubes (TNSTs) with two phases, anatase and rutile, were firstly synthes...
The crystal phases and surface states of TiO2 can intrinsically determine its performance in the applications of photocatalysis. Here, we prepared TiO2 nanofibers with different crystal phase contents by electrospinning followed via calcination at di...
Polyvinylidene difluoride (PVDF) and its copolymers are promising electroactive polymers showing outstanding ferroelectric, piezoelectric, and pyroelectric properties in comparison with other organic materials. They have shown promise for application...
Mixed phase TiO2 nanoparticles with element doping by Sm and C were prepared via a facile sol-gel procedure. The UV-Vis light-diffuse reflectance spectroscopy analysis showed that the absorption region of co-doped TiO2 was shifted to the visible-ligh...
For dielectric energy storage materials, high polarization and high breakdown strengths are a long-standing challenge. A modulating crystalline/amorphous phase structure strategy is proposed by Mn-doping and annealing temperature to enhance the energ...
Hierarchical aggregates of anatase TiO2 nanoribbons/nanosheets (TiO2-NR) and anatase TiO2 nanoparticles (TiO2-NP) were produced through a one-step solvothermal reaction using acetic acid or ethanol and titanium isopropoxide as solvothermal reaction s...
In this work, a TiO2/In2S3 heterojunction film was successfully synthesized using a one-step hydrothermal method and applied in the photocathodic protection (PCP) of 304SS. The octahedral In2S3 and In2S3@TiO2 nanoparticles combined and coexisted with...
To evaluate the crystallization behavior of Ti-bearing blast furnace slag-based glass ceramics, SiO2-Al2O3-CaO-MgO-TiO2 systems with various TiO2 were investigated. The crystallization process and mechanical properties were analyzed. The results show...
One of the most important issues in photocatalysis research has been the development of TiO2-based photocatalysts that work efficiently under visible light conditions. Here, we report the monodispersed, spherical TiO2 particles with disordered rutile...
TiO2 and core–shell SiO2@TiO2 nanoparticles were synthesized by sol-gel process at different calcination temperatures. Mesoporous hollow TiO2 composites were prepared by etching SiO2 from SiO2@TiO2 nanoparticles with alkali solution. X-ray diff...
This work reviews an eco-friendly process for producing TiO2 via colloidal aqueous sol–gel synthesis, resulting in crystalline materials without a calcination step. Three types of colloidal aqueous TiO2 are reviewed: the as-synthesized type obtained...
TiO2–Bi2O3 composite rods were synthesized by combining hydrothermal growth of rutile TiO2 rod templates and sputtering deposition of Bi2O3 thin films. The TiO2–Bi2O3 composite rods with β-Bi2O3 phase and α/β-Bi2O3 dual-ph...
The chemical, structural, morphological, and optical properties of Al-doped TiO2 thin films, called TiO2/Al2O3 nanolaminates, grown by plasma-enhanced atomic layer deposition (PEALD) on p-type Si <100> and commercial SLG glass were discussed. H...
Titanium dioxide (TiO2) is a versatile material that exhibits a high refractive index, strong light-scattering capability, effective UV-absorption, wide band gap semiconductor behavior (3.0–3.2 eV), and excellent chemical stability. Owing to th...
Nanoparticles of TiO2 are suitable for many catalytic and photocatalytic applications due to their extraordinary properties such as superhydrophobicity, semiconductivity, electron-rich, and environmental compatibility. The main crystalline phases of...
Titanium dioxide nanoparticles (TiO2 NPs) have been widely used in food, cosmetics, and biomedical research. However, human safety following exposure to TiO2 NPs remains to be fully understood. The aim of this study was to evaluate the in vitro safet...
Multi-heterojunctions are more promising than single heterojunctions in photocatalysis due to the availability of more interfaces between each component. However, photocatalytic activity is highly dependent on the contact mode of individual component...
Post-synthesis heat treatment provides a route for tuning the structural and optical response of TiO2 without necessarily altering its particle architecture. In this study, TiO2 nanostructures prepared by the sol–gel method were evaluated befor...
Web-like architectures of ZnO and TiO2 nanotubes were fabricated based on a three-step process of templating polymer nanofibers produced by electrospinning (step 1). The electrospun polymer nanofibers were covered by radio-frequency magnetron sputter...
Titanium oxide (TiO2) films and TiO2/SiNx stacks have potential in surface passivation, anti-reflection coatings and carrier-selective contact layers for crystalline Si solar cells. A Si wafer, deposited with 8-nm-thick TiO2 film by atomic layer depo...
Mesoporous TiO2 is attracting increasing interest due to properties suiting a broad range of photocatalytic applications. Here we report the facile synthesis of mesoporous crystalline TiO2-B nanobelts possessing a surface area as high as 80.9 m2 g&mi...
Today, one of the most promising materials for a wide range of practical applications is lithium-containing ceramics based on Li2TiO3. At the same time, despite the high potential of their practical application, a number of questions remains related...
In this paper, TiO2 prepared with an aqueous sol-gel synthesis by peptization process is doped with nitrogen precursor to extend its activity towards the visible region. Three N-precursors are used: urea, ethylenediamine and triethylamine. Different...
