High-performance thermoplastics like polyetheretherketone (PEEK), with their outstanding thermal stability, mechanical properties and chemical stability, have great potential for various structural applications. Combining with additive manufacturing...
Addition of bioactive materials such as calcium phosphates or Bioglass, and incorporation of porosity into polyetheretherketone (PEEK) has been identified as an effective approach to improve bone-implant interfaces and osseointegration of PEEK-based...
In this study, poly (ether ether ketone) (PEEK)/polytetrafluoroethylene (PTFE) composites reinforced with carbon fibers (CFs) and graphite (Gr) were fabricated by compressive molding technology. The friction and wear properties of the PEEK/PTFE compo...
Polyethylene is used as a traditional shielding material in the nuclear industry, but still suffers from low softening point, poor mechanical properties, and difficult machining. In this study, novel boron carbide polyether-ether-ketone (PEEK) compos...
This study introduces a low-friction composite based on PEEK to improve its friction and wear properties. The composite incorporates PTFE as a solid lubricant and utilizes PPTA as a reinforcing material within the PEEK matrix. These components were p...
In this study, bearing bushes made of polyetheretherketone (PEEK), 30 wt % carbon fibre reinforced PEEK, 30 wt % glass fibre reinforced PEEK, each 10 wt % of PTFE, graphite and carbon fibre modified PEEK were investigated on a purpose built pin joint...
The biocompatible polymer polyetheretherketone (PEEK) is a suitable candidate to be part of potential all-polymer total joint replacements, provided its use is associated with better osseointegration, mechanical performance, and wear resistance. Seek...
Polyetheretherketone (PEEK) is a high-performance thermoplastic polymer which has found increasing application in orthopaedics and has shown a lot of promise for ‘made-to-measure’ implants via additive manufacturing approaches. However, PEEK is bioin...
The incorporation of various types of fillers is critical to enhancing the starved oil lubrication performance of PEEK matrix composites. In this work, PEEK composites reinforced with h-BN and SCFs were fabricated via a hot-pressing method, and the f...
Carbon fiber/polyether ether ketone (CF/PEEK) is widely used in aerospace, transportation, and other high-end industries for its light weight, high strength, and recyclability. However, its inherently brittle–ductile two-phase structure present...
Poly(ether ether ketone)/carbon-fiber (PEEK/CF) composites possess excellent mechanical and thermal stability but exhibit inadequate friction and wear resistance for demanding tribological applications. In this study, femtosecond laser texturing was...
The manufacture of polyetheretherketone/hydroxyapatite (PEEK/HA) composites is seen as a viable approach to help enhance direct bone apposition in orthopaedic implants. A range of methods have been used to produce composites, including Selective Lase...
Due to the addition of short/continuous fibers with better mechanical properties, FDM 3D-printed short- and continuous-fiber-reinforced PEEK composites possess better performance than printed PEEK. However, the interlayer bonding performance becomes...
The effect of the graphene nanoplateletets (GNP), at concentration of 1, 5 and 10 wt %, in Poly ether ether ketone (PEEK) composite crystallization from melt and during cold crystallization were investigated by differential scanning calorimetry (DSC)...
Carbon nanomaterial particles were selectively distributed in an incompatible and high-melting-temperature polymer blend interface, or in a particular phase, to obtain conductive composites. The composite products revealed poor morphology stability a...
This study addresses the poor compatibility between resin and reinforcement and the weak interfacial bonding in poly(ether ether ketone) (PEEK)-based composites by preparing several macromolecular silane coupling agents. Three types of coupling agent...
With the rapid development of the aerospace, automobile, and ocean industries, there is an urgent need for the fabrication of high-performance polymer matrix composites with low friction and wear in wide temperature ranges. In this paper, polytetrafl...
Carbon Fiber Reinforced Thermoplastic Polymer (CFRTP) composites, particularly those utilizing Polyetheretherketone (PEEK) matrices, are becoming more demanding in the automotive and aerospace industries because of their outstanding strength, resilie...
The aim of this study was to optimize a set of technological parameters (travel speed, extruder temperature, and extrusion rate) for 3D printing with a PEEK-based composite reinforced with 30 wt.% glass fibers (GFs). For this purpose, both Taguchi an...
This study evaluated the retention force between milled polyetheretherketone (PEEK) posts with different surface treatments and resin composites for core build-up, and the effect of thermal cycling on the retention force. Four groups of PEEK posts we...
There are various types of charged particles in the space environment, which can cause different types of radiation damage to materials and devices, leading to on-orbit failures and even accidents for spacecraft. Developing lightweight and efficient...
Poly-ether-ether ketone (PEEK) is a great potential thermoplastic in industry and medical treatment and health. In this work, PEEK/graphene oxide (GO) and PEEK/MoS2 composites were prepared by a novel hot isostatic pressing method. The addition of GO...
The incorporation of bioactive ceramic into polyether ether ketone (PEEK) was expected to improve the bioinertia and hydrophobicity of pure PEEK, further facilitating osseointegration and bone ingrowth. However, the addition of bioceramic also change...
Three-dimensional printing or additive manufacturing (AM) has enabled innovative advancements in tissue engineering through scaffold development. The use of scaffolds, developed by using AM technology for tissue repair (like cartilage and bone), coul...
The future of manufacturing applications in three-dimensional (3D) printing depends on the improvement and the development of materials suitable for 3D printing technology. This study aims to develop an applicable and convenient protocol for light-cu...