Crystalline TiO2 films were prepared on unheated glass substrates by radio frequency (RF) reactive magnetron sputtering at normal angle of incidence (a = 0°) and at glancing angle (a = 87°). The effect of the glancing angle on the structure,...
Titanium dioxide (TiO2) nanotube and its hybrid nanotubes (with various metal oxides such as Ta2O5, Nb2O5, ZrO2, and SiO2) were fabricated by the sol-gel polymerization in the ethanol gels formed by simple l-lysine-based organogelator. The self-assem...
Titanium oxide films were deposited at room temperature and with no applied bias using a filtered cathodic vacuum arc (FCVA) system in a reactive oxygen environment. The dependence of film growth on two process parameters, the working pressure (Pw) a...
The electron transport layer (ETL) plays a crucial role in solar cell technology, particularly in perovskite solar cells (PSCs), where nanostructured TiO2 films have been investigated as superior ETLs compared to compact TiO2. In this study, we explo...
A dual soft-templating method was developed to produce highly crystalline and mesoporous TiO2-SiO2 nanocomposites. Pluronic F127 as the structure-directing agent and pure cellulose as the surface area modifier were used as the templating media. While...
Recycling opaque Polyethylene terephthalate (PET), which contains 1 to 10 wt % TiO2 submicron particles, has become of interest in the past few years. However, the bottle-to-fiber recyclability of opaque PET has not been assessed yet. In this work, o...
A Zn2TiO4 crystalline photovoltaic glass ink was prepared by fast firing at 700 °C for 5 min by the glass crystallisation method, which effectively improved the reflectivity and acid resistance of the photovoltaic glass ink coating. The phase, mo...
This paper studies the influence of B2O3 on the structure, properties and antibacterial abilities of sol-gel-derived TiO2/TeO2/B2O3 powders. Titanium(IV) butoxide, telluric(VI) acid and boric acid were used as precursors. Differences were observed in...
TiO2-supported catalysts have been widely used for a range of both liquid-phase and gas-phase hydrogenation reactions. However, little is known about the effect of their different crystalline surfaces on their activity during the hydrodeoxygenation p...
In this work, TiO2 nanoparticles were successfully synthesized with narrow size distribution via a wet ball milling sol-gel method. The effect of calcination temperature on photocatalytic activity was observed from particle size, crystallite size, an...
TiO2-MoO3 composite systems were successfully prepared using a template-assisted microwave method at molar ratios TiO2:MoO3 = 8:2, 5:5 and 2:8. The synthesized material systems were comprehensively characterized, in terms of their crystalline structu...
Degradation of organic pollutants, especially organic dyes and antibiotics, by semiconductor photocatalysts is an efficient strategy for wastewater treatment. TiO2 nanomaterials are considered to be promising photocatalysts due to their high chemical...
Pure TiO2 and 3% Y-doped TiO2 (3% Y-TiO2) were prepared by a one-step hydrothermal method. Reduced TiO2 (TiO2-H2) and 3% Y-TiO2 (3% Y-TiO2-H2) were obtained through the thermal conversion treatment of Ar-H2 atmosphere at 500 °C for 3 h. By system...
TiO2 exists naturally in three crystalline forms: Anatase, rutile, brookite, and TiO2 (B). These polymorphs exhibit different properties and consequently different photocatalytic performances. This paper aims to clarify the differences between titani...
In the present work, a TiO2/zeolite photocatalyst was synthesized by dispersing TiO2 nanoparticles obtained through the sol-gel method onto the surface of natural zeolite derived from ignimbrite residue. The zeolite was obtained from an ignimbrite ru...
N-doped titanium dioxide (N/TiO2) nanomaterials were successfully prepared using titanium butoxide and guanidinium chloride using the simple sol-gel method. The significance of the annealing gas environment (air, argon, or nitrogen) on their physicoc...
Ti-TiO2 bilayer thin films were successfully prepared onto a glass substrate using magnetron sputtering with different TiO2 bottom layer conditions. These represent a lack of (as-deposited) and full oxygen content (annealed). Single-layer Ti was addi...
TiO2 electrochemical biosensors represent an option for biomolecules recognition associated with diseases, food or environmental contaminants, drug interactions and related topics. The relevance of TiO2 biosensors is due to the high selectivity and s...
A high-performance photocatalytic ceramic membrane was developed by direct growth of a TiO2 structure on a macroporous alumina support using a hydrothermal method. The morphological nanostructure of TiO2 on the support was successfully controlled via...
Titanium dioxide (TiO2) is an important photocatalyst that is widely studied for environmental applications, especially for water treatment by degradation of pollutants. A range of methods have been developed to produce TiO2 in the form of nanopartic...
Modern industrial systems and biomass-fired furnaces require surface treatments that can withstand aggressive chemical, thermal, and corrosive environments. This study investigates the corrosion and thermal resistance of plasma-sprayed Al2O3-TiO2 coa...
In this thesis, wood loaded with a silica–titanium (Si-Ti) composite film was prepared using the sol–gel method in order to achieve improved wood with high hydrophobicity and photocatalytic activity under visible light. The factors affect...
of 8