PEEK coatings have been applied to sliding bearings in marine machinery and equipment, but their low bonding force, poor thermal conductivity and weak oleophilicity result in insufficient anti-adhesive wear performance. To solve this problem, the tex...
In this paper, a series of polymer composites made from acrylonitrile-styrene-acrylate (ASA) and poly (ether ether ketone) (PEEK) were manufactured. ASA acts as a polymer matrix while PEEK is loaded in the form of micro-particles that act as a reinfo...
Titanium powders and hydroxyapatite powders were used to fabricate the titanium and hydroxyapatite composite coating (Ti/Ti/HA) on the Polyetheretherketone (PEEK) by vacuum plasma spraying (VPS). The phase composition and morphology of the Ti/Ti/HA c...
The aim of this study was to assess the performance of a new vacuum plasma sprayed (VPS) titanium-coated carbon/polyetheretherketone (PEEK) cage under first use clinical conditions. Forty-two patients who underwent a one or two segment transforaminal...
This study investigated the effect of different gaseous plasma surface treatments on the shear bond strength between unfilled polyetheretherketone (PEEK) and veneering composite resin. The study followed ISO 10477 guidelines in preparing, bonding, an...
Continuous carbon fiber (CF)-reinforced poly (ether ether ketone) (PEEK) composites have excellent mechanical properties, but their processing techniques are limited. Therefore, we promoted a braiding method based on the hybrid fiber method by hot-co...
Addressing issues such as corrosion and the eccentric wear of metal tubing strings, low heating efficiency, and high operation and maintenance costs of lifting systems in heavy-oil extraction, core equipment comprising carbon-fiber-reinforced PEEK (P...
With the aim of promoting the qualities for total hip joint replacement, the wettability and tribological behaviors of PEEK composites pins with two sets of different fillers (PEEK/CF or PEEK/CF/PTFE/graphite) against Co-Cr alloy discs with five cate...
NaCl particles were added into Polyetheretherketone (PEEK) and its composites to produce porous PEEK-based materials by washing NaCl away after the high-temperature compression molding process. After that, an ionic liquid was added into the porous ma...
Fused deposition modeling (FDM)-based three-dimensional (3D) fabrication offers a viable approach to manufacturing highly customized carbon fiber-reinforced polyether ether ketone (CFR-PEEK) components with complex geometries. However, the mechanical...
This study introduces a novel composite construction material composed of lunar regolith combined with PEEK in dry powder form. The work demonstrates significant advantages over alternative methods, primarily by reducing production power consumption...
Despite wide applications in mechanical transmission components, sparked with extraordinary wear resistance, polymeric composites face the challenges of reinforcement agglomeration. In this work, deformation-driven processing was proposed to prepare...
Fused deposition modeling (FDM) is a rapidly growing three-dimensional (3D) printing technology and has great potential in medicine. Polyether-ether-ketone (PEEK) is a biocompatible high-performance polymer, which is suitable to be used as an orthope...
With the rapid rise of new technologies such as 5G and artificial intelligence, electronic products are becoming smaller and higher power, and there is an increasing demand for electromagnetic interference shielding and thermal conductivity of electr...
In the present work, an ultrasonic, an induction, and a through transmission laser welding were compared to join carbon fibre reinforced polyetheretherketone (CF/PEEK) composites. The advantages and drawbacks of each process are discussed, as well as...
Molecular dynamics (MD) simulations were first employed to achieve the optimal sintering temperature of carboxyl-functionalized graphene (GNS-COOH)-modified polyether ether ketone (PEEK)/polytetrafluoroethylene (PTFE) composites. A model of GNS-COOH/...
Polyether ether ketone (PEEK) is a high-performance thermoplastic widely used in aerospace, automotive, and medical applications due to its exceptional strength, heat resistance, and chemical stability. However, warpage and mechanical property variat...
Thermal kinematics in two-layer systems, analogous to those employed in plain bearings, are investigated. The systems are based on a PEEK/CF30 composite, considered an established alternative to traditional babbitt alloys. Experimental modelling of t...
The mechanical and tribological properties of polyetheretherketone (PEEK)- and PEEK + PTFE (polytetrafluoroethylene)-based composites loaded with and four types of nanoparticles (carbonaceous, metallic, bimetal oxide, and ceramic) under metal- and ce...
The interfacial properties between carbon fiber (CF) and thermoplastic resin are relatively weak, which can be problematic for composites in structural applications. Improving the surface roughness of CF is regarded as an effective way to enhance the...
To research the effect of hydrogen permeation on the friction characteristics of the seal materials on the hydrogen equipment, the molecular models of 10% PEEK/PTFE composites and its frictional models were established, respectively, and molecular dy...
This study presents a U-Net-based automatic segmentation framework for quantitative analysis of surface morphology in a PEEK-based composite following tribological testing. Controlled Pin-on-Disc tests were conducted to characterize tribological perf...
Polytetrafluoroethylene (PTFE) is a self-lubricating material but has poor wear resistance. The wear resistance of the composites was enhanced by the incorporation of polyetheretherketone (PEEK), whereas the friction-reducing performance was compromi...
Polyetheretherketone (PEEK) is a high-performance, biocompatible polymer with remarkable mechanical properties, making it a promising candidate for medical implants. However, its intrinsic radiolucency poses a challenge for post-operative imaging. Th...
An experimental investigation on the resistance welding of carbon-fiber-reinforced polyetheretherketone (PEEK) composite laminate using three types of stainless steel (SS) meshes with different sizes and electrical resistances as heating elements is...
of 7